Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > AUTOMOTIVE ENGINEERING (090200) > Automotive Engineering not elsewhere classified (090299)"
 | Up a level |
- Subjects classification (32824)
- Australian and New Zealand Standard Research Classification (32824)
- ENGINEERING (090000) (4663)
- AUTOMOTIVE ENGINEERING (090200) (81)
- Automotive Engineering not elsewhere classified (090299) (27)
- AUTOMOTIVE ENGINEERING (090200) (81)
- ENGINEERING (090000) (4663)
- Australian and New Zealand Standard Research Classification (32824)
Group by: Authors/Creators | Item Type
Number of items at this level: 27.
Book
Davis, Lloyd E. & Bunker, Jonathan M. (2007) Heavy Vehicle Suspensions – Testing and Analysis. A literature review. Department of Main Roads and the Queensland University of Technology, Brisbane, Queensland, Australia.
1,108
1,108Davis, Lloyd E. & Bunker, Jonathan M. (2009) Suspension testing of 3 heavy vehicles - dynamic wheel force analysis - Report. State of Queensland (Department of Main Roads) & Queensland University of Technology, Brisbane, Queensland, Australia.
605
605Davis, Lloyd E. & Bunker, Jonathan M. (2008) Suspension testing of 3 heavy vehicles – methodology and preliminary frequency analysis. Report. State of Queensland (Department of Main Roads) & Queensland University of Technology, Brisbane, Queensland.
541
541Journal Article
Davis, Lloyd E. & Bunker, Jonathan M. (2011) Altering heavy vehicle air suspension dynamic forces by modifying air lines. International Journal of Heavy Vehicle Systems (IJHVS) I, 18(1), pp. 1-17.
63 
1 
2
63 1 2Davis, Lloyd E., Karl, Charles, Cai, David, Bunker, Jonathan M., Germanchev, Anthony, Eady, Peter, et al. (2010) On-board mass monitoring of heavy vehicles : results of testing program. Road and Transport Research, 19(1), pp. 3-17.
88 1 1
88 1 1Knibbs, Luke D., deDear, Richard, & Morawska, Lidia (2010) Effect of cabin ventilation rate on ultrafine particle exposure inside automobiles. Environmental Science & Technology (including News & Research Notes), 44(9), pp. 3546-3551.
17 15
17 15Yarlagadda, Prasad K. & Somasundaram, S. (1993) A mathematical model for bend-allowance calculation in automated sheet-metal bending. Journal of Materials Processing Technology, 39(3-4), pp. 337-356.
8
8Conference Paper
Bunker, Jonathan & Davis, Lloyd (2008) Larger air lines in heavy vehicle suspensions - differences in wheel and air spring forces. In Rose, G, Morris, J, & Ramsay, E (Eds.) Proceedings of the 31st Australasian Transport Research Forum, 2 - 3 October 2008, Australia, Queensland, Gold Coast.
Chen, Samantha S., Rakotonirainy, Andry, Sheehan, Mary, Krishnaswamy, Shonali, & Loke, Seng Wai (2006) Assessing Crash Risks on Curves. In Australian Road Safety Research, Policing and Education Conference, 25th - 27th October 2006, Gold Coast, Queensland.
656
656Davis, Lloyd E. & Bunker, Jonathan M. (2009) Determining heavy vehicle suspension health from vibratory wheel loads. In Proceedings of 3rd Smart Systems Student Conference, Owen J Wordsworth Room, Queensland University of Technology, Gardens Point, Brisbane.
177
177Davis, Lloyd E. & Bunker, Jonathan M. (2008) In-service suspension testing of heavy vehicles – update on recent test programme and proof-of-concept. In Wrigley, Cara & Lawry, Simon (Eds.) Built Environment and Engineering Postgraduate Student Conference, 10 September 2008, QUT, Brisbane.
184
184Davis, Lloyd E., Bunker, Jonathan M., Karl, Charles, & Cai, David (2010) Tamper evidence for heavy vehicle on board mass systems. In 24th ARRB Conference, 12-15 October 2010, Melbourne.
66
66Davis, Lloyd E., Karl, Charles, Cai, David, & Koniditsiotis, Chris (2009) A regulatory on-board mass monitoring application for heavy vehicles in Australia. In Proceedings of the 16th World Conference on Intelligent Transport Systems and Services, International Fairs (Stockholmsmässan), Stockholm.
148
148Demmel, Sebastien, Larue, Gregoire S., Rakotonirainy, Andry, & Gruyer, Dominique (2011) Using cooperative vehicle systems to collect near collision incidents events : a simulation study. In 2nd International Workshop on Traffic Data Collection & its Standardisation, September 22-23, 2011, Brisbane, Australia.
50
50Derbyshire, Adrian C. & Troutbeck, Rodney J. (2001) Results of a full-scale crash test into an energy absorbing lighting pole on a sloped roadside. In 2001 Road Safety Research, Policing and Education Conference, 18-20 November 2001, Melbourne, Victoria.
716
716Karl, Charles, Cai, David, & Davis, Lloyd E. (2008) The development of an evidentiary on-board massmonitoring application for heavy vehicles. In Proceedings of the 15th World Conference on Intelligent Transport Systems and Services, European Commission, New York, pp. 1-9.
120
120Report
Davis, Lloyd E. & Bunker, Jonathan M. (2008) Characterising heavy vehicle suspensions – impulse testing results and analysis. Main Roads, Brisbane, Australia.
331
331Davis, Lloyd E. & Bunker, Jonathan M. (2009) Heavy vehicle suspension testing and analysis : dynamic load sharing.
1,637
1,637Davis, Lloyd E. & Bunker, Jonathan M. (2009) Heavy vehicle suspensions : testing and analysis. Phase 3 : eigenfrequency peak loads : measuring suspension health from wheel loads [Preliminary test report].
674
674Davis, Lloyd E. & Bunker, Jonathan M. (2008) In-service testing of heavy vehicle suspensions : background report for the NTC project.
172
172Davis, Lloyd E., Bunker, Jonathan M., & Karl, Charles (2008) Technical Feasibility Assessment of On-Board Mass-Monitoring (OBM) Devices: a) Accuracy and robustness b) Ancillary systems analysis. Full-scale testing plan.
253
253Davis, Lloyd E., Bunker, Jonathan M., & Karl, Charles (2008) Technical Feasibility Assessment of On-Board Mass-Monitoring (OBM) Devices: a) Accuracy and robustness b) Ancillary systems analysis. Pilot test plan.
230
230Davis, Lloyd E., Bunker, Jonathan M., & Karl, Charles (2008) Technical Feasibility Assessment of On-Board Mass-Monitoring (OBM) Devices: a) Accuracy and robustness b) Ancillary systems analysis. Pilot test plan.
169
169Davis, Lloyd E., Bunker, Jonathan M., & Karl, Charles (2009) Technical feasibility assessment of On-Board Mass-Monitoring (OBM) devices: a)accuracy and robustness b)ancillary systems analysis : frequency analysis report.
99
99Other
Davis, Lloyd E. & Bunker, Jonathan M. (2008) Development of a software model of a heavy vehicle suspension for research. (Unpublished)
360
360Davis, Lloyd E. & Bunker, Jonathan M. (2008) Heavy Vehicle Suspensions - Testing and Analysis: Phase 3 - eigenfrequency peak loads. Test Plan. (In Press)
917
917Davis, Lloyd E. & Bunker, Jonathan M. (2008) Load-sharing in heavy vehicle suspensions : new metrics for old. (Unpublished)
629
629