Past > QUT Faculties & Divisions > Faculty of Built Environment and Engineering

QUT (40648)
- Past (17028)
  - QUT Faculties & Divisions (14751)
    - Faculty of Built Environment and Engineering (7257)

Group by: Item Type | Date | No Grouping

Number of items at this level: 7257.

Book

Ling, Robin S.M., Lee, A.J. Clive, Gie, Graham A., Timperley, A. John, Hubble, Matthew J.W., Howell, Jonathan R., et al. (Eds.) (2010) The Exeter Hip. 40 Years of Innovation in Total Hip Arthroplasty. Exeter Hip Publishing, Exeter, UK, pp. 195-200.

Kajewski, Stephen L., Brameld, Gerald H., Thambiratnam, David, & Hampson, Keith D. (Eds.) (1997) Experimental investigation into the effects of post-tensioning on multi-level formwork load distribution. Physical Infrastructure Centre, Queensland University of Technology, Brisbane.

Lawry, Simon & Wrigley, Cara (Eds.) (2008) Faculty of Built Environment and Engineering Design Theme Conference 2008 Conference Proceedings. QUT Press, Brisbane, QLD.

Corke, Peter & Sukkarieh, Salah (Eds.) (2006) Field and Service Robotics Results of the 5th International Conference. Springer Tracts in Advanced Robotics, 25. Springer.

Bell, John M., Cheng, Yan, Lin, Ye, & Liangchi, Zhang (Eds.) (2008) Frontiers in Materials Science and Technology. Trans Tech Publications Ltd, Switzerland.

Taylor, Mark & Preston, Julieanna (Eds.) (2006) Intimus : interior design theory reader. Wiley-Academy (John Wiley and Sons), United Kingdom, Chichester.

223

Metaxiotis, Kostas, Carrillo, Francisco Javier, & Yigitcanlar, Tan (Eds.) (2010) Knowledge-based development for cities and societies : an integrated multi-level approach. Premier Reference Source. IGI Global, Hershey, Pa.

Holt-Damant, Kathi & O'Neill, Hugh (Eds.) (1996) Measured drawings : Beijing courtyard houses. Faculty of Architecture Building and Planning Publications Unit, University of Melbourne, Melbourne.

159

Xiao, Yin (Ed.) (2012) Mesenchymal stem cells. Cell Biology Research Progress. NOVA Science Publishers, New York.

224

Kajewski, Stephen L., Brameld, Gerald H., Thambiratnam, David P., & Hampson, Keith D. (Eds.) (1996) Multi-level formwork load distribution : a state-of-the-art report. Research report / Physical Infrastructure Centre. Physical Infrastructure Centre, Queensland University of Technology, Brisbane.

Holt-Damant, Kathi & Sanders, Paul S. (Eds.) (2005) Proceedings from the Third International Conference of the Association of Architecture Schools of Australia. University of Queensland & Queensland University of Technology, Brisbane, Qld.

Caldas, Carols, O'Brien, William, Chi, Seokho, Gong, Jie, & Luo, Xiaowei (Eds.) (2009) Proceedings of the 2009 International Symposium on Automation and Robotics in Construction (ISARC 2009). International Association for Automation and Robotics in Construction (IAARC).

Brisbin, Christopher A. (Ed.) (2008) Review 2007: Architectural projects. QUT: School of Design Publications, Brisbane, Australia.

Brisbin, Christopher A. (Ed.) (2008) Review 2008: Architecture projects. QUT: School of Design Publications, Brisbane, Australia..

Chan, Tommy H.T. & Thambiratnam, David P. (Eds.) (2011) Structural health monitoring in Australia. Nova Science Publishers, Hauppauge NY.

Taylor, Mark (Ed.) (2003) Surface consciousness. Architectural Design, 73 (2). Academy Editions (John Wiley and Sons), United Kingdom, London.

Yigitcanlar, Tan (Ed.) (2010) Sustainable urban and regional infrastructure development : technologies, applications and management. Premier Reference Source. IGI Global, Hershey, Pa.

295

Newton, Peter, Hampson, Keith D., & Drogemuller, Robin (Eds.) (2009) Technology, design and process innovation in the built environment. Taylor and Francis, Abingdon.

Chung, Edward & Dumont, Andre-Gilles (Eds.) (2009) Transport simulation : beyond traditional approaches. EPFL Press/CRC Press, Lausanne, Switzerland.

Agarwal, K. K., Srivastava, Rahul, & Mishra, Sanjay K. (2005) Himalayan Orogen : foreland interaction. Special publication of the Palaeontological Society of India, 2. Palaeontological Society of India, Department of Geology, University of Lucknow, Lucknow, India.

Armstrong, Helen B., Seto, Jan M., & O'Hare, Danny J. (2001) Report 4: Reports of the Case Studies. Investigating Queensland's Cultural Landscapes: Contested Terrains. Cultural Landscape Research Unit, QUT, Brisbane.

2,570

Baggott, Martin, Ferris, David J., Macfarlane, Ian, Nikandros, George, & Venn-Brown, Chris (2004) New Railway Environment - a multidisciplinary business concept. Engineers Media, Crows Nest, N.S.W..

Baratloo, Mojdeh, Holt-Damant, Kathi, Wigley, Mark, Frampton, Kenneth, Wright, Gwendolyn, Grava, Sigurd, et al. (2009) Emerging urban futures in land water infrastructure, new model cities South East Queensland. Emerging Urban Futures : New Model Cities, 1 (19). Graduate School of Architecture, Planning and Preservation, Columbia University & the University of Queensland, New York.

Bevrani, Hassan (2009) Robust Power System Frequency Control. Power Electronics and Power Systems. Springer, New York, USA.

Birkeland, Janis (2002) Design for sustainability : a sourcebook of integrated, eco-logical solutions. Earthscan Publications, United Kingdom, London.

Birkeland, Janis (2008) Positive Development : From Vicious Circles to Virtuous Cycles Through Built Environment Design. Earthscan, United Kingdom, London.

Blackler, Alethea L. (2008) Intuitive interaction with complex artefacts : empirically-based research. VDM Verlag, Saarbrücken, Germany.

326

Brott, Simone (2011) Architecture for a free subjectivity : Deleuze and Guattari at the Horizon of the Real. Ashgate Publishing Limited, Surrey.

Chamorro-Koc, Marianella (2008) Usability, experience and context-of-use : the design of product usability. VDM Verlag Dr. Müller Aktiengesellschaft & Co. KG, Germany, Saarbrücken.

Chikolwa, Bwembya (2009) Development and structuring of CMBS in Australia. VDM Verlag, Saarbruecken, Germany.

Coffey, Vaughan (2010) Understanding Organisational Culture in the Construction Industry. Spon Research. Spon Press/ Taylor & Francis, Abingdon, Oxon.

Corke, Peter (2011) Robotics, Vision and Control : Fundamental algorithms in MATLAB. Springer Tracts in Advanced Robotics, 73. Springer, Germany.

Davis, Lloyd E. & Bunker, Jonathan M. (2007) Heavy Vehicle Suspensions – Testing and Analysis. A literature review. Department of Main Roads and the Queensland University of Technology, Brisbane, Queensland, Australia.

1,111

Davis, Lloyd E. & Bunker, Jonathan M. (2009) Suspension testing of 3 heavy vehicles - dynamic wheel force analysis - Report. State of Queensland (Department of Main Roads) & Queensland University of Technology, Brisbane, Queensland, Australia.

616

Davis, Lloyd E. & Bunker, Jonathan M. (2008) Suspension testing of 3 heavy vehicles – methodology and preliminary frequency analysis. Report. State of Queensland (Department of Main Roads) & Queensland University of Technology, Brisbane, Queensland.

546

Dawson, Edward P., Duncan, William D., Christensen, Sharon A., Black, Peter J., Foo, Ernest, Du, Rong, et al. (2006) eTendering - Security and Legal Issues. Cooperative Research Centre for Construction Innovation, for Icon.Net Pty Ltd., Brisbane. (Unpublished)

874

Evans, Peter & Hargreaves, Douglas (2010) Values-driven leadership. Tilde University Press, Prahran, VIC..

Ewert, Alan W., Bissix, Glynn C., & Baker, Douglas C. (2004) Integrated Resource and Environmental Management : The Human Dimension. CABI Publishing, Oxfordshire, UK.

Frossard, Laurent A., O'Riordan, Alison, & Goodman, Scott (2009) Performance analysis of stationary throwers : data for evidence-based classification (First edition). Queensland University of Technology, Brisbane, Australia.

262

Frossard, Laurent A., O'Riordan, Alison, & Goodman, Scott (2009) Performance analysis of stationary throwers : data for evidence-based officiating(First edition). Queensland University of Technology, Brisbane, Australia.

216

Frossard, Laurent A., O'Riordan, Alison, & Goodman, Scott (2009) Performance analysis of stationary throwers : data for evidence-based training. Queensland University of Technology, Brisbane, Australia.

234

Fussel, Tom, Beazley, Scott, Aranda-Mena, Guillermo, Chevez, Agustin, Crawford, John, Succar, Bilal, et al. (2009) National guidelines for digital modelling. Icon.Net Pty Ltd., Brisbane, QLD.

642

Fussel, Tom, Beazley, Scott, Aranda-Mena, Guillermo, Chevez, Agustin, Crawford, John, Succar, Bilal, et al. (2009) National guidelines for digital modelling : case studies. CRC for Construction Innovation, Brisbane, QLD.

251

Ghosh, Arindam & Ledwich, Gerard F. (2002) Power Quality Enhancement using Custom Power Devices. Kluwer Academic Publishers, Boston, USA.

Guaralda, Mirko (2006) Le infrastrutture viarie dismesse o declassate ed il progetto di paesaggio. Libreria CLUP Soc. Coop., Segrate (MI) - Italy.

Heywood, Philip R. (2011) Community planning : integrating social and physical environments. Wiley-Blackwell & Sons, Ltd. , United Kingdom, West Sussex.

Heywood, Philip R. (1997) The Emerging Social Metropolis: Successful Planning Initiatives in Five New World Metropolitan Regions. Progress in Planning, 47. Pergamon/Elsevier, Exeter, UK.

Heywood, Philip R., Baker, Douglas C., & Bajracharya, Bhishna (2004) Re-booting regional planning in South East Queensland. Urban Policy Program, Griffith University, Brisbane, Qld.

Heywood, Philip, R., Crane, Philip R., Egginton, Anita, & Gleeson, Jim (1998) Out and About: In or Out,? Better Outcomes from Young People's Use of Public & Community Space in the City of Brisbane. Brisbane City Council, Brisbane.

752

Hudson, Brian (2001) The Waterfalls of Jamaica. The University of West Indies Press, Kingston, Jamaica.

Hudson, Brian J. (2008) How I didn't become a Beatle : Liverpool in the 1950s and 60s. History Press, Stroud, Gloucestershire.

Hudson, Brian J. & Higman, B. W. (2009) Jamaican place names. The University of West Indies Press, Jamaica.

Hussain, Zahir, Sadik, Amin, & O'Shea, Peter J. (2011) Digital signal processing. Springer-Verlag Berlin Heidelberg, Berlin.

Kajewski, Stephen L. & Weippert, Achim (2003) Online Remote Construction Management: A State-of-the-Art Report. Queensland University of Technology, Brisbane.

556

Kajewski, Stephen L., Weippert, Achim, & Tilley, Paul A. (2003) Online Remote Construction Management: Construction Project Case Studies. Queensland University of Technology, Brisbane.

1,189

Kajewski, Stephen L. & Weippert, Archim (2003) Online Remote Construction Management; A State-of-the-Art Report. School of Construction Management and Property, Queensland University of Technology, Brisbane.

168

Kajewski, Stephen L., Weippert, Archim, & Tilley, Paul (2003) Online Remote Construction Management Part A: Construction Project Case Studies. School of Construction Management and Property, Queensland University of Technology, Brisbane.

256

Kraal, Ben J. (2008) Considering use and design of speech recognition systems : investigating users of complex socio-technical systems. Verlag VDM.

Lehmann, Steffen (2004) Der Web Brasiliens in die Moderne. LIT-Verlag, Muenster, Germany.

Lin, Tian Ran (2009) Vibration of ship structures and its control. VDM Publishing House, Germany.

Lingard, Helen & Rowlinson, Stephen (2005) Occupational health and safety in construction project management. Spon Press, United States of America, New York.

Liu, Gui-Rong & Gu, YuanTong (2005) An introduction to meshfree methods and their programming. 1, 1. Springer, Berlin.

Manley, Karen (2007) Being the best. CRC for Construction Innovation, Brisbane.

129

Metaxiotis, Kostas, Carrillo, Francisco Javier, & Yigitcanlar, Tan (2010) Knowledge-based development for cities and societies : integrated multi-level approaches. Premier Reference Source. IGI Global, United States of America.

378

Miller, Evonne (2009) Media and body image : exploring the discrepancy between body perception and satisfaction. VDM Verlag, Saarbrücken, Germany.

O'Hare, Danny J., Adkins, Barbara A., Avery, Tracey, & Laurens, Susan (2001) Report 3: Contests and Management Issues. Investigating Queensland's Cultural Landscapes: Contested Terrains Series. Cultural Landscape Research Unit, QUT, Brisbane.

444

Peach, Deborah, Taylor, Peter, & Peters, Joanna (1998) Supporting Students for Flexible Learning. Teaching through Flexible Learning Resources. Griffith Institute of Higher Education, Brisbane, QLD.

Raxworthy, Julian R. & Blood, Jessica (2004) The MESH book : landscape / infrastructure. RMIT Publishing, Australia, Victoria, Melbourne.

Satherley, Shannon D. (2010) Reconnecting the interrupted landscape : a cultural landscape approach to Australian open-cut coal mining landscapes. Lambert Academic Publishing, Saarbrücken.

Sim, Jean C. (2001) Landscape Design Theory Primer. School of Design and Built Environment, Q.U.T., Brisbane, QLD.

2,585

Sim, Jean C., Armstrong, Helen B., Osborne, Ray, & Hart, Victor G. (2001) Report 1: Setting the Theoretical Scene. Investigating Queensland's Cultural Landscapes: Contested Terrains Series. Cultural Landscape Research Unit, QUT, Brisbane.

496

Sim, Jean C., Hudson, Brian J., O'Hare, Daniel J., Armstrong, Helen B., Baker, Walter, & Hayes, Lincoln T. (2001) Report 2: Thematic Study of the Cultural Landscape of Queensland. Investigating Queensland's Cultural Landscapes: Contested Terrains Series. Cultural Landscape Research Unit, QUT, Brisbane.

3,595

Smit, Debra K. & Coffey, Vaughan (2009) Study guide in construction management for low-rise and high-rise construction. Pearson Education Australia, Australia.

Taylor, Mark, Preston, Julieanna, & Charleson, Andrew (2002) Moments of resistance. Archadia Press, Sydney.

Thomas, Glenn S. (2002) S.A.D. = Sustainable and delightful: A designer's guide to sustainable site planning. Queensland University of Tecnology, Brisbane, Queensland.

1,104

Thomas, Glenn S., Sim, Jean C., & Poulton, Delwynn V. (2001) Planting design: An exploration of emerging theoretical frameworks to support sustainable landscape design. Queensland University of Technology, Brisbane, Queensland.

1,698

Walker, D. H.T., Hampson, Keith D., & Peters, Renaye (2000) Relationship Based Procurement Strategies for the 21st Century. AusInfo, Canberra.

106

Wang, Jun (2003) Abrasive Waterjet Machining of Engineering Materials. Trans Tech Publications Ltd, Zurich, Switzerland.

Weir, Ian James (2007) Lightsite. Faculty of Architecture, Landscape & Visual Arts, University of Western Australia, Perth, Western Australia.

Wrigley, Cara (2011) Visceral hedonic rhetoric : exploring the design of interactive products. VDM Publishers, Saarbrücken, Germany.

Wrigley, Cara & Gomez, Rafael E. (2010) Design horizons : provoking thoughts. Queensland University of Technology Press, Brisbane, QLD.

Yigitcanlar, Tan (2008) Creative urban regions : harnessing urban technologies to support knowledge city initiatives. Information Science Reference Publishing (IGI Global), Hershey, Penn..

Yigitcanlar, Tan (2008) Knowledge-Based Urban Development : Planning and Applications in the Information Era. Information Science Reference Publishing (IGI Global), United States of America, Pennsylvania, Hershey.

Zare, Firuz (2008) Power electronics education electronic book (PEEEB). Firuz Zare.

Zheng, Zuduo (2011) Empirical analysis of freeway traffic oscillation : its safety impact and evolution. VDM Publishing House LTD, Germany.

Ziri-Castro, Karla I. & Scanlon, William (2009) Wireless channel modelling for indoor populated environments : statistical characterization of narrowband channels at 2.45 Ghz and 5.2 Ghz. VDM Verlag, Berlin.

Book Chapter

Abed-Meraim, Karim, Belouchrani, Adel, Boashash, Boualem, & Nguyen, Trung (2005) Time-Frequency Signal Processing for Wireless Communications. In Ibnakahla, M (Ed.) Signal Processing for Mobile Communications Handbook. CRC Press, United States of America, Massachusetts, Danvers, pp. 1-41.

Acharya, A., Smith, B. N., Barker, R., Crawford, R. W., & Timperley, A. J. (2010) Operative technique : acetabulum. In Ling, Robin S.M., Lee, A.J. Clive, Gie, Graham A., Timperley, A. John, Hubble, Matthew J.W., Howell, Jonathan R., et al. (Eds.) The Exeter Hip. Exeter Hip Publishing, Exeter, UK, pp. 171-184.

Adam, Clayton J. (2006) Spine Biomechanics. In Encyclopedia of Biomaterials and Biomedical Engineering. Marcel Dekker, New York.

Adam, Clayton J. & Dougherty, Geoff (2011) Applications of medical image processing in the diagnosis and treatment of spinal deformity. In Dougherty, Geoff (Ed.) Medical Image Processing : Techniques and Applications. Springer, pp. 227-248.

Armstrong, Helen (2001) Investigating Queensland's Cultural Landscapes: Whose Heritage? In Heritage Landscapes: Understanding Place And Communities. Southern Cross University Press, Lismore, NSW, pp. 81-90.

Au-Yeung, Benson, Yigitcanlar, Tan, Mayere, Severine, & Lau, Chean-Piau (2010) Brisbane urban growth model : an integrated infrastructure management framework for Brisbane, Australia. In Yigitcanlar, Tan (Ed.) Sustainable urban and regional infrastructure development : technologies, applications and management. IGI Global, Information Science Reference, Hershey, Pennsylvania, pp. 277-294.

158

AuYeung, Benson, Yigitcanlar, Tan, & Mayere, Severine (2010) Integrated sustainable urban infrastructure management: the Brisbane urban growth model. In Yigitcanlar, Tan (Ed.) Rethinking Sustainable Development : Urban Management, Engineering, and Design. IGI Global, Engineering Science Reference, Hershey Pa, pp. 38-55.

Azemi, Ghasem, Boashash, Boualem, & Senadji, Bouchra (2005) Mobile Velocity Estimation for Wireless Communications. In Ibnkahla, M (Ed.) Signal Processing for Mobile Communications Handbook. CRC Press, United States of America, Florida, pp. 1-34.

Bajracharya, Bhishna & Khan, Shahed (2006) Sustainability frameworks for transit oriented development in south east Queensland. In Childs, Iraphne R. & Hudson, Brian (Eds.) Queensland : geographical perspectives. The Royal Geographical Society of Queensland Inc., Australia, Queensland, Brisbane, pp. 31-54.

Baker, Brendan J., Vogt, Robert J., McLaren, Mitchell L., & Sridharan, Sridha (2009) Scatter difference NAP for SVM speaker recognition. In Massimo, Tistarelli & Nixon, Mark S. (Eds.) Advances in Biometrics : Third International Conferences, ICB 2009, Alghero, Italy, June 2-5, 2009, Proceedings. Springer , Berlin Heidelberg, pp. 464-473.

Baker, Douglas & Rapaport, Eric (2005) The Science of Assessment: Identifying and Predicting Environmental Impacts. In Hanna, K (Ed.) Environmental Impact Assessment: Practice and Participation. Oxford University Press, Canada, pp. 33-52.

Baker, Douglas C. (2006) Between a Rock and a Hard Place: Regional Planning for the Extractive Industry in SE Queensland. In Childs, Iraphne R.W. & Hudson, Brian J. (Eds.) Queensland: Geographical Perspectives. Royal Geographical Society of Queensland, Brisbane, Qld., pp. 73-89.

Baker, Douglas C. & Freestone, Robert (2010) The airport city : a new business model for airport development. In Macario, Rosario & Van de Voorde, Eddy (Eds.) Critical Issues in Air Transport Economics and Business. Routledge/Taylor and Francis Group, Oxon, United Kingdom, pp. 150-164.

Baker, Douglas C. & Rapaport, Eric (2005) The science of assessment : identifying and predicting environmental impacts. In Hanna, Kevin S. (Ed.) Environmental Impact Assessment : Practice and Participation. Oxford University Press, Ontario, pp. 33-52.

Baker, Douglas C., Sipe, Neil G., & Gleeson, Brendan J. (2008) Performance-based planning: perspectives from the United States, Australia and New Zealand. In Harper, Thomas L., Gar-On Yeh, Anthony, & Costa, Heloisa (Eds.) Dialogues in urban and regional planning 3. Routledge, New York ; London, pp. 264-288.

Ball, David & Wyeth, Gordon (2004) Multi-robot control in highly dynamic, competitive environments. In Polani, Daniel, Browning, Brett, Bonarini, Andrea, & Yoshida, Kazuo (Eds.) RoboCup 2003 : Robot Soccer World Cup VII. Springer Berlin / Heidelberg, pp. 385-396.

Barkat, Braham & Boashash, Boualem (2003) IF Estimation of FM Signals in Multiplicative Noise. In Boashash, Boualem (Ed.) TIme-Frequency Signal Analysis and Processing: A Comprehensive Reference. Elsevier Ltd, Oxford, United Kingdom, pp. 457-464.

Barkat, Braham & O'Shea, Peter (2003) Analysis of Polynomial FM Signals in Additive Noise. In Boashash, Boualem (Ed.) TIme-Frequency Signal Analysis and Processing: A Comprehensive Reference. Elsevier Ltd, Oxford, United Kingdom, pp. 447-456.

Bartold, P. Mark & Xiao, Yin (2003) Use of a matrix scaffold for tissue engineering and bone regeneration. In Ellingsen, Jan Eirik & Lyngstaadas, S. Petter (Eds.) Bio-implant interface : improving biomaterials and tissue reactions. CRC Press, Boca Raton, Fla., pp. 243-254.

Baum, Scott, Yigitcanlar, Tan, & O'Connor, Kevin (2008) Creative Industries and the Urban Hierarchy : The Position of Lower Tier Cities in the Knowledge Economy. In Yigitcanlar, Tan, Velibeyoglu, Koray, & Baum, Scott (Eds.) Knowledge-Based Urban Development: Planning and Applications in the Information Era. IGI Global, Information Science Reference, United States of America, Pennsylvania, Hershey, pp. 42-57.

Bell, John, Skryabin, Igor, & Matthews, Jeremy (2002) Smart windows. In Schwartz, M. (Ed.) Encyclopedia of smart materials. John Wiley and Sons, United States of America, New York, pp. 1134-1146.

Bell, John M. (2005) Is 'smart' always 'sustainable' in building design and construction? In Yang, Jay, Brandon, Peter S., & Sidwell, A.C. (Eds.) Smart and sustainable built environments. Blackwell Publishing, United States of America, Massachusetts, Malden, pp. 176-186.

Birtwhistle, David, Cash, Gregory, George, Graeme, Goss, Benjamin, Krivda, Andreaj, & Liu, Heping (2001) Field Monitoring of the Ageing of Composite High Voltage Insulators. In Ageing Studies And Lifetime Extension Of Materials. Kulwer Academic/ Plenum Publishers, New York, USA, pp. 225-237.

Boashash, Boualem (2001) Introduction to Time-Frequency Signal Analysis. In Debnath, L (Ed.) Wavelet Transforms And Time-frequency Signal Analysis. Birkhauser, Boston, USA, pp. 321-380.

Boashash, Boualem (2003) Theory of Quadratic TFDs. In Boashash, Boualem (Ed.) TIme-Frequency Signal Analysis and Processing: A Comprehensive Reference. Elsevier Ltd., Oxford, United Kingdom, pp. 59-81.

Boashash, Boualem, Colitz, Paul, & Mesbah, Mostefa (2003) Time-Frequency Detection of EEG Abnormalities. In Boashash, Boualem (Ed.) TIme-Frequency Signal Analysis and Processing: A Comprehensive Reference. Elsevier Ltd, Oxford, United Kingdom, pp. 663-670.

Boashash, Boualem & Hussain, Zahir (2003) IF Estimation for Multicomponent Signals. In Boashash, Boualem (Ed.) TIme-Frequency Signal Analysis and Processing: A Comprehensive Reference. Elsevier, Oxford, United Kingdom, pp. 437-446.

Boashash, Boualem, Mathew, Joseph, & Mesbah, Mostefa (2003) Time-Frequency Based Machine Condition Monitoring and Fault Diagnosis. In Boashash, Boualem (Ed.) TIme-Frequency Signal Analysis and Processing: A Comprehensive Reference. Elsevier Ltd, Oxford, United Kingdom, pp. 671-682.

Boashash, Boualem & Mesbah, Mostefa (2003) Signal Enhancement by Time-Frequency Peak Filtering. In Boashash, Boualem (Ed.) TIme-Frequency Signal Analysis and Processing: A Comprehensive Reference. Elsevier Ltd, Oxford, United Kingdom, pp. 489-497.

Boashash, Boualem & Mesbah, Mostefa (2002) Time-frequency Methodology for Newborn Electroencephalographic Seizure Detection. In Papandreou-Suppappola, A (Ed.) Applications in Time-frequency Signal Processing. CRC Press LLC, Boca Raton, USA, pp. 339-369.

Boashash, Boualem & Putland, Gavin (2003) Discrete Time-Frequency Distributions and Computation of Discrete Quadratic TFDs. In Boashash, Boualem (Ed.) TIme-Frequency Signal Analysis and Processing: A Comprehensive Reference. Elsevier Ltd., Oxford, United Kingdom, pp. 29-57.

Boashash, Boualem & Putland, Gavin (2003) Polynomial Wigner-Ville Distributions and Design of High-Resolution Quadratic TFDs with Separable Kernals. In Boashash, Boualem (Ed.) TIme-Frequency Signal Analysis and Processing: A Comprehensive Reference. Elsevier Ltd, Oxford, United Kingdom, pp. 3-27.

Boashash, Boualem & Sucic, Victor (2003) High Performance Time-Frequency Distributions for Practical Applications. In Debnath, L (Ed.) Wavelets and Signal Processing. Birkhauser, Boston, MA, USA, pp. 135-175.

Boashash, Boualem & Sucic, Victor (2003) Resolution Performance Assessment for Quadratic TFDs. In Boashash, Boualem (Ed.) TIme-Frequency Signal Analysis and Processing: A Comprehensive Reference. Elsevier Ltd, Oxford, United Kingdom, pp. 305-314.

Boulton-Lewis, Gillian M., Buys, Laurie, Edwards, Sylvia L., & Partridge, Helen (2009) Ageing, learning, technology, and health management. In Dwivedi, Ashish (Ed.) Handbook of Research on Information Technology Management and Clinical Data Administration in Healthcare. Information Science Reference, Hershey, PA, pp. 674-689.

Brereton, Margot (2009) Designing from somewhere : a located, relational and transformative view of design. In Binder, Thomas, Löwgren, Jonas, & Malmborg, Lone (Eds.) (Re)searching the Digital Bauhaus. Springer, London, pp. 100-119.

Brereton, Margot (2004) Distributed cognition in engineering design : negotiating between abstract and material representations. In Goldschmidt, Gabriela & Porter, William L. (Eds.) Design representation. Springer, United States of America, New York, pp. 83-103.

Bridge, Adrian (2010) Value for money : procuring infrastructure. In Yigitcanlar, Tan (Ed.) Sustainable Urban and Regional Infrastructure Development : Technologies, Applications and Management. Information Science Reference (IGI Global) , Hershey, PA., pp. 295-309.

Brisbin, Christopher A. (2009) optical_affects: fenestrations and optical fascinations in the re-embodied architecture of South-East Queensland. In McNamara, Andrew E. (Ed.) Sweat : Sub-Tropicality in Art, Design and Architecture. Institute of Modern Art. (In Press)

Brunello, Lara R., Bunker, Jonathan M., Fabbro, Sandro, Migliorini, Franco, & Ferrara, Renzo (2012) High speed rail and regional competitiveness. In Bulu, Melih (Ed.) City Competitiveness and Improving Urban Subsystems : Technologies and Applications. Information Science Reference (IGI Global), Hershey, PA, pp. 159-196.

Bunker, Jonathan M. & Ferreira, Luis (2002) Assessing modal performance for freight corridors using an Australian case study. In Yang, Z., Wang, K. C. P., & Mao, B. (Eds.) Traffic and Transportation Studies. American Society of Civil Engineers.

Butler, Z, Corke, Peter, Peterson, R., & Rus, Daniela (2006) Dynamic virtual fences for controlling cows. In Ang, Marcelo. H & Khatib, Oussama (Eds.) Experimental Robotics IX The 9th International Symposium on Experimental Robotics. Springer Berlin / Heidelberg, pp. 513-522.

Buys, Laurie, Miller, Evonne, & Robinson, Karen (2009) Australia. In Whittington, Frank (Ed.) International Handbook on Aging. Praeger Publishers/Greenwood Press, Greenwood, Conn, pp. 126-143. (In Press)

Buzer, Susan (2002) Geography, Technology and Culture. In Gerber, R & Williams, M (Eds.) Geography, Culture and Education. Kluwer Academic Publishers, Dordrecht, The Netherlands, pp. 41-50.

Campoy, Pascual, Correa, Juan F., Mondragón, Ivan, Martínez, Carol, Olivares, Miguel, Mejias, Luis, et al. (2008) Computer vision onboard UAVs for civilian tasks. In Valavanis, Kimon P., Oh, Paul, & Piegl, Les A. (Eds.) Unmanned Aircraft Systems: International Symposium on Unmanned Aerial Vehicles, UAV '08. Springer Netherlands, Dordrecht ; London, pp. 105-135.

Chan, Kwai Hung, Frazer, John H., & Tang, Ming-Xi (2002) An evolutionary framework for enhancing design. In Gero, John S. (Ed.) Artificial Intelligence in Design '02. Kluwer Academic Publishers, The Netherlands, Dordrecht, pp. 383-403.

Chan, Tommy H.T. (2007) Industry-based projects and supervision of students’ work by industry professionals. In Leung, T.P. & Taplin, Margaret (Eds.) Innovations in Professional Education : Practices and Reflections. Prentice Hall, Pearson Education Asia Ltd., Hong Kong, pp. 259-271.

Chan, Tommy H.T., Wong, K. Y., Li, Z.X., & Ni, Y. Q. (2010) Structural health monitoring for long span bridges - Hong Kong experience and continuing into Australia. In Structural Health Monitoring in Australia. NOVA Science Publishers, Inc.

Chan, Tommy H.T., Wong, K.Y., Li, Z.X., & Ni, Yi-Qing (2011) Structural health monitoring for long span bridges : Hong Kong experience & continuing onto Australia. In Chan, Tommy H.T. & Thambiratnam, David P. (Eds.) Structural Health Monitoring in Australia. Nova Publishers, United States of America, pp. 1-32. (In Press)

Chanson, Hubert, Brown, Richard, & Ferris, John (2004) Hydrodynamic and Ecological Study of a Sub-tropical Estuary in Queensland. In Mossa, Michele, Yasuda, Youichi, & Chanson, Hubert (Eds.) Fluvial, Environmental & Coastal Developments in Hydraulic Engineering. Taylor & Francis, Leiden, The Netherlands, pp. 133-149.

Charity, John, Ling, Robin S.M., & Whitehouse, Sarah L. (2010) Clinical results in primary THR. In Ling, Robin S.M., Lee, A.J. Clive, Gie, Graham A., Timperley, A. John, Hubble, Matthew J.W., Howell, Jonathan R., et al. (Eds.) The Exeter Hip. Exeter Hip Publishing, Exeter, pp. 207-230.

Chattopadhyay, Gopi (2004) Learning Package for Mass Education in Developing Countries. In Twentieth Century Development - Some Relevant Issues. NOVA Science Publishers, Inc, Hauppauge, New York, United States, pp. 89-100.

Chawla, Louise, Cushing, Debbie Flanders, Malinin, Laura Healey, Pevec, Illene, & Zuniga, Kelly Draper (2011) Children and the environment. In Oxford Bibliographies. Oxford University Press, Oxford, pp. 1-33.

Chen, Liang, Wiewiora, Anna, & Trigunarsyah, Bambang (2010) Project-based organisations : overcoming lack of trust and social networks within small and medium project teams. In Yigitcanlar, Tan (Ed.) Rethinking sustainable development : planning, infrastructure engineering, design and managing urban infrastructure. Engineering Science Reference, Hershey, Pennsylvania, pp. 271-285.

Chiffoleau, Gwenael J.A., Steinberg, Theodore A., & Veidt, Martin (2003) Ultrasonic Measurement Technique of Burning Metals in Normal and Reduced Gravity. In Steinberg, T.A., Beeson, H.D., & Newton, B.E. (Eds.) Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Tenth Volume, ASTM STP 1454. American Society for Testing and Materials.

Chyba, Monique, Haberkorn, Thomas, & Smith, Ryan N. (2010) Optimization problems for controlled mechanical systems : bridging the gap between theory and application. In Modelling Simulation and Optimization. INTECH, Online, pp. 167-186.

Clegg, Richard & Parakala, Padmaja (2001) Mechanical and Microscopic Features of Hydroxyapatite Coatings on Titanium Substrates with a Bond Coat. In Proceedings Of The 13th International Symposium On Ceramics In Medicine. Trans Tech Publications Ltd, Zurich, Switzerland, pp. 139-142.

Clothier, Reece A. & Walker, Rodney A. (2013) The safety risk management of unmanned aircraft systems. In Valavanis, Kimon P. & Vachtsevanos, George J. (Eds.) Handbook of Unmanned Aerial Vehicles. Springer Science+Business Media B.V., Dordrecht, Netherlands. (In Press)

Corke, Peter (2003) Mobile robot navigation as a planar visual servoing problem. In Jarvis, Raymond. Austin & Zelinsky, Alexander (Eds.) Robotics Research 10th International Symposium. Springer Berlin / Heidelberg, pp. 361-372.

Corke, Peter, Roberts, Jonathan, Cunningham, Jock, & Hainsworth, David (2008) Mining Robotics. In Siciliano, Bruno & Khatib, Oussama (Eds.) Springer handbook of robotics. Springer, Berlin, pp. 1127-1150.

