# Browse By Person: Gu, YuanTong

Up a level |

Group by: Item Type | Date

Number of items:

**204**.## Book

Liu, Gui-Rong & Gu, YuanTong (2005)

*An introduction to meshfree methods and their programming.*1, 1. Springer, Berlin.## Book Chapter

Gu, YuanTong & Zhan, Haifei (2013) Numerical Characterization of Nanowires. In Li, Shaofan & Gao, Xin-Lin (Eds.)

*Handbook of Micromechanics and Nanomechanics.*Pan Stanford Publishing, USA, pp. 869-916.## Journal Article

Helambage, Chaminda Prasad Karunasena, Brown, Richard J., Gu, YuanTong, & Senadeera, Wijitha (2015) Application of meshfree methods to numerically simulate microscale deformations of different plant food materials during drying.

*Journal of Food Engineering*,*146*, pp. 209-226.Sauret, Emilie & Gu, YuanTong (2014) Three-dimensional off-design numerical analysis of an organic Rankine cycle radial-inflow turbine.

*Applied Energy*,*135*, pp. 202-211.Zhan, Haifei, Zhang, Yingyan, Bell, John M., Mai, Yiu-Wing, & Gu, YuanTong (2014) Structure-mediated thermal transport of monolayer graphene allotropes nanoribbons.

*Carbon*,*77*, pp. 416-423.Zhang, Ying-Yan, Pei, Qing-Xiang, Mai, Yiu-Wing, & Gu, Yuan-Tong (2014) Temperature and strain-rate dependent fracture strength of graphynes.

*Journal of Physics D: Applied Physics*,*47*(42), p. 425301.Thiyahuddin, Izzat, Thambiratnam, David, & Gu, YuanTong (2014) Effect of joint mechanism on vehicle redirectional capability of water-filled road safety barrier systems.

*Accident Analysis & Prevention*,*71*, pp. 60-71.Thiyahuddin, Izzat, Gu, YuanTong, Thambiratnam, David, & Thilakarathna, Herath Mudiyanselage Indika (2014) Impact and energy absorption of portable water-filled road safety barrier system fitted with foam.

*International Journal of Impact Engineering*,*72*, pp. 26-39.Helambage, Chaminda Prasad Karunasena, Senadeera, Wijitha, Gu, YuanTong, & Brown, Richard J. (2014) A coupled SPH-DEM model for micro-scale structural deformations of plant cells during drying.

*Applied Mathematical Modelling*,*38*(15-16), pp. 3781-3801. 1

1

Saha, Suvash C. & Gu, YuanTong (2014) Transient air flow and heat transfer in a triangular enclosure with a conducting partition.

*Applied Mathematical Modelling*,*38*(15-16), pp. 3879-3887.Zhan, Haifei, Gu, YuanTong, Yan, Cheng, & Yarlagadda, Prasad K. (2014) Tensile properties of Si nanowires with faulted stacking layers.

*Science of Advanced Materials*,*6*(7), pp. 1489-1492. 74

Li, Tong, Gu, YuanTong, & Oloyede, Adekunle (2014) Molecular sliding filament model for muscular contraction based on multiscale investigation.

*Science of Advanced Materials*,*6*(7), pp. 1346-1350. 51

Hu, Dean, Long, Ting, Xiao, Yihua, Han, Xu, & Gu, YuanTong (2014) Fluid-structure interaction analysis by coupled FE-SPH model based on a novel searching algorithm.

*Computer Methods in Applied Mechanics and Engineering*,*276*, pp. 266-286.Helambage, Chaminda, Senadeera, Wijitha W., Brown, Richard J., & Gu, YuanTong (2014) Simulation of plant cell shrinkage during drying : A SPH–DEM approach.

*Engineering Analysis with Boundary Elements*,*44*, pp. 1-18. 1

Li, Tong, Hu, Dean, Yarlagadda, Prasad K., & Gu, YuanTong (2014) Physical mechanism of the compressive response of F-actin networks : significance of crosslinker unbinding events.

*Theoretical and Applied Mechanics Letters*,*4*(5), 051006-1. 4

Saleem, M., Hossain, M.A., Saha, S.C., & Gu, Y.T. (2014) Heat transfer analysis of viscous incompressible fluid by combined natural convection and radiation in an open cavity.

*Mathematical Problems in Engineering*,*2014*(412480). 31

Zhang, Baocheng, Li, Tong, Zhan, Haifei, & Gu, Y.T. (2014) Impact of the piston secondary motion on its slap force.

*Applied Mechanics and Materials*,*553*, pp. 582-587.Li, Tong, Gu, YuanTong, & Zhang, Bao Cheng (2014) Mechanics of microfilaments networks : a cross-scales study.

*Applied Mechanics and Materials*,*553*, pp. 310-315. 28

Wei, Ye, Zhan, Haifei, Xia, Kang, Zhang, Wendong, Sang, Shengbo, & Gu, YuanTong (2014) Resonance of graphene nanoribbons doped with nitrogen and boron : a molecular dynamics study.

*Beilstein Journal of Nanotechnology*,*5*, pp. 717-725. 10

Zhang, Baocheng, Zhan, Haifei, & Gu, YuanTong (2014) A general approach to tune the vibration properties of the mounting system in the high-speed and heavy-duty engine.

*Journal of Vibration and Control*. (In Press)Sojoudi, Atta, Mazloomi, Ali, Saha, Suvash C., & Gu, YuanTong (2014) Similarity solutions for flow and heat transfer of non-Newtonian fluid over a stretching surface.

*Journal of Applied Mathematics*,*2014*, pp. 718319-1. 24

Nguyen, Trung Dung & Gu, YuanTong (2014) Exploration of mechanisms underlying the strain-rate-dependent mechanical property of single chondrocytes.

*Applied Physics Letters*,*104*, p. 183701. 29

1

Karunasena, H. C. P., Senadeera, W., Brown, R. J., & Gu, Y. T. (2014) A meshfree model for plant tissue deformations during drying.

*ANZIAM Journal*,*55*, C110-C137. 42

Thiyahuddin, Izzat, Gu, YuanTong, Gover, Rory, & Thambiratnam, David (2014) Fluid-structure interaction analysis of full scale vehicle-barrier impact using coupled SPH-FEA.

*Engineering Analysis with Boundary Elements*,*42*, pp. 26-36.Saha, Suvash C., Sauret, Emilie, & Gu, YuanTong (2014) Magnetic convection heat transfer in an open ended enclosure filled with paramagnetic fluids.

*Applied Mechanics and Materials*,*553*, pp. 109-114. 10

Thiyahuddin, Izzat, Gu, YuanTong, & Thambiratnam, David (2014) Revolute joint approach to model joint mechanism in water-filled road safety barriers.

*Applied Mechanics and Materials : Advances in Computational Mechanics*, pp. 763-768. 42

Zhan, Haifei, Wei, Ye, & Gu, YuanTong (2014) Tuneable resonance properties of graphene by nitrogen-dopant.

*Applied Mechanics and Materials*,*553*, pp. 3-9. 31

1

Liu, HuaShu, Ma, Lin, & Gu, YuanTong (2014) Numerical investigation of mechanical and thermal dynamic properties of the industrial transformer.

