Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > AUTOMOTIVE ENGINEERING (090200)"
|Up a level|
- Subjects classification (48321)
- Australian and New Zealand Standard Research Classification (48321)
- ENGINEERING (090000) (6688)
- AUTOMOTIVE ENGINEERING (090200) (161)
- ENGINEERING (090000) (6688)
- Australian and New Zealand Standard Research Classification (48321)
Group by: Authors/Creators | Item Type
Number of items at this level: 45.
Ahmed, S., Rasul, M.G., Martens, W., & Brown, R.J. (2009) Sustainable reuse of storm/waste-water resources : a review on solar photocatalytic purification processes. In The Central Region Engineering Conference (CREC 2009), 14-15 August 2009, Central Queensland Univeristy, Rockhampton, QLD.
Bodisco, Timothy A. & Brown, Richard J. (2011) Ignition delay in an ethanol fumigated common rail diesel engine. In Proceedings of the Australian Combustion Symposium, The University of Newcastle, NSW.
Bodisco, Timothy A., Low Choy, Samantha, & Brown, Richard J. (2013) A Bayesian approach to the determination of ignition delay. Applied Thermal Engineering, 60(1-2), pp. 79-87.
Bodisco, Timothy A., Low Choy, Samantha, Masri, Assaad R., & Brown, Richard J. (2015) A statistical model for combustion resonance from a DI diesel engine with applications. Mechanical Systems and Signal Processing, 60-61, pp. 406-419.
Bodisco, Timothy A., Pham, Phuong X., Islam, Aminul, Brown, Richard J., Masri, Assaad R., & Bockhorn, Henning (2013) Ignition delay of bio-fuels in a common-rail compression ignition engine. In Proceedings of the Australian Combustion Symposium, Perth, Western Australia.
Chen, Yikai, He, Jie, King, Mark J., Chen, Wu-wei, & Zhang, Wei-hua (2014) Stiffness-damping matching method of an ECAS system based on LQG control. Journal of Central South University, 21(1), pp. 439-446.
Chi, Seokho & Caldas, Carlos H. (2012) Design of a preliminary error impact analysis model for spatial safety assessment of earthmoving operations. Automation in Construction, 22, pp. 212-222.
Cox, Francis, Bodisco, Timothy A., & Peeler, David (2014) Continuous remote emissions monitoring – the lynchpin for air quality management. In Proceedings of the 12th AusIMM Underground Operators' Conference, The Australasian Institute of Mining and Metallurgy, AusIMM, Adelaide, South Australia, pp. 137-142.
Davis, Lloyd E. & Bunker, Jonathan M. (2008) Suspension testing of 3 heavy vehicles – methodology and preliminary frequency analysis. Report. State of Queensland (Department of Main Roads) & Queensland University of Technology, Brisbane, Queensland.
Dhanasekar, Manicka, Cole, Colin, & Handoko, Yunendar (2007) Experimental evaluation of the effect of braking torque on bogie dynamics. International Journal of Heavy Vehicle Systems, 14(3), pp. 308-330.
Foo, Ernest, Djamaludin, Christopher, & Rakotonirainy, Andry (2015) Security issues for future intelligent transport systems. In Proceedings of the 2015 Australasian Road Safety Conference, Gold Coast, Qld.
Gruyer, Dominique, Rakotonirainy, Andry, & Vrignon, Jeremy (2005) Advancement in Advanced Driving Assistance Systems tools: Integrating vehicle dynamics, environmental perception and drivers' behaviours to assess vigilance. In Intelligent Vehicles and Road Infrastructure Conference, 16-17 February 2005, Melbourne, Victoria.
Henderson, Michael S. & Goldberg, Fred (1999) A systematic approach to the control of persistent and recidivist drinking drivers. In McClure, Roderick (Ed.) Third National Conference on Injury Prevention and Control, 9-12 May 1999, Brisbane, Queensland.
Hu, Y.Q., Yan, Cheng, Zhang, H.F., Ye, Lin, & Hu, Z.Q. (2004) Preparation and hydrogenation characteristics of Mg–30 wt.% Ti37.5V25Cr37.5 composite. Journal of Alloys and Compounds, 375(1-2), pp. 265-269.
Jahirul, Mohammed I., Brown, Richard J., Senadeera, Wijitha, O'Hara, Ian M., & Ristovski, Zoran (2013) The use of artificial neural networks for identifying sustainable biodiesel feedstocks. Energies, 6(8), pp. 3764-3806.