Corke, Peter, Winstanley, C, Dunbabin, M., & Roberts, J. (2006) Dragline automation: Experimental evaluation through productivity trial. In Field and Service Robotics. Springer Berlin / Heidelberg, pp. 459-468.

Cox, Mark, Sridharan, Sridha, Lucey, Simon, & Cohn, Jeffrey (2009) Least-squares congealing for large numbers of images. In 2009 IEEE 12th International Conference on Computer Vision. IEEE Computer Society, pp. 1949-1956.

Crowther, Philip (2009) Designing for disassembly. In Newton, Peter, Hampson, Keith, & Drogemuller, Robin (Eds.) Technology, Design and Process Innovation in the Built Environment. Taylor and Francis, Abingdon, Oxon, pp. 224-237.

Crowther, Philip (1995) H'ani : National Parks and Wildlife Facilities at Springbrook. In Popovic, Vesna, Whitman, Paula, & Hudson, Brian J. (Eds.) Design for the community. Queensland University of Technology, Brisbane, pp. 36-39.

Davidson, Kristiane, Lukies, Ned, & Lehtonen, Debbie (2010) Green transport infrastructure: from motorways to bikeways. In Yigitcanlar, Tan (Ed.) Sustainable Urban and Regional Infrastructure Development: Technologies, Applications and Management edited by Dr. Tan Yigitcanlar. IGI Global, Information Science Reference, United States of America, pp. 62-76.

Dawes, Les & Reeves, Jim (2010) The urban water cycle : towards integrated resource management and more sustainable water management systems. In Yigitcanlar, Tan (Ed.) Sustainable Urban and Regional Infrastructure : Technology, Planning and Management. IGI Global, Hershey Pa., pp. 31-43.

Dean, John & Roberts, Brian (2001) An Economic Development Strategy for Cairns. In Mercuro, N & Smith, P (Eds.) International Review Of Comparative Public Policy Volume 12. Elsevier Science Ltd, Oxford, UK, pp. 61-85.

Demirbilek, Nur & Demirbilek, Oya (2008) Comfort and light. In Lewis, Miles (Ed.) Architectura Elements of Architectural Style. Global Book Publishing Pty Ltd, Lane Cove, N.S.W, pp. 298-319.

Demirbilek, Nur & Eryildiz, Demet I. (2002) Solar architecture. In Energy. Ministry of Education Press, Turkey, Istanbul, pp. 254-288.

Ding, Lan, Drogemuller, Robin, Akhurst, Paul, Hough, Richard, Bull, Stuart, & Linning, Chris (2009) Towards sustainable facilities management. In Newton, Peter, Hampson, Keith, & Drogemuller, Robin (Eds.) Technology, Design and Process Innovation in the Built Environment. Taylor & Francis, Oxon, Abingdon, pp. 373-392.

Dizdaroglu, Didem, Yigitcanlar, Tan, & Dawes, Les A. (2010) Planning for sustainable urban futures : an ecological approach to sustainable urban development. In Yigitcanlar, Tan (Ed.) Rethinking Sustainable Development : Urban Management, Engineering, and Design. IGI Global, Engineering Science Reference, Hershey, Pa, pp. 15-25.

Dodson, Jago, Sipe, Neil G., & Baker, Douglas C. (2010) Transportation and the wheels of growth. In Gleeson, Brendan J. & Steele, Wendy (Eds.) A Climate Growth : Planning South-East Queensland. The University of Queensland Press, St Lucia, Qld, pp. 185-202.

Donnelly, Bill D. & Crawford, Ross W. (2010) Surgical navigation. In Ling, Robin S.M., Lee, A.J. Clive, Gie, Graham A., Timperley, A. John, Hubble, Matthew J.W., Howell, Jonathan R., et al. (Eds.) The Exeter Hip. Exeter Hip Publishing, Exeter, UK, pp. 195-200.

Donnet, Timothy, Keast, Robyn L., & Pickernell, David (2010) Up the junction? Exploiting knowledge-based development through supply chain and SME cluster interactions. In Metaxiotis, Kostas, Carrillo, Francisco Javier, & Yigitcanlar, Tan (Eds.) Knowledge-Based Development for Cities and Societies : Integrated Multi-Level Approaches. IGI Global, Hershey PA, pp. 179-195.

Dowling, Jason A., Boles, Wageeh W., & Maeder, Anthony J. (2007) Visual prostheses for the blind: A framework for information presentation. In Billingsley, John (Ed.) Mechatronics and Machine Vision in Practice. Springer, Berlin/Heidelberg, pp. 275-287.

Drogemuller, Robin (2009) Collaboration using BIM : results of cooperative research centre for construction innovation projects. In Shen, Geoffrey Qiping & Brandon, Peter (Eds.) Collaborative Construction Information Management. Spon Press (Taylor & Francis), United Kingdom, Oxon, Abingdon, pp. 55-67.

Drogemuller, Robin (2008) Virtual prototyping from need to pre-construction. In Brandon, Peter & Kocaturk, Tuba (Eds.) Virtual Futures for Design, Construction and Procurement. Blackwell Science Asia Pty Ltd, Carlton, Vic, pp. 113-130.

Drogemuller, Robin & Ding, Lan (2006) Automated code checking and accessibility. In Aoud, Ghassan, Lee, Angela, & Wu, Song (Eds.) Constructing the future : nD modelling. Taylor and Francis, United Kingdom, London, pp. 126-141.

Drogemuller, Robin, Egan, Stephen, & McDonald, Kevin (2009) Integrated design platform. In Newton, Peter, Hampson, Keith, & Drogemuller, Robin (Eds.) Technology, Design and Process Innovation in the Built Environment. Taylor & Francis, Oxon, Abingdon, pp. 132-153.

Drogemuller, Robin & Frazer, John H. (2008) Digital modelling for sustainability. In Birkeland, Janis (Ed.) Positive Development From Vicious Circles to Virtuous Cycles Through Built Environment Design. Earthscan, London, pp. 307-308.

Drogemuller, Robin, Gokhale, Medha, & Boulaire, Fanny (2009) Design for urban microclimates. In Newton, Peter, Hampson, Keith, & Drogemuller, Robin (Eds.) Technology, Design and Process Innovation in the Built Environment. Taylor & Francis, Oxon, Abingdon, pp. 250-266.

Dunbabin, Matthew & Corke, Peter (2006) Autonomous excavation using a rope shovel. In Corke, Peter & Sukkariah, Salah (Eds.) Field and Service Robotics Results of the 5th International Conference. Springer Berlin / Heidelberg, pp. 555-566.

Dunbabin, Matthew, Usher, Kane, & Corke, Peter (2006) Visual motion estimation for an autonomous underwater reef monitoring robot. In Corke, Peter & Sukkariah, Salah (Eds.) Field and Service Robotics Results of the 5th International Conference. Springer Berlin / Heidelberg, pp. 31-42.

Dunbabin, Matthew, Vasilescu, Iuliu, Corke, Peter, & Rus, Daniela (2008) Experiments with cooperative networked control of underwater robots. In Khatib, Oussama, Kumar, Vijay, & Rus, Daniela (Eds.) Experimental Robotics X. Springer Berlin / Heidelberg, pp. 463-470.

Dur, Fatih, Yigitcanlar, Tan, & Bunker, Jonathan M. (2010) Sustainable transport infrastructure : perspectives for sustainable urban and transport development. In Yigitcanlar, Tan (Ed.) Sustainable Urban and Regional Infrastructure Development : Technologies, Applications and Management. IGI Global, Information Science Reference, Hershey, PA, pp. 44-61.

Dur , Fatih, Yigitcanlar, Tan, & Bunker, Jonathan M. (2010) A decision support system for sustainable urban development : the integrated land use and transportation indexing model. In Yigitcanlar, Tan (Ed.) Rethinking Sustainable Development: Urban Management, Engineering, and Design. IGI Global, Engineering Science Reference, Hershey PA, New York NY, USA, pp. 56-72.

Ecevit, Ahmet, Demirbilek, Nur, Irkli, Demet, & Yalciner, Ugur (1999) Analysis of Increasing Solar Heat Gains and Decreasing Heat Losses of Buildings in Existing and Proposed Mass Housing Settlements. In Atasoy, Basri (Ed.) Journal of the Institute of Science and Technology of Gazi University. Gazi University, pp. 401-417.

Edwards, Amanda P.R., Chiffoleau, Gwenael J.A., Maes, Migue J., & Steinberg, Theodore A. (2003) Instantaneous RRMI of Iron Rods in Reduced Gravity. In Steinberg, T.A., Beeson, H.D., & Newwton, B.E. (Eds.) Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Tenth Volume, ASTM STP 1454. American Society for Testing and Materials.

Ercan, M.F., Fung, Y.F., Ho, T.K., & Cheung, W.L. (2003) Parallel linear system solution and its application to railway power network simulation. In Euro-Par 2003 Parallel Processing. Springerlink, pp. 537-540.

Ferreira, Luis (2005) Rail innovation. In Sayeg, P. & Charles, P. (Eds.) Transport Innovation: A New Era for Australia. CL Creations, Lane Cove, N.S.W., 12.1-12.9.

Ferreira, Luis (2005) Transport Research. In Saeg, P. & Charles, P. (Eds.) Transport Innovation in Australia. Creative Publishers, 3.1-3.13.

Ferreira, Luis, Kozan, Erhan, & Lake, Maree (2002) Heuristic Techniques for Scheduling Railway Track Maintenance. In Kozan, E & Ohuchi, A (Eds.) Operations Research/Management Science at Work. Kluwer Academic Publishers, Boston, USA, pp. 177-187.

Ferreira, Luis, Smith, Nariida, & Mead, Elspeth J. (2001) Assessing the transport impacts of e-business in Australia. In Sucharov, L. & Brebbia, C.A. (Eds.) Urban Transport and the Environment VII. Wessex Institute of Technology Press, Southampton, U.K., pp. 233-244.

903

Fischer, Lynda (2005) How do designers think? In D : -for design : -for derelique. Queensland University of Technology, pp. 95-98.

Fischer, Martin & Drogemuller, Robin (2009) Virtual design and construction. In Newton, Peter, Hampson, Keith, & Drogemuller, Robin (Eds.) Technology, Design and Process Innovation in the Built Environment. Taylor & Francis, Oxon, Abingdon, pp. 293-318.

Fookes, Clinton, Maeder, Anthony, Sridharan, Sridha, & Mamic, George (2010) Gaze Based Personal Identification. In Behavioral Biometrics for Human Identification: Intelligent Applications. IGI Global.

Foth, Marcus & Sanders, Paul S. (2008) Impacts of Social Computing on the Architecture of Urban Spaces. In Aurigi, Alessandro & De Cindio, Fiorella (Eds.) Augmented Urban Spaces: Articulating the Physical and Electronic City. Ashgate, Aldershot, UK, pp. 73-91.

444

Franz, Jill M. (2010) Arts-based research. In Higgs, Joy, Cherry, Nita, Macklin, Rob, & Ajjawi, Rola (Eds.) Researching Practice : A Discourse on Qualitative Methodologies. Sense Publishers, Rotterdam, 217 -226.

Franz, Jill M. (2005) Our Challenge as Design Educators. In D Publication. Queensland Universtity of Technology, Brisbane, Qld., pp. 45-46.

Franz, Jill M. (2005) The future of design: An academic perspective for the School of Design. In Abbott, Sarak, Hortz, Allison, Scullin, Suzy, Smith, Dianne J., & Kurucz, Rohit (Eds.) D : -for design : -for derelique. Queensland University of Technology, Australia, Queensland, Brisbane, pp. 86-90.

202

Frazer, John (2003) John Frazer. In Hardingham, Samantha (Ed.) Cedric Price : Opera. Wiley-Academic, Chichester, pp. 46-48.

Frazer, John H & Fischer, Thomas (2005) Modeling Architecture as Logic States in Space and Time: History and Future of the Universal Constructor. In Chiu, Mao-Lin (Ed.) CAAD Talks 5 - Insights of Smart Environments. Archidata Co., Ltd., Taiwan, pp. 87-104.

Frazer, John H. (2007) Archigram. In Wintle, Justin (Ed.) New Makers of Modern Culture. Routledge, London, pp. 40-41.

Frazer, John H. (2009) Connected digital cities. In Baratloo, Mojdeh & Holt-Damant, Kathi (Eds.) Emerging Urban Futures in Land Water Infrastructure, New Model Cities 01 South East Queensland. Columbia University, United States of America, pp. 132-133.

Frazer, John H. (2001) Creative Design & the Generative Evolutionary Paradigm. In Bentley, Peter J. & Corne, David W. (Eds.) Creative Evolutionary Systems. Academic Press, USA, pp. 253-274.

Frazer, John H. (2002) Creative design and the generative evolutionary paradigm. In Corne, David & Bentley, Peter (Eds.) Creative evolutionary systems. Morgan Kaufmann Publishers Inc. (Elsevier), United States of America, California, San Francisco, pp. 253-274.

Frazer, John H. (2003) Design thinking. In Lo, A. (Ed.) Navigating Design. Hong Kong Polytechnic University with Hong Kong Arts Development Council, Hong Kong, pp. 50-59.

Frazer, John H. (2003) Enjoying uncertainty. In Lo, A. (Ed.) Navigating Design. Hong Kong Polytechnic University with Hong Kong Arts Development Council, Hong Kong, pp. 118-123.

Frazer, John H. (2007) Fuller, Richard Buckminster. In Wintle, Justin (Ed.) New Makers of Modern Culture. Routledge, London, pp. 540-542.

Frazer, John H. (2007) Gehry, Frank Owen (Ephraim Goldberg). In Wintle, Justin (Ed.) New Makers of Modern Culture. Routledge, London, pp. 575-577.

Frazer, John H. (2008) Interactive architecture. In Brown, Paul, Gere, Charlie, Lambert, Nicholas, & Mason, Catherine (Eds.) White Heat Cold Logic British Computer Art 1960-1980. The MIT Press, Massachusetts ; Cambridge, pp. 37-51.

Frazer, John H. (2002) A Natural Model for Architecture : The Nature of the Evolutionary Body, 1995. In Spiller, Neil (Ed.) Cyber_Reader : Critical writings for the digital era. Phaidon, London, pp. 246-255.

Frazer, John H. (2002) A Natural Model for Architecture: the Nature of the Evolutionary Model. In Spiller, Neil (Ed.) Cyber_Reader: Critical Writings for the Digital Era. Phaidon Press Limited, London, pp. 246-255.

Frazer, John H. (2007) Price, Cedric John. In Wintle, Justin (Ed.) New Makers of Modern Culture. Routledge, London, pp. 1211-1214.

Frazer, John H. (2007) Yeang, Ken. In Wintle, Justin (Ed.) New Makers of Modern Culture. Routledge, London, pp. 1655-1656.

Frazer, John H. (2003) The continuing relevance of GENERATOR: the archetypal generator. In Hardingham, Samantha (Ed.) Cedric Price: Opera. Wiley, United Kingdom, pp. 46-48.

Frazer, John H. (2006) The generation of virtual prototypes for performance optimization. In Oosterhuis, Kas & Feireiss, Lukas (Eds.) The architecture co-laboratory : Game Set and Match II : on computer games, advanced geometries, and digital technologies. Episode Publishers, Netherlands, Rotterdam, pp. 208-212.

Frazer, John H. (2002) A natural model for architecture : the nature of the evolutionary model 1995. In Spiller, Neil (Ed.) Cyber reader : critical writings for the digital era. Phaidon Press Limited, United Kingdom, London, pp. 246-255.

Frazer, John H. (2011) A natural model for architecture. In Menges, Achim & Ahlquist, Sean (Eds.) Computational Design Thinking : Computation Design Thinking. John Wiley & Sons Ltd, Chichester.

Fung, Y. F., Ercan, M. F., Ho, T. K., & Cheung, W. L. (2001) A parallel computation of power system equations. In Euro-Par 2001 Parallel Processing. Springerlink, pp. 371-374.

Fung, Y. F., Ercan, M. Fikret, Ho, T. K., & Cheung, W. L. (2001) SSE based parallel solution for power systems network equations. In Computational Science — ICCS 2001. Springerlink, pp. 862-872.

Gadomski, A, Kruszewska, N, Nicolini, C, Oloyede, Adekunle, Pawlak, Zenon, Pechkova, E, et al. (2008) Can modern statistical mechanics unravel some practical problems encountered in model biomatter aggregations emerging in internal- and external-friction conditions? In Kim, B (Ed.) Statistical Mechancis Research. Nova Science Publishers, United States of America, New York, Hauppauge, pp. 1-47.

Gerrard, Alex, Zuo, Jian, Zillante, George, & Skitmore, Martin (2010) Building information modeling in the Australian architecture engineering and construction industry. In Underwood, Jason & Isikdag, Umit (Eds.) Handbook of Research on Building Information Modeling and Construction Informatics: Concepts and Technologies. IGI Global, pp. 521-544.

Giulianini, Michele & Motta, Nunzio (2012) Polymer self assembly on carbon nanotubes. In Bellucci, Stefano (Ed.) Self-Assembly of Nanostructures, The INFN Lectures, Vol. III. Springer, New York Dordrecht Heidelberg, pp. 1-77.

Gomez, Rafael Ernesto, Popovic, Vesna, & Bucolo, Sam (2008) Emotional driving experiences. In Desmet, Pieter, van Erp, Jeroen, & Karlsson, MariAnne (Eds.) Design and Emotion Moves. Cambridge Scholars Publishing, Newcastle upon Tyne, pp. 141-164.

308

Gonzalez, Luis F., Periaux, Jacques, Srinivas, K., & Whitney, Eric J. (2004) Evolutionary optimization tools for multi objective design in aerospace engineering: from theory to MDO applications. In Annicchiarico, William, Periaux, Jacques, Cerrolaza, Miguel, & Winter, Gabriel (Eds.) Evolutionary Algorithms And Intelligent Tools In Engineering Optimization. WIT Press (UK), UK.

Gray, Matthew & Gill, Roderic A. (2009) Tackling ‘Wicked’ problems holistically with institutionalist policymaking. In Natarajan, Tara, Elsner, Wolfram, & Fullwiller, Scott (Eds.) Institutional Analysis and Praxis : the Social Fabric Matrix Approach. Springer, New York, pp. 87-102.

Guan, Li-Shan & Chen, Guangnan (2010) Solar energy : utilization in building operations. In Capehart, Barney L. (Ed.) Encyclopedia of Energy Engineering and Technology. Taylor & Francis, London, pp. 1-7.

Gudes, Ori, Kendall, Elizabeth, Yigitcanlar, Tan, Hoon Han, Jung, & Pathak, Virendra (2012) Developing a competitive city through healthy decision-making. In Melih , Bulu (Ed.) City Competitiveness and Improving Urban Subsystems : Technologies and Applications. IGI Global, U.S.A., pp. 107-121.

Hampson, Keith D., Brown, Kerry, Pillay, Janet, & Brandon, Peter S. (2008) Key Lessons and Conclusions. In Brown, Kerry, Hampson, Keith D., Brandon, Peter S., & Pillay, Janet (Eds.) Clients Driving Construction Innovation: Benefiting from Innovation. CRC for Construction Innovation, Brisbane, pp. 249-251.

Hampson, Keith D. & Brown, Kerry A. (2005) Mapping the terrain. In Brown, Kerry A., Hampson, Keith D., & Brandon, Peter (Eds.) Clients driving construction innovation : mapping the terrain. CRC for Construction Innovation (Icon Net Pty Ltd), Australia, Queensland, Brisbane, pp. 1-6.

Hampson, Keith D. & Manley, Karen (2001) Construction innovation and public policy in Australia. In Manseau, Andre & Seaden, George (Eds.) Innovation in Construction : An International Review of Public Policies. Spon Press (Taylor & Francis), London, pp. 31-57.

Hannah, Bruce, Kubik, Kurt, & Walker, Rodney (2003) Propagation Modelling of GPS Signals. In Grafarend, Erik, Krumm, Friedrich, & Schwarze, Volker (Eds.) Geodesy - The Challenge of the 3rd Millenium. Springer, Berlin, Germany, pp. 69-78.

Hardie, Mary P. & Manley, Karen (2008) Exemplars of successful innovation delivery by small and medium construction enterprises. In Brown, Kerry A., Hampson, Keith D., Brandon, Peter S., & Pillay, Janet (Eds.) Clients driving construction innovation : benefiting from innovation. CRC for Construction Innovation, Brisbane.

205

Hedley, Peter W. & McAuliffe, Marisha B. (2005) The social responsibility of designers. In D : -for design : -for derelique. QUT Publications, Australia, Queensland, Brisbane, pp. 10-14.

Heywood, Philip R. (2010) Community voices, votes and action. In Gleeson, B. & Steele, W. (Eds.) A Climate for Growth : Planning South-East Queensland. UQP, Brisbane, Queensland.

Heywood, Philip R. (2010) Planning infrastructure : considerations for regional development. In Yigitcanlar, Tan (Ed.) Sustainable Urban and Regional Infrastructure Development : Technologies, Applications and Management. IGI Global, Hershey, PA.

Heywood, Philip R. (2008) The place of knowledge-based development in the metropolitan region. In Yigitcanlar, T, Velibeyoglu, K, & Baum, S (Eds.) Creative Urban Regions: Harnessing Urban Technologies to Support Knowledge City Initiatives. Information Science Reference (IGI Global), United States of America, pp. 1-23.

Heywood, Philip R. & Lacey, Justine (2010) The ethics of regional water planning : planning and management of water resources in a growth region. In Yigitcanlar , Tan (Ed.) Sustainable Urban and Regional Infrastructure Development: Technologies, Applications and Management edited by Dr. Tan Yigitcanlar. IGI Global, , USA, pp. 183-200.

Higgins, Andrew, Ferreira, Luis, & Lake, Maree (1999) Scheduling Rail Track Maintenance to Minimise Overall Delays. In Ceder, Avishai (Ed.) Transportation and Traffic Theory. Elsevier, Amsterdam ; Oxford :, pp. 779-796.

Himawan, Ivan, Mccowan, Iain, & Lincoln, Mike (2008) Microphone array beamforming approach to blind speech separation. In Popescu-Belis, Andrei, Renals, Steve, & Bourlard, Hervé (Eds.) Machine Learning for Multimodal Interaction. Springer Berlin, pp. 295-308.

Ho Lee, Sang, Hoon Han, Jung, Taik Leem, Yoon, & Yigitcanlar, Tan (2008) Towards ubiquitous city : concept, planning, and experiences in the Republic of Korea. In Yigitcanlar, Tan, Velibeyoglu, Koray, & Baum, Scott (Eds.) Knowledge-Based Urban Development : Planning and Applications in the Information Era. IGI Global, Information Science Reference, Hershey, Pa., pp. 148-169.

1,019

Holt-Damant, Kathi (2001) Bits in pieces : the half life of data. In Nogrady, Rebecca (Ed.) Metis 2001 : Wasted : Exhibitions of Science and Art, National Science Week. CSIRO National Awareness, Dickson, A.C.T, pp. 50-55.

Holt-Damant, Kathi (2005) Celebration : architectonic constructs of space in the 1920s. In Leach, Andrew & Matthewson, Gill (Eds.) The 22th Annual Conference of the Society of Architectural Historians Australia and New Zealand. Society of Architectural Historians Australia and New Zealand, Napier, pp. 173-178.

640

Holt-Damant, Kathi (2001) Coexisting realities : spatial practices. In Cooper, Jackie (Ed.) The Architecture of Navigation. RMIT Publishing, Melbourne ; Sydney, pp. 42-48.

Holt-Damant, Kathi (2003) Emerging futures : Brisbane’s railway explored studio based design and technology. In Newton, Claire (Ed.) AASA Design Research and Practice in Architectural Education. University of Melbourne, Melbourne and Sydney.

Holt-Damant, Kathi (2005) Emerging futures : rethinking the railway station for transit-oriented development. In Renne, John (Ed.) Transit Oriented Development : Making It Happen. Patrec, Curtin Unviersity/Murdoch/UWA/ECU, Fremantle, Western Australia, pp. 1-9.

Holt-Damant, Kathi (2009) Emerging urban futures : land, water, infrastructure. In Baratloo, Mojdeh & Holt-Damant, Kathi (Eds.) Emerging Urban Futures in Land Water Infrastructure, New Model Cities 01 South East Queensland. Columbia University Press, New York, pp. 8-13.

402

Holt-Damant, Kathi (1998) Space and time in the architecture and theory of Bernard Tschumi. In Cooper, Jackie & Beck, Haig (Eds.) UME Magazine. University of Melbourne, Melbourne and Sydney, pp. 48-51.

417

Holt-Damant, Kathi (2008) The threat from within : protecting the indefensible from the indeterminate. In Sorkin, Michael (Ed.) Indefensible Space : the Architecture of the Insecurity State. Routledge/Taylor and Francis, New York, pp. 163-175.

Holt-Damant, Kathi & Wyeld, Theodor G. (2005) Constructs of space : new ways of seeing co-mediated urban environments. In Holt-Damant, Kathi & Sanders, Paul (Eds.) Proceeding of the AASA Conference : Drawing Together : Convergent Practises in Architectural Education. University of Queensland, Brisbane.

461

Hutchinson, Jim & Demirbilek, Nur (2005) The role of architectural science in interior design. In Abbot, S., Hortz, A., Scullin, S., Smith, D., & Kurucz, R. (Eds.) D : -for design : -for derelique. Queensland University of Technology, Australia, Queensland, Brisbane, pp. 52-55.

128

Hutmacher, Dietmar, Reichert, Johannes, Olkowska-Truchanowicz, Joanna, Leong, David, & Lim, Thiam Chye (2009) Characterisation and culturing of adipose-derived precursor cells. In Lakshmipathy, U, Chestnut, J, & Thyagarajan, B (Eds.) Emerging Technology Platforms for Stem Cells. Wiley, John & Sons, Incorporated, United States of America, New Jersey, Hoboken, pp. 439-462.

Hutmacher, Dietmar W. & Woodruff, Maria A. (2007) Composite scaffolds for bone engineering. In Fakirov, S & Bhattacharyya, D (Eds.) Handbook of engineering biopolymers : homopolymers, blends and composites. Hanser Gardner, Germany, Munich, pp. 773-798.

Jayalath, Dhammika & Tellambura, Chintha (2002) Interleaved PC-OFDM to reduce peak-to-average power ratio. In Wysocki, Tadeusz A., Darnell, Michael, & Honary, Bahram (Eds.) Advanced Signal Processing for Communication Systems. Kluwer Academic Publishers (Springer), Boston, pp. 237-250.

Jayalath, Dhammika & Tellambura, Chintha (2002) Peak-to-average power ratio of IEEE 802.11a PHY layer signals. In Wysocki, Tadeusz A., Darnell, Michael, & Honary, Bahram (Eds.) Advanced Signal Processing for Communication Systems. Kluwer Academic Publishers (Springer), Boston, pp. 83-96.

Jerome, Kristine P. (2010) The role of the built environment in the creation, cultivation and acquisition of a knowledge-base. In Metzxiotis, Kostas, Carrillo, Francisco Javier, & Yigitcanlar, Tan (Eds.) Knowledge-Based Development for Cities and Societies : An Integrated Multi-level Approach. IGI Global, Hershey Pa, pp. 211-221.

Kaphle, Manindra R., Tan, Andy, Thambiratnam, David, & Chan, Tommy H.T. (2010) Structural health monitoring of bridges : source localisation in acoustic emission technique. In Yigitcanlar, Tan (Ed.) Rethinking Sustainable Development : Urban Management, Engineering, and Design. IGI Global/Engineering Science Reference, Hershey, Pa, pp. 244-253.

Kaphle, Manindra R., Tan, Andy, Thambiratnam, David, & Chan, Tommy H.T. (2011) Use of acoustic emission technique for structural health monitoring of bridges. In Chan, Tommy H.T. & Thambiratnam, David (Eds.) Structural Health Monitoring in Australia. Nova Science Publishing, United States of America, pp. 55-80. (In Press)

Keast, Robyn L., Baker, Douglas C., & Brown, Kerry (2010) Sustainable airport infrastructure : balancing infrastructures for the airport metropolis. In Yigitcanlar, Tan (Ed.) Sustainable, Urban and Regional Infrastructure Development : Technologies, Applications and Management. Information Science Reference, Hershey, Pa, pp. 91-101.

Kee, Damien & Wyeth, Gordon (2005) Cerebellar augmented joint control for a humanoid robot. In Nardi, Daniele, Riedmiller, Martin, Claude, Sammut, & Santos-Victor, José (Eds.) RoboCup 2004 : Robot Soccer World Cup VIII. Springer Berlin / Heidelberg, pp. 347-357.

Kennedy, Rosemary (2008) A prototype for subtropical urbanism. In Wallace, M & Stutchbury, S (Eds.) Place makers contemporary Queensland architects. Queensland Art Gallery, Australia, Queensland, South Brisbane, pp. 41-45.

Kennedy, Rosemary J. & Katoshevski, Rachel (2009) Tools for a sustainable built environment : guidelines for subtropical design. In Tsenkova, Sasha (Ed.) Planning Sustainable Communities : Diversity of Approaches and Implementation Challenges. University of Calgary, Calgary, pp. 179-196.

Kim, Eric, Tan, Andy, & Yang, Bo-Suk (2008) A hybrid evolutionary algorithm and its application to parameter identification of rolling elements bearings. In Kosinski, W (Ed.) Advances in Evolutionary Algorithms. IN-TECH, Austria, Vienna, pp. 143-166.

Knothe Tate, Melissa, Falls, Thomas, Mishra, Sanjay K., & Atit, Radhika (2010) Engineering an Ecosystem : Taking Cues from Nature’s Paradigm to Build Tissue in the Lab and the Body. In Sivaloganathan, Siv (Ed.) New Perspectives in Mathematical Biology. American Mathematical Society, Toronto, Canada, pp. 113-134.

Kraal, Ben J. (2009) Contrasting scenarios : embracing speech recognition. In Maurtua, Inaki (Ed.) Human-Computer Interaction. INTECH, Austria, pp. 497-516.

Lake, Maree & Ferreira, Luis (2002) Minimising the conflict between rail operations and infrastructure maintenance. In Taylor, M.A. (Ed.) Transportation and Traffic Theory in the 21st Century: Proceedings of the 15th International Symposium on Transportation and Traffic Theory. Elsevier, Amsterdam ; London :, pp. 63-80.

Lake, Maree, Ferreira, Luis, & Stewart, David (2002) The effect of multi-combination freight vehicles in urban traffic. In Sucharov, L. & Brebbia, C. A. (Eds.) Urban Transport and the Environment VIII. Wessex Institute of Technology, pp. 233-244.

735

Lawson, Gill M. (2011) Networks cities and ecological habitats. In Networks Cities. China Architecture & Building Press, Beijing.

Leavy, Brett A., Wyeld, Theodor G., Hills, James, Barker, Christopher I., & Gard, Stephan (2008) Digital songlines : digitising the arts, culture and heritage landscape of aboriginal Australia. In Kalay, Yehuda, Kvan, Thomas, & Affleck, Janice (Eds.) New Heritage New Media and Cultural Heritage. Routledge, United Kingdom, Oxon, Abingdon, pp. 294-303.

Ledwich, Gerard, Palmer, Edward, & Ghosh, Arindam (2009) Detection and Estimation of Nonstationary Power Transients. In Messina, Arturo Roman (Ed.) Inter-area Oscillations in Power Systems : A Nonlinear and Nonstationary Perspective. Springer, United States, pp. 189-230.

Lee, Dong Seop, Srinivas, Karkenahalli, Gonzalez, Luis F., Periaux, Jacques, & Obayashi, Shigeru (2010) Robust multidisciplinary design optimisation using CFD and advanced evolutionary algorithms. In Hafez, M.M., Oshima, K., & Kwak, D. (Eds.) Computational Fluid Dynamics Review 2010. World Scientific Publishing Company, Incorporated , Singapore, pp. 469-491.

Lee, Dong-Seop, Gonzalez, Luis F., Periaux, Jacques, & Srinivas, Kavita (2009) Evolutionary optimisation methods with uncertainty for modern multidisciplinary design in aeronautical engineering. In 100 Volumes of Notes on Numerical Fluid Mechanics. Spinger , Berlin / Heidelberg, pp. 271-284.

Lee, Gini (2007) Curatorial thinking : performance space and the interior. In Gigli, John, Hay, Frazer, Hollis, Ed, Milligan, Andrew, Milton, Alex, & Plunkett, Drew (Eds.) Thinking inside the box : a reader in interior design for the 21st century. Middlesex University Press, United Kingdom, London, pp. 133-143.

163

Lee, Gini (2007) Three scenarios for a critical architecture of desert mobility. In Rendell, Jane, Hill, Jonathan, Fraser, Murray, & Dorrian, Mark (Eds.) Critical architecture. Routledge (Taylor and Francis Group), United Kingdom, Oxon, Abingdon, pp. 279-287.

Lee, Gini (2010) WaterFieldWork : a working lexicon for critical refugia in arid landscapes. In Parodi, Oliver, Lee, Gini, & Bava, Henri (Eds.) Towards Resilient Water Landscapes : Design Research Approaches from Europe and Australia. KIT Scientific Publishing, Germany.

Lee, Sang-Ho, Yigitcanlar, Tan, & Wong, Johnny (2010) Ubiquitous and smart system approaches to infrastructure planning : learnings from Korea, Japan and Hong Kong. In Yigitcanlar, Tan (Ed.) Sustainable urban and regional infrastructure development : technologies, applications and management. IGI Global, Information Science Reference, Hershey, Pennsylvania, pp. 165-182.

Lee, Shinyi & Yigitcanlar, Tan (2010) Sustainable urban stormwater management : water sensitive urban design perceptions, drivers and barriers. In Yigitcanlar, Tan (Ed.) Rethinking Sustainable Development : Urban Management, Engineering, and Design. IGI Global, Engineering Science Reference, Hershey Pa, pp. 26-37.

515

Lee, Shinyi, Yigitcanlar, Tan, Egodawatta, Prasanna K., & Goonetilleke, Ashantha (2010) Sustainable water provision : challenges, alternative strategies and sources in the era of climate change. In Yigitcanlar, Tan (Ed.) Sustainable Urban and Regional Infrastructure Development : Technologies, Applications and Management. IGI Global, Information Science Reference, Hershey, PA, pp. 17-30.

Lees, Michael, Campbell, Duncan A., & Keir, Andrew G. (2008) Machine vision for beer keg asset management. In Billingsley, John & Bradbeer, Robin (Eds.) Mechatronics and machine vision in practice. Springer Berlin / Heidelberg, Berlin, pp. 125-137.