*International Journal of Computational Methods (IJCM)*,*11*(Supp 1), p. 1344012. 55

Li, Tong & Gu, YuanTong (2014) A stochastic thermostat algorithm for coarse-grained thermomechanical modeling of large-scale soft matters : theory and application to microfilaments.

*Journal of Computational Physics*,*263*, pp. 177-184.de Silva, Suchitra, Du, Aijun, Senadeera, Wijitha, & Gu, YuanTong (2014) Neutral and charged boron-doped fullerenes for CO2 adsorption.

*Beilstein Journal of Nanotechnology*,*5*, pp. 413-418. 19

Helambage, Chaminda Prasad Karunasena, Senadeera, Wijitha, Brown, Richard J., & Gu, YuanTong (2014) A particle based model to simulate microscale morphological changes of plant tissues during drying.

*Soft Matter*,*10*(29), pp. 5249-5268. 2

1

Xia, Kang, Zhan, Haifei, Wei, Ye, & Gu, YuanTong (2014) Tensile properties of a boron/nitrogen-doped carbon nanotube–graphene hybrid structure.

*Beilstein Journal of Nanotechnology*,*5*, pp. 329-336. 16

Capasso, Andrea, Placidi, E., Zhan, Haifei, Perfetto, Enrico, Bell, John M., Gu, YuanTong, et al. (2014) Graphene ripples generated by grain boundaries in highly ordered pyrolytic graphite.

*Carbon*,*68*, pp. 330-336. 1

Hu, Dean, Wang, Yigang, Liu, Gui-Rong, Li, Tong, Han, Xu, & Gu, YuanTong (2014) A sub‒domain smoothed Galerkin method for solid mechanics problems.

*International Journal for Numerical Methods in Engineering*,*98*(11), pp. 781-798. 1

Helambage, Chaminda Prasad Karunasena, Hesami, Parva, Senadeera, Wijitha, Gu, YuanTong, Brown, Richard J., & Oloyede, Adekunle (2014) Scanning electron microscopic study of microstructure of Gala apples during hot air drying.

*Drying Technology : An International Journal*,*32*(4), pp. 455-468. 4

Abbasi, Waqas Sarwar, Islam, Shams-Ul, Saha, Suvash C., Gu, YuanTong, & Ying, Zhou Chao (2014) Effect of Reynolds numbers on flow past four square cylinders in an in-line square configuration for different gap spacings.

*Journal of Mechanical Science and Technology*,*28*(2), pp. 539-552. 10

Hu, De-An, Wang, Yi-Gang, Li, Yang-Yang, Han, Xu, & Gu, Yuan-Tong (2014) A meshfree-based local Galerkin method with condensation of degree of freedom for elastic dynamic analysis.

*Acta Mechanica Sinica*,*30*(1), pp. 92-99.Li, Tong, Oloyede, Adekunle, & Gu, YuanTong (2014) Adhesive characteristics of low dimensional carbon nanomaterial on actin.

*Applied Physics Letters*,*104*(2), 0237021-0237024. 83

Zhan, Haifei, Zhang, Yingyan, Bell, John M., & Gu, YuanTong (2014) Thermal conductivity of Si nanowires with faulted stacking layers.

*Journal of Physics D: Applied Physics*,*47*(1), pp. 1-5. 1

1

Liu, Qingxia, Liu, Fawang, Turner, Ian, Anh, Vo, & Gu, YuanTong (2014) A RBF meshless approach for modeling a fractal mobile/immobile transport model.

*Applied Mathematics and Computation*,*226*, pp. 336-347.Zhan, Haifei, Gu, YuanTong, Yan, Cheng, & Yarlagadda, Prasad K. (2014) Bending properties of Ag nanowires with pre-existing surface defects.

*Computational Materials Science*,*81*, pp. 45-51.Hu, Dean, Wang, Yigang, Li, Yangyang, Gu, YuanTong, & Han, Xu (2014) A meshfree-based local Galerkin method with condensation of degree of freedom.

*Finite Elements in Analysis and Design*,*78*, pp. 16-24. 1

Nguyen, Trung Dung, Gu, YuanTong, Oloyede, Adekunle, & Senadeera, Wijitha (2014) Analysis of strain-rate dependent mechanical behavior of single chondrocyte : a finite element study.

*International Journal of Computational Methods*,*11*(Supp1), p. 1344005. 2

Nguyen, Trung Dung & Gu, YuanTong (2014) Determination of strain-rate-dependent mechanical behavior of living and fixed osteocytes and chondrocytes using atomic force microscopy and inverse finite element analysis.

*Journal of Biomechanical Engineering*,*136*(10), 101004-1---8.Zhuang, Pinghui, Liu, Fawang, Turner, Ian, & Gu, YuanTong (2014) Finite volume and finite element methods for solving a one-dimensional space-fractional Boussinesq equation.

*Applied Mathematical Modelling*,*38*(15 - 1), pp. 3860-3870.Li, Tong, Gu, YuanTong, Oloyede, Adekunle, & Yarlagadda, Prasad K. (2014) Molecular investigation of the mechanical properties of single actin filaments based on vibration analyses.

*Computer Methods in Biomechanics and Biomedical Engineering*,*17*(6), pp. 616-622. 21

2

Nguyen, Trung Dung, Oloyede, Adekunle, & Gu, YuanTong (2014) Stress relaxation analysis of single chondrocytes using porohyperelastic model based on AFM experiments.

*Theoretical and Applied Mechanics Letters*,*4*(5), 054001.Zhan, Haifei, Zhang, Gang, Bell, John M., & Gu, YuanTong (2014) Thermal conductivity of configurable two-dimensional carbon nanotube architecture and strain modulation.

*Applied Physics Letters*,*105*, p. 153105. 5

Saha, Suvash C., Khan, Masud, & Gu, YuanTong (2014) Unsteady buoyancy driven flows and heat transfer through coupled thermal boundary layers in a partitioned triangular enclosure.

*International Journal of Heat and Mass Transfer*,*68*, pp. 375-382.Sojoudi, Atta, Saha, Suvash C., Khezerloo, Marzieh, & Gu, Y. T. (2014) Unsteady natural convection within a porous enclosure of sinusoidal corrugated side walls.

*Transport in Porous Media*. (In Press)Shirmohammadi, Maryam, Yarlagadda, Prasad K.D.V., & Gu, YuanTong (2014) A constitutive model for mechanical response characterization of pumpkin peel and flesh tissues under tensile and compressive loadings.

*Journal of Food Science and Technology*. (In Press)Zhan, Haifei, Zhang, Yingyan, Bell, John M., Zhang, Baocheng, & Gu, YuanTong (2013) Tailoring the resonance of bilayer graphene sheets by interlayer sp3 bonds.

*The Journal of Physical Chemistry Part C: Nanomaterials and Interfaces*,*118*(1), pp. 732-739.Li, Tong, Oloyede, Adekunle, & Gu, YuanTong (2013) F-actin crosslinker : a key player for the mechanical stability of filopodial protrusion.

*Journal of Applied Physics*,*114*(21). 35

2

1

Sun, Xiao-Yu, Li, ChunYang, Gu, YuanTong, & Feng, Xi-Qiao (2013) Mechanical properties of bioinspired bicontinuous nanocomposites.