Jahirul, Mohammed I., Senadeera, Wijitha, Brooks, Peter, Brown, Richard J., Situ, Rong, Pham, Phuong X., et al. (2013) An Artificial Neutral Network (ANN) model for predicting biodiesel kinetic viscosity as a function of temperature and chemical compositions. In Piantadosi, J., Anderssen, R.S., & Boland, J. (Eds.) MODSIM2013, 20th International Congress on Modelling and Simulation, Modelling and Simulation Society of Australia and New Zealand, Adelaide Convention Centre, SA, Australia, pp. 1561-1567.
Kim, Inhi, Larue, Gregoire S., Ferreira, Luis, Rakotonirainy, Andry, & Shaaban, Khaled (2015) Traffic safety at road–rail level crossings using a driving simulator and traffic simulation. Transportation Research Record, 2476, pp. 109-118.
Kulkarni, Ambarish, Kosse, Vladis, Kapoor, Ajay, & Iyer, Mahalinga (2009) Virtual design process : design validation tool schematic approach in car carrier. In Conference Proceedings IAEng Journal, International Association of Engineers , San Fransisco.
Larue, Gregoire S., Rakotonirainy, Andry, & Haworth, Narelle L. (2016) A simulator evaluation of effects of assistive technologies on driver cognitive load at railway level crossings. Journal of Transportation Safety & Security, 8(Supplement 1), pp. 56-69.
Larue, Gregoire S., Rakotonirainy, Andry, & Pettitt, Anthony N. (2011) Driving performance impairments due to hypovigilance on monotonous roads. Accident Analysis and Prevention, 43(6), pp. 2037-2046.
Larue, Gregoire S., Rakotonirainy, Andry, & Pettitt, Anthony N. (2015) Predicting reduced driver alertness on monotonous highways : a driving simulator study. IEEE Pervasive Computing, 14(2), pp. 78-85.
Larue, Gregoire S. & Wullems, Christian (2017) Application of pneumatic tubes to evaluate driver behavior and interventions at low traffic railway level crossings. In Transportation Research Board (TRB) 96th Annual Meeting, 7-12 January 2017, Washington, D.C. (Unpublished)
Larue, Gregoire S., Wullems, Christian, & Naweed, Anjum (2016) Evaluation of a new level crossing warning concept to improve safety of level crossings in remote locations. In 11th World Congress on Railway Research, 29 May - 2 June 2016, Milan, Italy.
Lin, Tian Ran, Tan, Andy C. C., Ma, Lin, & Mathew, Joseph (2011) Estimating the loading condition of a diesel engine using instantaneous angular speed analysis. In Lee, Jay (Ed.) Proceedings of the 6th World Congress on Engineering Asset Management, Springer, Duke Energy Center, Cincinatti, Ohio. (In Press)
Lin, Tian Ran, Tan, Andy C. C., Ma, Lin, & Mathew, Joseph (2013) Estimating the loading condition of a diesel engine using instantaneous angular speed analysis. In Lee, Jay (Ed.) Engineering Asset Management 2011: Proceedings of the Sixth Annual World Congress on Engineering Asset Management [Lecture Notes in Mechanical Engineering], Springer, Duke Energy Center, Cincinatti, Ohio, pp. 259-272.
Lin, Tian Ran, Tan, Andy C. C., & Mathew, Joseph (2011) Condition monitoring and diagnosis of injector faults in a diesel engine using in-cylinder pressure and acoustic emission techniques. In Law, S.S., Cheng, Li, Xia, Yong, & Su, Zhongqing (Eds.) Dyanmics for Sustainable Engineering, The HongKong Polytechnic University, Hong Kong Polytechnic University, pp. 454-463.
Lowe, David, Wu, Weiliang , & Tan, Andy (2011) Experimentally induced diesel engine injector faults and some preliminary acoustic emission signal observations. In World Congress on Engineering Asset Management, 3-5 October 2011, Cincinnati, USA. (In Press)
Malik, Husnain, Rakotonirainy, Andry, & Maire, Frederic D. (2009) Correlating eye gaze direction, depth and vehicle information on an interactive map for driver training. In Proceedings of the 2009 Australasian Road Safety Research, Policing and Education Conference : Smarter, Safer Directions, Sydney Convention and Exhibition Centre, Sydney, New South Wales.
