Browse By Person: Wang, Jun
 | Up a level |
Group by: Item Type | Date
Number of items: 56.
Book
Wang, Jun (2003) Abrasive Waterjet Machining of Engineering Materials. Trans Tech Publications Ltd, Zurich, Switzerland.
Book Chapter
Wang, Jun (2003) Economic Optimization of Machining Operations in Computer Aided Manufacturing Systems. In Leondes, C (Ed.) Computer Aided and Integrated Manufacturing Systems - Volume 5: Manufacturing Processes. World Scientific Publishing Co. Pty Ltd, River Edge, NJ, USA, pp. 131-160.
Journal Article
Wang, Jun & Feng, Yanming (2013) Orthogonality defect and reduced search-space size for solving integer least-squares problems. GPS Solutions, 17(2), pp. 261-274.
Wang, Jun & Feng, Yanming (2012) Reliability of partial ambiguity fixing with multiple GNSS constellations. Journal of Geodesy, 87(1), pp. 1-14.
Feng, Yanming & Wang, Jun (2011) Computed success rates of various carrier phase integer estimation solutions and their comparison with statistical success rates. Journal of Geodesy, 85(2), pp. 93-103.
5 
4
5 4Wang, Jun & Xu, Shunli (2006) A Study of Abrasive Waterjet Cutting of Alumina Ceramics with Controlled Nozzle Oscillation. The International Journal of Advanced Manufacturing Technology, 27(7-8), pp. 693-702.
17 18
17 18Wang, Jun & Xu, Shunli (2005) Enhancing the AWJ Cutting Performance by Multipass Machining with Controlled Nozzle Oscillation. Key Engineering Materials: Advances in Abrasive Technology VIII, 291-292, pp. 453-458.
6 4
6 4Liu, H., Wang, J., Kelson, N., & Brown, R.J. (2004) A study of abrasive water jet characteristics by CFD simulation. Journal of Material Processing Technology, 153-154, pp. 488-493.
278 47 29
278 47 29Huang, Chuanzhen, Liu, H, Sun, Jing, & Wang, Jun (2004) Microstructure and Mechanical Properties of Two Kinds of AI203/SiC Nanocomposites. Materials Science Forum, 471-472, pp. 243-247.
Huang, Chuanzhen, Liu, Hua, & Wang, Jun (2004) Modelling the Depth of Jet Penetration in Abrasive Waterjet Contouring of Alumina Ceramics. Materials Science Forum, 471-472(2004), pp. 462-468.
Christodoulou, Perkilis, Hermanto, H, Wang, Jun, & Wei, Xiaopeng (2004) Rapid Tooling for Zinc Spin Casting using Arc Metal Spray Technology. Journal of Materials Processing Technology, 146, pp. 283-288.
7 4
7 4Ai, Xing, Huang, Chuanzhen, Liu, Hanlian, Sun, Jing, & Wang, Jun (2004) Simulation Design for the Composition of Zirconia Composite Ceramic Tool. Journal of Materials Engineering and Performance, 13(2), pp. 167-171.
He, Lin, Huang, Chuanzhen, Liu, H, & Wang, Jun (2004) A Study on the Microstructure of Ti(C,N) Matrix Cermet tool Material. Materials Science Forum, 471-472, pp. 67-71.
Wang, Jun (2004) Techniques for Enhancing the Cutting Performance of Abrasive Waterjets. Key Engineering Materials, 257-258(2004), pp. 521-526.
3 2
3 2Liu, Hua, Wang, Jun, Brown, Richard J., & Kelson, Neil A. (2003) Computational Fluid Dynamics (CFD) Simulation of Ultrahigh Velocity Abrasive Waterjet. Key Engineering Materials, 233-236, pp. 477-482.
4
4Guo, Dongming & Wang, Jun (2003) The Cutting Performance in Multipass Abrasive Waterjet Machining of Industrial Ceramics. Journal of Materials Processing technology, 133, pp. 371-377.
