Engineering cellulose nanofibre suspensions to control filtration resistance and sheet permeability

Li, Qing, Raj, Praveena, Husain, Fatema Abbas, Varanasi, Swambabu, Rainey, Tom, Garnier, Gil, & Batchelor, Warren (2016) Engineering cellulose nanofibre suspensions to control filtration resistance and sheet permeability. Cellulose, 23(1), pp. 391-402.

View at publisher


This study examines and quantifies the effect of adding polyelectrolytes to cellulose nanofibre suspensions on the gel point of cellulose nanofibre suspensions, which is the lowest solids concentration at which the suspension forms a continuous network. The lower the gel point, the faster the drainage time to produce a sheet and the higher the porosity of the final sheet formed. Two new techniques were designed to measure the dynamic compressibility and the drainability of nanocellulose–polyelectrolyte suspensions. We developed a master curve which showed that the independent variable controlling the behaviour of nanocellulose suspensions and its composite is the structure of the flocculated suspension which is best quantified as the gel point. This was independent of the type of polyelectrolyte used. At an addition level of 2 mg/g of nanofibre, a reduction in gel point over 50 % was achieved using either a high molecular weight (13 MDa) linear cationic polyacrylamide (CPAM, 40 % charge), a dendrimer polyethylenimine of high molecular weight of 750,000 Da (HPEI) or even a low molecular weight of 2000 Da (LPEI). There was no significant difference in the minimum gel point achieved, despite the difference in polyelectrolyte morphology and molecular weight. In this paper, we show that the gel point controls the flow through the fibre suspension, even when comparing fibre suspensions with solids content above the gel point. A lower gel point makes it easier for water to drain through the fibre network,reducing the pressure required to achieve a given dewatering rate and reducing the filtering time required to form a wet laid sheet. We further show that the lower gel point partially controls the structure of the wet laid sheet after it is dried. Halving the gel point increased the air permeability of the dry sheet by 37, 46 and 25 %, when using CPAM, HPEI and LPEI, respectively. The resistance to liquid flow was reduced by 74 and 90 %, when using CPAM and LPEI. Analysing the paper formed shows that sheet forming process and final sheet properties can be engineered and controlled by adding polyelectrolytes to the nanofibre suspension.

Impact and interest:

4 citations in Scopus
4 citations in Web of Science®
Search Google Scholar™

Citation counts are sourced monthly from Scopus and Web of Science® citation databases.

These databases contain citations from different subsets of available publications and different time periods and thus the citation count from each is usually different. Some works are not in either database and no count is displayed. Scopus includes citations from articles published in 1996 onwards, and Web of Science® generally from 1980 onwards.

Citations counts from the Google Scholar™ indexing service can be viewed at the linked Google Scholar™ search.

ID Code: 90033
Item Type: Journal Article
Refereed: Yes
Keywords: Cellulose nanofibre, Gel point, Permeability, Dewatering, Polyelectrolyte, CPAM, PEI
DOI: 10.1007/s10570-015-0790-0
ISSN: 0969-0239
Subjects: Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > CHEMICAL ENGINEERING (090400)
Divisions: Current > QUT Faculties and Divisions > Science & Engineering Faculty
Copyright Owner: Copyright 2015 Springer Science+Business Media Dordrecht
Deposited On: 06 Nov 2015 00:08
Last Modified: 26 Jun 2017 06:01

Export: EndNote | Dublin Core | BibTeX

Repository Staff Only: item control page