Lim, Soonkam & Yang, Jay (2008) Developing frameworks and processes of enhancing sustainability deliverables in infrastructure projects. In Brown, K, Hampson, K, Brandon, P, & Pillay, J (Eds.) Clients Driving Construction Innovation 'Benefiting from Innovation'. Cooperative Research Centre for Construction Innovation, for Icon.Net Pty Ltd., Australia, Queensland, Brisbane, pp. 225-229.

Lin, Frank, Fookes, Clinton B., Chandran, Vinod, & Sridharan, Sridha (2007) Super-resolved faces for improved face recognition from surveillance video advances in biometrics. In Lee, Seong-Whan & Li, Stan (Eds.) Advances in Biometrics. Springer Berlin / Heidelberg, Berlin, pp. 1-10.

Ling, Robin S.M., Howell, Jonathan R., Bartlett, Gavin E., & Crawford, Ross W. (2010) Osteolysis, stem wear and loosening. In Ling, Robin S.M., Lee, A.J. Clive, Gie, Graham A., Timperley, A. John, Hubble, Matthew J.W., Howell, Jonathan R., et al. (Eds.) The Exeter Hip. Exeter Hip Publishing, Exeter, UK, pp. 39-56.

Little, J. Paige & Adam, Clayton J. (2012) Patient-Specific Modeling of Scoliosis. In Gefen, Amit (Ed.) Patient-Specific Modeling in Tomorrow's Medicine. Springer Verlag, Berlin. (In Press)

Liu, Yulin, Bunker, Jonathan M., & Ferreira, Luis (2010) Modelling urban public transit users’ route choice behaviour : a review and outlook. In Yigitcanlar, Tan (Ed.) Rethinking Sustainable Development : Urban Management, Engineering, and Design. IGI Global, Engineering Science Reference, Hershey, Pa, pp. 134-146.

Lovell, Brian & Madasu, Vamsi (2008) An automatic off-line signature verification and forgery detection system. In Verma, B & Blumenstein, M (Eds.) Pattern Recognition Technologies and Applications: Recent Advances. Information Science Reference, United States of America, Pennsylvania, Hershey, pp. 63-89.

Lowe, David & Skitmore, Martin (2006) Bidding. In Lowe, David & Leiringer , Roine (Eds.) Commercial management of projects : defining the discipline. Wiley-Blackwell, United States of America, Massachusetts, Malden, pp. 356-389.

Lucey, Patrick, Potamianos, Gerasimos, & Sridharan, Sridha (2008) Visual speech recognition across multiple views. In Liew, A & Wang, S (Eds.) Visual Speech Recognition. Lip Segmentation and Mapping. Information Science Reference (IGI Global), United States of America, Pennsylvania, Hershey, pp. 294-325.

Madasu, Hanmandlu, Madasu, Vamsi, Tiwari, Anuj, & Vasikarla, Shantaram (2006) A Novel Approach to Reduce Universal Noise in Gray Images Using Fuzzy Filters. In Intelligent Engineering Systems through Artificial Neural Networks - Volume 16. ASME Press, United States of America, New York, pp. 473-478.

Mahbub, Parvez, Ayoko, Godwin, Egodawatta, Prasanna, Yigitcanlar, Tan, & Goonetilleke, Ashantha (2010) Traffic and climate change impacts on water quality : measuring build-up and wash-off of heavy metals and petroleum hydrocarbons. In Yigitcanlar, Tan (Ed.) Rethinking sustainable development : urban management, engineering, and design. IGI Global, Engineering Science Reference, Hershey, Pennsylvania, pp. 147-167.

Manley, Karen, Hardie, Mary P., & Kajewski, Stephen L. (2009) Innovation drivers for the built environment. In Newton, Peter, Hampson, Keith D., & Drogemuller, Robin (Eds.) Technology, Design and Process Innovation in the Built Environment. Taylor & Francis, pp. 514-527.

Manley, Karen & Kajewski, Stephen L. (2011) Innovation in construction : a case study of the Australian context. In de Valence, Gerard (Ed.) Modern Construction Economics : Theory and Application. Spon Press (Taylor & Francis), Oxon, Abingdon, pp. 135-153.

Marceau, Jane & Manley, Karen (2001) Australia's system of innovation. In Dow, Geoff & Parker, Rachel L. (Eds.) Business, work and community : into the new millennium. Oxford University Press, Sth Melbourne, Australia, pp. 81-100.

168

Masrom, Md Asrul & Skitmore, Martin (2010) Sustainability performance of construction : conceptual models of satisfaction levels in construction projects. In Yigitcanlar, Tan (Ed.) Rethinking Sustainable Development : Urban Management, Engineering, and Design. IGI Global, Engineering Science Reference, Hershey, PA, pp. 286-295.

McLaren, Mitchell L., Vogt, Robert J., Baker, Brendan J., & Sridharan, Sridha (2009) Data-driven impostor selection for T-norm score normalisation and the background dataset in SVM-based speaker verification. In Massimo, Tistarelli & Nixon, Mark S. (Eds.) Advances in Biometrics : Third International Conferences, ICB 2009, Alghero, Italy, June 2-5, 2009, Proceedings. Springer , Berlin Heidelberg, pp. 474-483.

Mejias, Luis, Fitzgerald, Daniel L., Eng, Pillar C., & Xi, Liu (2009) Forced landing technologies for unmanned aerial vehicles : towards safer operations. In Thanh Mung, Lam (Ed.) Aerial Vehicles. In-Tech, Kirchengasse, Austria, pp. 415-442.

149

Melchels, Ferry, Malda, Jos, Fedorovich, Natalja, Alblas, Jacqueline, & Woodfield, Tim (2011) Organ printing. In Kirkpatrick, James, Hutmacher, Dietmar, Healy, Kevin, Grainger, David, & Ducheyne, Paul (Eds.) Comprehensive Biomaterials, Six-Volume Set. Elsevier Science. (In Press)

Miao, Xigeng & Gorring, Nicholas M. (2007) Nanoceramics and Nanoceramic Composites for Biomedical Applications. In Tseng, Tseung-Yuen & Nalwa, Hari Singh (Eds.) Handbook of Nanoceramics and Their Based Nanodevices. American Scientific Publishers. (In Press)

Milford, Michael & Wyeth, Gordon (2007) Spatial mapping and map exploitation : a bio-inspired engineering perspective. In Winter, Stephan, Duckham, Matt, Kulik, Lars, & Kuipers, Ben (Eds.) Spatial Information Theory. Springer Berlin / Heidelberg, pp. 203-221.

Miller, Wendy F. & Birkeland, Janis (2010) Green energy : sustainable energy sources and alternative technologies. In Yigitcanlar, Tan (Ed.) Sustainable Urban and Regional Infrastructure Development : Technologies, Applications and Management. Information Science Reference (IGI Global), Hershey PA USA, pp. 1-16.

Miller, Wendy F., Kennedy, Rosemary J., & Loh, Susan (2012) Benefits and Impacts of Adjusting Cooling Set Points in Brisbane: How Do Office Workers Respond? In Hyde, Richard, Groenhout, Nathan, Barram, Francis, & Yeang, Ken (Eds.) Sustainable Retrofitting of Commercial Buildings: Warm Climates. Routledge (Taylor & Francis Group), Oxon, United Kingdom, pp. 407-416.

Mills, Steven, Ford, Jason J., & Mejias, Luis (2011) Vision based control for fixed wing UAVs inspecting locally linear infrastructure using skid-to-turn maneuvers. In Valavanis, K. (Ed.) Unmanned Aerial Vehicles. Springer, The Netherlands, pp. 29-42.

107

Moragaspitiya, Praveen, Thambiratnam, David P., Perera, Nimal, & Chan, Tommy H.T. (2010) Infrastructure sustainability : differential axial shortening of concrete structures. In Yigitcanlar, Tan (Ed.) Rethinking Sustainable Development : Urban Management, Engineering, and Design. IGI Global, Hershey, PA.

Moyano, Carlos F. & Castronuovo, Edgardo Daniel (2008) Non-linear mathematical programming applied to electric power systems stability. In Castronuovo, Edgardo Daniel (Ed.) Optimization Advances in Electric Power Systems. Nova Science Publishers, Inc, New York, USA, pp. 255-282.

Moyano, Carlos F. & Ledwich, Gerard (2011) Load modelling : induction motors. In Robinson, Olivia (Ed.) Electric Power Systems in Transition. Nova Science Publishers, Inc., Hauppauge, N.Y., pp. 75-136.

Muley, Deepti S., Bunker, Jonathan M., & Ferreira, Luis (2010) User characteristics of transit oriented developments : the case of Kelvin Grove Urban Village. In Yigitcanlar, Tan (Ed.) Rethinking Sustainable Development : Urban Management, Engineering, and Design. IGI Global, Engineering Science Reference, United States of America, pp. 119-133.

Murray, Martin H. (2001) Students: managing to learn; teachers: learning to manage. In Miller, Judith, Groccia, James, & Miller, Marilyn (Eds.) Student-assisted teaching - a guide to faculty-student teamwork. Anker Publishing Company, Bolton, Mass., pp. 50-55.

Nami, Alireza & Zare, Firuz (2010) Multilevel converters in renewable energy systems. In Hammons, T. J. (Ed.) Renewable Energy. In-teh, Croatia, pp. 271-296.

Newton, PW, Hampson, Keith D., & Drogemuller, Robin (2009) Transforming the Built Environment through Construction Innovation. In Newton, PW, Hampson, Keith D., & Drogemuller, Robin (Eds.) Technology, Design and Process Innovation in the Built Environment. Taylor and Francis, Abingdon.

Newton, Peter, Hampson, Keith D., & Drogemuller, Robin (2009) Transforming the built environment through construction. In Newton, Peter, Hampson, Keith D., & Drogemuller, Robin (Eds.) Technology, Design and Process Innovation in the Built Environment. Taylor & Francis, Oxon, Abingdon, pp. 3-27.

O'Hare, Daniel J. (2006) Mobilising myths in paradise: the planning and development of Noosa as 'not another Gold Coast'. In Childs, Iraphne R. & Hudson, Brian J. (Eds.) Queensland : geographical perspectives. Royal Geographical Society of Queensland, Australia, Queensland, Brisbane, pp. 91-109.

O'Hare, Daniel J. (2001) South Brisbane Case Study. In Sim, Jeannie C. & Armstrong, Helen B. (Eds.) Reports of the Case Studies:. Cultural Landscape Research Unit, Queensland University of Technology, Brisbane, QLD., pp. 101-133.

Omar, Mohd Faizal, Trigunarsyah, Bambang, & Wong, Johnny (2010) Sustainable infrastructure project planning : progress in contemporary decision support tools. In Yigitcanlar, Tan (Ed.) Rethinking sustainable development : urban management, engineering, and design. IGI Global, Hershey. Pa., pp. 255-270.

Pamulu, Muhammad Sapri, Kajewski, Stephen L., & Betts, Martin (2007) Manajemen teknologi informasi dalam industri konstruksi Indonesia (Management of information technology in Indonesian construction firms). In Abduh, Muhammad, Marzuki, Puti Farida, Fatima, Ima, Pradoto, Rani G. K., Pribadi, Krishna S., Soemardi, Biemo W., et al. (Eds.) Konstruksi: Industri, Pengelolaan, dan Rekayasa. ITB Press, Bandung, Indonesia, pp. 73-84.

250

Paten, Cheryl, Birkeland, Janis, & Pears, Alan (2005) Greening the built environment. In Hargroves, Karlson & Smith, Michael H. (Eds.) The natural advantage of nations : business opportunities, innovation, and governance in the 21st century. Earthscan, United Kingdom, London, pp. 346-370.

Pathak, Virendra & Shukla, S. P. (2009) Urban growth monitoring techniques for sustainable development. In Recent trends in management, technology and environment. Macmillan Publishers India Limited, pp. 108-115.

161

Pathak, Virendra & Webb, Robert M. (2010) The big brother : monitoring urban growth and change for sustainable infrastructure provision. In Tan , Yigitcanlar (Ed.) Sustainable Urban and Regional Infrastructure : Technology, Planning and Management. Information Science Reference (IGI Global), Hersey, Pa, pp. 246-258.

Peach, Deborah (2005) Cost efficiency v quality service : using CHAT as a tool for understanding change and transformation in work practices. In Whymark, G. & Hasan, H. (Eds.) Activity as the Focus of Information Systems Research. Knowledge Creation Press, Eveleigh, NSW, pp. 195-218.

Peach, Deborah & Gamble, Natalie (2011) Scoping work integrated learning purposes, practices and issues. In Billett, Stephen & Henderson, Amanda (Eds.) Developing Learning Professionals : Integrating Experiences in University and Practice Settings. Springer, Dordrecht, The Netherlands.

Peach, Deborah, Willis, Jenny, Sahama, Tony R., & Hargraves, Megan (2010) Assessing performance capability in the work place. In Learning to be Professional through a Higher Education e-book. SCEPTrE, Surrey, England, pp. 1-15.

Persichetti, Luca, Capasso, Andrea, Sgarlata, Anna, Fanfoni, Massimo, Motta, Nunzio, & Balzarotti, Adalberto (2012) Towards a controlled growth of self-assembled nanostructures: shaping, ordering and localization in Ge/Si heteroepitaxy. In Bellucci, Stefano (Ed.) Self-Assembly of Nanostructures. Springer, New York, pp. 201-263.

Pillay, Hitendra K., Wilss, Lynn A., & Boulton-Lewis, Gillian M. (2006) Work and learning, implications for lifelong learning in the workplace. In Sutherland, Peter & Crowther, Jim (Eds.) Lifelong learning : concepts and contexts. Routledge, London & New York, pp. 218-229.

Popovic, Vesna (2002) Activity and designing pleasurable interaction with everyday artifacts. In Green, William & Jordan, Patrick (Eds.) Pleasure with products : beyond usability. Taylor and Francis (CRC Press), United Kingdom, London, pp. 367-376.

Popovic, Vesna (1999) Product Evaluation Methods and their Importance in Designing Interactive Artifacts. In Jordan, Patrick & Green, William (Eds.) Human Factors in Product Design : Current Practice and Trends. Taylor and Francis, pp. 367-376.

Prasadam, Indira, Chakravorty, Nishant, Crawford, Ross W., & Xiao, Yin (2012) Mesenchymal stem cells in osteoarthritis therapy : current status of theory, technology, and applications. In Xiao, Yin (Ed.) Mesenchymal Stem Cells. NOVA Science Publishers, Inc, New York, 163-176 .

Rashid, Kushairi, Yigitcanlar, Tan, & Bunker, Jonathan M. (2010) Sustainable transportation development : a framework to determine transportation disadvantaged. In Yigitcanlar, Tan (Ed.) Rethinking Sustainable Development : Urban Management, Engineering, and Design. IGI Global, Engineering Science Reference, Hershey, PA, pp. 104-118.

Raxworthy, Julian R. (2010) Dryness : the aesthetic condition of landscape design in Australia. In Parodi , Oliver (Ed.) Towards Resilient Water Landscapes : Design Research Approaches from Europe and Australia. KIT Scientific Publishing, Karlsruhe, pp. 37-48.

Raxworthy, Julian R. (2005) Room 4.1.3 and Australian landscape architecture. In Weller, Richard & Barnett, Rod (Eds.) Room 4.1.3 : innovations in landscape architecture. University of Pennsylvania Press, United States of America, Pennsylvania, Philadelphia, pp. 172-178.

Raxworthy, Julian R. (2002) Topos, topology or topography. In Connolly, Peter & van der Velde, Rene (Eds.) Technique : landscape architecture graduate design research at RMIT University 1995-2002. RMIT University Press, Australia, Victoria, Melbourne, pp. 36-70.

Raxworthy, Julian R. (2006) Transgressing edges and doing timeevolving new urban contexts. In Ludevid, Jordi & Sàrdà, Jordi (Eds.) Landscape : Product/Production. Association of Architects of Catalonia (COAC), Catalonia, pp. 282-293.

Raxworthy, Julian R. (2007) The response to dryness in Australia. In Bukman, Bert (Ed.) 'scape. Stichting Lijn in Landschap, The Netherlands, pp. 37-45.

Reichert, Johannes C., Berner, Arne, Saifzadeh, Siamak, & Hutmacher, Dietmar W. (2011) Preclinical animal models for segmental bone defect research and tissue engineering. In Steinhoff, Gustav (Ed.) Regenerative Medicine. Springer Netherlands, pp. 845-881.

Reichert, Johannes C. & Hutmacher, Dietmar W. (2011) Bone tissue engineering. In Pallua, Norbert & Suscheck, Christoph V. (Eds.) Tissue Engineering : From Lab to Clinic. Springer Berlin Heidelberg, pp. 431-456.

Rigby, Michael, Whitehouse, Sarah L., & Timperley, A. John (2010) Clinical results : Acetabular impaction grafting. In Ling, Robin S.M., Lee, A.J. Clive, Gie, Graham A., Timperley, A. John, Hubble, Matthew J.W., Howell, Jonathan R., et al. (Eds.) The Exeter Hip. Exeter Hip Publishing, Exeter, pp. 345-357.

Rose, Timothy M. (2005) A research framework to investigate the performance of financial incentives in construction projects. In Brown, Kerry A., Hampson, Keith D., & Brandon, Peter S. (Eds.) Clients Driving Construction Innovation : Mapping the Terrain. Icon.Net Pty Ltd, Brisbane, Queensland, Australia, pp. 169-181.

Rowlinson, Steve & Cheung, Yan Ki Fiona (2008) Alliancing in Australia - a long term JV? In Brown, Kerry, Hampson, Keith D., Brandon, Peter S., & Pillay, Janet (Eds.) Clients driving construction innovation: benefiting from innovation. Icon.Net Pty Ltd, Brisbane, Australia.

Rowlinson, Steve, Walker, Derek H.T., & Cheung, Yan Ki Fiona (2008) Culture and its impact upon project procurement. In Walker, D.H.T. & Rowlinson, Steve (Eds.) Procurement system : a cross industry project management perspective. Taylor & Francis, London, UK, pp. 277-310.

Runeson, Goran & Skitmore, Martin (2008) Scientific theories. In Knight, Andrew & Ruddock, Les (Eds.) Advanced Research Methods in the Built Environment. Blackwell Publishing Ltd, Oxford, England, pp. 76-85.

Saha, Suvash C. (2012) Natural convection in the attic-shaped spaces. In Acosta, Morena J. (Ed.) Advances in Energy Research. Nova Science Publishers, Inc., New York, 289-309 .

Saha, Suvash C. (2011) Periodically forced natural convection through the roof of an attic-shaped building. In Ahsan, Amimul (Ed.) Convection and Conduction Heat Transfer. INTECH Open Access Publisher, Croatia, pp. 33-54.

Schevers, Hans, Veldman, Dajon, Boulaire, Fanny, & Drogemuller, Robin (2006) Ontology-Based Demand Support Systems for Urban Development. In Brown, Kerry, Hampson, Keith, & Brandon, Peter (Eds.) Clients driving innovation : moving ideas into practice. CRC Construction Innovation, Brisbane, pp. 149-155.

294

Scott, Andrew (2005) The black art of ergonomics. In D : -for design : -for derelique. Queensland University of Technology, Australia, Queensland, Brisbane, pp. 91-94.

793

Senadeera, Wijitha, Bhandari, Bhesh R., Young, Gordon, & Wijesinghe, Bandu (2000) Physical property changes of fruits and vegetables during hot air drying. In Mujumdar, Arun S. (Ed.) Drying technology in agriculture and food sciences. Science Publishers, USA, pp. 149-166.

Seto, Janice (2001) An Overview of a Process Developed for Investigating Queensland's Cultural Landscapes. In Cotter, M, Boyd, B, & Gardiner, J (Eds.) Heritage Landscapes: Understanding Place And Communities. Southern Cross University Press, Lismore, NSW, pp. 91-104.

Setunge, Sujeeva & Kumar, Arun (2010) Knowledge infrastructure : managing the assets of creative urban regions. In Yigitcanlar, Tan (Ed.) Sustainable urban and regional infrastructure development : technologies, applications and management. IGI Global, Information Science Reference, Hershey, Pa., pp. 102-116.

Shibata, Kuniko & Sanders, Paul S. (2010) Contesting ‘sustainability’ in infrastructure planning : The debate of the public interest in Brisbane’s Boggo Road Busway development. In Yigitcanlar, Tan (Ed.) Sustainable Urban and Regional Infrastructure : Technology, Planning and Management. Information Science Reference (IGI Global), Hersey, PA, pp. 213-230.

Shih, Hoi Wai, Thambiratnam, David, & Chan, Tommy H.T. (2010) Infrastructure sustainability : damage assessment in multiple-girder composite bridges using vibration characteristics. In Tan, Yigitcanlar (Ed.) Rethinking Sustainable Development: Urban Management, Engineering, and Design. IGI Global, Hershey, PA. (In Press)

Shih, Hoi Wai, Thambiratnam, David Pathmaseelan, & Chan, Tommy Hung Tin (2011) Damage localisation in beams and plates using vibration characteristics. In Chan, Tommy Hung Tin & Thambiratnam, David Pathmaseelan (Eds.) Structural Health Monitoring in Australia. Nova Publishers, United States of America, pp. 33-53. (In Press)

Sim, Jean C. (2006) Climate and garden design in Queensland. In Childs, Iraphne R. & Hudson, Brian J. (Eds.) Queensland : geographical perspectives. Royal Geographical Society of Queensland, Australia, Queensland, Brisbane, pp. 189-215.

334

Sirikijpanichkul, Ackchai & Ferreira, Luis (2006) Evaluating Location of Intermodal Freight Terminals. In Mao, Baohua, Tian, Zongzhong, Gao, Ziyou, & Huang, Haijun (Eds.) Traffic and Transportation Studies Proceedings of ICTTS 2006. Science Press, Beijing, pp. 1000-1008.

Skitmore, Martin & Smyth, Hedley (2009) Marketing and pricing strategy. In Pryke, Stephen (Ed.) Construction Supply Chain Management: Concepts and Case Studies. Wiley- Blackwell, Oxford, England, pp. 92-112.

Sloan, Mellini (2005) Ocklawaha River restoration : the fate of the Rodman Reservoir. In Scholz, John T. & Stiftel, Bruce (Eds.) Adaptive Governance and Water Conflict : New Institutions for Collaborative Planning. Resources for the Future, Washington, D.C, pp. 100-105.

Smiles, Lexie E. (2005) Visual communication. In D : -for design : -for derelique. QUT Publications, Australia, Queensland, Brisbane, pp. 20-21.

Smith, Dianne J. (2005) Do I decorate? In Abbott, Sarah, Hortz, Allison, Scullin, Suzy, Smith, Dianne J., & Kurucz, Rohit (Eds.) D : -for design : -for derelique. Queensland University of Technology, Australia, Queensland, Brisbane, pp. 15-19.

Smith, Dianne J. (2006) Interior design as social design - what? when? and why? In Smith, Dianne J. (Ed.) Exit : QUT interior design 2006. School of Design, Queensland University of Technology, Australia, Queensland, Brisbane, pp. 128-130.

Smith, Dianne J. (2006) Moving on from university life. In Smith, Dianne J. (Ed.) Exit : QUT interior design 2006. School of Design, Queensland University of Technology, Australia, Queensland, Brisbane, pp. 12-13.

Stairmand, Nicole (2005) Interior design and conservation. In D : -for design : -for derelique. QUT Publications, Australia, Queensland, Brisbane, pp. 50-51.

Stewart, Susan & Taylor, Jennifer (2001) The Building and its Making. In Taylor, J (Ed.) Tall Buildings: Australian Business Going Up: 1945 - 1970. Fine Art Publishing Pty Ltd, Sydney, New South Wales, pp. 126-151.

Stewart, Susan & Taylor, Jennifer (2001) The Building and the City. In Taylor, J (Ed.) Tall Buildings: Australian Business Going Up: 1945 - 1970. Fine Art Publishing Pty Ltd, Sydney, New South Wales, pp. 92-111.

Stewart, Susan & Taylor, Jennifer (2001) The Building and the Sun. In Taylor, J (Ed.) Tall Buildings: Australian Business Going Up: 1945 - 1970. Fine Art Publishing Pty Ltd, Sydney, New South Wales, pp. 112-125.

Sun, Yong, Fidge, Colin J., & Ma, Lin (2012) A flexible asset maintenance decision-making process model. In Amadi-Echendu, Joe, Brown, Kerry A., Willett, Roger, & Mathew, Joseph (Eds.) Asset Condition, Information Systems and Decision Models. Springer-Verlag, London, pp. 149-168.

Tam, Hwa-Yaw, Liu, Shun-yee, Ho, Siu Lau, & Ho, Tin Kin (2011) Fiber Bragg Grating sensors for railway systems. In Cusano , Andrea, Cutolo, Antonello, & Albert, Jacques (Eds.) Fiber Bragg Grating Sensors : Recent Advancements, Industrial Applications and Market Exploitation. Bentham Science Publishers, Oak Park, IL, pp. 197-217.

Taylor, Jennifer (2001) Australia... In Taylor, J (Ed.) Tall Buildings: Australian Business Going Up: 1945 - 1970. Fine Art Publishing Pty Ltd, Sydney, New South Wales, pp. 14-19.

Taylor, Jennifer (2001) Light Buildings of the Fifties. In Taylor, J (Ed.) Tall Buildings: Australian Business Going Up: 1945 - 1970. Fine Art Publishing Ltd, Sydney, New South Wales, pp. 30-61.

Taylor, Jennifer (2001) Shelter in the Sixties. In Taylor, J (Ed.) Tall Buildings: Australian Business Going Up: 1945 - 1970. Fine Art Publishing Pty Ltd, Sydney, New South Wales, pp. 62-91.

Taylor, Jennifer (2001) ... and the Tall Building. In Taylor, J (Ed.) Tall Buildings: Australian Business Going Up: 1945 - 1970. Fine Art Publishing Ltd, Sydney, New South Wales, pp. 20-29.

Taylor, Jennifer E. (2007) Some early "architects" of New Caledonia. In Angleviel, F. (Ed.) History of New Caledonia - Volume 1. Les Indes Savantes, Paris, pp. 251-256.

Taylor, Mark (2006) Architecture and interior : a roam of one's own. In Taylor, Mark & Preston, Julieanna (Eds.) Intimus : interior design theory reader. Wiley-Academy, United Kingdom, Chichester, pp. 339-344.

Taylor, Mark (2006) Becoming-artistic. In Inview : Works from the VUW Art Collection. Adam Art Gallery, Wellington, NZ, p. 68.

Taylor, Mark (2009) Diagramming the interior. In The Diagrams of Architecture. John Wiley & Sons Ltd, pp. 134-141.

Taylor, Mark (2008) Full body massage suite. In Durbach, Neil, Frost, Vince, Lewin, Wendy, Thompson, Kerstin, & Warner, Gary (Eds.) Abundant : Australian Pavilion 11th International Architecture Exhibition la biennale di Venezia. Royal Australian Institute of Architects, Barton, A.C.T, p. 117.

Taylor, Mark (2007) Hertzian space : modelling spatial presence. In Burry, Mark, Ostwald, Michael, Downton, Peter, & Mina, Andrea (Eds.) Homo Faber : modelling ideas. Spatial Information Architecture Laboratory, Australia, Victoria, Melbourne, pp. 148-153.

150

Taylor, Mark (2007) On Walden Pond: Thoreau's house as architectural model. In Burry, Mark, Ostwald, Michael, Downton, Peter, & Mina, Andrea (Eds.) Homo Faber: modelling architecture. Spatial Information Architecture Laboratory and the Melbourne Museum, Australia, Victoria, Melbourne, pp. 36-41.

Taylor, Mark (2010) Patterns. In Peressut, Luca Basso, Forino, Imma, Postiglione, Genaro, & Rizzi, Roberto (Eds.) Interior Wor(l)ds. Umberto Allemandi & C., Torino, pp. 228-233.

Taylor, Mark (2005) Projected Evolution: Expanding Self into the Environs. In Wilson, Andrew (Ed.) Review 2004 : projects review of architecture at QUT in 2004. Queensland University of Technology, School of Design, Brisbane, pp. 27-34.

545

Taylor, Mark (2001) Scene 8. In Borden, Iain & McCreery, Sandy (Eds.) New Babylonians: contemporary visions of Situationist City. Wiley-Academy, London, pp. 60-63.

Taylor, Mark & Burry, Mark C. (2007) Hertzian space. In Gigli, John, Hay, Frazer, Hollis, Edward, Milligan, Andrew, Milton, Alex, & Plunkett, Drew P (Eds.) Thinking inside the box : a reader in interior design for the 21st century. Middlesex University Press, United Kingdom, London, pp. 155-164.

Taylor, Mark & Preston, Julieanna (2006) Proximities. In Taylor, Mark & Preston, Julieanna (Eds.) Intimus : interior design theory reader. John Wiley and Sons, Inc, United Kingdom, Chichester, pp. 6-13.

Taylor, Mark, Preston, Julieanna, & Charleson, Andrew (2000) The Myth of the Matter: Parallel Surfaces of Seismic Linings. In Ostwald, Michael J. & Moore, R. J. (Eds.) Re-Framing Architecture: Theory, Science and Myth. Archadia Press, Sydney, pp. 189-199.

438

Teriman, Suharto, Yigitcanlar, Tan, & Mayere, Severine (2010) Sustainable urban development : an integrated framework for urban planning and development. In Yigitcanlar, Tan (Ed.) Rethinking sustainable development : urban management, engineering, and design. IGI Global, Engineering Science Reference, Hershey, Pennsylvania, pp. 1-14.

Teriman, Suharto, Yigitcanlar, Tan, & Mayere, Severine (2010) Sustainable urban infrastructure development in south east Asia : evidence from Hong Kong, Kuala Lumpur and Singapore. In Yigitcanlar, Tan (Ed.) Sustainable Urban and Regional Infrastructure Development : Technologies, Applications and Management. IGI Global, Information Science Reference, United States of America, pp. 152-164.

287

Thilakarathna, Herath, Thambiratnam, David, Dhanasekar, Manicka, & Perera, Nimal (2010) Infrastructure sustainability : vulnerability of axially loaded columns subjected to transverse impact loads. In Rethinking sustainable development : urban management, engineering, and design. IGI Global, Hershey, Pennsylvania, pp. 202-211.

Thomas, Glenn S. (2007) Sustainability learnt from difference. In Bull, Catherin, Boontharm, Davisi, Parin, Claire, Radovic, Darko, & Tapie, Guy (Eds.) Cross-cultural urban design : global or local practice? Routledge, United States of America, New York, pp. 174-186.

Thomson, Sheona (2004) Places within and without : memory, the literary imagination, and the project in the design studio. In Bastea, Eleni (Ed.) Memory and architecture. University of New Mexico Press, United States of America, New Mexico, Albuquerque, pp. 317-329.

Thomson, Sheona A. (2005) What should a foundation unit in design history look like in the 21st century? In D : -for design : -for derelique. QUT Publications, Australia, Queensland, Brisbane, pp. 47-49.

Tikdari, A. G., Bevrani, Hassan, & Ledwich, Gerard (2011) A descriptive approach for power system stability and security assessment. In Vasant, Pandian, Barsoum, Nader, & Webb, Jeffrey (Eds.) Innovation in Power, Control and Optimization: Emerging Energy Technologies. IGI Global, The United States of America, pp. 293-314.

Timperley, A. John, Biau, David, Chew, David, & Whitehouse, Sarah L. (2010) Aetiology of Hip dislocation. In Ling, Robin S.M., Lee, A.J. Clive, Gie, Graham A., Timperley, A. John, Hubble, Matthew J.W., Howell, Jonathan R., et al. (Eds.) The Exeter Hip. Exeter Hip Publishing, Exeter, pp. 141-152.

Timperley, A. John, Howell, Jonathan R., Hubble, Matthew J. W., Gie, Graham A., & Whitehouse, Sarah L. (2013) Cemented femoral components. In Berry, Daniel M. & Lieberman, Jay (Eds.) Surgery of the Hip. Elsevier, Philadelphia, PA, pp. 837-847.

Timperley, A. John & Whitehouse, Sarah L. (2010) The use of cement in hip arthroplasty. In Ling, Robin S.M., Lee, A.J. Clive, Gie, Graham A., Timperley, A. John, Hubble, Matthew J.W., Howell, Jonathan R., et al. (Eds.) The Exeter Hip. Exeter Hip Publishing, Exeter, UK, pp. 153-160.

Too, Eric G. (2010) A framework for strategic infrastructure asset management. In Amadi-Echendu, Joe E., Brown, Kerry A., Willet, Roger, & Mathew, Joseph (Eds.) Definitions, Concepts and Scope of Engineering Asset Management. Springer, pp. 31-60.

Too, Eric G., Betts, Martin, & Kumar, Arun (2010) Sustainable infrastructure assets : capability for infrastructure capacity management. In Yigitcanlar, Tan (Ed.) Rethinking Sustainable Development : Urban Management, Engineering, and Design. IGI Global, Hershey, Pa, pp. 296-305.

Trigunarsyah, Bambang & Skitmore, Martin (2010) The key to successful implementation : project management of sustainable infrastructure provision. In Yigitcanlar, Tan (Ed.) Sustainable Urban and Regional Infrastructure Development : Technologies, Applications and Management. IGI Global, Information Science Reference, Hershey, PA, pp. 310-322.

Upcroft, Ben, Makarenko, Alexei, Brooks, Alex, Moser, Michael, Alempijevic, Alen, Donikian, Ashod, et al. (2011) Empirical evaluation of an autonomous vehicle in an urban environment. In Rouff, Chirstopher & Hinchey, Mike (Eds.) Experience from the DARPA Urban Challenge. Springer. (In Press)

Usher, Kane, Roberts, Jonathan, Corke, Peter, & Duff, Elliot (2006) Vision-based navigational competencies for a car-like vehicle. In Ang, Marcelo. H & Khatib, Oussama (Eds.) Experimental Robotics IX The 9th International Symposium on Experimental Robotics. Springer Berlin / Heidelberg, pp. 471-481.

Veeregowda, Babu, Bharali, Gautam, & Washington, Simon (2009) Probability and statistics. In Kraft, W (Ed.) Traffic Engineering Handbook, 6th edition. Institute of Transportation Engineers, United States of America, pp. 165-210.

Velibeyoglu, Koray & Yigitcanlar, Tan (2009) Information and communication technology for E-regions. In Khosrow-Pour , Mehdi (Ed.) Encyclopedia of Information, Science and Technology. IGI Global, Hershey, Pa, pp. 1944-1949.

Välimaa, Jussi, Tynjälä, Päivi, & Boulton-Lewis, Gillian M. (2006) Introduction : changing world, changing higher education. In Higher Education and Working Life : Collaborations, Confrontations and Challenges. Elsevier, New York, pp. 1-6.

Walker, Derek H. & Kumar, Arun (2005) Project Management in Highway Construction. In Fwa, T.F. (Ed.) Handbook of Highway Engineering. CRC Press, USA, 15.1-15.35.