17 13
17 13Wang, Jun, Wei, Xiaopeng, & Zhang, Jianming (2003) Development of Optimization Strategies and CAM Software for Single Pass End-Milling Operations. Chinese Journal of Mechanical Engineering, 39(10), pp. 141-146.
1
1Huang, Chuanzhen, Song, Wenge, & Wang, Jun (2003) The Effect of Tool Flank Wear on the Orthogonal Cutting Process and its Practical Implications. Journal of Materials Processing Technology, 142, pp. 338-346.
16 14
16 14Wang, Jun (2003) The Effects of the Jet Impact Angle on the Cutting Performance in AWJ Machining of Alumina Ceramics. Key Engineering Materials, Advances in Abrasive Technology V, 238-239, pp. 117-122.
11
11Huang, Chuanzhen, Kuriyagawa, Tsunemoto, & Wang, Jun (2003) An Experimental Study to Enhance the Cutting Performance in Abrasive Waterjet Machining. Machining Science and Technology, 7(2), pp. 191-207.
23 19
23 19Wang, Jun, Wei, Xiaopeng, & Zhang, Jianming (2003) A Hybrid Programming System for NC Turning Operation Based on Care-Based Reasoning. Mechanical Science and Technology, 22(3), pp. 369-371.
Fan, Yufeng, Kato, Massana, Kuriyagawa, Tsunemoto, SYOJI, Katsuo, Wang, Jun, & Wu, Yongbo (2003) A New Grinding Technique without Employing a Regulating Wheel. Key Engineering Materials, 238-239, pp. 355-360.
14
14Wang, Jun, Wei, Xiaopeng, & Zhang, Jianming (2003) An Optimization Strategy for Drilling Operations. China Mechanical Engineering, 14(18), pp. 1596-1600.
Wang, Jun, Wei, Xiaopeng, & Zhang, Jianming (2003) An Optimization Strategy for Multipass Rough Face Milling Operations. China Mechanical Engineering, 14(10), pp. 854-857.
Wang, Jun, Wei, Xiaopeng, Zhang, Jianming, & Zhou, Yunhong (2003) Research on IFS Modeling Methods of Natural Scenery. Journal of Engineering Graphics, 24(4), pp. 103-109.
Chen, Frank Lin, Lemma, Engida, Siores, Elias, & Wang, Jun (2003) Striation Formation Mechanisms on the Jet Cutting Surface. Journal of Materials Processing Technology, 141, pp. 213-218.
23 21
23 21Liu, Hua & Wang, Jun (2002) Analysis of the Cutting Performance in Contouring using an Abrasive Waterjet. Chinese Journal of Mechanical Engineering, 15, pp. 73-78.
1
1Wang, Jun, Wei, Xiaopeng, Zhang, Jianming, & Zhou, Yunhong (2002) IFS Line Scan Partitioning Compression Coding. Journal of Engineering Graphics, 23(3), pp. 154-164.
Gudimetla, Prasad, Wang, Jun, & Wong, Walter (2002) Kerf Formation Analysis in the Abrasive Waterjet Cutting of Industrial Ceramics. Journal of Materials Processing Technology, 128, pp. 123-129.
24 14
24 14Chen, L, Lemma, E, Siores, Elias, & Wang, Jun (2002) Optimising the AWJ Cutting Process of Ductile Materials using Nozzle Oscillation Technique. International Journal of Machine Tools & Manufacture, 42, pp. 781-789.
45 33
45 33Guo, Dongming, Kuriyagawa, T, Wang, Jun, & Wei, Xiaopeng (2002) Optimization of Cutting Conditions for Single Pass Turning Operations Using a Deterministic Approach. International Journal of Machine Tools & Manufacture, 42, pp. 1023-1033.
35 26
35 26Guo, Dongming & Wang, Jun (2002) A Predictive Depth of Penetration Model for Abrasive Waterjet Cutting of Polymer Matrix Composites. Journal of Materials Processing Technology, 121, pp. 390-394.