Malik, Husnain, Rakotonirainy, Andry, Maire, Frederic D., & Larue, Gregoire (2009) Fusion of in-vehicle sensor data to develop Intelligent Driver Training System (IDTS). In Proceedings of the 21st International Technical Conference on the Enhanced Safety of Vehicles, June 15-18 ,2009, International Congress Center, Stuttgart.
Pham, Phuong X., Bodisco, Timothy A., Ristovski, Zoran D., Brown, Richard J., & Masri, Assaad R. (2014) The influence of fatty acid methyl ester profiles on inter-cycle variability in a heavy duty compression ignition engine. Fuel, 116, pp. 140-150.
Phang, Sammy S., Iskander, D. Robert, & Collins, Michael J. (2003) High Speed Pupillometry. In The 8th Australian and New Zealand Intelligent Information Systems Conference, 10-12 December 2003, Macquarie University, Sydney, Australia.
Rakotonirainy, Andry (2006) Emotional design for in-vehicle technology: A conceptual framework. In 13th World Congress and Exhibition on Intelligent Transport Systems and Services, 8-12 October 2006, London, UK.
Rakotonirainy, Andry (2004) Sustainable context-aware programming for automative applications. In IWSP'04 incorporated in the 2nd International Conference on Pervasive Computing, 18-23 April 2004, Linz / Vienna, Austria.
Rakotonirainy, Andry & Haworth, Narelle L. (2006) Institutional challenges to ITS deployment and adoption. In 29th Australasian Transport Research Forum, 27-29 September 2006, Gold Coast, Queensland.
Rakotonirainy, Andry & Tay, Richard S. (2004) In-vehicle ambient intelligence transport systems: Towards an integrated research. In 7th International IEEE Conference on Intelligent Transportation Systems, 3-6 October 2004, Washingon DC, USA.
Scott-Parker, Bridie & Oviedo-Trespalacios, Óscar (2017) Young driver risky behaviour and predictors of crash risk in Australia, New Zealand and Colombia: Same but different? Accident Analysis & Prevention, 99(Part A), pp. 30-38.
Situ, Rong, Brown, Richard J., Ristovski, Zoran, Kruger, Uli, & Hargreaves, Douglas J. (2008) Analysis of dual fuel compression ignition (diesel) engine. In Masataka, Arai & Daisho, Yasuhiro (Eds.) The Seventh International Conference on Modeling and Diagnostics for Advanced Engine Systems, 28-31 July 2008, Sapporo, Japan.
Tay, Richard S. (2002) Tin cans versus assault vehicles: the role of crashworthiness and non-aggressiveness in vehicle safety design, promotion and regulation. IATSS Research, 26(2), pp. 92-98.
Tay, Richard S. (2002) The prisoner's dilemma and vehicle safety: Some policy implications. Journal of Transport Economics and Policy, 36(3), pp. 491-495.
Thiyahuddin, Izzat, Gu, YuanTong, Gover, Rory, & Thambiratnam, David (2014) Fluid-structure interaction analysis of full scale vehicle-barrier impact using coupled SPH-FEA. Engineering Analysis with Boundary Elements, 42, pp. 26-36.
Webb, Robert M., White, Ryan, & Young, Lachlan (2011) Industrial JIG measurements : survey measurements assisting QUT motorsport. Spatial Science Queensland E-Magazine, pp. 29-35.
Williamson, Ann, Grzebieta, Raphael, Eusebio, Jan, Zheng, Wu Yi, Wall, John, Charlton, Judith L., et al. (2015) The Australian naturalistic driving study: From beginnings to launch. In Proceedings of the 2015 Australasian Road Safety Conference, Gold Coast, Qld.
Wu, Chengtie, Zhang, Yufeng, Zhu, Yufang, Friis, Thor, & Xiao, Yin (2010) Structure–property relationships of silk-modified mesoporous bioglass scaffolds. Biomaterials, 31(13), pp. 3429-3438.
Yan, Cheng, Mai, Yiu-Wing, & Ye, Lin (2001) Effect of bond thickness on fracture behaviour in adhesive joints. Journal of Adhesion, 75(1), pp. 27-44.
Zhang, Zuoyan & Dhanasekar, Manicka (2009) Dynamics of railway wagons subjected to braking/traction torque. Vehicle System Dynamics, 47(3), pp. 285-307.