*Computational Materials Science*,*80*, pp. 71-78.Sauret, Emilie, Saha, Suvash C., & Gu, YuanTong (2013) Numerical simulations of particle deposition in metal foam heat exchangers.

*International Journal of Computational Materials Science and Engineering*,*2*(3&4), p. 1350016.Zhan, Haifei, Xia, Kang, & Gu, YuanTong (2013) Tensile properties of graphene nanotube hybrid structures : a molecular dynamics study.

*International Journal of Computational Materials Science and Engineering*,*02*(3n04), p. 1350020.Paul, Sreebash C., Saha, Suvash C., & Gu, YuanTong (2013) Effect of an adiabatic fin on natural convection heat transfer in a triangular enclosure.

*American Journal of Applied Mathematics*,*1*(4), pp. 78-83. 21

Malekani, Javad, Yarlagadda, Prasad K.D.V., Schmutz, Beat, Gu, YuanTong, & Schuetz, Michael (2013) How to increase the accuracy of analysis and reduce the computational time in ANSYS in the case of deformation study of orthopedic bone plates.

*Advanced Materials Research*,*834-836*, pp. 1592-1600. 257

Islam, Shams Ul, Abbasi, Waqas Sarwar, Saha, Suvash C., Ying, Zhou Chao, & Gu, YuanTong (2013) Numerical simulation of flow past four square cylinders in an in-line square configuration using the Lattice Boltzmann method for various separation ratios.

*KSCE Journal of Civil Engineering*. (In Press)Sojoudi, Atta, Saha, Suvash C., Gu, YuanTong, & Hossain, Md. Anwar (2013) Steady natural convection of non-Newtonian power-law fluid in a trapezoidal enclosure.

*Advances in Mechanical Engineering*,*2013*(653108). 17

Shirmohammadi, Maryam, Yarlagadda, Prasad K.D.V., Gu, YuanTong, Gudimetla, Prasad, & Kosse, Vladis (2013) Tensile properties of pumpkin peel and flesh tissue and review of current testing methods.

*Transactions of the ASABE*,*56*(4), pp. 1521-1527. 94

Thiyahuddin, Izzat, Thambiratnam, David, Gu, YuanTong, & Gover, Rory (2013) Safety enhancement of water-filled road safety barrier using interaction of composite materials.

*International Journal of Technology*,*4*(3), pp. 259-268. 66

Li, Tong, Gu, YuanTong, Feng, XiQiao, Yarlagadda, Prasad K., & Oloyede, Adekunle (2013) Hierarchical multiscale model for biomechanics analysis of microfilament networks.

*Journal of Applied Physics*,*113*(19), pp. 194701-194707. 99

3

1

Bian, Jian, Gu, YuanTong, & Murray, Martin H. (2013) A dynamic wheel-rail impact analysis of railway track under wheel flat by Finite Element Analysis.

*Vehicle System Dynamics*,*51*(6), pp. 784-797. 93

1

Xu, Xu, Gu, YuanTong, & Liu, Gui-Rong (2013) A hybrid smoothed finite element method (H-SFEM) to solid mechanics problems.

*International Journal of Computational Methods*,*10*(134001), pp. 1-17. 167

2

Zhang, Ying Yan & Gu, YuanTong (2013) Mechanical properties of graphene : effects of layer number, temperature and isotope.

*Computational Materials Science*,*71*(1), pp. 197-200. 81

5

4

Hasan, Muhammad Noman, Saha, Suvash C., & Gu, YuanTong (2013) Mixed convection over a horizontal plate with streamwise non-uniform surface temperature distribution.

*Journal of Heat Transfer*,*135*(7), 072501.Bian, Jian, Gu, YuanTong, & Murray, Martin Howard (2013) Numerical study of impact forces on railway sleepers under wheel flat.

*Advances in Structural Engineering*,*16*(1), pp. 127-134. 285

2

Malekani, Javad, Schmutz, Beat, Gudimetla, Prasad, Gu, YuanTong, Schuetz, Michael, & Yarlagadda, Prasad K.D.V. (2013) Studies on bending limitations for the optimal fit of orthopaedic bone plates.

*Advanced Materials Research*,*602-604*, pp. 1181-1185. 386

1

Xu, Xu, Luo, Jiawei, & Gu, YuanTong (2012) Collective dynamics and control of a 3-D small-world network with time delays.

*International Journal of Bifurcation and Chaos in Applied Sciences and Engineering*,*22*(11). 2

1

Zhan, Haifei & Gu, YuanTong (2012) Surface effects on the dual-mode vibration of <110> silver nanowires with different cross-sections.

*Journal of Physics D : Applied Physics*,*45*(46). 113

2

Thiyahuddin, Izzat, Gu, YuanTong, Thambiratnam, David, & Gudimetla, Prasad (2012) Impact and energy absorption of road safety barriers by coupled SPH/FEM.

*International Journal of Protective Structures*,*3*(3), pp. 257-274. 308

1

Zhan, Haifei, Gu, YuanTong, & Park, Harold S. (2012) Beat phenomena in metal nanowires, and their implications for resonance-based elastic property measurements.

*Nanoscale*,*4*(21), pp. 6779-6785. 91

8

7

Saha, Suvash C. & Gu, YuanTong (2012) Prandtl number scaling of natural convection of the flow on an inclined at plate due to uniform surface heat flux.

*The ANZIAM Journal*,*53*, C387-C403. 37

Fu, Qiang, Zhan, Haifei, & Gu, YuanTong (2012) Atomistic investigations of single-crystal silicon with pre-existing defects.

*Advanced Science Letters*,*14*(1), pp. 165-170.Hasan, Muhammad N., Saha, Suvash C., & Gu, YuanTong (2012) Unsteady natural convection within a differentially heated enclosure of sinusoidal corrugated side walls.

*International Journal of Heat and Mass Transfer*,*55*(21-22), pp. 5696-5708. 191

3

3

Gu, YuanTong, Zhan, Haifei, & Xu, Xu (2012) Numerical investigation of mechanical properties of nanowires : a review.

*Interaction and Multiscale Mechanics*,*5*(2), pp. 115-129.Zhan, Haifei & Gu, YuanTong (2012) A fundamental numerical and theoretical study for the vibrational properties of nanowires.

*Journal of Applied Physics*,*111*(12), p. 124303. 61

11

5

Malekani, Javad, Schmutz, Beat, Gu, YuanTong, Schuetz, Michael, & Yarlagadda, Prasad K. (2012) Orthopedic bone plates : evolution in structure implementation technique and biomaterial.

*GSTF Journal of Engineering Technology (JET)*,*1*(1), pp. 135-140.Shirmohammadi, Maryam, Yarlagadda, Prasad K., Kosse, Vladis, & Gu, YuanTong (2012) Study of mechanical deformations on tough skinned vegetables during mechanical peeling process.

*GSTF Journal of Engineering Technology (JET)*,*1*(1), pp. 31-37. 174

Xu, Xu, Liu, Gui-Rong, & Gu, YuanTong (2012) A novel quadratic Edge-based Smoothed Conforming Point Interpolation Method (ES-CPIM) for elasticity problems.

*International Journal of Computational Methods*,*9*(2). 2

1

Saha, Suvash C. & Gu, YuanTong (2012) Free convection in a triangular enclosure with fluid-saturated porous medium and internal heat generation.