Wang, Jun (2003) Economic Optimization of Machining Operations in Computer Aided Manufacturing Systems. In Leondes, C (Ed.) Computer Aided and Integrated Manufacturing Systems - Volume 5: Manufacturing Processes. World Scientific Publishing Co. Pty Ltd, River Edge, NJ, USA, pp. 131-160.

Wang, Liang, Chan, Tommy H.T., Thambiratnam, David, & Tan, Andy (2010) Structural health monitoring : vibration-based damage detection and condition assessment of bridges. In Yigitcanlar, Tan (Ed.) Rethinking Sustainable Development : Urban Management, Engineering, and Design. IGI Global, Pennsylvania.

Webb, Robert M. (2004) Issues of Co-Ordinate Collection Technologies for Rural Property Boundaries Surveys in Queensland. In Gomez, Rafael (Ed.) R+D: A celebration of Research. QUT School of Design and Built Environment, Brisbane, pp. 98-103.

239

Wiewiora, Anna, Trigunarsyah, Bambang, & Murphy, Glen D. (2010) Knowledge transfer in project-based organisations : the need for a unique approach. In Yigitcanlar, Tan (Ed.) Rethinking Sustainable Development : Planning, Infrastructure Engineering, Design and Managing Urban Infrastructure. IGI Global, pp. 306-317.

Wilson, Andrew C. & Riley, Angela (2005) Reflections on an enduring partnership. In Wilson, Andrew C. (Ed.) Hayes and Scott : post-war houses. University of Queensland Press, Australia, Queensland, St Lucia, pp. 2-17.

Wright, Natalie (1995) Design and culture : an ongoing cultural experience. In Popovic, Vesna, Whitman, Paula, & Hudson, Brian (Eds.) Design for the Community. Queensland University of Technology, Brisbane, Qld., pp. 90-93.

Wu , Chengtie & Xiao, Yin (2011) Mesoporous bioglass/silk composite scaffolds for bone tissue engineering. In Pignatello, Rosario (Ed.) Biomaterial (Book 2). INTECH Open Access Publisher, Croatia, pp. 269-286.

Wyeth, Gordon & Kee, Damien (2004) Distributed control of gait for a humanoid robot. In Polani, Daniel, Browning, Brett, Bonarini, Andrea, & Yoshida, Kazuo (Eds.) RoboCup 2003 : Robot Soccer World Cup VII. Springer Berlin / Heidelberg, pp. 703-711.

Wyeth, Gordon, Milford, Michael, Schulz, Ruth, & Wiles, Janet (2011) The RatSLAM project : robot spatial navigation. In Krichmar, Jeffrey & Wagatsuma, Hiroaki (Eds.) Neuromorphic and Brain-Based Robots. Cambridge University Press, New York, pp. 87-108.

Wyeth, Peta, Venz, Mark, & Wyeth, Gordon (2004) Scaffolding children’s robot building and programming activities. In Polani, Daniel, Browning, Brett, Bonarini, Andrea, & Yoshida, Kazuo (Eds.) RoboCup 2003 : Robot Soccer World Cup VII. Springer Berlin / Heidelberg, pp. 308-319.

Wyeth, Peta & Wyeth, Gordon (2008) Robot building for preschoolers. In Visser, Ubbo, Ribeiro, Fernando, Ohashi , Takeshi, & Dellaert, Frank (Eds.) RoboCup 2007 : Robot Soccer World Cup XI. Springer Berlin / Heidelberg, pp. 124-135.

Xiao, Yin, Fan, Wei, Bouwense, Stefan AW, & Crawford, Ross W. (2009) The role of periosteum : a neglected aspect of osteoporosis. In Mattingly, Bilar E. & Pillare, Albert C. (Eds.) Osteoporosis : Etiology, Diagnosis, and Treatment. Nova Science Publishers, Inc., Hauppauge, New York, pp. 235-249.

Xiao, Yin & Kaur, Navdeep (2012) Overview of mesenchymal stem cells. In Xiao, Yin (Ed.) Mesenchymal Stem Cells. Nova Publishers, New York, pp. 1-14.

Xiao, Yin & Yuen, Jones (2011) The biological application of cobalt. In Vidmar, Lucas (Ed.) Cobalt : Characterizatics, Compounds and Applications. Nova Science Publishers, New York, pp. 307-317.

Xu, Zhi Gang, Tang, Mingxi, & Frazer, John H. (2002) From concept to embodiment : challenge and strategy. In Gero, John S. (Ed.) Artificial Intelligence in Design '02. Kluwer Academic Publishers, The Netherlands, Dordrecht, pp. 215-236.

Yan, Fuhua, Lin, Minkui, & Xiao, Yin (2012) Periodontal regeneration and mesenchymal stem cells. In Xiao, Yin (Ed.) Mesenchymal Stem Cells. NOVA Science Publishers, Inc, New York, pp. 177-196.

Yang, Jay, Brandon, Peter, & Sidwell, Anthony (2005) Introduction : bridging the gaps in smart and sustainable built environments. In Yang, Jay, Brandon, Peter, & Sidwell, Anthony (Eds.) Smart and sustainable built environments. Blackwell Publishing, United States of America, Massachusetts, Malden, ix-xviii.

Yang, Jay & Zhang, Guomin (2005) Raised floor systems for the sustainable fit-out of office buildings. In Yang, Jay, Brandon, Peter, & Sidwell, Anthony (Eds.) Smart and sustainable built environments. Blackwell Publishing, United States of America, Massachusetts, Malden, pp. 138-147.

Yigitcanlar, Tan (2010) Information and communication technologies : catalysts for sustainable development. In Yigitcanlar, Tan (Ed.) Rethinking Sustainable Development : Urban Management, Engineering, and Design. IGI Global, Engineering Science Reference, United States of America, pp. 73-89.

Yigitcanlar, Tan (2010) Informational city. In Hutchinson, Ray (Ed.) Encylopedia of Urban Studies. Sage Publications, Inc., Thousand Oaks, Calif, pp. 1-3.

Yigitcanlar, Tan (2009) Intelligent urban management systems : online decision support systems for ubiquitous cities. In Ubiquitous City: Future City, City of Future. Hanbat National University Press, Korea, Deajeon, pp. 205-221.

Yigitcanlar, Tan (2010) Planning online : a community-based interactive decision-making model. In Silva, Carlos Nunes (Ed.) Handbook of Research on E-Planning : ICTs for Urban Development and Monitoring. IGI Global, Hershey, Pa., pp. 15-35.

Yigitcanlar, Tan (2010) Preface. In Yigitcanlar, Tan (Ed.) Rethinking Sustainable Development : Urban Management, Engineering and Design. IGI Global, Hershey, Pa, xxix-xxxiv.

Yigitcanlar, Tan (2010) Preface : rethinking sustainable development : urban management, engineering, and design. In Yigitcanlar, Tan (Ed.) Rethinking Sustainable Development : Urban Management, Engineering, and Design. IGI Global, Hershey, Pa, xxix-xxxiv.

Yigitcanlar, Tan (2010) Preface : sustainable urban and regional infrastructure development : technologies, applications and management. In Yigitcanlar, Tan (Ed.) Sustainable Urban and Regional Infrastructure Development : Technologies, Applications and Management. IGI Global, Hershey, Pa., xxix-xxxx.

Yigitcanlar, Tan (2008) Public-oriented interactive environmental decision support system. In Wise, S. & Craglia, M. (Eds.) GIS and Evidence-Based Policy Making. CRC Press, Taylor & Francis Group, Boca Raton, Fla., pp. 347-363.

Yigitcanlar, Tan & Baum, Scott (2008) Benchmarking local E-Government. In Anttiroiko, Ari-Veikko (Ed.) Electronic Government : Concepts, Methodologies, Tools, and Applications. IGI Global, Hershey Pa, pp. 371-378.

Yigitcanlar, Tan & Baum, Scott (2006) Benchmarking local e-government. In Khosrow-Pour , Mehdi (Ed.) Encyclopedia of e-commerce, e-government, and mobile commerce. Idea Group Reference, United States of America, Pennsylvania, Hershey, pp. 37-42.

Yigitcanlar, Tan & Baum, Scott (2006) E-Government and the digital divide. In Khosrow-Pour, Mehdi (Ed.) Encyclopedia of e-commerce, e-government, and mobile commerce. Idea Group Reference (IGI Global), United States of America, Pennsylvania, Hershey, pp. 353-358.

Yigitcanlar, Tan & Baum, Scott (2008) E-Government and the digital divide. In Anttiroiko, Ari-Veikko (Ed.) Electronic Government : Concepts, Methodologies, Tools, and Applications. IGI Global, Hershey Pa, pp. 1718-1725.

Yigitcanlar, Tan & Gudes, Ori (2008) Web-based public participatory GIS. In Adam, Frédéric & Humphreys, Patrick (Eds.) Encyclopedia of Decision Making and Decision Support Technologies. IGI Global Publishing, Hershey, Pa, pp. 969-976.

Yigitcanlar, Tan & Han, Jung Hoon (2011) Ubiquitous eco cities : infrastructure, technology and management. In Firmino, Rodrigo Jose, Duarte, Fabio, & Ultramari, Clovis (Eds.) ICTs for Mobile and Ubiquitous Urban Infrastructures : Surveillance, Locative Media and Global Networks. IGI Global, Hershey, Pa, pp. 88-107.

Yigitcanlar, Tan & Han, Jung Hoon (2010) Urban telecommunications network : technology convergence and urban infrastructure. In Yigitcanlar, Tan (Ed.) Sustainable Urban and Regional Infrastructure Development : Technologies, Applications and Management. IGI Global, Engineering Science Reference, United States of America, pp. 77-90.

Yigitcanlar, Tan, Hoon Han, Jung, & Lee, Sang Ho (2008) Online environmental information systems. In Adam, Frederic & Humphreys, Patrick (Eds.) Encyclopedia of Decision Making and Decision Support Technologies. IGI Global, Hershey Pa, pp. 691-698.

Yigitcanlar, Tan, Mahizhnan, Arun, Baum, Scott, & Andiappan, Narayanan (2008) E-Government in the Knowledge Society: The case of Singapore. In Creative Urban Regions: Harnessing Urban Technologies to Support Knowledge City Initiatives. Information Science Reference, Hershey, PA, USA, pp. 132-147.

Yigitcanlar, Tan & Martinez-Fernandez, Cristina (2010) Making space and place for knowledge production : socio-spatial development of knowledge community precincts. In Metaxiotis, Kostas, Carrillo, Francisco, & Yigitcanlar, Tan (Eds.) Knowledge-Based Development for Cities and Societies : Integrated Multi-Level Approaches. IGI Global/Information Science Reference, Hershey, Pa, pp. 99-115.

Yigitcanlar, Tan & Sarimin, Muna (2010) Orchestrating knowledge-based urban development : lessons from multimedia super corridor, Malaysia. In Metaxiotis, Kostas, Carrillo, Francisco, & Yigitcanlar, Tan (Eds.) Knowledge-Based Development for Cities and Societies : Integrated Multi-Level Approaches. IGI Global/Information Science Reference, Hershey, Pa, pp. 281-295.

189

Yigitcanlar, Tan & Saygin, Omur (2008) Online urban information systems. In Adam, Frederic & Humphreys, Patrick (Eds.) Encyclopedia of Decision Making and Decision Support Technologies. IGI Global, Hershey, Pa, 699-708 .

Yigitcanlar, Tan, Saygin, Omur, & Han, Jung Hoon (2008) Online participatory decision support tools for knowledge-based urban development. In Creative Urban Regions: Harnessing Urban Technologies to Support Knowledge City Initiatives. Information Science Reference, Hersey, PA, pp. 186-202.

Yigitcanlar, Tan & Velibeyoglu, Koray (2008) Queensland's Smart State Initiative : a successful knowledge based urban development strategy. In Yigitcanlar, Tan, Velibeyoglu, Koray, & Baum, Scott (Eds.) Knowledge-Based Urban Development : Planning and Applications in the Information Era. IGI Global, Information Science Reference, Hershey, Pa., pp. 116-131.

128

Yigitcanlar, Tan & Velibeyoglu, Koray (2008) Strengthening the knowledge-base of cities through ICT strategies. In Cartelli, A. & Palma, M. (Eds.) Encyclopaedia Information Communication Technology. IGI Global, Information Science Reference, Hershey, Pa., pp. 728-734.

Yigitcanlar, Tan & Velibeyoglu, Koray (2008) Understanding the supply side: ICT experience of Marmara Region, Turkey. In Creative Urban Regions: Harnessing Urban Technologies to Support Knowledge City Initiatives. Information Science Reference, Hershey PA, USA, pp. 245-262.

Journal Article

A. Boora, Arash, Zare, Firuz, & Ghosh, Arindam (2009) Utilizing robustness of positive buck-boost converter against input voltage and load current disturbances. Australian Journal of Electrical & Electronics Engineering, 6(2).

A. Boora, Arash, Zare, Firuz, & Ghosh, Arindam (2010) A new family of multi-output DC-DC converter topologies to supply an asymmetrical four-level diode-clamped inverter. COMPEL : The international journal for computation and mathematics in electrical and electronic engineering. (In Press)

215

Abbah, Sunny A., Lam, Christopher X. L., Hutmacher, Dietmar W., Goh, James C. H., & Wong, Hee-Kit (2009) Biological performance of a polycaprolactone-based scaffold used as fusion cage device in a large animal model of spinal reconstructive surgery. Biomaterials, 30(28), pp. 5086-5093.

Abbasalizadeh Boora, Arash, Nami, Alireza, Zare, Firuz, Ghosh, Arindam, & Blaabjerg, Frede (2010) Voltage-sharing converter to supply single-phase asymmetrical four-level diode-clamped inverter with high power factor loads. IEEE Transactions on Power Electronics, 25(10), pp. 2507-2520.

Abbott-Johnson, Winsome, Kerlin, Paul, Clague, Alan, Johnson, Helen, & Cuneo, Ross (2011) Relationships between blood levels of fat soluble vitamins and disease etiology and severity in adults awaiting liver transplantation. Journal of Gastroenterology and Hepatology, 26(9), pp. 1402-1410.

Achari, Muthuraaman Bhagavathi, Ganesan, S., Latha, S., & Maruthamuthu, P. (2007) Comparative studies of dye sensitized solar cells fabricated with triazine coordinated ruthenium (II) complexes using different electrodes. Ceylon Journal of Science : Physical Sciences, 12, pp. 13-17.

Achari, Muthuraaman Bhagavathi, Murugesan, S., Mathew, Vinod, Ganesan, S., Paul, B. Joseph, Madhavan, J., et al. (2008) An investigation on the performance of a silver ionic solid electrolyte system for a new detergent-based nanocrystalline dye-sensitized solar cell. Solar Energy Materials and Solar Cells, 92(12), pp. 1712-1717.

Acharya, Rajendra, Chandran, Vinod, Chua, K, & Lim, C.M. (2008) Cardiac state diagnosis using higher order spectra of heart rate variability. Journal of Medical Engineering & Technology, 32(2), pp. 145-155.

Acharya, Rajendra, Chandran, Vinod, Chua, K, & Lim, C.M. (2008) Computer-based analysis of cardiac state using entropies, recurrence plots and poincare geometry. Journal of Medical Engineering & Technology, 32(4), pp. 263-272.

Ackroyd, Christopher E., Whitehouse, Sarah L., Newman, John H., & Joslin, Chris C. (2002) A comparative study of the medial St Georg Sled and Kinematic total knee arthroplasties. Ten year survivorship. Journal of Bone and Joint Surgery: British Volume, 84(5), pp. 667-672.

Adabi Firouzjaee, Jafar & Zare, Firuz (2009) Investigation of shaft voltage in wind turbine systems with induction generators. IEEJ Transactions on Industry Applications, 129(11), pp. 1092-1100.

Adabi Firouzjaee, Jafar, Zare, Firuz, Ghosh, Arindam, & Lorenz, Robert D. (2009) Calculations of capacitive couplings in induction generators to analyse shaft voltage. IET Power Electronics. (In Press)

350

Adam, Clayton J. (2011) Endogenous musculoskeletal tissue engineering : a focussed perspective. Cell and Tissue Research. (In Press)

Adam, Clayton J. (2005) The geometry of a circular arc does not accurately describe spinal curvature in scoliosis. Journal of the National Medical Association, 97(8), pp. 1179-1180.

Adam, Clayton J. & Askin, Geoffrey N. (2006) Automatic measurements of vertebral rotation in idiopathic scoliosis. Spine: an international journal for the study of the spine, 31(3), E80-E83.

158

Adam, Clayton J. & Askin, Geoffrey N. (2009) Lateral bone density variations in the scoliotic spine. BONE, 45(4), pp. 799-807.

141

Adam, Clayton J., Askin, Geoffrey N., & Pearcy, Mark J. (2008) Gravity-induced torque and intravertebral rotation in idiopathic scoliosis. Spine: an international journal for the study of the spine, 33(2), E30-E37.

172

Adam, Clayton J., Cargill, Sara C., & Pearcy, Mark J. (2007) CT-based Volumetric Reconstruction of the Pulmonary System in Scoliosis: Trends in Lung Volume and Lung Volume Asymmetry with Spinal Curve Severity. Journal of Pediatric Orthopedics, 27(6), pp. 677-681.

Adam, Clayton J., Izatt, Maree T., Harvey, Jason R., & Askin, Geoffrey N. (2005) Variability in Cobb angle measurements using reformatted computed tomography scans. Spine: an international journal for the study of the spine, 30(14), pp. 1664-1669.

311

Adam, Clayton J. & Loughran, Jeffrey G. (2007) Finite element prediction of the performance of sugarcane rolling mills. International Sugar Journal, 109(1301), pp. 272-284.

481

Adam, Clayton J. & Loughran, Jeffrey G. (2004) Multi-variate analysis of frictional interaction between grooved rollers and prepared sugarcane. International Journal of the American Society of Agricultural and Biological Engineers, 47(5), pp. 1611-1618.

423

Adam, Clayton J. & Loughran, Jeffrey G. (2004) Seepage induced consolidation in permeability measurements for porous media - a finite element investigation. Journal of Porous Media, 7(2), pp. 101-117.

Adam, Clayton J. & Loughran, Jeffrey G. (2005) The effect of blanket thickness on extraction energy in sugarcane rolling mills: a finite element investigation. Biosystems Engineering, 92(2), pp. 255-263.

686

Adam, Clayton J., Pearcy, Mark J., & McCombe, Peter (2003) Stress analysis of interbody fusion – finite element modelling of inter-vertebral implant and vertebral body. Clinical Biomechanics, 18(4), pp. 265-272.

709

Adam, Clayton J. & Swain, Mike V. (2011) The effect of friction on indenter force and pile-up in numerical simulations of bone nanoindentation. Journal of the Mechanical Behavior of Biomedical Materials, 4(7), pp. 1554-1558.

Adighibe, Charles, Skitmore, Martin, & Wong, Johnny (2010) The management of transport construction projects : a survey of public sector organisations in Queensland Australia. The International Journal of Construction Management, 10(1), pp. 17-33.

Aebli, Nikolaus, Goss, Benjamin G., Thorpe, Paul, Williams, Richard P., & Krebs, Jorg (2006) In Vivo Temperature Profile of Intervertebral Discs and Vertebral Endplates During Vertebroplasty: An Experimental Study in Sheep. Spine: an international journal for the study of the spine, 31(15), pp. 1674-1678.

Agha Zadeh, Ramin, Ghosh, Arindam, & Ledwich, Gerard (2010) Combination of Kalman filter and least error square techniques in power system. IEEE Transactions on Power Delivery, 25(4), pp. 1-13.

168

Agha Zadeh, Ramin, Ghosh, Arindam, & Ledwich, Gerard (2009) Online Estimation of Distorted Power System Signal Parameters. IET Generation, Transmission & Distribution. (In Press)

117

Agha Zadeh, Ramin, Ghosh, Arindam, Ledwich, Gerard, & Zare, Firuz (2010) Analysis of Phasor Measurement Method in Tracking the Power Frequency of Distorted Signals. IET Generation, Transmission & Distribution. (In Press)

208

Ahmad, Sariati & Skitmore, Martin (2003) Work-family conflict: a survey of Singaporean workers. Singapore Management Review, 25(1), pp. 35-52.

1,620

Ahmad, Zaini & Ahsan, Mohammed (2009) Corrosion studies on the plasma-sprayed nanostructured titanium dioxide coating. Anti-Corrosion Methods and Materials, 56(4), pp. 187-195.

295

Ahmad, Zaini & Thambiratnam, David (2009) Application of foam-filled conical tubes in enhancing the crashworthiness performance of vehicle protective structures. International Journal of Crashworthiness, 14(4), pp. 349-363.

Ahmad, Zaini & Thambiratnam, David (2008) Crushing response of foam-filled conical tubes under quasi-static axial loading. Materials and Design, 30(7), pp. 2393-2403.

Ahmad, Zaini, Thambiratnam, David, & Tan, Andy (2010) Dynamic energy absorption characteristics of foam-filled conical tubes under oblique impact loading. International Journal of Impact Engineering, 37(5), pp. 475-488.

Ahmad, Zaini & Thambiratnam, David P. (2008) Dynamic computer simulation and energy absorption of foam-filled conical tubes under axial impact loading. .

Ahmad, Zaini & Thambiratnam, David P. (2008) Numerical studies on the quasi-static axial crushing and energy absorption of foam-filled conical tubes. .

Ahmed, S., Rasul, M. G., Martens, W. N., Brown, R., & Hashib, M. A. (2011) Advances in heterogeneous photocatalytic degradation of phenols and dyes in wastewater : a review. Water, Air, & Soil Pollution, 215(1-4), p. 3.

898

Ahmed, S., Rasul, M.G., Brown, R., & Hashib, M.A. (2011) Influence of parameters on the heterogeneous photocatalytic degradation of pesticides and phenolic contaminants in wastewater : a short review. Journal of Environmental Management, 92(3), pp. 311-330.

947

Ahmed, S., Rasul, M.G., Martens, W.N., Brown, R.J., & Hashib, M.A. (2010) Heterogeneous photocatalytic degradation of phenols in wastewater : a review on current status and developments. Desalination, 261(1-2), pp. 3-18.

832

Ahmed, Warish (2007) Limitations of library-dependent microbial source tracking methods. Water : official journal of the Australian Water and Wastewater Association, 34(1), pp. 96-101.

Ahmed, Warish, Goonetilleke, Ashantha, & Gardner, Ted (2008) Alternative indicators for detection and quantification of faecal pollution. Water, 39(1), pp. 46-49.

Ahmed, Warish, Goonetilleke, Ashantha, & Gardner, Ted (2010) Human and bovine adenoviruses for the detection of source-specific fecal pollution in coastal waters in Australia. Water Research, 44(16), pp. 4662-4673.

161

Ahmed, Warish, Goonetilleke, Ashantha, & Gardner, Ted (2010) Implications of faecal indicator bacteria for the microbiological assessment of roof harvested rainwater quality in Southeast Queensland, Australia. Canadian Journal of Microbiology, 56(6), pp. 471-479.

Ahmed, Warish, Goonetilleke, Ashantha, & Gardner, Ted (2009) Quantitative detection of pathogens in roof-harvested rainwater. Microbiology Australia, 30(1), pp. 35-37.

193

Ahmed, Warish, Goonetilleke, Ashantha, Powell, Daniel, Chauhan, Kanika, & Gardner, Ted (2009) Comparison of molecular markers to detect fresh sewage in environmental waters. Water Research, 43(19), pp. 4908-4917.

495

Ahmed, Warish, Goonetilleke, Ashantha, Powell, Daniel, & Gardner, Ted (2009) Evaluation of multiple sewage-associated bacteroides PCR markers for sewage pollution tracking. Water Research, 43(19), pp. 4872-4877.

211

Ahmed, Warish, Hargreaves, Megan, Goonetilleke, Ashantha, & Katouli, Mohammad (2008) Population similarity analysis of indicator bacteria for source prediction of fecal pollution in a recreational coastal lake. Marine Pollution Bulletin, 56(8), pp. 1469-1475.

176

Ahmed, Warish, Huygens, Flavia, & Goonetilleke, Ashantha (2008) Real-time PCR detection of pathogenic micro-organisms in roof-harvested rainwater in South East Queensland, Australia. Applied and Environmental Microbiology, 74(17), pp. 5490-5496.

154

Ahmed, Warish & Katouli, Mohammad (2008) Phenotypic variations of enterococci in surface waters: analysis of biochemical fingerprinting data from multi-catchments. Journal of Applied Microbiology, 105(2), pp. 452-458.

Ahmed, Warish, Neller, Ron, & Katouli, Mohammad (2005) Evidence of septic system failure determined by a biochemical fingerprinting method. Journal of Applied Microbiology, 98(4), pp. 910-920.

Ahmed, Warish, Neller, Ron, & Katouli, Mohammad (2005) Faecal source tracking in surface waters: A review of faecal indicator microorganisms and current methods. Environmental Health, 5(4), pp. 51-68.

Ahmed, Warish, Neller, Ron, & Katouli, Mohammad (2005) Host Species-Specific Metabolic Fingerprint Database for Enterococci and Escherichia coli and Its Application To Identify Sources of Fecal Contamination in Surface Waters. Applied and Environmental Microbiology, 71(8), pp. 4461-4468.

Ahmed, Warish, Neller, Ron, & Katouli, Mohammad (2006) Population similarity of enterococci and Escherichia Coli in surface waters: A predictive tool to trace the sources of fecal contamination. Journal of Water and Health, 4(3), pp. 347-356.

Ahmed, Warish, Powell, Daniel, Goonetilleke, Ashantha, & Gardner, Ted (2008) Detection and source identification of faecal pollution in non-sewered catchment by means of host-specific molecular markers. Water Science and Technology, 58(3), pp. 579-586.

Ahmed, Warish, Sawant, Shewata, Huygens, Flavia, Goonetilleke, Ashantha, & Gardner, Ted (2009) Prevalence and occurrence of zoonotic bacterial pathogens in surface waters determined by quantitative PCR. Water Research, 43(19), pp. 4918-4928.

367

Ahmed, Warish, Stewart, Joel, Gardner, Ted, & Powell, Daniel (2008) A real-time polymerase chain reaction assay for the quantitative detection of the human-specific enterococci surface protein marker in sewage and environmental waters. Environmental Microbiology, 10(12), pp. 3255-3264.

Ahmed, Warish, Stewart, Joel, Gardner, Ted, Powell, Daniel, Brooks, Peter, Sullivan, Daryle, et al. (2007) Sourcing faecal pollution: A combination of library-dependent and library-independent methods to identify human faecal pollution in non-sewered catchments. Water Research, 41(16), pp. 3771-3779.

Ahmed, Warish, Stewart, Joel, Powell, Daniel, & Gardner, Ted (2008) Evaluation of Bacteroides markers for the detection of human faecal pollution. Letters in Applied Microbiology, 46(2), pp. 237-242.

Ahmed, Warish, Stewart, Joel, Powell, Daniel, & Gardner, Ted (2008) Evaluation of the host-specificity and prevalence of enterococci surface protein (esp) marker in sewage and its application for sourcing human fecal pollution. Journal of Environmental Quality, 37, pp. 1583-1588.

Ahmed, Warish, Tucker, J., Harper, J., Neller, Ron, & Katouli, Mohammad (2006) Comparison of the efficacy of an existing versus a locally developed metabolic fingerprint database to identify non-point sources of faecal contamination in a coastal lake. Water Research, 40(12), pp. 2339-2348.

Ahmed, Warish, Tucker, Jack, Bettelheim, Karl A., Neller, Ron, & Katouli, Mohammad (2007) Detection of virulence genes in Escherichia Coli of an existing metabolic fingerprint database to predict the sources of pathogenic E. coli in surface waters. Water Research, 41(16), pp. 3785-3791.

Ahmed, Warish, Vieritz, Alison, Gardner, Ted, & Goonetilleke, Ashantha (2009) Microbial risk from rainwater tanks in South East Queensland. Water : Official Journal of the Australian Water and Wastewater Association, 36(8), pp. 80-85.

Ahmed, Warish, Vieritz, Alison, Goonetilleke, Ashantha, & Gardner, Ted (2010) Health risk from the use of roof-harvested rainwater in Southeast Queensland, Australia, as potable or nonpotable water, determined using quantitative microbial risk assessment. Applied and Environmental Microbiology, 76(22), pp. 7382-7391.

211

Ahmed, Warish, Wang, Charles, Goonetilleke, Ashantha, & Gardner, Ted (2010) Evaluating sewage associated JCV and BKV polyomaviruses for sourcing human fecal pollution in a coastal river in Southeast Queensland Australia. Journal of Environmental Quality, 39(5), pp. 1743-1750.

Ahmed, Warish, Yusuf, Rita, Hasan, Imtiaj, Goonetilleke, Ashantha, & Gardner, Ted (2010) Quantitative PCR assay of sewage-associated Bacteroides markers to assess sewage pollution in an urban lake in Dhaka, Bangladesh. Canadian Journal of Microbiology (CJM), 56(10), pp. 838-845.

222

Ahn, Ho Seok, Sa, Inkyu, Lee, Dong-Wook, & Choi, Dongwoon (2011) A playmate robot system for playing the rock-paper-scissors game with humans. Artificial Life and Robotics, 16(2), pp. 142-146.

Ahn, Kyoung, Ahn, Yong, Kim, Yong-Han, Morishita, Shin, & Yang, Bo-Suk (2006) Optimal Design Of Nonlinear Squeeze Film Damper Using Hybrid Global Optimization Technique. Journal of Mechanical Science and Technology, 20(8), pp. 1125-1138.

Ahsan, M., Tesfamichael, T., Ponzoni, A., & Faglia, G. (2011) Sensing properties of e-beam evaporated nanostructured pure and iron-doped tungsten oxide thin films. Sesnors Letters, 9(2), pp. 759-762.

Ahsan, Mohammed, Tesfamichael, Tuquabo, Ionescu, Mehail, Bell, John M., & Motta, Nunzio (2012) Low temperature CO sensitive nanostructured WO3 thin films doped with Fe. Sensors and Actuators B : Chemical, 162(1), pp. 14-21.

Ahuja, Vanita, Yang, Jay, & Shankar, Ravi (2010) Benchmarking framework to measure extent of ICT adoption for building project management. Journal of Construction Engineering and Management, 136(5), pp. 538-545.

276

Ahuja, Vanita, Yang, Jay, & Shankar, Ravi (2009) Benefits of collaborative ICT adoption for building project management. Construction Innovation, 9(3), pp. 323-340.

299

Ahuja, Vanita, Yang, Jay, & Shankar, Ravi (2010) IT-enhanced communication protocols for building project management. Engineering, Construction and Architectural Management, 17(2), pp. 159-179.

Ahuja, Vanita, Yang, Jay, & Shankar, Ravi (2010) Perceptions affecting ICT adoption for building project management in the Indian construction industry. The International Journal of Construction Management, 10(2), pp. 1-18.

Ahuja, Vanita, Yang, Jay, & Shankar, Ravi (2009) Study of ICT adoption for building project management in the Indian construction industry. Automation in Construction, 18(4), pp. 415-423.

359

Ahuja, Vanita, Yang, Jay, Skitmore, Martin, & Shankar, Ravi (2010) An empirical test of causal relationships of factors affecting ICT adoption for building project management : an Indian SME case study. Construction Innovation: information, process, management, 10(2), pp. 164-180.

104

Ai, Xing, He, Lin, Huang, Chuanzhen, Sun, Jing, & Wang, Jun (2002) Study on the Wear Resistance Ability of ZrO2/Al2O3 Ceramic Scissors for Spinning and Weaving. Chinese Journal of Mechanical Engineering, 15, pp. 183-186.

Ai, Xing, Huang, Chuanzhen, Liu, Hanlian, Sun, Jing, & Wang, Jun (2004) Simulation Design for the Composition of Zirconia Composite Ceramic Tool. Journal of Materials Engineering and Performance, 13(2), pp. 167-171.

Akintoye, Akintola S. & Skitmore, Martin (1993) Macro models of UK construction contract prices. Civil Engineering Systems, 10(4), pp. 279-299.

407

Akintoye, Akintola S. & Skitmore, Martin (1994) Models of UK private sector quarterly construction demand. Construction Management and Economics, 12(1), pp. 3-13.

988

Akintoye, Akintola S. & Skitmore, Martin (1991) Profitability of UK construction contractors. Construction Management and Economics, 9(4), pp. 311-325.

1,067

Akintoye, Akintola S. & Skitmore, Martin (1994) A comparative analysis of three macro price forecasting models. Construction Management and Economics, 12(3), pp. 257-270.

534

Al-Ani, Ahmed & Deriche, Mohamed (2002) A New Technique for Combining Multiple Classifiers using the Dempster-Shafer Theory of Evidence. Journal of Artificial Intelligence Research, 17, pp. 333-361.

Al-Araji, Saleh, Boashash, Boualem, Hassan-Ali, Mudhafar, & Hussain, Zahir (2001) A Time-Delay Digital Tanlock Loop. IEEE Transactions on Signal Processing, pp. 1808-1814.

Al-Kharashi, Adel & Skitmore, Martin (2009) Causes of delays in Saudi Arabian public sector construction projects. Construction Management and Economics, 27(1), pp. 3-23.

2,717

Al-Shiekh Khalil, Wael, Duval (Rigby), Portia, Kokot, Serge, & Shanableh, Abdullah (2005) Selection of Hydrothermal Pre-treatment Conditions of Waste Sludge Destruction using Multicriteria Decision Making. Journal of Environmental Management, 75(1), pp. 53-64.

Al-Shiekh Khalil, Wael, Goonetilleke, Ashantha, Kokot, Serge, & Carroll, Steven P. (2004) Use of chemometrics methods and multicriteria decision-making for site selection for sustainable on-site sewage effluent disposal. Analytica Chimica Acta, 506(1), pp. 41-56.

892

Al-Shiekh Khalil, Wael, Jomaa, Samer, Shanableh, Abdulla, & Trebilco, Brendan (2003) Hydrothermal Decomposition and Oxidation of the Organic Component of Municipal and Industrial Waste Products. Advances in Environmental Research, 7, pp. 647-653.

Albaloushi, Helal & Skitmore, Martin (2008) Supply chain management in the UAE construction industry. International Journal of Construction Management, 8(1), pp. 53-71.

831

Albermani, Faris, Kitipornchai, S, & Mahendran, Mahen (2004) Upgrading of Transmission Towers using a Diaphragm Bracing System. Engineering Structures, 26, pp. 735-744.

Aldabbagh, Majid, Ledwich, Gerard, Muretic, Steven, O'Shea, Peter, & Palmer, Edward (2004) Modal Damping Factor Estimation for Power Systems in Normal Operation. World Scientific and Engineering Academy and Society Transactions on Systems, 3(9), pp. 2852-2855.