47 33
47 33Chen, L, Lemma, E, Siores, Elias, & Wang, Jun (2002) Study of Cutting Fiber-reinforced Composites by using Abrasive Water-jet with Cutting Head Oscillation. Composite Structures, 57, pp. 297-303.
12 6
12 6Ai, Xing, He, Lin, Huang, Chuanzhen, Sun, Jing, & Wang, Jun (2002) Study on the Wear Resistance Ability of ZrO2/Al2O3 Ceramic Scissors for Spinning and Weaving. Chinese Journal of Mechanical Engineering, 15, pp. 183-186.
Armarego, E.J.A. & Wang, Jun (2001) Computer-Aided Optimization of Multiple Constraint Single Pass Face Milling Operations. Machining Science and Technology, pp. 77-100.
16 12
16 12Wang, Jun (2001) Development of a Chip Flow Model for Turning Operations. International Journal of Machine Tools & Manufacture, pp. 1265-1274.
15 11
15 11Ai, Xing, Huang, Chuanzhen, Li, Z, Wang, B, & Wang, Jun (2001) The Preparation of Super-Fine Alumina Powders with Sol-Gel Technology. Key Engineering Materials, pp. 127-132.
Conference Paper
Wang, Jun, Feng, Yanming, & Wang, Charles (2010) A Modified inverse integer Cholesky decorrelation method and the performance on ambiguity resolution. In Wang, Jun (Ed.) Proceedings of CPGPS 2010 Navigation and Location Services: Emerging Industry and International Exchanges, August, 2010, Shanghai, China.
189
189Wang, Liang & Chan, Tommy H.T. (2009) Review of vibration-based damage detection and condition assessment of bridge structures using structural health monitoring. In The Second Infrastructure Theme Postgraduate Conference : Rethinking Sustainable Development: Planning, Engineering, Design and Managing Urban Infrastructure, 26 March 2009, Queensland University of Technology, Brisbane.
1,332
1,332Wang, Jun & Feng, Yanming (2009) Integrity determination of RTK solutions in precision farming applications. In Ostendorf, B., Baldock, P., Bruce, D., Burdett, M., & Corcoran, P. (Eds.) Proceedings of the Surveying and Spatial Sciences Institute Biennial International Conference 2009, Surveying and Spatial Sciences Institute, Adelaide Convention Centre, Adelaide, South Australia, pp. 1277-1291.
243
243Wang, Jun, Feng, Yanming, & Wang, Charles (2009) Rover autonomous integrity monitoring of GNSS RTK positioning solutions with multi-constellations. In Proceedings of the 22nd International Technical Meeting of the Satellite Division of the Institute of Navigation, Institute of Navigation, Savannah International Convention Center, Savannah, Georgia, pp. 1361-1370.
232
232Wang, Jian-wei, Wang, Jun, Wei, Xiao-peng, & Zhang, Jian-ming (2004) Collaborative evaluation of engineering design concepts on the Web. In Shen,, Li,, Liu,, Bartlies,, Zeng,, Li,, et al. (Eds.) Proceedings of the 8th International Confernce on Computer Supported Cooperative Work in Design, 26-28 May 2004, Xiamen, China.
2
2Chattopadhyay, Gopi, Hargreaves, Douglas, & Wang, Jun (2004) Development of a Postgraduate Engineering Management Program for the Asia-Pacific Region. In Proceedings 2004 IEEE International Engineering Management Conference. Innovation and Entrepreneurship for Sustainable Development, 18-21 October 2004, Singapore.
Wang, Jun, Wang, Xuyue, & Wu, Y (2004) Effect of Incident Angle and Critical Angle on Laser Processing of a Small Vitrified CBN Grinding Wheel. In Akkok, Metin, Kaftanoglu, Bilgin, Tamaki, Junichi, Kuriyagawa, Tsunemoto, Arikan, MASahir, & Balkan, Tuna (Eds.) Advances in Abrasive Technology 7, 17-19 June 2004, Bursa, Turkey.