*The ANZIAM Journal*,*53*, C127-C141. 116

1

Gu, YuanTong & Zhan, Haifei (2012) MD investigations for mechanical properties of copper nanowires with and without surface defects.

*International Journal of Computational Methods*,*9*(1), pp. 1-8. 220

2

1

Tu, W., Gu, Y.T., & Wen, P. (2012) Effective shear modulus approach for two dimensional solids and plate bending problems by meshless point collocation method.

*Engineering Analysis with Boundary Elements*,*36*(5), pp. 675-684. 81

1

1

Saha, Suvash C. & Gu, YuanTong (2012) Natural convection in a triangular enclosure due to non-uniform cooling on top.

*The ANZIAM Journal*,*53*, C53-C68. 64

Zhan, Haifei & Gu, YuanTong (2012) Modified beam theories for bending properties of nanowires considering surface/intrinsic effects and axial extension effect.

*Journal of Applied Physics*,*111*(8). 106

6

4

Saha, Suvash C., Brown, Richard J., & Gu, YuanTong (2012) Scaling for the Prandtl number of the natural convection boundary layer of an inclined flat plate under uniform surface heat flux.

*International Journal of Heat and Mass Transfer*,*55*(9-10), pp. 2394-2401. 88

3

3

Zhan, Haifei & Gu, YuanTong (2012) Theoretical and numerical investigation of bending properties of Cu nanowires.

*Computational Materials Science*,*55*, pp. 73-80. 134

13

7

Gu, YuanTong & Zhuang, Pinghui (2012) Anomalous subdiffusion equations by the meshless collocation method.

*Australian Journal of Mechanical Engineering*,*10*(1), pp. 1-8. 2

Liu, Sheng, Huang, Han, & Gu, YuanTong (2012) Deconvolution of mechanical properties of thin films from nanoindentation measurement via finite element optimization.

*Thin Solid Films*, pp. 183-190. 2

1

Liu, Sheng, Huang, Han, & Gu, YuanTong (2012) Hardness of silicon nitride thin films characterised by nanoindentation and nanoscratch deconvolution methods.

*Materials Science and Technology*,*28*(9-10), pp. 1172-1176. 2

2

Saha, Suvash C., Gu, YuanTong, Molla, Md. Mamun, Siddiqa, Sadia, & Hossain, Md. Anwar (2012) Natural convection from a vertical plate embedded in a stratified medium with uniform heat source.

*Desalination and Water Treatment : Science and Engineering*,*44*(1-3), pp. 7-14. 122

1

Saha, Suvash C., Brown, Richard J., & Gu, YuanTong (2012) Prandtl number scaling of the unsteady natural convection boundary layer adjacent to a vertical flat plate for Pr > 1 subject to ramp surface heat flux.

*International Journal of Heat and Mass Transfer*,*55*(23-24), pp. 7046-7055. 56

1

1

Zhan, Haifei, Gu, YuanTong, Feng, XiQiao, & Yarlagadda, Prasad K. (2011) Numerical exploration of plastic deformation mechanisms of copper nanowires with surface defects.

*Computational Materials Science*,*50*(12), pp. 3425-3430. 165

12

7

Zheng Ping, Wu & Gu, YuanTong (2011) Prediction of structural integrity, robustness and service life using advanced finite element methods.

*International Journal of Computational Methods*,*8*(4), pp. 787-800. 2

1

Gu, YuanTong, Zhuang, Pinghui, & Liu, QingXia (2011) An advanced meshless method for time fractional diffusion equation.

*International Journal of Computational Methods*,*8*(4), pp. 653-665. 230

7

6

Xu, X., Gu, Y.T., & Yang, X. (2011) A node-based smoothed conforming point interpolation method (NS-CPIM) for elasticity problems.

*International Journal of Computational Methods*,*8*(4), pp. 801-812. 69

1

Gu, YuanTong (2011) An enriched radial point interpolation method based on weak-form and strong-form.

*Mechanics of Advanced Materials and Structures*,*18*(8), pp. 578-584. 2

2

Zhan, Haifei & Gu, YuanTong (2011) Exploration of the defect’s effect on the mechanical properties of different orientated nanowires.

*Advanced Materials Research*,*328-30*, pp. 1239-1244. 79

1

Zhan, Haifei, Gu, YuanTong, Yan, Cheng, & Yarlagadda, Prasad K.D.V. (2011) Numerical exploration of the defect’s effect on mechanical properties of nanowires under torsion.

*Advanced Materials Research*,*335*, pp. 498-501. 120

5

5

Harith, Hazreen, Schmutz, Beat, Schuetz, Michael, Gu, YuanTong, & Yarlagadda, Prasad K. (2011) Quantitative fit assessment of a precontoured fracture fixation plate : its automation and an investigation on the borderline cases.

*Advanced Materials Research*,*339*(2011), pp. 658-689. 67

2

Zhan, Haifei, Gu, YuanTong, & Yarlagadda, Prasad K. (2011) Advanced numerical characterization of mono-crystalline copper with defects.

*Advanced Science Letters*,*4*(4-5), pp. 1293-1301. 7

5

Zhan, Haifei & Gu, YuanTong (2011) Atomistic exploration of deformation properties of copper nanowires with pre-existing defects.

*Computer Modeling in Engineering & Sciences*,*80*(1), pp. 23-56. 5

3

Jiang, Wu-Gui, Li, Gang-Long, & Gu, YuanTong (2011) Effect of micro scale on prediction of thermal residual stresses in multilayer ceramic capacitors (MLCCs).

*Advanced Materials Research : Proceedings of the 2011 International Conference on Advanced Engineering Materials and Technology (AEMT 2011)*, pp. 2651-2654.Zhuang, Pinghui, Gu, YuanTong, Liu, Fawang, Turner, Ian, & Yarlagadda, Prasad K. (2011) Time-dependent fractional advection–diffusion equations by an implicit MLS meshless method.

*International Journal for Numerical Methods in Engineering*. 191

12

9

Liu, QingXia, Gu, YuanTong, Zhuang, Pinghui, Liu, Fawang, & Nie, Yufeng (2011) An implicit RBF meshless approach for time fractional diffusion equations.

*Computational Mechanics*,*48*(1), pp. 1-12. 161

28

26

Liu, Sheng, Huang, Han, & Gu, YuanTong (2011) A nanoscratch method for measuring hardness of thin films.

*International Journal of Nanomanufacturing*,*7*(5/6), pp. 427-435. 102

Liu, S., Gu, Y.T., & Huang, H. (2011) A new tip area function for instrumented nanoindentation at extremely small contact depths.

*Materials Science and Engineering A*,*528*(27), pp. 7948-7951. 8

6

Gu, Y.T., Wang, W., Zhang, L.C., & Feng, X.Q. (2010) An enriched radial point interpolation method (e-RPIM) for analysis of crack tip fields.

*Engineering Fracture Mechanics*,*78*(2011), pp. 175-190. 7

7

Gao, Chongyang, Fang, Bin, & Gu, YuanTong (2010) Theoretical analysis of serrated chip formation based on ideal models in high speed cutting.

*Advanced Materials Research*,*154-*(155), pp. 239-245.Gu, YuanTong (2010) Meshless TL and UL approaches for large deformation analysis.