Alireza, Nami, Zare, Firuz, Ghosh, Arindam, & Blaabjerg, Frede (2009) Hybrid cascade converter topology with series connected symmetrical and asymmetrical diode-clamped H-Bridge cells. IEEE Transactions on Power Electronics, 24(12), p. 1.

677

Alizadeh, Shahab (2008) Performance of a solar liquid desiccant air conditioner - An experimental and theoretical approach. Solar Energy, 82(6), pp. 563-572.

Alizadeh, Shahab (2008) A feasibility study of using solar liquid-desiccant air conditioner in Queensland, Australia. Journal of Solar Energy Engineering, 130(2), 021005-1-021005-9.

Alkhesho, I, Duley, W, Hu, A, & Zhou, Hao (2006) Cryogenic Graphitization of Submicrometer Grains Embedded in Nanostructured Tetrahedral Amorphous Carbon Films. Journal of Applied Physics, 100, 084319-084319.

Alkhesho, I, Duley, W, Hu, Anming, Lu, Q, & Rybachuk, Maksym (2008) Nanostructure and sp1/sp2 clustering in tetrahedral amorphous carbon thin films grown by femtosecond laser deposition. Journal of Laser Applications, 20(1), pp. 37-42.

Allison, Janelle (2001) Evaluating the Role of the Sunshine Coast University (USC) in the Regional Economy. Local Economy, pp. 123-141.

Altmann, Joshua & Mathew, Joseph (2001) Multiple Band-Pass Autoregressive Demodulation for Rolling-Element Bearing Fault Diagnosis. Mechanical Systems and Signal Processing, pp. 963-977.

Alwi, Sugiharto, Keith, Hampson, & Sherif, Mohamed (2001) Effect of quality supervision on rework in the Indonesian context. Asia Pacific Building and Construction Management Journal, 6, pp. 2-6.

844

Amor, Robert, Betts, Martin, Coetzee, Gustav, & Sexton, Martin (2002) Information Technology for Construction: Recent Work and Future Directions. Journal of Information Technology in Construction, 7(16), pp. 245-258.

2,045

An, Shaofeng, Gao , Yan, Ling, Junqi, Wei, Xi, & Xiao, Yin (2012) Calcium ions promote osteogenic differentiation and mineralization of human dental pulp cells : implication for pulp capping materials. Journal of Materials Science : Materials in Medicine, 23(3), pp. 789-795.

An, Shaofeng, Ling , Junqi, Gao, Yan, & Xiao, Yin (2012) Effects of varied ionic calcium and phosphate on the proliferation, osteogenic differentiation and mineralization of human periodontal ligament cells in vitro. Journal of Periodontal Research, 47(3), pp. 374-382.

Anandan, S., Latha, S., Murugesan, S., Madhavan, J., Achari, Muthuraaman Bhagavathi, & Maruthamuthu, P. (2005) Synthesis, characterization and fabrication of solar cells making use of [Ru(dcbpy)(tptz)X]X (where X = Cl, SCN, CN) complexes. Solar Energy, 79(5), pp. 440-448.

Anandan, S., Pitchumani, S., Achari, Muthuraaman Bhagavathi, & Maruthamuthu, P. (2006) Heteropolyacid-impregnated PVDF as a solid polymer electrolyte for dye-sensitized solar cells. Solar Energy Materials and Solar Cells, 90(12), pp. 1715-1720.

Anapayan, Tharmarajah, Mahendran, Mahen, & Mahaarachchi, Dhammika (2010) Lateral distortional buckling tests of a new hollow flange channel beam. Thin-Walled Structures, 49(1), pp. 13-25.

Anastasia, Njo, Yakobus, Sutoto, & Susilawati, Connie (2001) Analysis of invesment decision on golf course and citraraya residential development. Jurnal Manajemen dan Kewirausahaan, 3(1), pp. 14-33.

Anthonysamy, A., Balasubramanian, S., Achari, Muthuraaman Bhagavathi, & Maruthamuthu, P. (2007) 4'-functionalized 2,2': 6',2" terpyridine ruthenium (II) complex : a nanocrystalline TiO2 based solar cell sensitizer. Nanotechnology, 18(9).

Armitage, Lynne & Skitmore, Martin (2003) Property market analysis in the valuation process: A survey of Australian practice. Pacific Rim Property Research Journal, 9(4), pp. 330-347.

1,052

Armstrong, Helen, Gusheh, Maryam, Hanna, Bronwyn, Stewart, Susan, Thompson, Susan, & Van Der Plaat, Deborah (2003) Navigating the Sea of Diversity - Multicultural Place-Making in Sydney. International Journal of Diversity in Organisations, Communities and Nations, 3, pp. 233-246.

Armstrong, Helen B. (2004) Making the unfamiliar familiar : research journeys towards understanding migration and place. Landscape Research, 29(3), pp. 237-260.

Arrillaga, J., Liu, Y.H., Perera, Lasantha B., & Watson, N.R. (2006) A Current Reinjection Scheme That Adds Self-Commutation and Pulse Multiplication to the Thyristor Converter. IEEE Transactions on Power Delivery, 21(3), pp. 1593-1599.

225

Ashebo, Demeke B., Chan, Tommy H.T., & Yu, Ling (2007) Evaluation of dynamic loads on a skew box girder continuous bridge - Part I : Field test and modal analysis. Engineering Structures, 29(6), pp. 1052-1063.

Ashebo, Demeke B., Chan, Tommy H.T., & Yu, Ling (2007) Evaluation of dynamic loads on a skew box girder continuous bridge - Part II: Parametric study and dynamic load factor. Engineering Structures, 29(6), pp. 1064-1073.

Athari N., Hamidreza, Golabchi, Mahmood, & Saghatforoush, Ehsan (2011) Development of new evaluation methods for qualitative alternatives, using fuzzy calculations. European Journal of Scientific Research, 51(3), pp. 305-314.

Athaudage, Chandranath R. N. & Jayalath, Dhammika (2004) Delay-spread estimation using cyclic-prefix in wireless OFDM systems. IEE Proceedings Communications, 151(6), pp. 559-566.

1,278

Athaudage, Chandranath R. N. & Jayalath, Dhammika (2004) Enhanced MMSE channel estimation using timing error statistics for wireless OFDM systems. IEEE Transactions on Broadcasting, 50(4), pp. 369-376.

329

Athukorala, P.P.A., Sri Navarathne Sakalashilpathi, Prasad, Wilson, Clevo, Miller, Evonne, Sahama, Tony, Grace, Peter, et al. (2010) Forecasting population changes and service requirements in the regions: A study of two regional councils in Queensland, Australia. Economic Analysis and Policy, 40(3), pp. 327-349.

Atkin, Brian & Skitmore, Martin (2008) Editorial : stakeholder management in construction. Construction Management and Economics, 26(6), pp. 549-552.

652

Austin, Paul, Butler, Dean, Nasir, Azhar, & Thambiratnam, David (2002) Dynamics of Axisymmetric Hyperbolic Shell Structures. Thin Walled Structures, 40, pp. 665-690.

Auti, Atul & Skitmore, Martin (2008) Construction project management in India. International Journal of Construction Management, 8(2), pp. 65-77.

1,224

Awad, Ziad K., Aravinthan, Thiru, Zhuge, Yan, & Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33, pp. 534-544.

704

Ayodele, Olofinjana, Yarlagadda, Prasad K., & Oloyede, Adekunle (2001) Microwave processing of adhesive joints using a temperature controlled feedback system. International Journal of Machine Tools and Manufacture, 41(2), pp. 209-225.

Ayoko, Godwin, Gilbert, Dale, Lim, Mckenzie, & Olofinjana, Ayodele (2005) Comparative Assessment of Australian Fly Ash and Conventional Concrete Bricks. Journal of Chemcial Technology and Biotechnology, 80(3), pp. 259-267.

Azemi, Ghasem, Boashash, Boualem, & Senadji, Bouchra (2004) Mobile Unit Velocity Estimation Based on the Instantaneous Frequency of the Received Signal. IEEE Transactions on Vehicular Technology, 53(3), pp. 716-724.

Azemi, Ghasem, Boashash, Boualem, & Senadji, Bouchra (2004) Ricean K-Factor Estimation in Modil Communication Systems. IEEE Communications Letters, 8(10), pp. 617-619.

Bachman, William, Fomunung, Ignatius, Guensler, Randall, & Washington, Simon (2000) Validation of the MEASURE automobile emissions model : a statistical analysis. Journal of Transportation and Statistics, 3(2), pp. 65-84.

Bagg, Shally, Green, Janice, Nathan, Rory, & Rahman, Ataur (2002) Development of an Objective Procedure for Identifying Regions of Low Flow Homogeneity for the Specification of Environmental Flows. Australian Journal of Water Resources, 6(1), pp. 53-60.

Bai, Ruixiang, Chen, Bo, Yan, Cheng, Ye, Lin, Li, Zecheng, & Chen, Haoran (2007) Numerical investigation of post buckling strength and failure modes in advanced grid stiffened structure under thermal-mechanical loads. Key Engineering Materials, 334-335, pp. 613-616.

Bai, Ruixiang, Chen, Haoran, Wang, Qi, & Yan, Cheng (2008) Shape control in composite laminates using piezoelectric actuators considering thermal deformation. Advanced Materials Research, 32, pp. 125-130.

256

Bai, Ruixiang, Jiang, Hao, & Yan, Cheng (2008) Nonlinear analysis of a Ball Grid Array package under thermal cycles. Advanced Materials Research, 32, pp. 57-60.

155

Bai, Yun, Ho, Tin Kin, & Mao, Baohua (2011) Train control to reduce delays upon service disturbances at railway junctions. Journal of Transportation Systems Engineering and Information Technology, 11(5), pp. 114-122.

Bai, Zhengdong, Feng, Yanming, & Zheng, Yi (2005) Grid Residual Tropospheric Corrections for Improved Differential GPS Positioning over the Victoria GPS Network (GPSnet). Journal of Global Positioning Systems, 4(1-2), pp. 284-290.

Bailey, David, Goonetilleke, Ashantha, & Campbell, Duncan A. (2003) A new fuzzy multi-criteria evaluation method for group site selection in GIS. Journal of Multi-Criteria Decision Analysis, 12(6), pp. 337-347.

513

Baishen, Zhou, Donghang, Li, Feng, Yanming, Jingjun, Guo, Pinggen, Zhou, & Zhigang, Ding (2005) A Demonstrative GPS-aided Automatic Landslide Monitoring System in Sichuan Province. Journal of Global Positioning Systems, 4(1-2), pp. 184-191.

Baker, Brendan, Martin, Terry, Sridharan, Sridha, & Wong, Eddie (2006) A Syllable-Scale Framework for Language Identification. Computer Speech & Language, 20(2-3), pp. 276-302.

Baker, Douglas C. (2002) Mining in Northern British Columbia. Western Geography, 12(2002), pp. 1-20.

Baker, Douglas C. & Freestone, Robert (2009) Listen and learn. Global Airport Cities, 2(4), pp. 8-10.

Baker, Douglas C. & McLelland, James N. (2003) Evaluating the Effectiveness of British Columbia's Environmental Assessment for First Nations' Participation in Mining Development. Environmental Impact Assessment Review, 23(5), pp. 581-603.

Baker, Douglas C., Sipe, Neil G., & Gleeson, Brendan J. (2006) Performance-based planning: Perspectives from the United States, Australia, and New Zealand. Journal of Planning Education and Research, 25(4), pp. 396-409.

Baker, Douglas C., Slanz, Christine, & Summerville, Tracey (2001) An Evolving Policy Community in Action: The Case of Construction Aggregate Policy in Ontario. Canadian Public Administration, 44(4), pp. 463-483.

Baker, Douglas Charles, Sipe, Neil, & Wypych, Stan (2005) Performance-based planning in Queensland. Australian Planner, 42(3), pp. 26-31.

Bakti, Erman Surya, Abdul Majid, Muhd Zaimi Bin, Zin, Zin, Rosli Mohamad, & Trigunarsyah, Bambang (2011) Constructability improvement in sea water intake structure. Engineering, Construction and Architectural Management, 18(6). (In Press)

343

Baldwin, Andrew, Li, Heng, Huang, Ting, Kong, , C.W., Guo, H.L., Chan, Neo, et al. (2009) Supporting pre-tender construction planning with virtual prototyping. Engineering, Construction and Architectural Management, 16(2), pp. 150-161.

Balogh, Zsolt, Cass, Danny, Civil, Ian, Harris, Ian, Kossmann, Thomas, Leibman, Steve, et al. (2008) Acute mangement of hemodynamically unstable pelvic trauma patients: time for a change? Multicenter review of recent practice. World Journal of Surgery, 32(8), pp. 1874-1882.

Bandula-Heva, T. & Dhanasekar, M. (2011) Determination of stress-strain characteristics of railhead steel using image analysis. World Academy of Science, Engineering and Technology, 60, pp. 1884-1888.

Banejad, Mahdi & Ledwich, Gerard F. (2005) Quantification of damping contribution from loads. IEEE Proceedings - Generation, Transmission & Distribution, 152(3), pp. 429-434.

Barkat, Braham & Boashash, Boualem (2001) A High-Resolution Quadratic Time-Frequency Distribution for Multicomponent Signals Analysis. IEEE Transactions on Signal Processing, pp. 2232-2238.

Barker, Timothy, Burkett, Brendan, & Smeathers, James (2001) Optimising the Trans-femoral Prosthetic Alignment for Running, by Lowering the Knee Joint. Prosthetics and Orthotics International, pp. 210-219.

Barker, Timothy, Burkett, Brendan, & Smeathers, James (2003) Walking and Running Inter-Limb Asymmetry for Paralympic Trans-Femoral Amputees, a Biomechanical Analysis. Prosthetics and Orthotics International, 27(1), pp. 36-47.

Barker, Timothy, Chetham, Scott, & Stafford, Wayne (2002) Neural Networks in Cardiac Electrophysiological Signal Classification. Australasian Physical & Engineering Sciences in Medicine, 25(3), pp. 124-131.

Barker, Timothy & Dillon, Michael (2006) Can Partial Foot Prostheses Effectively Restore Foot Length? Prosthetics and Orthotics International, 30(1), pp. 17-23.

Barker, Timothy & Young, Joseph A. (1997) Design of a Web interface for anatomical images. Australasian Physical and Engineering Science in Medicine, 20(1), pp. 33-38.

Barnett, Adrian G., de Looper, Michael, & Fraser, John (2008) The seasonality in heart failure deaths and total cardiovascular deaths in Australia. Australian and New Zealand Journal of Public Health, 32(5), 408 -413.

209

Bartel, Michael D., Ishii, Mamoru, Masukawa, Takuyki, Mi, Ye, & Situ, Rong (2001) Interfacial area measurements in subcooled flow boiling. Nuclear Engineering and Design, 210(1-3), pp. 135-155.

Bartold, P. Mark, Xiao, Yin, Lyngstaadas, S. Petter, Paine, Michael L., & Snead, Malcolm L. (2006) Principles and applications of cell delivery systems for periodontal regeneration. Periodontology 2000, 41(1), pp. 123-135.

441

Baum, Scott, Gellecum, Yolanda, Han, Jung, & Haynes, Michele (2006) Advantage and Disadvantage across Australia's Extended Metropolitan Regions: A Typology of Socioeconomic Outcomes. Urban Studies: an international journal for research in urban and regional studies, 43(9), pp. 1549-1579.

Baum, Scott, Gellecum, Yolanda, & Yigitcanlar, Tan (2004) Wired communities in the city: Sydney, Australia. Geographical Research, 42(2), pp. 175-192.

Baum, Scott, Kendall, Elizabeth, Muenchberger, Heidi, Gudes, Ori, & Yigitcanlar, Tan (2010) Geographical information systems : an effective planning and decision-making platform for community health coalitions in Australia. Health Information Management Journal, 39(3), pp. 28-33.

Baum, Scott, O'Connor, Kevin, & Yigitcanlar, Tan (2009) The implications of creative industries for regional outcomes. International Journal of Foresight and Innovation Policy, 5(1/2/3), p. 44.

Baum, Scott, Yigitcanlar, Tan, Mahizhnan, Arun, & Andiappan, Narayanan (2007) Singapore Government Online : A Consideration of E-Government Outcomes. Journal of E-Government, 3(4), pp. 65-84.

496

Bay, Achmad F. & Skitmore, Martin (2006) Project management maturity: some results from Indonesia. Journal of Building and Construction Management, 10, pp. 1-5.

2,410

Bay, Achmad Fuad, Skitmore, Martin, & Susilawati, Connie (2005) Maturity Level of Project Management: a survey conducted in several places in Indonesia (Tingkat Kematangan Manajemen Proyek: survei di beberapa tempat di Indonesia). Dimensi Teknik Sipil: Jurnal Keilmuan dan Penerapan Teknik Sipil, 7(2), pp. 81-89.

3,121

Bayissa, Wirtu, Haritos, Nicholas, & Sofi, Massoud (2011) Comparative study of broadband damage localization methods applied to test data. Ocean Engineering, 38(2 - 3), pp. 329-340.

Beal, Cara, Gardner, Ted, Ahmed, Warish, Walton, Chris, & Hamlyn-Harris, David (2008) Urine-separation and reuse trials. Water : journal of the Australian Water Association, 35(1), pp. 66-69.

Beghdadi, Azeddine, Mesbah, Mostefa, & Monteil, Jerome (2003) Fast Incremental Approach for Accurate Measurement of the Displacement Field. Image and Vision Computing, 21(2003), pp. 383-399.

Begum, S., Rasul, M.G., Brown, R.J., Subaschandar, N., & Thomas, P. (2011) An experimental and computational investigation of performance of Green Gully for reusing stormwater. Journal of Water Resuse and Desalination, 1(2), pp. 99-112.

Begum, Sharmina, Rasul, Mohammad G., & Brown, Richard J. (2008) A comparative review of stormwater treatment and reuse techniques with a new approach: Green Gully. WSEAS Transactions on environment and development, 4(11), pp. 1002-1013.

568

Beldiman, Manuela, Crawford, Ross, Oloyede, Adekunle, & Xiao, Yin (2008) Call response in mixtures of surfactant-culture medium - towards a systemic approach to cell-based treatments for focal osteoarthritis. Biosystems, 94, pp. 209-214.

Bell, Cameron G., Weinrauch, Patrick C., Crawford, Ross W., & Pearcy, Mark J. (2007) Thermomechanical investigation of the cortical bone analogue in third-generation Sawbones femurs. Proceedings of the I MECH E Part H Journal of Engineering in Medicine, 221(2), pp. 213-217.

Bell, Cameron G., Weinrauch, Patrick C., Pearcy, Mark J., & Crawford, Ross W. (2007) In vitro analysis of Exeter stem torsional stability. Journal of Arthroplasty, 22(7), pp. 1024-1030.

213

Bell, John, Chen, Zhuping, & Olofinjana, Ayodele (2001) Synthesis of Amorphous Carbon Nitride using Reactive Ion Beam Sputtering Deposition with Grazing Bombardment. Diamond and Related Materials, pp. 2184-2189.

Bell, John, Chen, Zhuping, & Olofinjana, Ayodele (2002) Ultra-high Surface Hardness in Nitrogen Ion Implanted Low Alloy Steel. Materials Letters, 53, pp. 385-391.

Bell, John, Chen, Zhuping, & Olofinjana, Ayodele (2001) XPS and Micro-Mechanical Characterisation of Nitrogen Ion Implanted Low Alloy Steel. Science in China Series A, pp. 354-361.

Bell, John, Clegg, Richard, Paterson, Gregory, & Wielunski, Leszek (2004) Production of Si+ and C1+ Ion Beams from a Freeman Type Ion Source Using Low Toxicity and Non-Corrosive Vapours as Source Gas. Nuclear Instruments and Methods in Physics Research. Section B., 215, pp. 262-267.

Bell, John, Colwell, John, Wentrup-Byrne, Edeline, & Wielunski, Leszek (2003) A Study of the Chemical and Physical Effects of Ion Implantation of Micro-Porous and Nonporous PTFE. Surface & Coatings Technology, 168, pp. 216-222.

Bell, John, Fredericks, Peter, Kiriakos (Izake), Emad, Paulmier, Thierry, & Runge, Claire (2005) A New Atmospheric Pressure Plasma Deposition Process for Carbon and Titanium Thin Films Fabrication. Materials Forum, 29, pp. 71-76.

Bell, John, Giulianini, Michele, Goh, Roland, Motta, Nunzio, & Waclawik, Eric (2008) Polymer-carbon nanotube composites: basic science and applications. Materials Forum (CD-ROM), 32, pp. 144-152.

Bell, John, Guan, Lisa, & Yang, Jay (2007) Cross-correlations between weather variables in Australia. Building and Environment, 42(3), pp. 1054-1070.

Bell, John, Koplick, Andrew, & Skryabin, Igor (2001) Large Area Electrochromic Films - Preparation and Performance. Solar Energy Materials and Solar Cells, pp. 239-247.

Bell, John & Matthews, Jeremy (2001) Temperature Dependence of Kinetic Behaviour of Sol-Gel Deposited Electrochromics. Solar Energy Materials and Solar Cells, pp. 249-263.

Bell, John, Matthews, Jeremy, & Skryabin, Igor (2001) Simulation of Electrochromic Switching Voltages at Elevated Temperatures. Electrochimica Acta, pp. 1957-1961.

Bell, John, Phillipp, F, Schroder, H, & Zhou, Hao (2005) Influence of Domain Boundaries on Polarity of GaN Grown on Sapphire. Applied Surface Science, 252(2), pp. 483-487.

Bell, John & Rybachuk, Maksym (2006) The Observation of sp(2) Fraction Disorder Using Dual Wavelength Raman Spectroscopy in a-C:H Films Fabricated Using an Open Inductively Coupled Plasma Reactor. Diamond and Related Materials, 15(4-8), pp. 977-981.

Bellamy, Nicholas, Wilson, Cecilia, Hendrikz, Joan, Whitehouse, Sarah L., Patel, Bipin, Dennison, Simon, et al. (2011) Osteoarthritis Index delivered by mobile phone (m-WOMAC) is valid, reliable, and responsive. Journal of Clinical Epidemiology, 64(2), pp. 182-190.

231

Bellapart, Judith, Chan, Gregory, Tzeng, Yu-Chieh, Ainslie, Philip, Barnett, Adrian, Dunster, Kimble, et al. (2011) The effect of Ventricular Assist Devices on cerebral autoregulation: A preliminary study. BMC Anesthesiology, pp. 1-8.

Bellapart, Judith, Chan, Gregory, Tzeng, Yu-Chieh, Ainslie, Philip, Dunster, Kimble, Barnett, Adrian, et al. (2011) The effect of ventricular assist devices on cerebral blood flow and blood pressure fractality. Physiological Measurement, 32(9), pp. 1361-1372.

Benders, K., Malda, J., Saris, D., Dhert, W., Steck, R., Hutmacher, D., et al. (2010) Formalin fixation affects equilibrium partitioning of an ionic contrast agent-microcomputed tomography (EPIC-[mu]CT) imaging of osteochondral samples. Osteoarthritis and Cartilage, 18(12), pp. 1586-1591.

Bennamoun, Mohammed, Bodnarova, Adriana, & Latham, Shane (2002) Optimal Gabor Filters for Textile Flaw Detection. Pattern Recognition, 35(12), pp. 2973-2991.

Bennamoun, Mohammed & Fookes, Clinton (2003) Rigid Medical Image Registration and its Association with Mutual Information. International Journal of Pattern Recognition and Artificial Intelligence, 17(7), pp. 1167-1206.

Berbezier, Isabelle, Ronda, Antoine, Portavoce, Alain, & Motta, Nunzio (2003) Ge Dots Self-Assembling: Surfactant Mediated Growth of Ge on Sige (118) Stress-Induced Kinetic Instabilities. Applied Physics Letters, 83(23), pp. 4833-4835.

138

Bernardi, Marco, Giulianini, Michele, & Grossman, Jeffery (2010) Self-assembly and its impact on interfacial charge transfer in carbon nanotube/P3HT solar cells. ACS Nano, 4(11), pp. 6599-6606.

Bernardi, Marco, Sgarlata, Anna, Fanfoni, Massimo, Balzarotti, Adalberto, & Motta, Nunzio (2008) A study of the pair distribution function of self-organized Ge quantum dots. Applied Physics Letters, 93(3), 031917.

Bernardi, Marco, Sgarlata, Anna, Fanfoni, Massimo, Persichetti, Luca, Motta, Nunzio, & Balzarotti, Adalberto (2009) Self-assembly of Ge quantum dots on silicon : an example of controlled nanomanufacturing. Superlattices and Microstructures, 46(1-2), pp. 318-323.

190

Berndt, Christoph, Ganko, Anthony, Whitehouse, Sarah L., & Crawford, Ross W. (2008) Heterotopic Ossification Within an Arthroscopic Portal After Uneventful Partial Meniscectomy. The Knee, 15(5), pp. 416-418.

415

Berris, Rebecca & Miller, Evonne (2011) How design of the physical environment impacts early learning : educators and parents perspectives. Australasian Journal of Early Childhood, 36(4).

358

Bershad, Neil, Celka, Patrick, & McLaughlin, Stephen (2001) Analysis of Stochastic Gradient Identification of Wiener-Hammerstein Systems for Nonlinearities with Hermite Polynomial Expansions. IEEE Transactions on Signal Processing, pp. 1060-1072.

Bershad, Neil, Celka, Patrick, & Vesin, Jean-Marc (2001) Stochastic Gradient Identification of Polynomial Wiener Systems: Analysis and Application. IEEE Transactions on Signal Processing, pp. 301-313.

Berthelsen, Donna, Boulton-Lewis, Gillian, Brownlee, Joanne, Dunbar, Stephanie, & McGahey, Pam (2008) Investigating epistemological beliefs in vocational education for child care workers: New ways of thinking about learning and training. Australian Educational Researcher, 35(3), pp. 135-154.

Beutel, Jason, Perera, Nimal, & Thambiratnam, David (2002) Cyclic Behaviour of Concrete Filled Steel Tubular Column to Steel Beam Connections. Engineering Structures, 24, pp. 29-38.

Bevrani, Hassan (1998) Application of Kharitonov's Theorem and its Results to Load Frequency Control. Iranian Journal of Electrical Science and Technology (BARGH), pp. 82-95.

Bevrani, Hassan (1998) Tracking in dispatching centers using robust controller. Technical Journal of Electric Power Industry (San'at-e-Barg, Iran), pp. 36-39.

Bevrani, Hassan, Ghosh, Arindam, & Ledwich, Gerard (2010) Renewable energy sources and frequency regulation : survey and new perspectives. I.E.T. Renewable Power Generation, 4(5), pp. 438-457.

Bevrani, Hassan & Hiyama, Takashi (2007) Multiobjective PI/PID Control Design Using an Iterative Linear Matrix Inequalities Algorithm. International Journal of Control, Automation, and Systems, 5(2), pp. 117-127.

Bevrani, Hassan & Hiyama, Takashi (2008) On Load-Frequency Regulation with Time Delays: Design and Real Time Implementation. IEEE Transactions on Energy Conversion, In Press. (In Press)

Bevrani, Hassan & Hiyama, Takashi (2007) Robust coordinated AVR-PSS design using H∞ static output feedback control. IEEJ Transactions on Power and Energy, 127(1), pp. 70-76.

Bevrani, Hassan & Hiyama, Takashi (2008) Robust decentralized PI based LFC design for time-delay power systems. Energy Conversion & Management, 49(2), pp. 193-204.

Bevrani, Hassan & Hiyama, Takashi (2007) Robust load-frequency regulation: a real-time laboratory experiment. Optimal Control Applications and Methods, 28(6), pp. 419-433.

Bevrani, Hassan & Hiyama, Takashi (2005) A robust solution for PI-based LFC problem with communication delays. IEEJ Transactions on Power and Energy, 25(12), pp. 1188-1193.

Bevrani, Hassan, Hiyama, Takashi, & Mitani, Yasunori (2008) Power system dynamic stability and voltage regulation enhancement using an optimal gain vector. Control Engineering Practice, 16(9), pp. 1109-1119.

Bevrani, Hassan, Hiyama, Takashi, Mitani, Yasunori, & Tsuji, Kiichiro (2007) Automatic generation control: A decentralized robust approach. Intelligent Automation and Soft Computing, 13(3), pp. 273-287.

Bevrani, Hassan, Hiyama, Takashi, Mitani, Yasunori, Tsuji, Kiichiro, & Teshnehlab, Mohammad (2006) Load-frequency regulation under a bilateral LFC scheme using flexible neural networks. Engineering Intelligent Systems, 14(2), pp. 109-117.

858

Bevrani, Hassan, Ise, Toshifumi, Mitani, Yasunori, & Tsuji, Kiichiro (2004) A robust approach to controller design for DC-DC quasi-resonant converters. IEEJ Transactions on Industry Applications, 124(5), pp. 91-100.

Bevrani, Hassan, Ledwich, Gerard, Ford, Jason J., & Dong, Zhao Yang (2009) On feasibility of regional frequency-based emergency control plans. Energy Conversion and Management, 50(7), pp. 1656-1663.

Bevrani, Hassan, Ledwich, Gerard F., Dong, Zhao Yang, & Ford, Jason J. (2009) Regional frequency response analysis under normal and emergency conditions. Electric Power Systems Research, 79, pp. 837-845.

Bevrani, Hassan, Ledwich, Gerard F., Ford, Jason J., & Dong, Z. Y. (2008) On power system frequency control in emergency conditions. Journal of Electrical Engineering & Technology, 3(4), pp. 499-508.

584

Bevrani, Hassan, Mitani, Yasunori, & Tsuji, Kiichiro (2004) LFC in a deregulated environment: Multi-objective control approach. IEEJ Transactions on Power and Energy, 124(12), pp. 1409-1416.

Bevrani, Hassan, Mitani, Yasunori, & Tsuji, Kiichiro (2004) On robust load-frequency regulation in a restructured power system. IEEJ Transactions on Power and Energy, 124(2), pp. 190-198.

Bevrani, Hassan, Mitani, Yasunori, & Tsuji, Kiichiro (2004) Robust AGC: Traditional structure versus restructured scheme. IEEJ Transactions on Power and Energy, 124(5), pp. 751-761.

Bevrani, Hassan, Mitani, Yasunori, & Tsuji, Kiichiro (2004) Robust decentralised load-frequency control using an iterative linear matrix inequalities algorithm. IEE Proceedings - Generation, Transmission and Distribution, 151(3), pp. 347-354.

1,064

Bevrani, Hassan, Mitani, Yasunori, & Tsuji, Kiichiro (2004) Robust decentralized AGC in a restructured power system. Energy Conversion and Management, 45(15-16), pp. 2297-2312.

Bevrani, Hassan, Mitani, Yasunori, & Tsuji, Kiichiro (2004) Sequential design of decentralized load frequency controllers using mu synthesis and analysis. Energy Conversion & Management, 45(6), pp. 865-881.

Bevrani, Hassan, Mitani, Yasunori, Tsuji, Kiichiro, & Bevrani, Hossein (2005) Bilateral based robust load frequency control. Energy Conversion and Management, 46(7-8), pp. 1129-1146.

Bevrani, Kaveh & Chung, Edward (2011) An examination of the microscopic simulation models to identify traffic safety indicators. International Journal of Intelligent Transportation Systems Research.

109

Bhagavathi Achari, Muthuraaman, Ganesan, S, Paul, B, Maruthamuthu, P, & Suthanthiraraj, S. (2011) Studies on isomeric effects of 2- and 4-Mercapto pyridine as dopants in polymer electrolyte in dye-sensitized solar cells. Electrochimica Acta, 56(15), pp. 5405-5409.

Bhagavathi Achari, Muthuraaman & Pichai, Maruthamuthu (2011) Formation of nanotubes in poly (vinylidene fluoride): Application as solid polymer electrolyte in DSC fabricated using carbon counter electrode. Electrochimica Acta, 56(22), pp. 7563-7568.

Bhagavathi Achari, Muthuraaman, Shanmugam, Thiyagarajan, Maruthamuthu, P, & Nasar, Sultan (2010) Dye-sensitized solar cell based on a blend of hyperbranched poly(aryl-ether-urethane) electrolyte with TiO2 nanoparticles. Journal of Macromolecular Science: Part A - Pure and Applied Chemistry, 47(9), pp. 965-970.

Bhakta, Gajadhar, Lee, Kong Heng, Magalhaes, Raquel, Gouk, Sok Siam, & Hutmacher, Dietmar W. (2008) Cryoreservation of alginate-fibrin beads involving bone marrow derived mesenchymal stromal cells by vitrification. Biomaterials, 30(3), pp. 336-343.

Bhaskar, Ashish, Chung, Edward, & Dumont, Andre-Gilles (2010) Analysis for the use of cumulative plots for travel time estimation on signalized network. International Journal of Intelligent Transportation Systems Research, 8(3), pp. 151-163.

Bhaskar, Ashish, Chung, Edward, & Kuwahara, Masao (2007) Development and implementation of the areawide Dynamic ROad traffic NoisE (DRONE) simulator. Transportation Research Part D: Transport and Environment, 12(5), pp. 371-378.

Bhaskar, Ashish, Chung, Edward, Kuwahara, Masao, de Mouzon, Olivier, & Dumont, André-Gilles (2007) Urban network travel time estimation from stop-line loop detector data and signal controller data. Urban Transport XIII : Urban Transport and the Environment in the 21st Century.

Bieler, F.H., Ott, C.E., Thompson, M.S., Seidel, R., Ahrens, S., Epari, Devakara R., et al. (2009) Biaxial cell stimulation : a mechanical validation. Journal of Biomechanics, 42(11), pp. 1692-1696.

Bigdan, Vladimir & O'Shea, Peter (2008) The Biggest Loser Competition. IEEE Transactions on Education, 51(1), pp. 123-130.

Biggs, Herbert C., Dinsdag, Don, Kirk, Philip J., & Cipolla, Dean (2010) Safety culture research, lead indicators, and the development of safety effectiveness indicators in the construction sector. International Journal of Technology, Knowledge and Society, 6(3), pp. 133-140.

223

Birkeland, Janis (2009) Design for eco-services. Part A - Environmental Services. BEDP Environment Design Guide.

Birkeland, Janis (2009) Design for eco-services. Part B - Building Services. BEDP Environment Design Guide.

Birkeland, Janis (2008) Positive development. Solar Progress, 27(4), pp. 25-27. (In Press)

Birtwhistle, David, Cash, Gregory, George, Graeme, Hunt, Susan, & Liu, Heping (2002) Spectroscopic Characterization of Lowe Molecular Weight Fluids from Silicone Elastomers. Journal of Macromolecular Science: Part A-Pure and Applied Chemistry, 39(9), pp. 1007-1024.