Wang, Jun & Xu, Shunli (2004) Modelling the Cutting Performance of AWJ Machining with Nozzle Oscillation. In Akkok, Metin, Kaftanoglu, Bilgin, Tamaki, Junichi, Kuriyagawa, Tsunemoto, Arikan, MASahir, & Balkan, Tuna (Eds.) Design and Production of Dies and Molds - Advances in Abrasive Technology 7, 17-19 June 2004, Bursa, Turkey.
Liu, Hua, Wang, Jun, Kelson, Neil, & Brown, Richard (2003) CFD simulation and mathematical models of the abrasive waterjet characteristics. In Olabi, & Hashmi, (Eds.) Proceedings of the International Conference on Advances Materials and Processing Technologies, 8-11 July 2003, Dublin, Ireland.
Wang, Jun, Wei, Xiaopeng, & Zhang, Jianming (2003) An Approach to Conceptual Design for Dynamic Design Specifications. In Wu, Enhua, Sun, Hanqiu, & Qi, Dongxu (Eds.) CAD/Graphics technology and Its applications - Proceedings of the 8th International Conference on CAD/Graphics, 29-31 October 2003, Macao, China.
Wang, Jun, Wei, Xiaopeng, & Zhang, Jianming (2003) Evaluating Design Concepts by Ranking Fuzzy Numbers. In Proceedings of 2003 International conference on machine learning and cybernetics; Volume 4 of 5, 2-5 November 2003, Xi'an, China.
1
1Wang, Jun & WANG, Xuyue (2003) An Experimental Study of Laser 3D Machining with Variable Process Parameters. In Yuji Furukawa, Prof (Ed.) Proceedings of the international conference on leading edge manufacturing in the 21st century, 3-6 November 2003, Niigata, Japan.
Wang, Jianwei, Wang, Jun, Wei, Xiaopeng, & Zhang, Jianming (2003) An Intelligent Human-Computer Cooperative Model for Creative Design. In Pan, Yunhe, Lin, Zongkai, Sun, Shouqian, Zhu, Guohai, He, Xihua, & Zhou, Ligang (Eds.) Proceedings of 5th International conference on computer-aided industrial design and conceptual design, 18-20 October 2003, Hangzhou, P.R. China.
Wang, Jun (2002) Enhancing the Capability and Performance of Abrasive Waterjet Cutting Technology by Multipass Operations. In Wang, D, Jia, Z, & Wang, J (Eds.) Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing, 10 - 12 July 2002, Dalian, China.
Wang, Jun (2002) Rapid Development of Spin Cast Zinc Parts using Rapid Tooling Technologies. In Wang, D, Jua, Z, & Wang, J (Eds.) Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing, 10 - 12 July 2002, Dalian, China.
Song, Wenge & Wang, Jun (2001) Allowing for Tool Flank Wear in Predicting the Cutting Forces for Oblique Machining. In Proceedings of the International Symposium of Advanced Manufacturing Technology, 27-29 October 2001.
Liu, Hua & Wang, Jun (2001) An Analysis of the Cutting Performance in Contouring Using an Abrasive Waterjet. In Proceedings of the International Symposium of Advanced Manufacturing Technology, 27-29 October 2001.
Li, Fuyuan, Song, Wenge, & Wang, Jun (2001) Approach of Mathematical Solution of Optimization for Single Pass Turning. In Proceedings of the International Symposium of Advanced Manufacturing Technology, 27-29 October 2001.
Ai, Xing, He, Lin, Huang, Chuanzhen, Li, Zhaoqian, Sun, Jing, Wang, Jun, et al. (2001) A Study on the Wear Resistance Ability of Zro2/Al2O3 Ceramic Scissors for Spinning and Weaving. In Proceedings of the International Symposium of Advanced Manufacturing Technology, 27-29 October 2001.