*Advanced Materials Research*,*139 -*(141), pp. 893-896.Xu, Xu, Liu, Gui-Rong, Gu, YuanTong, Zhang, GuiYong, Luo, J .W., & Peng, J. X. (2010) A point interpolation method with locally smoothed strain field (PIM-LS2) for mechanics problems using triangular mesh.

*Finite Elements in Analysis and Design*,*46*(10), pp. 862-874.Feng, XiQiao, Li, Yue, Cao, Yan-Ping, Yu, Shou-Wen, & Gu, YuanTong (2010) Design methods of rhombic tensegrity structures.

*Acta Mechanica Sinica*,*26*(4), pp. 559-565. 5

5

Gu, YuanTong (2010) An adaptive local meshfree updated Lagrangian approach for large deformation analysis of metal forming.

*Advanced Materials Research*,*97-101*, pp. 2664-2667. 364

2

2

Gu, YuanTong, Zhuang, Pinghui, & Liu, Fawang (2010) An advanced implicit meshless approach for the non-linear anomalous subdiffusion equation.

*Computer Modeling in Engineering & Sciences*,*56*(3), pp. 303-334. 246

21

18

Xu, Xu, Liu, Gui-Rong, Gu, YuanTong, & Zhang, Guiyong (2010) A conforming point interpolation method (CPIM) by shape function reconstruction for elasticity problems.

*International Journal of Computational Methods*,*7*(3), pp. 369-395. 6

6

Liu, Sheng, Gu, YuanTong, & Huang, Han (2009) Determination of elastic modulus of thin coating materials using nanoindentation and finite element analysis.

*Advanced Materials Research*,*76-78*, pp. 392-397. 3

3

Gu, YuanTong & Yarlagadda, Prasad K. (2009) A bridging transition technique for the combination of meshfree method with finite element method in 2D solids and structures.

*Computational Mechanics*,*44*, pp. 119-131. 190

1

1

Liu, G. R., Xu, x., Zhang, G. Y., & Gu, YuanTong (2009) An extended Galerkin weak form and a point interpolation method with continuous strain field and superconvergence using triangular mesh.

*Computational Mechanics*,*43*(5), pp. 651-673. 11

13

Nie, Yufeng, Liu, Ying, Gu, YuanTong, & Fan, Xiangjuo (2009) Fast searching algorithm for candidate satellite-node set in NLMG.

*CMES-Computer Modeling in Engineering & Sciences*,*45*(1), pp. 31-55. 6

4

Gu, YuanTong, Yan, Cheng, & Yarlagadda, Prasad (2009) An advanced meshless technique for large deformation analysis of metal forming.

*Australian Journal of Mechanical Engineering*,*7*(1), pp. 25-32.Gu, YuanTong (2008) An elasto-plastic analysis of solids by the local meshless method based on MLS.

*International Journal of Modern Physics B*,*22*(31/32), pp. 5780-5786. 278

Yan, Cheng, Bai, Ruixiang, Gu, YuanTong, & Ma, Wenjie (2008) Investigation on mechanical behaviour of AM60 magnesium alloys.

*Journal of Achievements in Materials and Manufacturing Engineering*,*31*(2), pp. 398-401.Gu, YuanTong (2008) The geometrically nonlinear analysis of microswitches using the local meshfree method.

*International Journal of Computational Methods*,*5*(4), pp. 513-532. 206

5

5

Gu, YuanTong & Zhang, L.C. (2008) Coupling of the meshfree and finite element methods for determination of the crack tip fields.

*Engineering Fracture Mechanics*,*75*, pp. 986-1004. 480

26

20

Wang, Wenlong, Gu, YuanTong, & Zhang, L-C. (2008) Crack analysis using an improved meshless technique with irregular nodes.

*Advanced Materials Research*,*32*, pp. 263-266.Gu, Y. T. & Wang, Q. (2008) A coupled numerical approach for nonlinear dynamic fluid-structure interaction analysis of a near-bed submarine pipeline.

*Engineering Computations*,*25*(6), pp. 569-588. 346

Gu, YuanTong & Yarlagadda, Prasad K.D.V. (2008) A multiscale deformation analysis for mono-crystalline copper under dynamic uniaxial tension.

*Advanced Materials Research*,*32*, pp. 241-244. 114

3

1

Gu, YuanTong, Wang, Q. X., Lam, K. Y., & Dai, K. Y. (2007) A pseudo-elastic local meshless method for analysis of material nonlinear problems in solids.

*Engineering Analysis with Boundary Elements*,*31*(9), pp. 771-782. 304

8

8

Gu, YuanTong & Zhang, Liangchi (2007) A New Method for Stress and Deformation Analysis from Nano to Macro Dimensional Scales.

*Key Engineering Materials*,*340-34*, pp. 955-960. 2

2

Gu, YuanTong, Wang, Qingxia, & Lam, K (2007) A meshless local Kriging method for large deformation analyses.

*Computer Methods in Applied Mechanics and Engineering*,*196*(9-12), pp. 1673-1684. 40

33

Gu, YuanTong & Zhang, Liangchi (2006) Deformation characterization of a nanoelectromechanical switch.

*Journal of Physics*,*34*(1), pp. 118-123. 1

1

Gu, YuanTong & Liu, Gui-Rong (2006) Meshless techniques for convection dominated problems.

*Computational Mechanics*,*38*(2), pp. 272-283. 34

27

Gu, YuanTong & Zhang, L.C. (2006) A concurrent multiscale method based on the meshfree method and molecular dynamics analysis.

*Multiscale Modeling & Simulation*,*5*(4), pp. 1128-1155. 414

15

8

Gu, YuanTong & Zhang, Liangchi (2006) A simple method for analysing the deformation of nanoelectromechanical switches based on carbon nanotubes.

*International Journal of Nanomanufacturing*,*1*(2), pp. 210-222.Wu, Y, Lui, G, & Gu, YuanTong (2005) Application of meshless local Petrov-Galerkin (MLPG) approach to simulation of incompressible flow.

*Numerical Heat Transfer Part B: Fundamentals: an international journal of computation and methodology*,*48*(5), pp. 459-475. 33

26

Gu, YuanTong (2005) Meshfree methods and their comparisons.

*International Journal of Computational Methods (IJCM)*,*2*(4), pp. 477-515. 38

Gu, YuanTong & Liu, Gui-Rong (2005) Meshless methods coupled with other numerical methods.

*Tsinghua Science and Technology*,*10*(1), pp. 8-15. 13

Liu, Gui-Rong, Zhang, Guiyong, Gu, YuanTong, & Wang, Y (2005) A meshfree radial point interpolation method (RPIM) for three-dimensional solids.

*Computational Mechanics*,*36*(6), pp. 421-430. 52

45

Gu, YuanTong & Liu, Gui-Rong (2005) A meshfree weak-strong (MWS) form method for time dependant problems.

*Computational Mechanics*,*35*(2), pp. 134-145. 16

16

Gu, YuanTong & Liu, Gui-Rong (2001) A local point interpolation method (LPIM) for static and dynamic analysis of thin beams.

*Computer Methods in Applied Mechanics and Engineering*,*190*(42), pp. 5515-5528. 458

61

Gu, YuanTong & Liu, Gui-Rong (2001) A coupled Element Free Galerkin / Boundary Element method for stress analysis of two-dimensional solids.