Birtwhistle, David, Cash, Gregory, George, Graeme, Liu, Heping, & Sovar, Robert (2006) Studies of The Diffusion of Low Molecular Weight Silicone Fluids on Polluted HV Silicone Insulators. I. Use of Diffuse Reflectance FTIR. IEEE Transactions of Dielectrics And Electrical Insulation, 13(4), pp. 877-884.

Birtwhistle, David, Lyall, Jim, & Oyegoke, Bolarin (2008) Condition assessment of XLPE cable insulation using short-time polarisation and depolarisation current measurements. IET Science, Measurement and Technology, 2(1), pp. 25-31.

Bishop-Hurley, Greg, Swain, Dave, Anderson, D. M, Sikka, Pavan, Crossman, Chris, & Corke, Peter (2007) Virtual fencing applications : Implementing and testing an automated cattle control system. Computers and Electronics in Agriculture, 56(1), pp. 14-22.

Blackburn, Octavia A., Coe, Benjamin J., Hahn, Valentine, Helliwell, Madeleine, Raftery, James, Ta, Yien T., et al. (2012) N-Aryl stilbazolium dyes as sensitizers for solar cells. Dyes and Pigments, 92(1), pp. 766-777.

101

Blackler, Alethea L., Popovic, Vesna, & Mahar, Douglas P. (2007) Empirical investigations into intuitive interaction: a summary. MMI-Interaktiv, 13, pp. 4-24.

360

Blackler, Alethea L., Popovic, Vesna, & Mahar, Douglas P. (2010) Investigating users’ intuitive interaction with complex artefacts. Applied Ergonomics, 41(1), pp. 72-92.

193

Blackler, Alethea L., Popovic, Vesna, & Mahar, Douglas P. (2003) The nature of intuitive use of products : an experimental approach. Design Studies, 24(6), pp. 491-506.

719

Blackler, Alethea Liane & Hurtienne, Jorn (2007) Towards a unified view of intuitive interaction : definitions, models and tools across the world. MMI-Interaktiv, 13(2007), pp. 36-54.

294

Blake, Andrea, Cradduck, Lucy M., Richardson, Kristy, & Eves, Chris (2010) Real property law: Its place in Australian undergraduate real estate programs. Journal of Real Estate Practice and Education, 13(2), pp. 141-158.

Blake, Andrea & Susilawati, Connie (2009) An evaluation of how well undergraduate property students are prepared for commencing their careers. Pacific Rim Property Research Journal, 15(2), pp. 204-225.

155

Blakey, Idriss, Goss, Benjamin G., & George, Graeme A. (2006) Chemiluminescence as a probe of polymer oxidation. Australian Journal of Chemistry, 59(8), pp. 485-498.

Blayse, Aletha M. & Manley, Karen (2004) Key influences on construction innovation. Construction Innovation, 4(3), pp. 143-154.

1,431

Blom, Ashley, Taylor, Adrian H., Whitehouse, Sarah L., Orr, Bill, & Smith, Evert J. (2002) A new sign of inappropriate lower back pain. Annals of the Royal College of Surgeons, 84(5), pp. 342-343.

Blom, Ashley W., Brown, J., Taylor, Adrian H., Pattison, Giles, Whitehouse, Sarah L., & Bannister, Gordon C. (2004) Infection after total knee arthroplasty: The Avon experience. Journal of Bone and Joint Surgery: British Volume, 86(B), pp. 688-691.

Blom, Ashley W., Pattison, Giles, Whitehouse, Sarah L., Taylor, Adrian H., & Bannister, Gordon C. (2006) Early death following primary total hip arthroplasty: 1,727 procedures with mechanical thrombo-prophylaxis. Acta Orthopaedica, 77(3), pp. 347-350.

318

Blom, Ashley W., Rogers, Mark, Taylor, Adrian H., Pattison, Giles, Whitehouse, Sarah, & Bannister, Gordon C. (2008) Dislocation following total hip replacement: the Avon Orthopaedic Centre Experience. Annals of The Royal College of Surgeons of England, 90(8), pp. 658-662.

Blom, Ashley W., Taylor, Adrian H., Pattison, Giles, Whitehouse, Sarah L., & Bannister, Gordon C. (2003) Infection after total hip arthroplasty. The Avon experience. Journal of Bone and Joint Surgery: British Volume, 85(7), pp. 956-959.

Boashash, B., Sridharan, Sridha, & Chandran, Vinod (1996) The development of a new signal processing program at the Queensland University of Technology. IEEE Transactions on Education, 39(2), pp. 186-191.

Boashash, Boualem, Celka, Patrick, & Colditz, Paul (2001) Preprocessing and Time-Frequency Analysis of Newborn EEG Seizures. IEEE Engineering in Medicine and Biology Magazine, pp. 30-38.

Boashash, Boualem, Deriche, Mohamed, & Kasaei, Shohreh (2002) A Novel Fingerprint Image Compression Technique using Wavelets Packets and Pyramid Lattice Vector Quantization. IEEE Transactions on Image Processing, 11(12), pp. 1365-1378.

Boashash, Boualem, Hassanpour, Hamid, & Mesbah, Mostefa (2004) Time-Frequency Based Newborn EEG Seizure Detection Using Low and High Frequency Signatures. Physiological Measurement, 25(4), pp. 935-944.

Boashash, Boualem & Hussain, Zahir (2002) Adaptive Instantaneous Frequency Estimation of Multicomponent FM Signals using Quadratic Time-Frequency Distributions. IEEE Transactions on Signal Processing, 50(8), pp. 1866-1876.

Boashash, Boualem & Hussain, Zahir (2002) Hilbert Transformer and Time Delay: Statistical Comparison in the Presence of Gaussion Noise. IEEE Transactions on Signal Processing, 50(3), pp. 501-508.

Boashash, Boualem & Hussain, Zahir (2002) The Time-delay Digital Tanlock Loop: Performance Analysis in Additive Gaussian Noise. Journal of the Franklin Institute, 339, pp. 43-60.

Boashash, Boualem & Mesbah, Mostefa (2004) Signal Enhancement by Time-Frequency Peak Filtering. IEEE Transactions on Signal Processing, 52(4), pp. 929-937.

Boashash, Boualem & Mesbah, Mostefa (2001) A Time-Frequency Approach for Newborn Seizure Detection. IEEE Engineering in Medicine and Biology Magazine, pp. 54-64.

Boashash, Boualem & O'Shea, Peter J. (1994) Polynomial Wigner-Ville distributions and their relationship to time-varying higher order spectra. IEEE Transactions on Signal Processing, 42(1), pp. 216-220.

755

Boashash, Boualem & O'Shea, Peter J. (1993) Use of the cross Wigner-Ville distribution for estimation of instantaneous frequency. IEEE Transactions on Signal Processing, 41(3), pp. 1439-1445.

1,015

Boashash, Boualem & O'Shea, Peter J. (1990) A methodology for detection and classification of some underwater acoustic signals using time-frequency analysis techniques. IEEE Transactions on Acoustics, Speech, and Signal Processing, 38(11), pp. 1829-1841.

710

Boashash, Boualem & Sucic, Victor (2003) Resolution Measure Criteria for the Objective Assessment of the Performance of Quadratic Time-Frequency Distributions. IEEE Transactions on Signal Processing, 51(5), pp. 1253-1263.

Bock, Nathalie, Woodruff, Maria A., Hutmacher, Dietmar W., & Dargaville, Tim R. (2011) Electrospraying a reproducible method for production of polymeric microspheres for biomedical applications. Polymers, 3(1), pp. 131-149.

151

Bodisco, Timothy A., Reeves, Robert W., Situ, Rong, & Brown, Richard J. (2011) Bayesian models for the determination of resonant frequencies in a DI diesel engine. Mechanical Systems and Signal Processing, 26, pp. 305-314.

100

Boles, Wageeh, Boyle, Justin, & Maeder, Anthony (2002) Image Enhancement for Electronic Visual Prostheses. Australasian Physical & Engineering Sciences in Medicine, 25(2), pp. 81-86.

Boles, Wageeh, Boyle, Justin, & Maeder, Anthony (2008) Region-of-interest processing for electronic visual prostheses. Journal of Electronic Imaging, 17(1), pp. 1-12.

Boles, Wageeh, Busch, Andrew, & Sridharan, Subramanian (2005) Texture for Script identification. IEEE Transcriptions on Pattern Analysis and Machine Intelligence, 27(11), pp. 1720-1731.

Boles, Wageeh W., Jolly, Lesley, Hadgraft, Roger, Howard, Prue, & Beck, Hilary (2010) Influences on student learning in engineering : some results from case studies fieldwork. Australasian Journal of Engineering Education, 16(2), pp. 149-165.

Boles, Wageeh W., Jolly, Lesley, Hadgraft, Roger, Howard, Prue, & Beck, Hilary (2010) Influences on student learning in engineering : some results from case study fieldwork. Australasian Journal of Engineering Education, 16(2), pp. 149-165.

Bolz, Katharina, Crawford, Ross W., Donnelly, Bill, Whitehouse, Sarah L., & Graves, Nicholas (2009) The cost-effectiveness of routine follow-up after primary total hip arthroplasty. The Journal of Arthroplasty, 25(2), pp. 191-196.

Bonchis, Adrian, Corke, Peter, & Rye, David (2002) Experimental evaluation of position control methods for hydraulic systems. IEEE Transactions on Control Systems Technology, 10(6), pp. 876-882.

297

Boora, Arash A., Zare, Firuz, & Ghosh, Arindam (2011) Multi-output buck-boost converter with enhanced dynamic response to load and input voltage changes. IET Power Electronics, 4(2), pp. 194-208.

1,585

Bostrom, Thor, Evans, John, Grondahl, Lisbeth, & Wei, Mai (2003) Synthesis and Characterization of Hydroxapatite, Fluoride-Substituted Hydroxyapatite and Fluorapatite. Journal of Materials Science: Materials in Medicine, 14, pp. 311-320.

Botsford, Gianni & Frazer, John H. (2008) In the beginning... Plan : The Art of Architecture and Design, p. 25.

Boulton-Lewis, Gillian, Marton, Ference, Lewis, David, & Wilss, Lynn (2004) A longitudinal study of learning for a group of Indigenous Australian university students : dissonant conceptions and strategies. Higher Education: The international journal of higher education and educational planning, 47(1), pp. 91-112.

416

Boulton-Lewis, Gillian M. (2004) Conceptions of teaching and learning at school and university : similarities, differences, relationships and contextual factors. European Journal of School Psychology, 2(1-2), pp. 19-38.

379

Boulton-Lewis, Gillian M. (2010) Education and learning for the elderly : why, how, what. Educational Gerontology, 36(3), pp. 213-228.

Boulton-Lewis, Gillian M., Brownlee, Joanne M., Berthelsen, Donna, & Dunbar, Stephanie (2008) Child care students' practical conceptions of learning. Studies in Continuing Education, 30(2), pp. 119-128.

Boulton-Lewis, Gillian M., Brownlee, Joanne M., Walker, Sue, Cobb-Moore, Charlotte, & Johansson, Eva (2011) Moral and social development: teachers’ knowledge of children’s learning and teaching strategies in the early years. Australasian Journal of Early Childhood, 36(4), pp. 6-15.

Boulton-Lewis, Gillian M., Brownlee, Joanne M., Walker, Sue, Johansson, Eva, & Cobb-Moore, Charlotte (2011) Moral and social development : teachers’ knowledge of learning and teaching strategies in the early years. Australasian Journal of Early Childhood. (In Press)

121

Boulton-Lewis, Gillian M., Buys, Elinor Laurie R., & Tedman-Jones, Jan S. (2008) Learning among older adults with lifelong intellectual disabilities. Educational Gerontology: an international journal, 34(4), 282 -291.

Boulton-Lewis, Gillian M., Cooper, Thomas J., Atweh, Bill, Pillay, Hitendra K., Wilss, Lynn A., & Mutch, Susan (1997) Processing load and the use of concrete representations and strategies for solving linear equations. Journal of Mathematical Behavior, 16(4), pp. 379-397.

Boulton-Lewis, Gillian M., Lewis, David, & Wilss, Lynn A. (2003) Dissonance between conceptions of learning and ways of learning for Indigenous Australian university students. Studies in Higher Education, 28(1), pp. 79-89.

500

Boulton-Lewis, Gillian M. & Purdie, Nola M. (2003) The learning needs of older adults. Educational Gerontology, 29(2), pp. 129-149.

Boulton-Lewis, Gillian M., Smith, David J., McCrindle, Andrea R., Burnett, Paul, & Campbell, Karyl (2001) Secondary teachers’ conceptions of teaching and learning. Learning and Instruction, 11(1), pp. 35-51.

Boyd, Cameron, Enderle, Werner, & King, Jan (2005) Joint Australian Engineering (Micro) Satellite (JAESat) - A GNSS Technology Demonstration Mission. Journal of Global Positioning Systems, 4(1-2), pp. 277-283.

Boyd, Cameron, Enderle, Werner, & King, Jan (2006) Joint Australian Engineering Satellite (JAESat). Coordinates, 2(2), pp. 38-42.

Boyd, Terence (2006) Evaluating the Impact of Sustainability on Investment Property Performance. Pacific Rim Property Research Journal, 12(3), pp. 254-271.

Boyd, Terence (2003) Model Consistency and Data Specification in Property DCF Studies. Australian Property Journal, 37(8), pp. 553-559.

Boyd, Terence (2004) When the Baby Boomers Go, Real Change in the Property Industry will Begin. Australian Property Journal, 38(4), pp. 290-293.

Boyd, Terence & Irons, Janine (2002) Valuation Variance and Negligence: The Importance of Reasonable Care. Pacific Rim Property Research Journal, 8(2), pp. 107-126.

Boyle, Justin, Maeder, Anthony, Bell, John, John, Sabu, & Scott, Robin (2005) Medical device research. Expert Review of Medical Devices, 2(1), pp. 41-45.

Bozkurt, Ahmet, Deumens, Ronald, Scheffel, J., O'Dey, Dan mon, Weis, Joachim, Joosten, E.A. (Bert), et al. (2008) CatWalk gait analysis in assessment of functional recovery after sciatic nerve injury. Journal of Neuroscience Methods, 173(1), pp. 91-98.

Brcich, Ramon F., Iskander, D. Robert, & Zoubir, Abdelhak M. (2005) The stability test for symmetric alpha-stable distributions. IEEE Transactions on Signal Processing, 53(3), pp. 977-986.

500

Brell, Edward, Snook, Chris, & Van Erp, Gerard (2002) Train Crashworthiness and its Impact on Society. Australian Journal of Mechanical Engineering, ME25(2), pp. 103-112.

Brereton, Margot & Buur, Jacob (2008) New challenges for design participation in the era of ubiquitous computing. CoDesign, 4(2), pp. 101-113.

200

Breton, G, Osipowicz, T, Seng, H-L, Tok, E, Wielunski, Leszek, & Zhang, J (2002) High Resolution Channeling Contrast Microscopy and Channeling Analysis of SiGe Quantum Well Structures. Nuclear Instruments and Methods in Physics Research B, 190, pp. 345-350.

Brew, Christopher J., Simpson, Philip M., Whitehouse, Sarah L., Donnelly, Bill, Crawford, Ross W., & Hubble, Matthew J.W. (2011) Scaling digital radiographs for templating in total hip arthroplasty using conventional acetate templates independent of calibration markers. Journal of Arthroplasty, 27(4), pp. 643-647.

Bridge, Adrian & Tisdell, Clem (2006) The determinants of the vertical boundaries of the construction firm : response. Construction Management and Economics, 24(3), pp. 233-236.

Bridge, Adrian & Tisdell, Clem (2004) The determinants of the vertical boundaries of the construction firm. Construction Management and Economics, 22(8), pp. 807-825.

Brodie, Ian M. & Egodawatta, Prasanna (2011) Relationships between rainfall intensity, duration and suspended particle washoff from an urban road surface. Hydrology Research, 42(4), pp. 239-249.

Brott, Simone (2008) Close encounter, withdrawn effects. Journal of Architectural Education, 61(4), pp. 6-16.

Brott, Simone (2010) Deleuze and "The Intercessors". Log 18, pp. 135-151.

579

Brott, Simone (2011) Esprit Futur. Log (New York), pp. 84-96.

187

Brown, Brian, Evans, John, Luk, K, Mak, Arthur, & Wong, M (2002) Effect of using Prismatic Eye Lenses on the Posture of Patients with Adolescent Idiopathic Scoliosis Measured by 3-D Motion Analysis. Prosthetics and Orthotics International, 26, pp. 139-153.

Brown, Cameron, Crawford, Ross, & Oloyede, A. (2008) In search of a parameter to distinguish viable from non-viable articular cartilage: indentation and ultrasound studies. Advanced Materials Research, 32, pp. 223-228.

Brown, Cameron, Crawford, Ross, & Oloyede, A. (2009) An alternative mechanical parameter for assessing the viability of articular cartilage. Journal of Engineering Medicine : Proceedings of the Institution of Mechanical Engineers, 223(H1), pp. 53-62.

Brown, Cameron, Hughes, Stephen, Crawford, Ross, & Oloyede, A. (2008) Joint laminate degradation assessed by reflected ultrasound from the cartilage surface and osteochondral junction. Physics in Medicine and Biology, 53(15), pp. 4123-4135.

Brown, Cameron, Nguyen, Van, Moody, Hayley, Crawford, Ross, & Oloyede, A. (2009) Assessment of common hyperelastic constitutive equations for describing normal and osteoarthritic articular cartilage. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 223(6), pp. 643-652.

Brown, Cameron P., Bowden, Joshua, Rintoul, Llewellyn, Meder, Roger, Oloyede, Adekunle, & Crawford, Ross W. (2009) Diffuse reflectance near infrared spectroscopy can distinguish normal from enzymatically digested cartilage. Physics in Medicine and Biology, 54(18), pp. 5579-5594.

202

Brown, Cameron P., Crawford, Ross W., & Oloyede, Adekunle (2007) Indentation stiffness does not discriminate between normal and degraded articular cartilage. Clinical Biomechanics, 22(7), pp. 843-848.

152

Brown, Cameron P., Hughes, Stephen W., Crawford, Ross W., & Oloyede, Adekunle (2007) Ultrasound assessment of articular cartilage: Analysis of the frequency profile of reflected signals from naturally and artificially degraded samples. Connective Tissue Research, 48(6), pp. 277-285.

139

Brown, Cameron P., Moody, Hayley R., Crawford, Ross W., & Oloyede, Adekunle (2007) A novel approach to the development of benchmarking parameters for characterising cartilage health. Connective Tissue Research, 48(1), pp. 52-61.

151

Brown, David, Bunker, Jonathan M., & Naiker, Deva (2011) Brisbane floods : a traffic and transport perspective. AITPM Newsletter, 1103, pp. 10-11.

133

Brown, Kerry A., Waterhouse, Jennifer M., & Flynn, Christine (2003) Change management practices : is a hybrid model a better alternative for public sector agencies? International Journal of Public Sector Management, 16(3), pp. 230-241.

1,756

Brown, R.J. & Bilger, R.W. (1996) An experimental study of a reactive plume in grid turbulence. Journal of Fluid Mechanics, 312, pp. 373-407.

Brown, Richard J. & Bilger, Robert W. (1998) Experiments on a reacting plume—1. Conventional concentration statistics. Atmospheric Environment, 32(4), pp. 611-628.

Brown, Richard J. & Bilger, Robert W. (1998) Experiments on a reacting plume—2. Conditional concentration statistics. Atmospheric Environment, 32(4), pp. 629-646.

Brown, Richard J. & Sawford, Brian L. (2000) Probability Density Function Integrals And Small-Scale Mixing In Turbulent Plumes. Boundary-Layer Meteorology, 97(2), pp. 219-249.

Brown, Richard J. & Woodfield, Peter L. (2004) Prediction of short-range maximum NO2 concentrations using scalar PDFS. Atmospheric Environment, 38(9), pp. 1379-1386.

Brownlee, Joanne M., Syu, Jia-Jia, Mascadri, Julia, Cobb-Moore, Charlotte, Walker, Sue, Johansson, Eva, et al. (2012) Teachers’ and children’s personal epistemologies for moral education : Case studies in early years elementary education. Teaching and Teacher Education, 28(3), pp. 440-450.

162

Bruggemann, Troy S., Ford, Jason J., & Walker, Rodney A. (2010) Control of aircraft for inspection of linear infrastructure. IEEE Transactions on Control Systems Technology, 19(6), pp. 1397-1409.

152

Bruggemann, Troy S., Greer, Duncan G., & Walker, Rodney A. (2011) GPS fault detection with IMU and aircraft dynamics. IEEE Transactions on Aerospace and Electronic Systems, 47(1), pp. 305-316.

198

Bryant, Lyndall (2010) Australia's GFC hangover. Urban Developer, pp. 32-33.

Bryant, Lyndall (2011) Land buyers likely to foot reform costs. Courier Mail, July(22), p. 80.

Bryant, Lyndall (2008) Planning for survival. Urban Developer, pp. 22-23.

Bryant, Lyndall (2012) An assessment of development funding for new housing post GFC in Queensland, Australia. International Journal of Housing Markets and Analysis, 5(2), pp. 118-133.

311

Bryant, Lyndall & Eves, Chris (2011) Have sustainability declarations impacted home buyer patterns? REIQ Journal, pp. 48-51.

Buckingham, Lawrence I., Hogan, James M., Roe, Paul, Sumitomo, Jiro, & Towsey, Michael (2008) Comparative Studies Simplified in GPFlow. Computational Science – ICCS 2008, 5103, pp. 491-500.

Bucolo, Savatore, Cuttle, Leila, Hilder, Melanie, Kimble, Roy, Mill, Julie, Miller, Kate, et al. (2008) The efficacy of an augmented virtual reality system to alleviate pain in children undergoing burns dressing changes: A randomised controlled trial. Journal of the International Society of Burns Injuries, 34(6), pp. 803-808.

Bucolo, Savatore, Kimble, Roy, Miller, Kate, & Patterson, Emma (2008) The emergence of multimodal distraction as a paediatric pain management tool. Studies in Health Technology and Informatics, 132, pp. 287-292.

Budiawan, Dedi, Ma, tony, & Sidwell, Anthony (2001) The Significance of the Tendering Contract on the Opportunities for Clients to Encourage Contractor-Led Innovation. Construction Innovation: Information, Process, Management, pp. 107-116.

Budiwibowo, Agung, Trigunarsyah, Bambang, Abidin, Ismeth S, & Soeparto, Hari G (2009) Competitiveness of the Indonesian construction industry. Journal of Construction in Developing Countries, 14(1), pp. 51-68.

316

Buisson, David, Garrett, Tony, & Yap, Chee (2006) National Culture R&D and Marketing Integration Mechanisms in New Product Development: A Cross-Cultural Study Between Singapore and New Zealand. Industrial Marketing Management, 35(3), pp. 293-307.

Bunker, Jonathan M. (2008) AITPM national newsletter December 2008 president's report. AITPM National Newsletter, 0812, p. 2.

Bunker, Jonathan M. (2008) AITPM national newsletter November 2008 president's report. AITPM National Newsletter, 0811, p. 2.

Bunker, Jonathan M. (2008) AITPM national newsletter October 2008 president's report. AITPM National Newsletter, 0810, p. 2.

Bunker, Jonathan M. (2010) AITPM national newsletter President's report July 2010. AITPM National Newsletter, 0710, p. 2.

Bunker, Jonathan M. (2010) AITPM national newsletter President's report June 2010. AITPM National Newsletter, 0610, p. 2.

Bunker, Jonathan M. (2010) AITPM national newsletter President's report May 2010. AITPM National Newsletter, 0510, p. 2.

Bunker, Jonathan M. (2010) AITPM national newsletter president's report April 2010. AITPM National Newsletter, 0410, p. 2.

Bunker, Jonathan M. (2010) AITPM national newsletter president's report February 2010. AITPM National Newsletter, 0210, p. 2.

Bunker, Jonathan M. (2010) AITPM national newsletter president's report March 2010. AITPM National Newsletter, 0310, p. 2.

Bunker, Jonathan M. (2003) Moving multi-combination vehicles on Brisbane's urban arterial roads. Transport Futures Journal, December, pp. 17-18.

261

Bunker, Jonathan M. (2010) Queensland Government’s people’s question time : the challenges and opportunities of population growth in Queensland. AITPM National Newsletter, 0410, pp. 4-5.

Bunker, Jonathan M. (2007) Research project for managing skid resistance is on the road. BEELine Magazine.

Bunker, Jonathan M. (2010) Wild weather hampers Brisbane’s popular CityCat services. AITPM Newsletter, 1110, p. 15.

Bunker, Jonathan M. & Haldane, Mandy J. (2003) Establishing multi-combination vehicle trajectories under acceleration from rest. Road and Transport Research: a journal of Australian and New Zealand research and practice, 12(3), pp. 3-15.

611

Bunker, Jonathan M. & Parajuli, Ashis (2006) Examining lateral positions of cars and heavy vehicles on a two lane, two way motorway. Transport Engineering in Australia, 10(2), pp. 129-139.

Bunker, Jonathan M. & Troutbeck, Rodney J. (1995) Microscopic Modeling of Traffic Within Freeway Lanes. Transportation Research Record, pp. 19-25.

Bunker, Jonathan M. & Troutbeck, Rodney J. (2003) Prediction of minor stream delays at a limited priority freeway merge. Transportation Research Part B: Methodological, 37(8), pp. 719-735.

400

Bunker, Jonathan M. & Troutbeck, Rodney J. (1996) The probability of delay to minor stream drivers at a limited priority freeway merge. Road and Transport Research: a journal of Australian and New Zealand research and practice, 5(1), pp. 16-25.

Burks, Sandra, Crawford, Ross, Goldthwaite, Charles, Spotnitz, William, & Wang, Gwo-Jaw (2003) Fibrin Sealant Reduces Perioperative Blood Loss in Total Hip Replacement. Journal of Long-Term Effects in Medical Implants, 13(5), pp. 399-411.

Burns, David, Hay, Peter, & Steinberg, Theodore (2006) Review, Analysis, and Hazard Mitigation of the Life-Support Oxygen System on Royal Australian Air Force P-3 Orion Aircraft. Journal of ASTM International, 3(4), pp. 1-13.

Buskey, Gregg, Roberts, Jonathan, Corke, Peter, & Wyeth, Gordon (2004) Helicopter automation using a low-cost sensing system. Computing and Control Engineering, 15(2), pp. 8-9.

Butler, Darren E., Bove, V. Michael, & Sridharan, Sridha (2005) Real-Time Adaptive Foreground/Background Segmentation. EURASIP Journal on Applied Signal Processing, 2005, pp. 2292-2304.

569

Butler, Zack, Corke, Peter, Peterson, Ron, & Rus, Daniela (2006) From robots to animals : Virtual fences for controlling cattle. The International Journal of Robotics Research, 25(5/6), pp. 485-508.

Buys, Laurie, Aird, Rosemary, & Miller, Evonne (2011) Service providers' perceptions of active ageing among older adults with lifelong intellectual disabilities. Journal of Intellectual Disability Research, 56(12), pp. 1133-1147.

Buys, Laurie, Boulton-Lewis, Gillian M., Tedman-Jones, Jan S., Edwards, Helen E., Knox, Marie F., & Bigby, Christine (2008) Issues of active ageing : perceptions of older people with lifelong intellectual disability. Australasian Journal On Ageing, 27(2), pp. 67-71.

403

Buys, Laurie & Knight, Stephen (2003) The involvement and influence of adult children in their parents’ decision to move to a retirement village. Australasian Journal on Ageing, 22(2), pp. 91-93.

Buys, Laurie & Miller, Evonne (2011) Conceptualising convenience : transportation practices and perceptions of inner-urban high density residents in Brisbane, Australia. Transport Policy, 18(1), pp. 289-297.

Buys, Laurie & Miller, Evonne (2009) Enhancing social capital in children via school-based community cultural development projects : A pilot study. International Journal of Education for the Arts, 10(3).

198

Buys, Laurie & Miller, Evonne (2007) The Physical, Leisure and Social Activities of Very Old Australian Men Living in a Retirement Village and the Community. Geriaction, 25(2), pp. 15-19.

Buys, Laurie & Miller, Evonne (2012) Residential satisfaction in inner urban higher-density Brisbane, Australia : role of dwelling, neighbours and neighbourhood. Journal of Environmental Planning and Management, 55(3), pp. 319-338.

Buys, Laurie, Miller, Evonne, & van Megen, Kimberley (2012) Conceptualising climate change in rural Australia : community perceptions, attitudes and (in) actions. Regional Environmental Change, 12(1), pp. 237-248.

248

Buys, Laurie, Roberto, Karen A., Miller, Evonne, & Blieszner, Rosemary (2008) Prevalence and predictors of depressive symptoms among rural older Australians and Americans. Australian Journal of Rural Health, 16(1), pp. 33-39.

148

Buys, Laurie, Snow, Stephen, van Megen, Kimberley, & Miller, Evonne (2012) Transportation behaviours of older adults : an investigation into car dependency in urban Australia. Australasian Journal on Ageing, 31(3), pp. 181-186.

CHENG, Jack, Evans, John, HUANG, Xiaolin, & KWONG, Kevin (2003) Acoustic Transmission in Normal Human Hips: Structural Testing of Joint Symmetry. Medical Engineering and Physics, 25(10), pp. 811-816.

CHOW, York, Evans, John, LAM, Wai, Mak, Arthur, & TAM, Eric (2003) Pelvic Movement and Interface Pressure Distribution During Wheelchair Propulsion. Archives of Physical Medicine and Rehabilitation, 84(October), pp. 1466-1472.

Cai, Jinhai & Walker, Rodney (2010) Height estimation from monocular image sequences using dynamic programming with explicit occlusions. IET Computer Vision, 4(3), pp. 149-161.

Cai, Jinhai & Walker, Rodney A. (2009) Robust video stabilisation algorithm using feature point selection and delta optical flow. IET Computer Vision, 3(4), pp. 176-188.

574

Cai, Yan-hong, Chen, Hao-ran, Tang, Li-qiang, Yan, Cheng, & Jiang, Wan (2008) The dynamic stress intensity factor analysis of adhesively bonded material interface crack with damage under shear loading. Applied Mathematics and Mechanics, 29(1), pp. 1-10.

Caldas, Carlos, Chi, Seokho, Gong, Jie, & Teizer, Jochen (2006) Intelligent computing and sensing for active safety on construction sites. Lecture Notes in Computer Science, 4200, pp. 101-108.

Calder, James D. F., Saxby, Terry S., & Whitehouse, Sarah L. (2004) Results of isolated Lisfranc injuries and the effect of compensation claims. Journal of Bone and Joint Surgery: British Volume, 86(4), pp. 527-30.

1,291

Campbell, Jennifer, Smith, David, Boulton-Lewis, Gillian M., Brownlee, Joanne M., Burnett, Paul C., Carrington, Suzanne B., et al. (2001) Students’ perceptions of teaching and learning: the influence of students’ approaches to learning and teachers’ approaches to teaching. Teachers and Teaching : Theory and Practice, 7(2), pp. 173-187.

416

Campoy, Pascual, Correa, Juan F., Mondragon, Ivan, Martinez, Carol, Olivares, Miguel, Mejias, Luis, et al. (2008) Computer Vision Onboard UAVs for Civilian Tasks. Journal of Intelligent and Robotic Systems, 54(1-3), pp. 105-135.

Cao, Zhenwei & Ledwich, Gerard (2002) Adaptive Repetitive Control to Track Variable Periodic Signals with Fixed Sampling Rate. IEEE - ASME Transactions on Mechatronics, 7(3), pp. 378-384.

Capasso, Andrea, Waclawik, Eric R., Ruffell, Simon, Sgarlata, Anna, Scarselli, Manuela, De Crescenzi, Maurizio, et al. (2010) Carbon nanotube synthesis from germanium nanoparticles on patterned substrates. Journal of Non-Crystalline Solids. (In Press)

193

Carbone, Angelo, Howie, Donald W., McGee, Margaret, Field, John, Pearcy, Mark J., Smith, Nigel, et al. (2006) Ageing performance of a compliant layer bearing acetabular prosthesis in an ovine hip arthroplasty model. Journal of Arthroplasty, 21(6), pp. 899-906.

Cargill, Sara C., Barry, Mark D., & Pearcy, Mark J. (2007) Three dimensional lumbar spine postures measured by MRI reconstruction. Spine: an international journal for the study of the spine, 32(11), pp. 1242-1248.

Carrillo, Francisco Javier, Metaxiotis, Kostas, & Yigitcanlar, Tan (2010) Urban, regional, national and global knowledge capital [Guest editorial]. Journal of Knowledge Management, 14(5), pp. 631-634.

Carroll, Steven P. & Goonetilleke, Ashantha (2005) Assessment of high density of onsite wastewater treatment systems on a shallow groundwater coastal aquifer using PCA. Environmetrics, 16(3), pp. 257-274.

550

Carroll, Steven P., Goonetilleke, Ashantha, & Dawes, Les A. (2004) Framework for soil suitability evaluation for sewage effluent renovation. Environmental Geology, 46(2), pp. 195-208.

610

Carroll, Steven P., Goonetilleke, Ashantha, Khalil, Wael Al-Shiekh, & Frost, Ray L. (2006) Assessment via discriminant analysis of soil suitability for effluent renovation using undisturbed soil columns. Geoderma, 131(1-2), pp. 201-217.

650

Carroll, Steven P., Goonetilleke, Ashantha, Thomas, Evan C., Hargreaves, Megan, Frost, Ray L., & Dawes, Les A. (2006) Integrated risk framework for onsite wastewater treatment systems. Environmental Management, 38(2), pp. 286-303.

5,005

Carroll, Steven P., Hargreaves, Megan, & Goonetilleke, Ashantha (2005) Sourcing fecal pollution from onsite wastewater treatment systems in surface waters using antibiotic resistance analysis. Journal of Applied Microbiology, 99(3), pp. 471-482.

634

Carroll, Steven Paige, Dawes, Les A., Hargreaves, Megan, & Goonetilleke, Ashantha (2009) Faecal pollution source identification in an urbanising catchment using antibiotic resistance profiling, discriminant analysis and partial least squares regression. Water Research, 43(5), pp. 1237-1246.

188

Carty, Christopher, Dickinson, Ian, Watts, Mark, Crawford, Ross, & Steadman, Peter (2009) Impairment and disability following limb salvage procedures for bone sarcoma. The Knee, 16(5), pp. 405-408.

Chakrabarti, S., Kyriakides, E., Ledwich, G., & Ghosh, A. (2010) Inclusion of PMU current phasor measurements in a power system state estimator. IET Generation, Transmission & Distribution, 4(10), pp. 1104-1115.

Chakrabarti, Saikat (2009) Static load modelling and voltage stability indices. International Journal of Power and Energy Systems, 29(3), pp. 200-205.

Chakrabarti, Saikat, Kyriakides, Elias, Bi, Tianshu, Cai, Deyu, & Terzija, Vladimir (2009) Measurements get together. IEEE power & energy magazine, 7(1), pp. 41-49.

