Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > AUTOMOTIVE ENGINEERING (090200) > Automotive Combustion and Fuel Engineering (incl. Alternative/Renewable Fuels) (090201)"
|Up a level|
- Subjects classification (38541)
- Australian and New Zealand Standard Research Classification (38541)
Group by: Authors/Creators | Item Type
Number of items at this level: 19.
Banks, J, Kelson, N. A., Macintosh, H, Dagg, M, Hayward, R, Bodisco, T, et al. (2014) Calculation of engine parameters using reconfigurable hardware. International Journal of Computational Methods, 11(S1), pp. 1344011-1. (In Press)
Banks, Jasmine Elizabeth, Kelson, Neil A., Macintosh, Hamish, Dagg, Matthew, Hayward, Ross, Bodisco, Timothy A., et al. (2012) Calculation of volume from crank angle using reconfigurable hardware. In 4th International Conference on Computational Methods (ICCM 2012), 25-28 November 2012, Crowne Plaza, Gold Coast, QLD.
Bodisco, Timothy A., Pham, Phuong X., Islam, Aminul, Brown, Richard J., Masri, Assaad R., & Bockhorn, Henning (2013) Ignition delay of bio-fuels in a common-rail compression ignition engine. In Proceedings of the Australian Combustion Symposium, Perth, Western Australia.
Clarke, Stephen Ross, Trout, Neil, Aitchison, Tony, Habibie, Sudirman, & Brown, Richard (2010) Advanced Gen-1, 2 and 3 biofuels research in Australia - Fuelling advanced biofuels training for international scientists. In Chemeca 2010 - Engineering at the Edge, Engineers Australia, Adelaide, South Australia.
Dephoff, Ralph & Mann, Anthony (2006) Reducing Bagasse Consumption at Harwood Mill. In Hogarth, D (Ed.) Proceedings of the Australian Society of Sugar Cane Technologists 2006, 2-5 May 2006, Australia, Queensland, Mackay.
Gonzalez, Felipe, Alsabban, Wesam, & Walker, Rodney A. (2009) Solar powered UAV for fire prevention and planning. [Design/Architectural Work]
He, Jie, Qi, Zhiguo, Zhao, Chihang, & Bao, Xiangtai (2009) Simulations of pollutant dispersion at toll plazas using three-dimensional CFD models. Transportation Research Part D: Transport and Environment, 14(8), pp. 557-566.
Islam, Muhammad Aminul, Ayoko, Godwin A., Brown, Richard J., Stuart, Doug, & Heimann, Kirsten (2013) Influence of fatty acid structure on fuel properties of algae derived biodiesel. Procedia Engineering, 56, pp. 591-596.
Islam, Muhammad Aminul, Brown, Richard J., Heimann, Kirsten, Alvensleben, Nocolas Von, Brooks, Peter, Dowell, Ashley, et al. (2014) Evaluation of a pilot-scale oil extraction from microalgae for biodiesel production. In Ringo, Elena (Ed.) International Scintific Journal, Cité Internationale Universitaire de Paris, France. (In Press)
Jahirul, Mohammed I., Brown, Richard J., Senadeera, Wijitha, & Moghaddam, Lalehvash (2014) Estimation of biodiesel properties from chemical composition – An artificial neural network (ANN) approach. In Ringo, Elena (Ed.) International Conference on Environment and Renewable Energy, City Internationale Universitaire de Paris, France.
Joyce, Kathy, Mann, Anthony, & Plaza, Floren (2006) Improved Estimates of Boiler Performance by Combining Empirical and CFD Models. In Hogarth, D (Ed.) Proceedings of the Australian Society of Sugar Cane Technologists 2006, 2-5 May 2006, Australia, Queensland, Mackay.
Larue, Gregoire S., Malik, Husnain, Rakotonirainy, Andry, & Demmel, Sebastien (2013) Fuel consumption and gas emissions of an automatic transmission vehicle following simple eco-driving instructions on urban roads. IET Intelligent Transport Systems. (In Press)
Pham, Phuong X., Bodisco, Timothy A., Ristovski, Zoran D., Brown, Richard J., & Masri, Assaad R. (2014) The influence of fatty acid methyl ester profiles on inter-cycle variability in a heavy duty compression ignition engine. Fuel, 116, pp. 140-150.
Rao, P.V., Clarke, Stephen, & Brown, Richard (2010) Influence of iodine value on combustion and NOx emission characteristics of a DI diesel engine. In Chemeca 2010: The 40th Australasian Chemical Engineering Conference, Engineers Australia, Adelaide, South Australia.
Situ, Rong, Brown, Richard J., Ristovski, Zoran, Kruger, Uli, & Hargreaves, Douglas J. (2008) Analysis of dual fuel compression ignition (diesel) engine. In Masataka, Arai & Daisho, Yasuhiro (Eds.) The Seventh International Conference on Modeling and Diagnostics for Advanced Engine Systems, 28-31 July 2008, Sapporo, Japan.
Surawski, Nicholas C., Miljevic, Branka, Ristovski, Zoran, Roberts, Boyd A., Ayoko, Godwin A., & Elbagir, Sohair (2010) A comparison of the toxicological properties of diesel engine particulate emissions using two injection technologies and three fuels. In 2010 International Aerosol Conference, 29th August - 3rd Setember 2010, University of Helsinki.
Surawski, Nicholas C., Miljevic, Branka, Roberts, Boyd A., Bodisco, Timothy A., Situ, Rong, Brown, Richard J., et al. (2009) Particulate emissions from a dual-fuel compression ignition engine utilising ethanol fumigation. In 13th ETH Conference on Combustion Generated Nanoparticles, June 22nd-24th 2009, ETH Zurich Switzerland.
Surawski, Nicholas C., Miljevic, Branka, Roberts, Boyd A., Modini, Robin L., Situ, Rong, Brown, Richard J., et al. (2010) Particle emissions, volatility, and toxicity from an ethanol fumigated compression ignition engine. Environmental Science and Technology, 44(1), pp. 229-235.
Zhang, Junfeng & Morawska, Lidia (2002) Combustion sources of particles: 2. Emission factors and measurement methods. Chemosphere, 49(9), pp. 1059-1074.