*Computer Methods in Applied Mechanics and Engineering*,*190*(34), pp. 4405-4419. 266

46

Gu, YuanTong & Liu, Gui-Rong (2001) A Meshless Local Petrov-Galerkin (MLPG) method for free and forced vibration analyses for solids.

*Computational Mechanics*,*27*(3), pp. 188-198. 652

93

82

Liu, Gui-Rong & Gu, YuanTong (2001) A point interpolation method for two-dimensional solids.

*International Journal for Numerical Methods in Engineering*,*50*(4), pp. 937-951. 1,000

376

329

Liu, Gui-Rong & Gu, YuanTong (2000) Meshless local Petrov–Galerkin (MLPG) method in combination with finite element and boundary element approaches.

*Computational Mechanics*,*26*(6), pp. 536-546. 608

60

50

Liu, Gui-Rong & Gu, YuanTong (2000) Coupling of Element Free Galerkin and Hybrid Boundary Element methods using modified variational formulation.

*Computational Mechanics*,*26*(2), pp. 166-173. 270

59

56

## Conference Paper

Xia, Kang, Zhan, Haifei, Wei, Ye, Sang, Shengbo, & Gu, YuanTong (2014) Engineering the mechanical properties of graphene nanotube hybrid structures through structural modulation. In Liu, Gui-Rong & Guan, Z. W. (Eds.)

*Proceedings of the International Conference on Computational Methods*, Scientech Publisher llc, USA, Cambridge, England, pp. 1-9. 14

Thibbotuwawa, Namal, Li, Tong, & Gu, YuanTong (2014) Porohyperelastic finite element model for the kangaroo humeral head cartilage based on experimental study and the consolidation theory. In Liu, Gui-Rong & Guan, Zhongwei (Eds.)

*Proceedings of the International Conference on Computational Methods*, ScienTech, Cambridge, England. 5

Sauret, Emilie & Gu, YuanTong (2014) 3D CFD simulations of a candidate R143a radial-inflow turbine for geothermal power applications. In

*Proceedings of the ASME 2014 Power Conference*, ASME, Baltimore, Maryland, USA. 106

Helambage, Chaminda Prasad Karunasena, Senadeera, Wijitha, Brown, Richard J., & Gu, YuanTong (2014) A novel approach for numerical simulation of plant tissue shrinkage during drying. In Thilakarathne, B.M.K.S., Rathnayake, H.M.A.P., Champa, W.A.H., & Wasala, W.M.C.B. (Eds.)

*Proceedings of the International Research Symposium on Postharvest Technology*, Research and Development Centre, Institute of Post Harvest Technology, Anuradapura, Sri-Lanka, pp. 130-135. 13

Thibbotuwawa, Namal, Oloyede, Adekunle, Senadeera, Wijitha, & Gu, YuanTong (2014) Hyperelastic constitutive relationship for the strain-rate dependent behavior of shoulder and other joint cartilages. In Goh, James (Ed.)

*IFMBE Proceedings : The 15th International Conference on Biomedical Engineering*, Springer International Publishing, Singapore, pp. 255-258.Thiyahuddin, Mohd I., Thambiratnam, David P., & Gu, YuanTong (2014) Performance of new-generation portable water-filled road safety barriers under vehicular impact. In Haddad, Yehia (Ed.)

*AES-ATEMA’2014 Seventeen International Conference on Advances and Trends in Engineering Materials and their Applications*, 16-20 June 2014, Montreal, Canada. 28

Nguyen, Trung Dung, Oloyede, Adekunle, Singh, Sanjleena, & Gu, YuanTong (2014) Porohyperelastic analysis of single osteocyte using AFM and inverse FEA. In Goh, James (Ed.)

*IFMBE Proceedings : The 15th International Conference on Biomedical Engineering*, Springer International Publishing, Singapore, pp. 56-59.Thiyahuddin, Izzat, Gu, YuanTong, & Thambiratnam, David P. (2013) Experimental and numerical study of water-filled road safety barriers. In

*1st Australasian Conference on Computational Mechanics (ACCM2013)*, 3-4 October 2013, University of Sydney, Sydney, Australia. (In Press)Saha, Suvash C., Sauret, Emilie, & Gu, YuanTong (2013) Magnetic convection heat transfer in an open-ended enclosure filled with paramagnetic fluids. In

*1st Australasian Conference on Computational Mechanics (ACCM2013)*, 3-4 October 2013, University of Sydney, Sydney, Australia. (Unpublished) 28

Thiyahuddin, Izzat, Thambiratnam, David, Gu, YuanTong, & Gover, Rory (2013) Safety enhancement of water-filled road safety barrier using interaction of composite materials. In Suwartha, Nyoman (Ed.)

*QiR Proceedings 2013*, Faculty of Engineering, Universitas Indonesia, Yogjakarta, Indonesia. 120

Zhan, Haifei & Gu, YuanTong (2013) Torsional properties of bamboo-like structured Cu nanowires. In

*13th International Conference on Fracture*, 16-21 June 2013, Beijing, China. 27

Li, Tong, Gu, YuanTong, Yarlagadda, Prasad K.D.V., & Oloyede, Adekunle (2013) Multiscale investigation of microfilament networks disruption in living cells. In Yu, Shouwen (Ed.)

*13th International Conference on Fracture*, 16-21 June 2013, Beijing, China. 36

Polwaththe-Gallage, Hasitha-Nayanajith, Saha, Suvash C., & Gu, YuanTong (2013) Deformation properties of single red blood cell in a stenosed microchannel. In

*5th Asia Pacific Congress on Computational Mechanics & 4th International Symposium on Computational Mechanics*, 11-14 December 2013, Singapore. 66

Sauret, Emilie, Saha, Suvash C., & Gu, YuanTong (2013) Numerical simulations of particle deposition in metal foam heat exchangers. In

*Proceedings of the 5th Asia Pacific Congress on Computational Mechanics (APCOM 2013) and 4th International Symposium on Computational Mechanics (ISCM 2013)*, World Scientific Publishing Co, Singapore.Nguyen, Trung Dung & Gu, YuanTong (2013) Porohyperelastic analysis of single chondrocyte using AFM and inverse FEA. In

*5th Asia Pacific Congress on Computational Mechanics & 4th International Symposium on Computational Mechanics*, 11-14 December 2013, Singapore. 74

Paul, Sreebash C., Saha, Suvash C., & Gu, YuanTong (2012) Analysis of heat transfer and fluid flow in a triangular enclosure in presence of an adiabatic fin. In

*Proceedings of the 5th BSME International Conference on Thermal Engineering*, Bangladesh Society of Mechanical Engineers, Islamic University of Technology, Dhaka. 103

Helambage, Chaminda Prasad Karunasena, Senadeera, Wijitha, Gu, YuanTong, & Brown, Richard J. (2012) A coupled SPH-DEM model for fluid and solid mechanics of apple parenchyma cells during drying. In Brandner, P.A. & Pearce, B.W. (Eds.)

*Proceedings of the Eighteenth Australasian Fluid Mechanics Conference*, Australasian Fluid Mechanics Society, University of Tasmania, Launceston, TAS. 211

Saha, Suvash C. & Gu, YuanTong (2012) Thermo-magnetic convection of paramagnetic fluids with non-instantaneous heating. In Brandner, P.A. & Pearce, B.W. (Eds.)