445

Chakrabarti, Saikat, Kyriakides, Elias, & Eliades, Demetrios (2009) Placement of Synchronized Measurements for Power System Observability. IEEE TRANSACTIONS ON POWER DELIVERY, 24(1), pp. 12-19.

593

Challis, Murray, Crawford, Ross, Jull, Gwendolen, & Welsh, M (2005) Effect of Cyclic Pneumatic Soft Tissue Compression on Simulated Distal Radius Fractures. Clinical Orthopaedics and Related Research, 2005(433), pp. 183-188.

Challis, Murray, Gaston, Paul, Wilson, Katherine, Jull, Gwendolen, & Crawford, Ross (2006) Cylic pneumatic soft-tissue compression accelerates the union of distal radial osteotomies in an ovine model. Journal of Bone and Joint Surgery: British Volume, 88(3), pp. 411-415.

Chamorro-Koc, Marianella, Popovic, Vesna, & Emmison, Michael (2008) Human experience and product usability : principles to assist the design of user-product interactions. Applied Ergonomics, 40(4), pp. 648-656.

Chamorro-Koc, Marianella, Popovic, Vesna, & Emmison, Michael (2008) Using visual representation of conepts to explore users and designers' concepts of everyday products. Design Studies. The international journal for design research in engineering, architecture, products and systems, 29(2), pp. 142-159.

Chan, Albert & Chan, Ada P.L. (2004) Key performance indicators for measuring construction success. Benchmarking, 11(2), pp. 203-221.

Chan, K.Yin & Sivapragasam, Siva (1996) Amelioration of a degraded hardsetting soil using an anionic polymeric conditioner. Soil Technology, 9(1-2), pp. 91-100.

679

Chan, T.H.T., Li, Z.X., Yu, Y., & Sun, Z.H. (2009) Concurrent multi-scale modeling of civil infrastructures for analyses on structural deteriorating—Part II : Model updating and verification. Finite Elements in Analysis and Design, 45(11), pp. 795-805.

Chan, Tommy H.T. & Ashebo, Demeke B. (2006) Moving axle load from multi-span continuous bridge: Laboratory study. Journal of Vibration and Acoustics, 128(4), pp. 521-526.

Chan, Tommy H.T. & Ashebo, Demeke B. (2006) Theoretical study of moving force identification on continuous bridges. Journal of Sound and Vibration, 295(3-5), pp. 870-883.

Chan, Tommy H.T., Ashebo, Demeke B., Tam, H.Y., Yu, Y., Chan, T.F., Lee, P.C., et al. (2009) Vertical displacement measurements for bridges using optical fiber sensors and CCD cameras : a preliminary study. Structural Health Monitoring, 8(3), pp. 243-249.

Chan, Tommy H.T., Bakht, B., & Wong, M.Y. (1995) An Introduction to Simplified Methods of Bridge Analysis for Hong Kong. The Hong Kong Institution of Engineers, 2(1), pp. 1-8.

Chan, Tommy H.T. & Chan, Jeffrey H.F. (1999) The use of eccentric beam elements in the analysis of slab-on-girder bridges. Structural Engineering and Mechanics, 8(1), pp. 85-102.

Chan, Tommy H.T., Guo, L., & Li, Z.X. (2003) Finite Element Modelling for Fatigue Stress Analysis of Large Suspension Bridges. Journal of Sound and Vibration, 261(3), pp. 443-464.

Chan, Tommy H.T., Law, S.S., & Yung, T.H. (1998) Modal Test on an Existing Concrete Bridge: Experience Acquired. The Hong Kong Institution of Engineers, 5(3), pp. 8-16.

Chan, Tommy H.T., Law, S.S., & Yung, T.H. (2000) Moving force identification using an existing prestressed concrete bridge. Engineering Structures, 22(10), pp. 1261-1270.

Chan, Tommy H.T., Law, SS, Yung, T.H., & Yuan, X.R. (1999) An interpretive method for moving force identification. Journal of Sound and Vibration, 219(3), pp. 503-524.

Chan, Tommy H.T., Li, Z.X., & Ko, Jan Ming (2004) Evaluation of typhoon induced fatigue damage using health monitoring data for the Tsing Ma bridge. Structural Engineering and Mechanics, 17(5), pp. 655-670.

Chan, Tommy H.T., Li, Z.X., & Ko, Jan Ming (2001) Fatigue Analysis and Life Prediction of Bridge with Health Monitoring Data – Part II: Application. International Journal of Fatigue, 23(1), pp. 55-64.

Chan, Tommy H.T., Miao, T.J., & Ashebo, Demeke B. (2005) Statistical models from weigh-in-motion data. Structural Engineering and Mechanics, 20(1), pp. 85-110.

Chan, Tommy H.T. & O'Connor, Colin (1990) Vehicle Model for Highway Bridge Impact. Journal of Structural Engineering, 116(7), pp. 1772-1793.

Chan, Tommy H.T. & O'Connor, Colin (1990) Wheel Loads from Highway Bridge Strains: Field Studies. Journal of Structural Engineering, 116(7), pp. 1751-1771.

Chan, Tommy H.T., Yu, Ling, & Law, S.S. (2000) Comparative studies on moving force identification from bridge strains in laboratory. Journal of Sound and Vibration, 235(1), pp. 87-104.

Chan, Tommy H.T., Yu, Ling, Law, S.S., & Yung, T.H. (2001) Moving Force Identification Studies I: Theory. Journal of Sound and Vibration, 247(1), pp. 59-76.

Chan, Tommy H.T., Yu, Ling, Law, S.S., & Yung, T.H. (2001) Moving Force Identification Studies II: Comparative Studies. Journal of Sound and Vibration, 247(1), pp. 77-95.

Chan, Tommy H.T., Yu, Ling, Tam, Hwa-Yaw, Ni, Yi-Qing, Chung, W.H., & Cheng, L.K. (2006) Fiber Bragg grating sensors for structural health monitoring of Tsing Ma bridge : Background and experimental observation. Engineering Structures, 28(5), pp. 648-659.

Chan, Tommy H.T., Yu, Ling, Yung, T.H., & Chan, Jeffrey H.F. (2003) A New Bridge-Vehicle System Part I: Formulation and Validation. Structural Engineering and Mechanics, 15(1), pp. 1-19.

Chan, Tommy H.T., Yu, Ling, Yung, T.H., & Chan, Jeffrey H.F. (2003) A new bridge-vehicle system - part II: Parametric study. Structural Engineering and Mechanics, 15(1), pp. 21-38.

Chan, Tommy H.T. & Yung, T.H. (2000) A theoretical study of force identification using prestressed concrete bridges. Engineering Structures, 22(11), pp. 1529-1537.

Chan, Tommy H.T., Zhou, Taiquan, Li, Z.X., & Guo, L. (2005) Hot spot stress approach for Tsing Ma bridge fatigue evaluation under traffic using finite element method. Structural Engineering and Mechanics, 19(3), pp. 261-279.

Chan, Z.S.H., Ngan, H.W., Rad, A.B., & Ho, T.K. (2002) Alleviating ‘overfitting’ via genetically-regularised neural network. Electronics Letters, 38(15), pp. 809-810.

Chandran, V. & Elgar, S. L. (1991) Mean and variance of estimates of the bispectrum of a harmonic random process-an analysis including leakage effects. IEEE Transactions on Signal Processing, 39(12), 2640-2651 .

Chandran, Vinod, Carswell, Brett, Boashash, Boualem, & Elgar, Steve (1997) Pattern recognition using invariants defined from higher order spectra : 2-D image inputs. IEEE Transactions on Image Processing, 6(5), pp. 703-712.

Chandran, Vinod & Elgar, S. (1994) A general procedure for the derivation of principal domains of higher-order spectra. IEEE Transactions on Signal Processing, 42(1), pp. 229-233.

Chandran, Vinod & Elgar, Stephen L. (1993) Pattern recognition using invariants defined from higher order spectra - one-dimensional inputs. IEEE Transactions on Signal Processing, 41(1), pp. 205-212.

Chandran, Vinod, Elgar, Steve, & Nguyen, Anthony (2002) Detection of mines in acoustic images using higher order spectral features. IEEE Journal of Oceanic Engineering, 27(3), pp. 610-618.

254

Chandran, Vinod, Elgar, Steve, & Pezeshki, Charles (1993) Bispectral and trispectral characterization of transition to chaos in the Duffing oscillator. International Journal of Bifurcation and Chaos (ijbc), 3(3), pp. 551-557.

Chandran, Vinod, Elgar, Steve, & Vanhoff, Barry (1994) Statistics of tricoherence. IEEE Transactions on Signal Processing, 42(12), pp. 3430-3440.

Chang, H.I., Lau, Y.C., Yan, Cheng, & Coombes, Alan (2008) Controlled release of an antibiotic, gentamicin sulphate, from gravity spun polycaprolactone fibers. Journal of Biomedical Materials Research Part A, 84A(1), pp. 230-237.

378

Chanson, Hubert, Brown, Richard J., Ferris, John, Ramsay, Ian, & Warburton, Kevin (2005) Preliminary Measurements of Turbulence and Environmental Parameters in a Sub-Tropical Estuary of Eastern Australia. Environmental Fluid Mechanics, 5(6), pp. 553-575.

Chapman, Paul & Maine, Tony (2007) The Value of Solar: Prices and Output from Distributed Photovoltaic Generation in South Australia. Energy Policy, 35(1), pp. 461-466.

Charleson, Andrew, Preston, Julieanna, & Taylor, Mark (2001) Architectural Expression of Seismic Strengthening. Earthquake Spectra, 17(3), pp. 417-426.

440

Chatterjee, Dheeman & Ghosh, Arindam (2007) Application of Trajectory Sensitivity for the Evaluation of the Effect of TCSC Placement on Transient Stability. International Journal of Emerging Electric Power Systems, 8(1).

695

Chatterjee, Dheeman & Ghosh, Arindam (2011) Improvement of transient stability of power systems with STATCOM-controller using trajectory sensitivity. International Journal of Electrical Power and Energy Systems, 33(3), pp. 531-539.

Chatterjee, Dheeman & Ghosh, Arindam (2007) TCSC control design for transient stability improvement of a multi-machine power system using trajectory sensitivity. Electric Power Systems Research, 77(5-6), pp. 470-483.

Chatterjee, Dheeman & Ghosh, Arindam (2007) Transient Stability Assessment of Power Systems Containing Series and Shunt Compensators. IEEE Transactions on Power Engineering, 22(3), pp. 1210-1220.

532

Chattopadhyay, Gopi, Hargreaves, Douglas, Larsson-Kraik, Per, & Reddy, Venkatarami (2004) Assessment of Risks and Cost Benefit Analysis of Various Lubrication Strategies for Rail Tracks Under Different Operating Conditions. Tribologia, Finnish Journ of Tribology, 23(1-2), pp. 32-40.

Chattopadhyay, Gopi, Hargreaves, Douglas, Larsson-Kraik, Per-Olaf, & Reddy, Venkatarami (2007) Modelling and Analysis of Rail Maintenance Cost. International Journal of Production Economics, 105(2), pp. 475-482.

Chattopadhyay, Gopi, Larsson-Kraik, Per, & Reddy, Venkatarami (2005) Decision on Economical Rail Grinding Interval for Controlling Rolling Contact Fatigue. International Transactions in Operational Research, 12(6), pp. 545-558.

Chattopadhyay, Gopi & Murthy, Prabhakar (2004) Optimal Reliability Improvement for Used Items Sold with Warranty. International Journal of Reliability and Applications, 5(2), pp. 47-58.

Chattopadhyay, Gopi & Rahman, Anisur (2008) Development of lifetime warranty policies and models for estimating costs. Reliability Engineering & System Safety, 93(4), pp. 522-529.

Chattopadhyay, Gopi & Rahman, Anisur (2006) Review of Long-Term Warranty Policies. Asia-Pacific Journal of Operational Research, 23(4), pp. 453-472.

Chattopadhyay, Gopi & Yun, Won Young (2006) Modeling and Analysis of Warranty Cost for 2D-Policies Associated with Sale of Second-hand Products. International Journal of Reliability and Applications, 7(1), pp. 71-77.

Chawda, Mayur, Hucker, Peter, Whitehouse, Sarah L., Crawford, Ross W., English, Hugh, & Donnelly, William J. (2008) Comparison of cemented versus uncemented acetabular component positioning using an imageless navigation system. Journal of Arthroplasty, 24(8), pp. 1170-1173.

261

Chen, C, He, T., Mao, Xueli, Friis, Thor, Qin, R, & Jian, Y (2010) A novel xylene substitute for histotechnology and histochemistry. Biotechnic and Histochemistry: a journal for microtechnic and histochemistry, 85(4), pp. 231-240.

Chen, C., Ren, F., Lu, T., Friis, Thor, He, T., Zhang, X., et al. (2010) Involvement of salivary glands in regulating the human nitrate and nitrite levels. Archives of Oral Biology: a multidisciplinary journal of oral and craniofacial sciences, 55(9), pp. 613-620.

Chen, Daniel, Mamic, George, Fookes, Clinton B., & Sridharan, Sridha (2009) Scale-space volume descriptors for automatic 3D facial feature extraction. International Journal of Signal Processing, 5(4), pp. 264-269.

127

Chen, Frank Lin, Lemma, Engida, Siores, Elias, & Wang, Jun (2003) Striation Formation Mechanisms on the Jet Cutting Surface. Journal of Materials Processing Technology, 141, pp. 213-218.

Chen, Fulin, Zhou, Yefang, Saey Tuan, Barnabas, Woodruff, Maria A., & Hutmacher, Dietmar W. (2007) Engineering tubular bone constructs. Journal of Biomechanics, 40(Supplementary 1), s73-s79.

101

Chen, Gongfa & Baker, Graham (2004) An Analytical Model for Predication of Crack Spacing Due to Shrinkage in Concrete Pavements. Journal of Structural Engineering, 130(10), pp. 1529-1533.

Chen, Gongfa & Baker, Graham (2003) Influence of bond slip on crack spacing in numerical modeling of reinforced concrete. Journal of Structural Engineering, 129(11), pp. 1514-1521.

Chen, Gongfa & Baker, Graham (2003) Rayleigh-Ritz analysis for localized buckling of a strut on a softening foundation by Hermite functions. International Journal of Solids and Structures, 40(26), pp. 7463-7474.

Chen, Gongfa, Fukuyama, Hiroshi, Teshigawara, Muki, & Etoh, Hiro (2007) Parametric investigations on columns with un-bonded reinforcing bars for damage control. Advances in Structural Engineering: an international journal, 10(2), pp. 171-181.

Chen, Gongfa, Fukuyama, Hiroshi, Teshigawara, Muki, Etoh, Hiro, Kusunoki, Kaida, & Suwada, H (2007) Numerical Simulation of Columns with Un-bonded Reinforcing Bars for Crack Control. Structural Engineering and Mechanics, 26(4), pp. 409-426.

Chen, Gongfa, Pettet, Graeme J., Pearcy, Mark J., & McElwain, Sean (2007) Comparison of two numerical approaches for bone remodelling. Medical Engineering and Physics, 29(1), pp. 134-139.

Chen, Gongfa, Pettet, Graeme J., Pearcy, Mark J., & McElwain, Sean (2007) Modelling external bone adaptation using evolutionary structural optimisation. Biomechanical and Modeling in Mechanobiology, 6(4), pp. 275-285.

Chen, Gongfa, Schmutz, Beat, Epari, Devakara, Rathnayaka, Kanchana, Ibrahim, Salma, Schuetz, Michael, et al. (2010) A new approach for assigning bone material properties from CT images into finite lement models. Journal of Biomechanics, 43(5), pp. 1011-1015.

Chen, Gongfa, Schmutz, Beat, Wullschleger, Martin, Pearcy, Mark, & Schuetz, Michael (2010) Computational investigations of mechanical failures of internal plate fixation. Institution of Mechanical Engineers. Proceedings. Part H: Journal of Engineering in Medicine, 224(1), pp. 119-126.

Chen, Gongfang, Fan, Wei, Mishra, Sanjay K., El-Atem, Adam, Schuetz, Michael, & Xiao, Yin (2012) Tooth fracture risk analysis based on a new finite element dental structure models using micro-CT data. Computers in Biology and Medicine, 42(10), pp. 957-963.

Chen, Hongtao, Wang, Chunqing, Yan, Cheng, Huang, Y., & Tian, Yanhong (2007) Effects of solder volume on formation and redeposition of Au-containing intermetallics in Au/Ni-SnAgCu-Ni(P) solder joints. Journal of Electronic Materials, 36(1), pp. 33-39.

186

Chen, Hongtao, Wang, Chunqing, Yan, Cheng, Li, Mingyu, & Huang, Y. (2007) Cross-interaction of interfacial reactions in Ni (Au/Ni/Cu)-SnAg-Cu solder joints during reflow soldering and thermal aging. Journal of Electronic Materials, 36(1), pp. 26-32.

279

Chen, Kevin, Henricksen, Matthew P., Millan, William L., Fuller, Joanne, Simpson, Leonie, Dawson, Edward, et al. (2005) Dragon: A Fast Word Based Stream Cipher. Lecture Notes in Computer Science : Information Security and Cryptology (ICISC 2004), 3506, pp. 33-50.

Chen, L, Lemma, E, Siores, Elias, & Wang, Jun (2002) Optimising the AWJ Cutting Process of Ductile Materials using Nozzle Oscillation Technique. International Journal of Machine Tools & Manufacture, 42, pp. 781-789.

Chen, L, Lemma, E, Siores, Elias, & Wang, Jun (2002) Study of Cutting Fiber-reinforced Composites by using Abrasive Water-jet with Cutting Head Oscillation. Composite Structures, 57, pp. 297-303.

Chen, Nian-Zhong, Lee, Winson C.C., & Zhang, Ming (2006) A numerical approach to evaluate the fatigue life of monolimb. Medical Engineering and Physics, 28(3), pp. 290-296.

519

Chen, Nian-Zhong, Lee, Winson C.C., & Zhang, Ming (2006) A robust design procedure for improvement of quality of lower-limb prosthesis. Bio-Medical Materials and Engineering, 16(5), pp. 309-318.

153

Chen, S. K., Ho, T. K., & Mao, B. H. (2007) Reliability evaluations of railway power supplies by fault-tree analysis. IET Electric Power Applications, 1(2), p. 161.

157

Chen, S. K., Ho, Tin Kin, & Mao, B. H. (2007) Component reliability estimations without field data. Hong Kong Institution of Engineers, Transactions, 14(3), pp. 10-17.

106

Chen, Tsuhan, Chandran, Vinod, Lucey, Simon, & Sridharan, Subramanian (2005) Integration strategies for audio-visual speech processing : Applied to text-dependent speaker recognition. IEEE Transactions on Multimedia, 7(3), pp. 495-506.

Chen, Xiaoqin, Jones, Haley, & Jayalath, Dhammika (2011) Channel-aware routing in MANETs with route handoff. IEEE Transactions on Mobile Computing, 10(1), pp. 108-121.

422

Chen, Y., Dong, Z., & Miao, Xigeng (2008) The Effect of Yttria-Stabilized Zirconia on the Properties of the Fluorine–Substituted Hydroxyapatite Ceramics Prepared by Pressureless Sintering. Journal of Biomimetics, Biomaterials and Tissue Engineering, 1, pp. 57-68.

269

Chen, Yanming & Miao, Xigeng (2004) Effect of fluorine addition on the corrosion resistance of hydroxyapatite ceramics. Ceramics International, 30(7), pp. 1961-1965.

Chen, Yanming & Miao, Xigeng (2005) Thermal and chemical stability of fluoro-hydroxyapatite ceramics with different fluorine contents. Biomaterials, 26(11), pp. 1205-1210.

526

Chen, Yi, Crawford, Ross W., & Oloyede, Adekunle (2007) Preliminary evaluation of the capacity of surface-active phospholipids to provide semipermeability in a saline filtration environment. Medical Science Monitor, 13(4), pp. 101-105.

181

Chen, Yi, Hills, Brian, & Hills, Yvette (2005) Unsaturated Phosphatidylcholine and its Application in Surgical Adhesion. ANZ Journal of Surgery, 75(12), pp. 1111-1114.

Chen, Yi, Hills, Brian, Hills, Yvette, & Mills, Paul (2005) Differences in Surfactant Lipids Collected from Pleural and Pulmonary Lining Fluids. Pharmaceutical Research, 22(11), pp. 1926-1930.

Chen, Yi A., Crawford, Ross W., & Oloyede, Adekunle (2007) Unsaturated Phosphatidylcholines Lining on the Surface of Cartilage and its Possible Physiological Roles. Journal of Orthopaedic Surgery and Research, 2(14), pp. 2-14.

193

Chen, Ying, Zhang, Jian, & Jayalath, Dhammika (2008) Clipping Noise Compensation for OFDM Systems. Electronics Letters, 44(25), pp. 1490-1491.

111

Chen, Ying, Zhang, Jian (Andrew), & Jayalath, Dhammika (2010) Estimation and compensation of clipping noise in OFDMA systems. IEEE Transactions on Wireless Communications, 9(2), pp. 523-527.

110

Chen, Ying, Zhang, Jian (Andrew), & Jayalath, Dhammika (2009) Low-complexity estimation of CFO and frequency independent I/Q mismatch for OFDM systems. EURASIP Journal on Wireless Communications and Networking, 2009, pp. 1-11.

100

Chen, Z.C., Ekaputra, A. K., Gauthaman, K., Adaikan, P.G., Yu, H., & Hutmacher, D. W. (2008) In vitro and in vivo analysis of co-electrospun scaffolds made of medical grade poly(epsilon-caprolactone) and porcine collagen. Journal of Biomaterials Science (Polymer Edition), 19(5), pp. 693-707.

Cheng, Aldous, Chow, Daniel, Evans, John, & Holmes, Andrew (2003) The effects of release height on center of pressure and trunk muscle response following sudden release of stoop lifting tasks. Applied Ergonomics, 34(6), pp. 611-619.

Cheng, C., Lam, K. M., & Demirbilek, Nur (2008) Effects of building wall arrangements on wind-induced ventilation through the refuge floor of a tall building. Journal of Wind Engineering and Industrial Aerodynamics, 96(5), pp. 656-664.

220

Cheng, Charles Chor Kwan, Leung, Andrew Yee Tak, Lam, Kit Ming, Demirbilek, Nur, & Williamson, Brian J. (2010) A CFC study of Hong Kong refuge floor design : floor height effect. Engineering Applications of Computational Fluid Mechanics, 4(3), pp. 425-433.

Cheng, Chor Kwan Charles, Lam, K.M., Lo, S.M., & Yuen, K.K. (2005) CFD Wind Tunnel Test: Field Velocity Patterns of Wind on a Building with a Refuge Floor. International Journal of Computational Fluid Dynamics, 19(7), pp. 531-544.

Cheng, Irene, CHOW, Daniel, Evans, John, & Holmes, Andrew (2005) Muscular and centre of pressure response to sudden release of load in symmetric and asymmetric stoop lifting tasks. Applied Ergonomics, 36(1), pp. 13-24.

Cheng, Jack, Evans, John, Huang, Xiaolin, & Kwong, Kevin (2003) New Technique for Early Screening of Developmental Dysplasia of the Hip: Pilot Study. Journal of paediatric Orthopaedics, 23, pp. 347-351.

Cheng, Pei Lai & Pearcy, Mark J. (2001) Graphical presentation of the range of hip and knee rotations for clinical evaluation of gait. Clinical Biomechanics, 16(1), pp. 84-86.

Cheng, Wen & Washington, Simon (2008) New criteria for evaluating methods of identifying hot spots. Transportation Research Record, 2083(2008), pp. 76-85.

Cheong, Julia, O'Flaherty, Patrick, Dawes, Les A., & Foong, Yin (2011) Preliminary development of a sewerage infrastructure buffer assessment tool for engineering risk and strategic land use planning. Desalination and Water Treatment, 32, pp. 169-178.

192

Cheung, Esther & Chan, Albert (2009) Practice briefing : Is BOT the best financing model to procure infrastructure projects? A case study of the Hong Kong-Shuhai-Macau Bridge. Journal of Property Investment and Finance, 27(3), pp. 290-302.

Cheung, Esther, Chan, Albert, & Kajewski, Stephen L. (2009) Enhancing value for money in public private partnership projects : findings from a survey conducted in Hong Kong and Australia compared to findings from previous research in the UK. Journal of Financia Management of Property and Construction, 14(1), pp. 7-20.

919

Cheung, Esther, Chan, Albert, & Kajewski, Stephen L. (2012) Factors contributing to successful public private partnership projects : comparing Hong Kong with Australia and the United Kingdom. Journal of Facilities Management, 10(1), pp. 45-58.

246

Cheung, Esther, Chan, Albert, & Kajewski, Stephen L. (2009) Reasons for implementing public private partnership projects : perspectives from Hong Kong, Australian and British practitioners. Journal of Property Investment and Finance, 27(1), pp. 81-95.

736

Cheung, Esther, Chan, Albert, & Kajewski, Stephen L. (2010) Suitability of procuring large public works by PPP in Hong Kong. Engineering, Construction and Architectural Management, 17(3), pp. 292-308.

Cheung, Esther, Chan, Albert, & Kajewski, Stephen L. (2010) The public sector’s perspective on procuring public works projects : comparing the views of practitioners in Hong Kong and Australia. Journal of Civil Engineering and Management, 16(1).

Cheung, Esther, Chan, Albert, & Kajewski, Stephen L. (2010) The researcher’s perspective on procuring public works projects. Structural Survey, 28(4).

Cheung, Franco K. T., Wong, Margie W. L., & Skitmore, Martin (2008) A study of clients' and estimators' tolerance towards estimating errors. Construction Management and Economics, 26(4), pp. 349-362.

237

Cheung, Franco K.T., Kuen, Judy L.F., & Skitmore, Martin (2002) Multi-criteria evaluation model for selection of architectural consultants. Construction Management and Economics, 20(7), pp. 569-580.

2,147

Cheung, Franco K.T. & Skitmore, Martin (2006) Application of cross validation techniques for modelling construction costs during the very early design stage. Building and Environment, 41(12), pp. 1973-1990.

512

Cheung, Franco K.T. & Skitmore, Martin (2006) A modified storey enclosure model. Construction Management and Economics, 24(4), pp. 391-406.

224

Cheung, Sai On, Wong, Peter S. P., Fung, Ada Y. S., & Coffey, W. V. (2008) Examining the use of bid information in predicting the contractor’s performance. Journal of Financial Management of Property and Construction, 13(2), pp. 111-122.

134

Cheung, Sai On, Wong, Peter Shek Pui, Fung, Ada S. Y., & Coffey, Vaughan (2006) Predicting project performance through neural networks. International Journal of Project Management, 24(3), pp. 207-215.

190

Cheung, Yan Ki Fiona, Rowlinson, Steve, Jefferies, Marcus, & Lau, E (2005) Relationship contracting in Australia. Journal of Construction Procurement, 11(2), pp. 123-135.

Cheung, Yan Ki Fiona, Rowlinson, Steve, Simons, Roland H., & Rafferty, Alannah (2006) Alliancing in Australia—No-Litigation contracts : a tautology? Journal of Professional Issues in Engineering Education and Practice, 132(1), pp. 77-81.

297

Cheung, Yan Ki Fiona & Rowlison, Steve (2011) Supply chain sustainability: a relationship management approach. International Journal of Managing Projects in Business, 4(3), pp. 480-497.

119

Chi, Seokho & Caldas, Carlos (2011) Automated object identification using optical video cameras on construction sites. Computer-Aided Civil and Infrastructure Engineering, 26(5), pp. 368-380.

Chi, Seokho & Caldas, Carlos (2012) Design of a preliminary error impact analysis model for spatial safety assessment of earthmoving operations. Automation in Construction, 22, pp. 212-222.

Chi, Seokho & Caldas, Carlos (2012) Image-based safety assessment : automated spatial safety risk identification of earthmoving and surface mining activities. Journal of Construction Engineering and Management, 138(3), pp. 341-351.

Chi, Seokho, Caldas, Carlos, & Gong, Jie (2008) A crash avoidance framework for heavy equipment control systems using 3D imaging sensors. Journal of Information Technology in Construction (ITCON), Special Issue on Sensors in Construction and Infrastructure Management, 13, pp. 118-133.

137

Chi, Seokho, Caldas, Carlos, & Kim, Dae Young (2009) A methodology for object identification and tracking in construction based on spatial modeling and image matching techniques. Computer-Aided Civil and Infrastructure Engineering, 24(3), pp. 199-211.

Chi, Y L, Ferreira, Luis, Ho, T. K., & Siu, L K (2005) Traction Power System Simulation in Electrical Railways. Journal of Transportation Systems Engineering and Information Technology, 5(3), pp. 95-107.

Chi, Y.L., Ferreira, L., Ho, T.K., Leung, K., & Siu, L.K. (2006) Evaluation of maintenance schedules on railway traction power systems. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 220(2), pp. 91-102.

168

Chikolwa, Bwembya (2008) Assessing property risk In Australian commercial mortgage-backed securities. Pacific Rim Property Research Journal, 14(1), pp. 3-26.

805

Chikolwa, Bwembya (2008) Determinants Of Australian listed property trust bond ratings. Pacific Rim Property Research Journal, 14(2), pp. 123-149.

190

Chikolwa, Bwembya (2008) Financing infrastructure using asset-backed securities : lessons for developing countries. The Icfai University Journal of Infrastructure, VI(4), pp. 7-24.

Chikolwa, Bwembya (2008) Structuring issues for commercial mortgage-backed securities in Australia. Pacific Rim Property Research Journal, 14(3), pp. 334-355.

406

Chikolwa, Bwembya (2007) The development of commercial mortgage-backed securities in Australia. Pacific Rim Property Research Journal, 13(4), pp. 397-422.

545

Chikolwa, Bwembya & Chan, Felix (2008) Determinants of commercial mortgage-backed securities credit ratings : Australian evidence. International Journal of Strategic Property Management, 12(2), pp. 69-94.

100

Chikumoto, N, Hirabayashi, I, Hu, A, Murakami, M, Sakai, N, & Zhou, Hao (2005) Angular Dependence of the Peak Effect and Out-of-Plane Modulated Compositional Order in Melt-Processed (Sm, Ed, Gd) Ba2Cu3O7-delta Superconductors. Superconductor Science and Technology, 18(2), S131-S135.

Chin, Kwai, Krishnamurthy, Raghavan, XIE, Youbai, Yarlagadda, Prasad, & Zhou, Shouqin (2003) An Intelligent Approach of Knowledge Searching within Internet-Based Distributive Knowledge Integrated Environment. Engineering Application of Artificial Intelligence, 15, pp. 607-618.

Chin, Kwai, Peng, Z, Yarlagadda, Prasad, Zhao, A, & Zhou, Shouqin (2004) A Solution for Knowledge Resources Provide Over the Internet. International Journal of Advanced Manufacturing Technology, 24, pp. 148-160.

Chin, Kwai, Yarlagadda, Prasad, & Zhou, Shouqin (2003) A Two-Step Strategy for Knowledge Search over the Internet-Based Distributive Network. Annual Journal of the Institute of Industrial Engineers (HK), 2002-2003, pp. 35-40.

Choi, B K, Gu, Dong-Sik, Kim, Eric, Mathew, Joseph, Son, Jong-Duk, Tan, Andy, et al. (2008) Fault diagnosis of low speed bearing based on relevance vector machine and support vector machine. Expert Systems with Applications, 36(3), pp. 7252-7261.

Choi, B K, Kim, W C, Sin, Daniel, & Tan, Andy (2006) Estimation of Blood Flow in a Double Output Centrifugal Blood Pump. Journal of the Korean Society for Power System Engineering, 10(4), pp. 153-158.

Chow, Low J., Then, Danny, & Skitmore, Martin (2005) Characteristics of teamwork in Singapore construction projects. Journal of Construction Research, 6(1), pp. 15-46.

1,091

Christensen, H & Corke, Peter (2003) Editorial : Special issue on visual servoing. The International Journal of Robotics Research, 22(10/11), pp. 779-780.

Christodoulou, Perkilis, Hermanto, H, Wang, Jun, & Wei, Xiaopeng (2004) Rapid Tooling for Zinc Spin Casting using Arc Metal Spray Technology. Journal of Materials Processing Technology, 146, pp. 283-288.

Christodoulou, Perkilis, Teo, Siang Hock, Trevor, S., & Yarlagadda, Prasad (2003) Experimental Studies on the Accuracy of Wax Patterns Used in Investment Casting. Proceedings of the Institution of Mechanical Engineers Part B- Journal of Engineering Manufacture, 217, pp. 285-289.

Chua, Chua, Chandran, Vinod, Acharya, Rajendra, & Min, Lim (2009) Cardiac health diagnosis using higher order spectra and support vector machine. The Open Medical Informatics Journal, 3(2009), pp. 1-8.

Chua, K, Chandran, Vinod, Acharya, Rajendra, & Lim, C.M. (2009) Analysis of epileptic EEG signals using higher order spectra. Journal of Medical Engineering and Technology, 33(1), pp. 42-50.

Chua, K, Chandran, Vinod, Acharya, Rajendra, & Min, Lim (2009) Automatic identification of epileptic electroencephalography signals using higher-order spectra. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 223(4), pp. 485-495.

Chua, Kuang, Chandran, Vinod, Acharya, Rajendra, & Lim, C.M. (2010) Application of higher order spectra to identify epileptic EEG. Journal of Medical Systems, Online(Online), pp. 1-9.

Chua, Kuang Chua, Chandran, Vinod, Acharya, Rajendra, & Lim, Choo Min (2010) Application of higher order statistics/spectra in biomedical signals : a review. Medical Engineering and Physics, 32(7), pp. 679-689.

265

Chuan Chai, Tan & Yarlagadda, Prasad K. (1998) An investigation into welding of engineering thermoplastics using focused microwave energy. Journal of Materials Processing Technology, 74(1-3), pp. 199-212.

Chum, Zhi Zhen, Woodruff, Maria A., Cool, Simon M., & Hutmacher, Dietmar W. (2009) Porcine bone marrow stromal cell differentiation on heparin-adsorbed poly (e-caprolactone)-tricalcium phosphate-collagen scaffolds. Acta Biomaterialia, 5(9), pp. 3305-3315.

Chung, Edward & Kuwahara, Masao (2007) Mapping personal trip OD from probe data. International Journal of Intelligent Transportation Systems Research, 5(1), pp. 1-6.

100

Chung, Koohong, Jang, Kitae, Madanat, Samer, & Washington, Simon (2011) Proactive detection of high collision concentration locations on highways. Transportation Research Part A : Policy and Practice, 45(9), pp. 927-934.