*Proceedings of the 18th Australasian Fluid Mechanics Conference*, Australasian Fluid Mechanics Society, University of Tasmania, Launceston, TAS. 26

Helambage, Chaminda, Senadeera, Wijitha, Gu, YuanTong, & Brown, Richard J. (2012) A particle-based micromechanics approach to simulate structural changes of plant cells during drying. In Gu, YuanTong & Saha, Suvash C. (Eds.)

*Proceedings of 4th International Conference on Computational Methods (ICCM 2012)*, Crowne Plaza, Gold Coast, Australia. 126

Li, Tong, Gu, YuanTong, Yarlagadda, Prasad K., & Oloyede, Adekunle (2012) Continuum mechanics modelling of microfilament networks with different architectures based on molecular investigation of single F-actin. In Gu, YuanTong & Saha, Suvash C. (Eds.)

*Proceedings of the 4th International Conference on Computational Methods*, Crowne Plaza, Gold Coast, QLD. 58

Zhan, Haifei, Gu, YuanTong, Yan, Cheng, & Yarlagadda, Prasad K. (2012) Influence of grain boundaries on the vibrational properties of silver nanowires. In Gu, YuanTong & Saha, Suvash C. (Eds.)

*4th International Conference on Computational Methods*, Crowne Plaza, Gold Coast, QLD, pp. 1-8. 60

Polwaththe-Gallage, Hasitha-Nayanajith, Gu, YuanTong, Saha, Suvash C., Senadeera, Wijitha, & Oloyede, Adekunle (2012) Numerical simulation of red blood cells' deformation using SPH method. In Gu, YuanTong & Saha, Suvash C. (Eds.)

*4th International Conference on Computational Methods (ICCM 2012)*, 25-28 November 2012, Crowne Plaza, Gold Coast, QLD. 164

Polwaththe-Gallage, Hasitha-Nayanajith, Gu, YuanTong, Saha, Suvash C., Senadeera, Wijitha, & Oloyede, Adekunle (2012) Numerical simulation of red blood cells’ motion : a review. In Gu, YuanTong & Saha, Suvash C. (Eds.)

*4th International Conference on Computational Methods (ICCM 2012)*, 25-28 November 2012, Crowne Plaza, Gold Coast, QLD. 214

Nguyen, Trung Dung, Gu, YuanTong, Oloyede, Adekunle, & Senadeera, Wijitha (2012) Porohyperelastic analysis to explore mechanical properties of chondrocytes using numerical modeling and experiments : a finite element study. In

*4th International Conference on Computational Methods (ICCM 2012)*, 25-28 November 2012, Crowne Plaza, Gold Coast, QLD. 160

Thiyahuddin, Izzat, Gu, YuanTong, & Thambiratnam, David P. (2012) A coupled SPH/FEM analysis of portable water filled barriers. In

*4th International Conference on Computational Methods (ICCM2012)*, 25-28 November 2012, Gold Coast, Qld. 223

Thibbotuwawa, Namal, Gu, YuanTong, Oloyede, Adekunle, Senadeera, Wijitha, & Li, Tong (2012) Finite element shoulder models. In Gu, YuanTong & Saha, Suvash C. (Eds.)

*Proceedings of 4th International Conference on Computational Methods (ICCM 2012)*, Crowne Plaza, Gold Coast. 173

Zhan, Haifei, Gu, YuanTong, Yarlagadda, Prasad K., & Yan, Cheng (2012) Influence of pre-exsiting surface defects on the vibrational properties of Ag nanowires. In

*12th International Conference on Nanotechnology (IEEE NANO 2012)*, 20-23 August 2012, International Convention Centre, Birmingham. 107

Bian, Jian, Murray, Martin H., & Gu, YuanTong (2012) A non-linear dynamic analysis of heavy haul track line sleepers under wheel flat. In

*Conference on Railway Engineering CORE2012*, Brisbane Convention and Exhibition Centre, Brisbane, Australia. 81

Liu, Fawang, Turner, Ian, Anh, Vo, & Gu, YuanTong (2012) An implicit RBF meshless method for a fractal mobile/immobile transport model. In Chen, Wen, Sun, HongGuang, & Baleanu, Dumitru (Eds.)

*The Proceedings of the 5th Symposium on Fractional Differentiation and Its Applications*, Hohai University, Hohai University, Nanjing.Shirmohammadi, Maryam, Yarlagadda, Prasad K., Kosse, Vladis, & Gu, YuanTong (2011) Study of tissue damage during mechanical peeling of tough skinned vegetables. In

*Annual International Conference Proceedings : Materials Science, Metal and Manufacturing (M3 2011)*, Global Science and Technology Forum, Singapore, pp. 41-46. 494

Zhan, Haifei & Gu, YuanTong (2011) Molecular dynamics study of dynamic buckling properties of nanowires with defects. In Kaneko, Shigehiko (Ed.)

*Proceedings of the 14th Asia Pacific Vibration Conference 2011*, The Hong Kong Polytechnic University, The Hong Kong Polytechnic University, HongKong, pp. 1-7. 219

Malekani, Javad, Schmutz, Beat, Gu, YuanTong, Schuetz, Michael, & Yarlagadda, Prasad K. (2011) Biomaterials in orthopedic bone plates : a review. In Yarlagadda, Prasad K. (Ed.)

*Proceedings of the 2nd Annual International Conference on Materials Science, Metal & Manufacturing (M3 2011)*, Global Science and Technology Forum, Bali, Indonesia, pp. 71-77. 897

Hasan, Muhammad Noman, Saha, Suvash C., & Gu, YuanTong (2011) Effect of differentially heating and consequent transient behaviour for natural convection within an enclosure of sinusoidal corrugated side walls. In

*Proceedings of the International Conference on Mechanical Engineering 2011*, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh. 38

Saha, Suvash C., Gu, YuanTong, & Hossain, Md. Anwar (2011) Free convection heat transfer through coupled thermal boundary layers in a partitioned triangular enclosure. In

*Proceedings of the International Conference on Mechanical Engineering 2011*, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh. 78

Bian, Jian, Gu, YuanTong, & Murray, Martin H. (2011) Advanced numerical study of impact forces on railway sleepers under wheel flat. In

*Asia-Pacific Vibration Conference 2011*, 5-8 December 2011, Hong Kong Polytechnic University, Hong Kong. 303

Yu, Yi, Sun, Yong, & Gu, YuanTong (2011) Handling incomplete data in survival analysis with multiple covariates. In

*The 5th World Congress on Engineering Asset Management (WCEAM 2010)*, 25-27 October 2010, Brisbane Convention and Exhibition Centre, Brisbane, Qld.Roy, Aditi, Tan, Andy, Gu, YuanTong, & Kaphle, Manindra R. (2011) Simulation of AE wave propagation in thin plate for source identification. In

*The 5th World Congress on Engineering Asset Management (WCEAM 2010)*, 25-27 October 2010, Brisbane Convention and Exhibition Centre, Brisbane, Qld.Roy, A., Tan, A.C.C., & Gu, Y.T. (2011) Simulation of inplane and out of plane AE source in thin plate. In

*The First International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing*, 27-29 April 2011, Queensland University of Technology, Brisbane, Qld. 222

Chiu, Wei-Fen, Gu, YuanTong, Karim, Azharul, & Ma, Lin (2010) A modified quality control method for manufacturing process in mask industry. In

*2010 International Conference on Manufacturing Engineering and Automation (ICMEA 2010)*, 10-12 December 2010, Guangzhou University, Guangzhou, China. 218

Yu, Yi, Ma, Lin, Sun, Yong, & Gu, YuanTong (2010) Remaining useful life prediction using elliptical basis function network and Markov Chain. In Ardil, Cemal (Ed.)