Chyba, M., Haberkorn, T., Smith, R.N., Singh, S.B., & Choi, S.K. (2009) Increasing underwater vehicle autonomy by reducing energy consumption. Ocean Engineering, 36(1), pp. 62-73.

Chyba, Monique, Haberkorn, Thomas, Smith, Ryan N., & Choi, S.K. (2008) Design and implementation of time efficient trajectories for an underwater vehicle. Ocean Engineering, 35(1), pp. 63-76.

112

Chyba, Monique, Haberkorn, Thomas, Smith, Ryan N., & Choi, Song K. (2008) Autonomous underwater vehicles: development and implementation of time and energy efficient trajectories. Ship Technology Research, 55(2), pp. 36-48.

Chyba, Monique, Haberkorn, Thomas, Smith, Ryan N., & Wilkens, George R. (2009) A geometrical analysis of trajectory design for underwater vehicles. Discrete and Continuous Dynamical Systems-B, 11(2), pp. 233-262.

Cipitria, A., Skelton, A., Dargaville, T.R., Dalton, P.D., & Hutmacher, D.W. (2011) Design, fabrication and characterization of PCL electrospun scaffolds—a review. Journal of Materials Chemistry, 21, pp. 9419-9453.

292

Clark, Brian, Perera, Nimal, & Thambiratnam, David (2008) Enhancing the impact energy absorption in roll over protective structures. International Journal of Crashworthiness, 13(2), pp. 167-183.

Clark, Brian J., Thambiratnam, David P., & Perera, Nimal J. (2006) Analytical and experimental investigation of the behaviour of a rollover protective structure. The Structural Engineer, 84(1), pp. 29-34.

879

Clegg, Richard (2001) A Fluid Flow Based Model to Predict Liquid Metal Induced Embrittlement Crack Propagation Rates. Engineering Fracture Mechanics, pp. 1777-1790.

Clegg, Richard & Jones, David (2003) Liquid Metal Embrittlement of Tensile Specimens of En19 Steel by Tin. Engineering Failure Analysis, 10, pp. 119-130.

Clegg, Richard, Parakala, Padmaja, & Wei, Mei (2001) Microscopic Features of Hydroxyapatite Coatings Deposited by a Modified Sol-Gel Technique. Journal of the Australasian Ceramic Society, pp. 103-108.

Clements, Adam, Drew, Michael, Krpan, Ivan, & Veeraraghavan, Madhu (2009) Can book-to-market and size be risk factors that predict economic growth in Asia's emerging economies? Finance India, 23(4), pp. 1213-1230.

Clements, Warren J., Miller, Lisa, Whitehouse, Sarah L., Graves, Stephen E., Ryan, Philip, & Crawford, Ross W. (2010) Early outcomes of patella resurfacing in total knee arthroplasty. Acta Orthopaedica, 81(1), pp. 108-113.

106

Clothier, Reece A., Baumeister, Richard, Brunig, Michael, Duggan, Andrew, Roberts, Jonathan, Walker, Rodney A., et al. (2011) The smart skies project. IEEE Aerospace and Electronic Systems Magazine. (In Press)

163

Clothier, Reece A., Fulton, Neale L., & Walker, Rodney A. (2008) Pilotless aircraft: the horseless carriage of the twenty-first century? Journal of Risk Research, 11(8), pp. 999-1023.

Clothier, Reece A., Palmer, Jennifer L., Walker, Rodney A., & Fulton, Neale L. (2011) Definition of an airworthiness certification framework for civil unmanned aircraft systems. Safety Science, 49(6), pp. 871-885.

226

Coetzee, J. & Yu, Y. (2008) Closed-form design equations for decoupling networks of small arrays. Electronics Letters, 44(25), pp. 1441-1442.

Coetzee, Jacob (2011) Dual-frequency decoupling networks for compact antenna arrays. International Journal of Microwave Science and Technology, 2011.

Coetzee, Jacob, Cordwell, James, Underwood, Elizabeth, & Waite, Shauna (2011) Single-layer decoupling networks for circulant symmetric arrays. IETE Technical Review, 28(3), pp. 232-239.

Coetzee, Jacob, Cordwell, James, & Waite, Shauna (2011) Design of compact coupled-line couplers. .

205

Coetzee, Jacob & Yu, Yantao (2009) Design of decoupling networks for circulant symmetric antenna arrays. IEEE Antennas and Wireless Propagation Letters, 8, pp. 291-294.

Coetzee, Jacob & Yu, Yantao (2008) New modal feed network for a compact monopole array with isolated ports. IEEE Transactions on Antennas and Propagation, 56(12), pp. 3872-3875.

Coetzee, Jacob & Yu, Yantao (2008) Port decoupling for small arrays by means of an eigenmode feed network. IEEE Transactions on Antennas and Propagation, 56(6), pp. 1587-1593.

Coffey, Felicity (2009) Increasing relevance and interest : teaching environmental and planning law to built environment students. Journal of Legal Affairs and Dispute Resolution in Engineering and Construction, 1(2), pp. 86-96.

Coffey, Vaughan (2002) Assessing organizational culture? value management to the rescue. Value Manager, 8(3), pp. 6-13.

Cohen, Michael & Roberts, Brian (2002) Enhancing Sustainable Development by Triple Value Adding to the Core Business of Government. Economic Development Quarterly, 16(2), pp. 127-137.

Coiacetto, Eddo & Baker, Douglas C. (2006) Public real estate development in Queensland: Local government as developers. Urban Policy and Research, 24(2), pp. 237-252.

443

Cokley, John & McAuliffe, Marisha (2011) Unexpected issues and solutions: Emerge from environmental manipulation strategy. Journal of Futures Studies, 15(4), pp. 159-180.

Conroy, Jon, Chawda, Mayur, Kaushal, Rishi, Whitehouse, Sarah, Crawford, Ross W., & English, Hugh (2009) Does use of a “rim cutter” improve quality of cementation of the acetabular component of cemented exeter total hip arthroplasty? Journal of Arthroplasty, 24(1), pp. 71-76.

299

Conroy, Jonathan L., Whitehouse, Sarah L., Graves, Stephen E., Pratt, Nicole L., Ryan, Philip, & Crawford, Ross W. (2008) Risk factors for revision for early dislocation in total hip arthroplasty. Journal of Arthroplasty, 23(6), pp. 867-872.

280

Cook, Jamie A., Chandran, Vinod, & Sridharan, Sridha (2007) Multi-Scale Representation for 3D Face Recognition. IEEE Transactions on Information Forensics and Security, 2(3), pp. 529-536.

Cork, Lennon R., Clothier, Reece A., Gonzalez, Luis F., & Walker, Rodney A. (2007) The Future of UAS: Standards, Regulations, and Operational Experiences. IEEE Aerospace and Electronic Systems Magazine, 22(11), pp. 29-44.

506

Corke, Peter (2007) MATLAB toolboxes : robotics and vision for students and teachers. IEEE Robotics & automation magazine, 14(4), pp. 16-17.

550

Corke, Peter (2005) The Machine Vision Toolbox : A MATLAB Toolbox for vision and vision-based control. IEEE Robotics and Automation Magazine, 12(4), pp. 16-25.

944

Corke, Peter (2004) An inertial and visual sensing system for a small autonomous helicopter. Journal of Robotic Systems, 21(2), pp. 43-51.

Corke, Peter (2007) A simple and systematic approach to assigning Denavit-Hartenberg Parameters. IEEE Transactions on Robotics, 23(3), pp. 590-594.

316

Corke, Peter, Jarvis, Ray, & Zelinsky, Alex (2004) Editorial : Special issue on the 10th International Symposium on Robotics Research. International Journal of Robotics Research, 23(2), p. 99.

Corke, Peter, Lobo, Jorge, & Dias, Jorge (2007) An introduction to inertial and visual sensing. The International Journal of Robotics Research, 26(6), pp. 519-535.

Corke, Peter, Peterson, Ron, & Rus, Daniela (2005) Localization and navigation assisted by cooperating networked sensors and robots. The International Journal of Robotics Research, 24(9), pp. 771-786.

Corke, Peter & Ridley, Peter (2003) Load haul dump vehicle kinematics and control. Transactions of the ASME: Journal of Dynamic Systems Measurement and Control, 125(1), pp. 54-59.

Corke, Peter & Ridley, Peter (2001) Steering Kinematics for a Center-Articulated Mobile Robot. IEEE Transactions on Robotics and Automation, pp. 215-218.

229

Corke, Peter & Sukkarieh, Salah (2006) Editorial : Special issue on field and service robotics. Journal of Field Robotics, 23(6/7), pp. 361-362.

Corke, Peter, Wark, Tim, Jurdak, Raja, Hu, Wen, Valencia, Philip, & Moore, Darren (2010) Environmental wireless sensor networks. Proceedings of the IEEE, 98(11), pp. 1903-1917.

Costain, Darren J. & Crawford, Ross W. (2009) Fresh-frozen vs. irradiated allograft bone in orthopaedic reconstructive surgery. Injury. (In Press)

732

Costain, Darren J., Whitehouse, Sarah L., Pratt, Nicole L., Graves, Stephen E., Ryan, Philip, & Crawford, Ross W. (2011) Perioperative mortality after hemiarthroplasty related to fixation method : a study based on the Australian Orthopaedic Association National Joint Replacement Registry. Acta Orthopaedica, 82(3), pp. 275-281.

Coulter, Chris, Crawford, Ross, Douglas, Joel, Sharma, Dinesh, & Weinrauch, Patrick (2008) Microbiology of infected arthroplasty: implications for empiric peri-operative antibiotics. Journal of Orthopaedic Surgery, 16(3), pp. 339-342.

Couzens, Alan, Skitmore, Martin, Thorpe, Tony, & McCaffer, Ronald (1996) Strategic Information Requirements In Contract Bidding: Framework for Development of a Decision Support System. Civil Engineering Systems, 13, pp. 121-139.

692

Covey, Geoff, Rainey, Thomas J., & Shore, Dennis (2006) The potential for bagasse pulping in Australia. Appita Journal, 59(1), pp. 17-22.

Cradduck, Lucy M. & Blake, Andrea (2011) State of Origin : Queensland Crown Leasehold - lessons from New South Wales. Journal of New Business Ideas and Trends, 9(2), pp. 1-10.

Crawford, John R., Izatt, Maree T., Adam, Clayton J., Labrom, Robert D., & Askin, Geoffrey N. (2006) A Prospective Assessment of SRS-24 Scores After Endoscopic Anterior Instrumentation for Scoliosis. Spine: an international journal for the study of the spine, 31(21), E817-E822.

150

Crawford, Ross (2008) Early outcomes and complications in obese patients undergoing total joint replacement. ANZ Journal of Surgery, 78(6), pp. 430-431.

Crawford, Ross, De Visser, Sally, & Pope, James (2008) Structural adaptations in compressed articular cartilage measured by diffusion tensor imaging. Osteoarthritis and Cartilage, 16(1), pp. 83-89.

Crawford, Ross, Edwards, Thomas, English, Hugh, & Tevelen, Gregory (2005) Stripping Torque as a Predictor of Successful Internal Facture Fixation. ANZ Journal of Surgery, 75(12), pp. 1096-1099.

Crawford, Ross, Gale, Lorne, Hargreaves, Douglas, Hills, Brian, & Yin Foo (Coller), Rebecca (2007) The Role of SAPL as a Boundary Lubricant in Prosthetic Joints. Tribology International, 40(4), pp. 601-606.

Crawford, Ross, Gudimetla, Prasad, Hills, Brian, & Oloyede, Adekunle (2004) Consolidation Responses of Delipidized Articular Cartilage. Clinical Biomechanics, 19, pp. 534-542.

Crawford, Ross, Hayes, David, Tevelen, Gregory, & Watts, Mark (2005) Central Versus Peripheral Tibial Screw Placement in Hamstring Anterior Cruciate Ligament Reconstruction: In Vitro Biomechanics. Arthroscopy: The Journal of Arthroscopy and Related Surgery, 21(6), pp. 703-706.

Crawford, Ross & Hills, Brian (2003) Normal and Prosthetic Synovial Joints are Lubricated by Surface-Active Phospholipid: A Hypothesis. Journal of Arthroplasty, 18(4), pp. 499-505.

Crawford, Ross W., Crawford, Scott, Sterling, Greg J., Potter, Julia M., & Koerbin, Gary L. (2003) The pharmacokinetics of Simplex-tobramycin bone cement. Journal of Bone and Joint Surgery: British Volume, 85-B(5), pp. 646-649.

Creedy, Garry D., Skitmore, Martin, & Wong, Johnny K.W. (2010) Evaluation of risk factors leading to cost overrun in delivery of highway construction projects. Journal of Construction Engineering and Management, 136(5), pp. 528-536.

314

Cretchley, Patricia & Mahalinga-Iyer, Ramasamy-Iyer (2009) COAST Maps: A simple visual tool for articulating key elements of the first-year learning experience within course development. e-Journal of Business Education & Scholarship of Teaching, 3(2), pp. 22-28.

Crisp, Jennifer & Birtwhistle, David (2005) System dynamics modelling: application to electricity transmission network asset management. Australian Journal of Electrical & Electronics Engineering, 2(3), pp. 263-272.

Crowther, Philip (1999) Design for Disassembly. BDP Environment Design Guide, November.

1,908

Crowther, Philip (2005) Design for Disassembly - Themes and Principles. BDP Environment Design Guide, 2005.

1,183

Crowther, Philip (2005) Don't Drop the Batton: Reclaiming a Knowledge of Construction. TAKE 4 - Collaboration and Coalition: Creating Architectural Knowledge in Contemporary Practice, pp. 51-59.

476

Crowther, Philip (2007) Drawing dialogues: Participatory design education. IDEA Journal, 2007, pp. 3-15.

131

Daddow, Therese & Skitmore, Martin (2005) Value Management in practice: an interview survey. The Australian Journal of Construction Economics and Building, 4(2), pp. 11-18.

1,193

Dai, C.Y., Zhang, G.P., & Yan, C. (2011) Size effects on tensile and fatigue behaviour of polycrystalline metal foils at the micrometer scale. Philosophical Magazine, 91(6), pp. 932-945.

Dainty, Andrew & Lingard, Helen (2006) Indirect Discrimination In Construction Organizations And The Impact On Women's Careers. Journal of Management in Engineering, 22(3), pp. 108-118.

Dale, Pat, Hayes, John, & Tong, Shilu (2005) Spatiotemporal Variation of Notified Barmah Forest Virus Infections in Queensland, Australia, 1993 - 2001. International Journal of Environmental Health Research, 15(2), pp. 89-98.

Daneshfar, Fatheme & Bevrani, Hassan (2010) Load–frequency control : a GA-based multi-agent reinforcement learning. IET Generation, Transmission & Distribution, 4(1), pp. 13-26.

Darcy, Greg & Mahendran, Mahen (2008) Development of a new cold-formed steel building system. Advances in Structural Engineering, 11(6), pp. 661-677.

488

Darmanis, Spyros N., Hubble, Matthew J. W., Howell, Jonathan R., Whitehouse, Sarah L., & Timperley, A. John (2012) Benefits of using modern cementing techniques in the acetabulum : the rim cutter. Journal of Orthopaedic Surgery, 20(3), pp. 316-321.

Dart, Barry C., Burnett, Paul C., Purdie, Nola M., Boulton-Lewis, Gillian M., Campbell, Jenny, & Smith, David (2000) Students’ conceptions of learning, the classroom environment and approaches to learning. The Journal of Educational Research, 93(4), pp. 262-270.

Das Gupta, Jishu (2011) A systematic study of MIMO-OFDM broadband channels in populated indoor environment. IETE Journal of Research, 57(2), pp. 132-137.

Das Gupta, Jishu, Howard, Srecko, & Howard, Angela (2006) Traffic behaviour of VoIP in a simulated access network. Proceedings of World Academy of Science, Engineering and Technology (PWASET), 18, pp. 189-194.

139

Das Gupta, Jishu, Suzuki, Hajime, & Ziri-Castro, Karla I. (2009) Effect of Pedestrian Movement on MIMO-OFDM Channel Capacity in an Indoor Environment. Antennas and Wireless Propagation Letters, IEEE.

150

Davies, Mark, Dunster, Kimble, & Jardine, Luke (2008) An experimental model for the measurement of inspired gas temperatures in ventilated neonates. Pediatric Pulmonology, 43(1), pp. 29-33.

Davies, Mark, Dunster, Kimble, Wilson, Katherine, & Colditz, Paul (2009) Perfluorocarbon dosing when starting partial liquid ventilation: haemodynamics and cerebral blood flow in preterm lambs. Neonatology: fetal and neonatal research, 97(2), pp. 144-153.

Davies, Mark, Dunster, Kimble, Wilson, Kathleen, & Colditz, Paul (2010) Effect of the dose volume of perfluorocarbon when starting partial liquid ventilation. Journal of Paediatrics and Child Health, 46(12), pp. 714-722.

Davis, Lloyd E. & Bunker, Jonathan M. (2011) Altering heavy vehicle air suspension dynamic forces by modifying air lines. International Journal of Heavy Vehicle Systems (IJHVS) I, 18(1), pp. 1-17.

Davis, Lloyd E. & Bunker, Jonathan M. (2009) Dynamic load sharing for heavy vehicles : a new metric. Road and Transport Research, 18(4), pp. 23-37.

226

Davis, Lloyd E., Karl, Charles, Cai, David, Bunker, Jonathan M., Germanchev, Anthony, Eady, Peter, et al. (2010) On-board mass monitoring of heavy vehicles : results of testing program. Road and Transport Research, 19(1), pp. 3-17.

Dawes, Les A. & Goonetilleke, Ashantha (2006) Using multivariate analysis to predict the behaviour of soils under effluent irrigation. Water, Air and Soil Pollution, 172(1-4), pp. 109-127.

499

Dawes, Les A. & Goonetilleke, Ashantha (2006) Using undisturbed columns to predict long term behaviour of effluent irrigated soils under field conditions. Australian Journal of Soil Research, 44(7), pp. 661-676.

315

Dawes, Les A. & Goonetilleke, Ashantha (2003) An investigation into the role of site and soil characteristics in on-site sewage treatment. Environmental Geology, 44(4), pp. 467-477.

967

Dawes, Les A., Goonetilleke, Ashantha, & Cox, Malcolm E. (2005) Assessment of physical and chemical properties of sub-tropical soil to predict long term effluent treatment potential. Soil and Sediment Contamination, 14(3), pp. 211-230.

1,475

Dawes, Les A. & Satherley, Shannon D. (2008) Sustainable futures by design : enriching the balance between engagement processes and outcomes. The Australasian Journal of Community Engagement, 2(3), pp. 28-37.

Dawood, Anwar, Visser, Stephen, & Williams, John (2003) FPGA Based Satellite Adaptive Image Compression System. Journal of Aerospace Engineering, 16(3), pp. 129-137.

Dawood, Anwar, Visser, Stephen, & Williams, John (2003) Reconfigurable Onboard Processing and Real-Time Remote Sensing. IEICE Transactions on Information and Systems, E86-D(5), pp. 819-829.

De Pellegrin, D. V., Torrance, A. A., & Haran, E. (2009) Wear mechanisms and scale effects in two-body abrasion. Wear, 266(1-2), pp. 13-20.

De Pellegrin, Dennis & Torrance, Andrew (2009) Abrasive surfaces measured by digital optical stereopsis. Advanced Materials Research, 76-78(N/A), pp. 465-470.

De Silva, Sandun S. & Thambiratnam, David (2011) Vibration characteristics of concrete-steel composite floor structures. ACI Structural Journal, 108(6), pp. 1-9.

193

De Silva, Sandun S. & Thambiratnam, David P. (2009) Dynamic characteristics of steel-deck composite floors under human induced loads. International Journal of Computers & Structures. (In Press)

481

Dean, David B. & Sridharan, Sridha (2010) Dynamic visual features for audio-visual speaker verification. Computer Speech and Language, 24(2), 136 - 149.

Demirbilek, Nur & Ecevit, Ahmet (2001) Solar Houses. Enerji Dunyasi, Dunya Enerji Konseyi Turk Milli Komitesi Bulteni (World Energy Council Turkish National Committee Bulletin), pp. 42-47.

Demirbilek, Nur, Yalciner, Ugur G., Inanici, Mehlika N., Ecevit, Ahmet, & Demirbilek, Oya S. (2000) Energy conscious dwelling design for Ankara. Building and Environment, 35(1), pp. 33-40.

610

Demirbilek, Nur, Yalciner, Ugur. G, Ecevit, Ahmet, Sahmali, Erkan, & Inanici, Mehlika (2003) Analysis of the thermal performance of a building design located at 2465m : Antalya-Saklikent National Observatory guesthouse. Building and Environment, 38(1), pp. 177-184.

381

Demirbilek, Nur & Yener, Cengis (1996) A Proposal for "Correction Values" for Winter Outdoor Design Temperatures. Solar Energy, 57(2), pp. 111-116.

784

Deng, S.T., Diao, H., Chen, Y.L., Yan, C., Zhang, H.F., Wang, A.M., et al. (2010) Metallic glass fiber-reinforced Zr-based bulk metallic glass. Scripta Materialia, 64(1), pp. 85-88.

Denman, Simon, Lamb, Todd, Fookes, Clinton B., Chandran, Vinod, & Sridharan, Sridha (2008) Multi-spectral fusion for surveillance systems. Computers and Electrical Engineering.

Denman, Simon P., Chandran, Vinod, & Sridharan, Sridha (2007) An adaptive optical flow technique for person tracking systems. Pattern Recognition Letters, 28(10), pp. 1232-1239.

574

Deriche, Mohamed, Ghaemmaghami, Sharokh, & Sridharan, Sridha (2003) Interpolative Coding of Speech Parameters Using Hierarchical Temporal Decomposition. Digital Signal Processing, 13(2003), pp. 433-456.

Desai, Gaurang (2008) An activity theory framework for industrial design. Journal of Design Research, 7(3), pp. 304-316.

Detta, Nicola, Brown, Toby D., Edin, Fredrik K., Albrecht, Krystyna, Chiellini, Federica, Chiellini, Emo, et al. (2010) Melt electrospinning of polycaprolactone and its blends with poly(ethylene glycol). Polymer International, 59(11), pp. 1558-1562.

Dettling, Michael, Gentilello, Larry, Kox, Wolfgang, Mann, Karl, Mentz, Henriette, Muller, Christian, et al. (2004) Gender Differences in Performance of a Computerized Version of the Alcohol Use Disorders Identification Test in Subcritically Injured Patients Who Are Admitted to the Emergency Department. Alcoholism: Clinical and Experimental Research, 28(11), pp. 1693-1701.

Dewadasa, Jalthotage Manjula Dinesh, Ghosh, Arindam, Ledwich, Gerard, & Wishart , Michael (2011) Fault isolation in distributed generation connected distribution networks. IET Generation, Transmission and Distribution, 5(10), pp. 1053-1061.

213

Dhanasekar, M., Gurung, N., McSweeney, T., & Radampola, S. (2008) Evaluation of the properties of railway capping layer soil. Computers and Geotechnics, 35(5), pp. 719-728.

Dhanasekar, Manicka & Bayissa, Wirtu (2011) Performance of square and inclined insulated rail joints based on field strain measurements. Proceedings of the Institution of Mechanical Engineers, Part F : Journal of Rail and Rapid Transit, pp. 1-15.

Dhanasekar, Manicka & Haider, Waheed (2011) Effect of spacing of reinforcement on the behaviour of partially grouted masonry shear walls. Advances in Structural Engineering, 14(2), pp. 281-294.

188

Diao, H., Yan, C., Bell, J. M., Lu, L., Zhang, G. P., Karba, S., et al. (2010) Compressive behaviour of nanocrystallilne Mg-5%Al alloys. Modern Physics Letters B. (In Press)

102

Diao, Hui (2008) Bonding of aluminum alloy by hot-dipping tin coating. Advanced Materials Research, 32, pp. 93-98.

110

Dias, Jorge, Vinzce, Markus, Corke, Peter, & Lobo, Jorge (2007) Editorial : Special Issue : 2nd Workshop on Integration of Vision and Inertial Sensors. The International Journal of Robotics Research, 26(6), pp. 515-518.

Doherty-Bigara, Patrice, Groombridge, Paul, & Oloyede, Adekunle (2003) Development and Implementation of Visual Feedback Technology in Automotive Windscreen Manufacture. Journal of Materials Processing Technology, 139, pp. 357-361.

Dolamune Kankanamge, Nirosha & Mahendran, Mahen (2010) Mechanical properties of cold-formed steels at elevated temperatures. Thin-Walled Structures, 49(1), pp. 26-44.

Dombrowski, Christian, Song, Shu Jun, Chuan, Peiying, Lim, Xinhong, Susanto, Evelyn, Sawyer, Amber A., et al. (2009) Heparan sulfate mediates the proliferation and differentiation of rat mesenchymal stem cells. Stem Cells and Development, 18(4), pp. 661-670.

Donnet, Timothy, Keast, Robyn L., & Walker, Arron R. (2011) Fitting airport privatisation to purpose : aligning governance, time and management focus. European Journal of Transport and Infrastructure Research, 11(2), pp. 98-114.

Doocey, Jacinta, Ke, Jin, Lee, Winson, Li, Jian, Long, Xing, Meng, Qing-Gong, et al. (2008) Regulation of HAS expression in human synovial lining cells of TMJ by IL-1 beta. Archives of Oral Biology, 53(1), pp. 60-65.

Dorji, Jigme & Thambiratnam, David P. (2009) Modelling and analysis of infilled frame structures under seismic loads. The Open Construction & Building Technology Journal, 3.

Dowling, Jason A. (2005) Artificial human vision. Expert Review of Medical Devices, 2(1), pp. 73-85.

Drew, Derek & Skitmore, Martin (1997) The effect of contract type and contract size on competitiveness in construction contract bidding. Construction Management and Economics, 15(5), pp. 469-489.

1,673

Drew, Derek S., Ho, Liwina C.Y., & Skitmore, Martin (2001) Analysing a consultant's competitiveness in two envelope fee tendering. Construction Management and Economics, 19(5), pp. 503-510.

478

Drew, Derek S., Lo, Hing Po, & Skitmore, Martin (2001) The effect of client and type and size of construction work on a contractor's bidding strategy. Building and Environment, 36(3), pp. 393-406.

1,788

Drew, Derek S. & Skitmore, Martin (1992) Competitiveness in bidding: a consultant's perspective. Construction Management and Economics, 10(3), pp. 227-247.

671

Drew, Derek S. & Skitmore, Martin (1993) Prequalification and c-competitiveness. OMEGA: International Journal of Management Science, 21(3), pp. 363-376.

705

Drew, Derek S. & Skitmore, Martin (2006) Testing Vickery's revenue equivalence theory in construction auctions. Journal of Construction Engineering and Management, 132(4), pp. 425-428.

416

Drew, Derek S. & Skitmore, Martin (2003) The analysis of pre-tender building price forecasting performance: A case study. Engineering Construction and Architectural Management, 10(1), pp. 36-42.

467

Drew, Simon C., Silva, Pujitha, Crozier, Stuart, & Pearcy, Mark J. (2004) A diffusion and T2 relaxation MRI study of the ovine lumbar intervertebral disc under compression in vitro. Physics in Medicine and Biology, 49(16), pp. 3585-3592.

Drogemuller, Robin (2009) Can B.I.M be civil? Queensland Roads, pp. 47-55.

594

Du, Bing, Maeder, Anthony, & Moody, Miles (2005) A New Approach on Error Resilient Video Coding for Live Video Communication. International Journal of Innovative Computing, Information and Control, 1(4), pp. 701-713.

Du, Zhibin, Chen, Jiang, Yan, Fuhua, & Xiao, Yin (2009) The effects of Simvastatin on bone healing around titanium implants in osteoporotic rats. Clinical Oral Implants Research, 20(2), pp. 145-150.

269

Duan, Guang-Hong, Ma, Lin, Mathew, Joseph, & Wu, Ruirong (2002) Optimal Operation Planning using Fuzzy Petri Nets with Resource Constraints. International Journal of Computer Integrated Manufacturing, 15(1), pp. 28-36.

Duan, Mei & Mahendran, Mahen (2003) Large Deflection Analysis of Skew Plates using Hybrid/Mixed Finite Element Method. Computers and Structures, 81, pp. 1415-1424.

Duda, Georg N., Epari, Devakara R., Babst, Reto, Lambert, Simon, Matthys, Romano, & Südkamp, Norbert (2007) Mechanical evaluation of a new minimally invasive device for stabilization of proximal humeral fractures in elderly patients : a cadaver study. Acta Orthopaedica, 78(3), p. 430.

Duley, Walt, Hu, Anming, Lu, Q, & Rybachuk, Maksym (2008) Femtosecond pulsed laser deposition and optical properties of diamond-like amorphous carbon films embedded with sp-bonded carbon chains. Diamond and Related Materials, 17(7-10), pp. 1643-1646.

Dunbabin, M. & Corke, Peter (2006) Autonomous excavation using a rope shovel. Journal of Field Robotics, 23(6-7), pp. 379-394.

Duncan, Will W., Hubble, Matthew J., Howell, Jonathan R., Whitehouse, Sarah L., Timperley, A. John, & Gie, Graham A. (2009) Revision of the cemented femoral stem using a cement-in-cement technique. Journal of Bone and Joint Surgery (Britain volume), 91(5), pp. 577-582.

Dunlop, Scott, Dunster, Kimble, Fraser, John, Hough, Judy, Riedel, Thomas, & Schibler, Andreas (2006) Electrical Impedance Tomography in Extremely Prematurely Born Infants and During High Frequency Oscillatory Ventilation Analyzed in the Frequency Domain. Physiological Measurement, 27(11), pp. 1151-1165.

Dunster, Kimble, Fitzgibbon, John, Fraser, John, Riedel, Thomas, & Schibler, Andreas (2006) Effect of Smoke Inhalation on Viscoelastic Properties and Ventilation Distribution in Sheep. Journal of Applied Physiology, 101(3), pp. 763-770.

Dunster, Kimble R., Davies, Mark W., & Fraser, John F. (2006) An advanced expiratory circuit for the recovery of perfluorocarbon liquid from non-saturated perfluorocarbon vapour during partial liquid ventilation: an experimental model. BioMedical Engineering OnLine, 5(7).

253

Dunster, Kimble R., Davies, Mark W., & Fraser, John F. (2007) The use of chilled condensers for the recovery of perfluorocarbon liquid in an experimental model of perfluorocarbon vapour loss during neonatal partial liquid ventilation. BioMedical Engineering OnLine, 6(19).

285

Duong, Thuong T. & Skitmore, Martin (2003) Female project managers' workplace problems: a survey. Journal of Women and Minorities in Science and Engineering, 9(2).

952

Durmaz, Bahar, Platt, Stephen, & Yigitcanlar, Tan (2010) Creative, culture tourism and place-making : Istanbul and London film industries. International Journal of Culture, Tourism and Hospitality Research, 4(3), pp. 198-213.

179

Durmaz, Bahar, Yigitcanlar, Tan, & Velibeyoglu, Koray (2008) Creative cities and the film industry: Antalya's transition to a Eurasian film centre. The Open Urban Studies Journal, 1, pp. 1-10.

542

Dusha, Damien & Mejias, Luis (2012) Error analysis and attitude observability of a monocular GPS/visual odometry integrated navigation filter. The International Journal of Robotics Research, 31(6), pp. 714-737.

Dusha, Damien, Mejias, Luis, & Walker, Rodney A. (2011) Fixed-wing attitude estimation using temporal tracking of the horizon and optical flow. Journal of Field Robotics, 28(3), pp. 355-372.

Duvarci, Yavuz & Yigitcanlar, Tan (2007) Integrated Modeling Approach for the Transportation Disadvantaged. Journal of Urban Planning and Development, 133(3), pp. 188-200.

231

Duvarci, Yavuz, Yigitcanlar, Tan, Alver, Yalcin, & Mizokami, Shoshi (2011) The variant concept of transportation disadvantaged : evidence from Aydin, Turkey and Yamaga, Japan. Journal of Urban Planning and Development, 137(1), pp. 82-90.

East, Andrew John & Dawes, Les A. (2009) Homegardening as a panacea : a case study of South Tarawa. Asia Pacific Viewpoint, 50(3), pp. 338-352.

355

Egodawatta, Prasanna, Miguntanna, Nadeeka Sajeewani, & Goonetilleke, Ashantha (2012) Impact of roof surface runoff on urban water quality. Water Science and Technology, 66(7), pp. 1527-1533.

Egodawatta, Prasanna K. & Goonetilleke, Ashantha (2008) Understanding urban road surface pollutant wash-off and underlying physical processes using simulated rainfall. Water Science and Technology, 57(8), pp. 1241-1246.

Egodawatta, Prasanna K., Thomas, Evan C., & Goonetilleke, Ashantha (2009) Understanding the physical processes of pollutant build-up and wash-off on roof surfaces. Science of the Total Environment, 407(6), pp. 1834-1841.

207

Egodawatta, Prasanna K., Thomas, Evan C., & Goonetilleke, S. Ashantha (2007) Mathematical interpretation of pollutant wash-off from urban road surfaces using simulated rainfall. Water Research, 41(13), pp. 3025-3031.

434

Ekaputra, Andrew Krishna, Prestwich, Glenn, Cool, Simon, & Hutmacher, Dietmar (2011) The three-dimensional vascularization of growth factor-releasing hybrid scaffold of poly (e{open}-caprolactone)/collagen fibers and hyaluronic acid hydrogel. Biomaterials, 32(32), pp. 8108-8117.

Ekaputra, Andrew Krishna, Prestwich, Glenn D., Cool, Simon M., & Hutmacher, Dietmar W. (2008) Combining electrospun scaffolds with electrosprayed hydrogels leads to three-dimensional cellularization of hybrid constructs. Biomacromolecules, 9(8), pp. 2097-2103.

El-Higzi, Faiza (2002) Examining International Trade Flows for Australian Construction Companies. International Journal of Social Economics, 29(6), pp. 491-507.

El-Higzi, Faiza (2002) Foreign Market Selection Factors in the Australian Construction Services Sector. The Australian Journal of Construction Economics and Building, 2(1), pp. 107-120.

Eldridge, Jonathan D. J., Smith, Evert J., Hubble, Matthew J., Whitehouse, Sarah L., & Learmonth, Ian D. (1997) Massive early subsidence following femoral impaction grafting. Journal of Arthroplasty, 12(5), pp. 535-540.

180

162

Elgar, S., Herbers, T.H.C., Chandran, V., & Guza, R.T. (1995) Higher-order spectral analysis of nonlinear ocean surface gravity waves. Journal of Geophysical Research, 100(C3), pp. 4977-4983.

116

Elgar, Steve & Chandran, Vinod (1993) Higher order spectral analysis of Chua's circuit. IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, 40(10), pp. 689-692.

Elgar, Steve, Vanhoff, Barry

Export as	RSS 1.0 Atom RSS 2.0