*World Academy of Science, Engineering and Technology*, Venice, pp. 800-804. 108

1

Zhan, Haifei, Gu, YuanTong, & Yarlagadda, Prasad K. (2010) Atomistic numerical investigation of single-crystal copper nanowire with surface defects. In Howard, Ian, Teh, Kian, & Davies, Ian (Eds.)

*Proceedings of the 6th Australasian Congress on Applied Mechanics : Australian Journal of Mechanical Engineering*, Engineers Australia, Perth Convention Exhibition Centre, Perth, WA, pp. 1-9.Gu, Y.T. & Tan, Andy C.C. (2010) Visualization : A powerful tool for effective teaching of dynamics. In Rutkowski, J (Ed.)

*Proceedings of the 2010 International Conference on Engineering Education*, iNEER - International Network for Engineering Education, Gliwice, Poland, pp. 1-5.Gu, YuanTong (2010) An advanced implicit meshless approach for fractional partial differential equation in computational mechanics. In Howard, Ian, Teh, Kian, & Davies, Ian (Eds.)

*Proceedings from the 6th Australasian Congress on Applied Mechanics*, Engineers Australia, Perth Convention Exhibition Centre, Perth, WA, pp. 1-8.Gu, YuanTong & Yarlagadda, Prasad K. (2010) A coupled meshless technique/molecular dynamics approach for deformation characterization of monocrystalline metal. In Lu, Jane Wei-Zhen, Leung, Andrew Yee Tak, Lu, Vai Pan, & Mok, Kai Meng (Eds.)

*Proceedings of the 2nd International Symposium on Computational Mechanics and the 12th International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science*, American Institute of Physics, Hong Kong and Macau, China, pp. 354-359.Gu, YuanTong, Wang, Wenlong, Zhang, L.C., & Feng, X.Q. (2010) An enriched radial point interpolation method (e-RPIM) for analysis of crack tip fields. In Lu, Jane Wei-Zhen, Leung, Andrew Yee Tak, Lu, Vai Pan, & Mok, Kai Meng (Eds.)

*Proceedings of the 2nd International Symposium on Computational Mechanics and the 12th International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science*, AIP - American Institute of Physics , Hong Kong, Macau, China , pp. 348-353.Gu, YuanTong & Tan, Andy (2009) Dynamics deflection analysis of nanoelectromechanical switches based on carbon nanotubes. In

*Proceedings of the 13th Asia-Pacific Vibration Conference*, University of Canterbury, University of Canterbury, Christchurch, New Zealand, pp. 1-7.Gu, Y.T. & Tan, Andy (2009) Using visualization tool to help engineering students learning dynamics. In Kestell, C, Grainger, S, & Cheung, J (Eds.)

*Proceedings of the 20th Annual Conference for the Australasian Association for Engineering Education*, The School of Mechanical Engineering, The University of Adelaide, Adelaide, Australia, pp. 237-242.Gu, YuanTong, Tan, Andy C. C., & Yarlagadda, Prasad K. (2008) An effective multiscale approach for deformation analyses of carbon nanotube-based nanoswitches. In Chiao, Jung-Chih & Hariz, Alex J. (Eds.)

*SPIE-Micro- and Nanotechnology: Materials, Processes, Packaging, and Systems IV*, 10 December 2008, Melbourne, Australia. 148

Gu, YuanTong, Yan, Cheng, & Yarlagadda, Prasad K. (2008) An advanced meshless technique for large deformation analysis of metal forming. In Yarlagadda, Prasad K. & Gudimetla, Prasad V. (Eds.)

*9th Global Congress on Manufacturing and Management*, 12-14th November, 2008, Gold Coast, Australia. 240

Yu, Yi, Ma, Lin, Gu, YuanTong, & Zhou, Yifan (2008) Confidence interval of lifetime distribution using bootstrap method. In

*The Third World Congress on Engineering Asset Management and Intelligent Maintenance Systems Conference*, 27-30 October 2008, Beijing, China. 760

Gover, Rory, Gu, YuanTong, Gudimetla, Prasad, & Thambiratnam, David (2008) Impact characteristics of a flexible road barrier and vehicle crash response. In Aravinthan, T, Karunasena, W, & Wang, H (Eds.)

*Futures in Mechanics of Structures and Materials: Proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20)*, 2 - 5 December 2008, Australia, Queensland, Toowoomba.Bai, R, Gu, YuanTong, Ma, Wenjie, & Yan, Cheng (2008) Investigation on mechanical behaviour of AM60 magnesium alloys. In Yarlagadda, P & Gudimetla, P (Eds.)

*Proceedings of the 9th Global Congress on Manufacturing and Management (GCMM2008)*, 12 - 14 November 2008, Australia, Queensland, Gold Coast.Gu, YuanTong (2007) A coupled meshfree technique/molecular dynamics method for multiscale stress and deformation analysis in computational mechanics. In Albermani, Faris (Ed.)

*5th Australasian Congress on Applied Mechanics*, Dec. 1-12, 2007, Brisbane, Australia.Gu, YuanTong & Hargreaves, Douglas J. (2007) A new transition technique for the combination of meshfree methods with other numerical methods from macro- to nanoscales. In

*3rd Asian-Pacific Congress on Computational Mechanics*, 3 - 6 December 2007, Kyoto, Japan. 328

## Conference Item

Helambage, Chaminda Prasad Karunasena, Senadeera, Wijitha, Gu, YuanTong, & Brown, Richard J. (2012) A meshfree particle based model for microscale shrinkage mechanisms of food materials in drying conditions. In Goscinski, Wojtek James (Ed.)

*Doctoral Showcase - Early Research Showcase workshop at The International Conference for Higher Performance Computing, Networking, Storage and Analysis (SC12)*, 10-16 November 2012, Salt Palace Convention Center, Salt Lake City, Utah, USA. (Unpublished) 3

Saha, Suvash C. & Gu, YuanTong (2011) Free convection in a triangular enclosure with fluid-saturated porous medium and internal heat generation. In

*10th Engineering Mathematics and Applications Conference*, 4th - 7th December 2011, University of Technology Sydney,Sydney. (Unpublished) 1

Saha, Suvash C. & Gu, YuanTong (2011) Natural convection in a triangular enclosure due to non-uniform cooling on top. In

*10th Engineering Mathematics and Applications Conference*, 4th - 7th December 2011, University of Technology, Sydney, Sydney, N.S.W.. (Unpublished)Saha, Suvash C. & Gu, YuanTong (2011) Prandtl number scaling of natural convection of an inclined flat plate due to uniform surface heat flux. In

*10th Engineering Mathematics and Applications Conference (EMAC 2011)*, 4th - 7th December 2011, University of Technology Sydney, Sydney, NSW. (Unpublished)