Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > BIOMEDICAL ENGINEERING (090300) > Biomedical Instrumentation (090303)"
|Up a level|
- Subjects classification (46975)
- Australian and New Zealand Standard Research Classification (46975)
Group by: Authors/Creators | Item Type
Number of items at this level: 24.
Afara, Isaac , Singh, Sanjleena, & Oloyede, Adekunle (2013) Application of near infrared (NIR) spectroscopy for determining the thickness of articular cartilage. Medical Engineering & Physics, 35(1), pp. 88-95.
Afara, Isaac O., Pawlak, Zenon, & Oloyede, Adekunle (2011) Optical non-destructive evaluation of articular cartilage integrity : a review. In The First International Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 April, 2011., Brisbane.
Alonso-Caneiro, D., Yamanari, M., Fukuda, S., Hoshi , S., Nagase, S., Oshika, T., et al. (2013) Non-invasive assessment of corneal crosslinking changes using polarization sensitive optical coherence tomography. In SPIE Proceedings, Ophthalmic Technologies XXIII, San Francisco, California, 85670F-1.
Asgarifar, Hajarossadat, Oloyede, Adekunle, Zare, Firuz, & Langton, Christian M. (2012) Evaluation cortical bone elasticity in response to pulse power excitation using ultrasonic technique. In Biomedical Engineering / 765: Telehealth / 766: Assistive Technologies, ACTA Press, Innsbruck, Austria.
Bodisco, Timothy A., D'Netto, Jason, Kelson, Neil A., Banks, Jasmine, Hayward, Ross F., & Parker, Tony W. (2014) Characterising an ECG signal using statistical modelling : a feasibility study. The ANZIAM Journal, 55, c32-c46.
Brown, Cameron P., Crawford, Ross W., & Oloyede, Adekunle (2007) Indentation stiffness does not discriminate between normal and degraded articular cartilage. Clinical Biomechanics, 22(7), pp. 843-848.
Brown, Cameron P., Hughes, Stephen W., Crawford, Ross W., & Oloyede, Adekunle (2007) Ultrasound assessment of articular cartilage: Analysis of the frequency profile of reflected signals from naturally and artificially degraded samples. Connective Tissue Research, 48(6), pp. 277-285.
Brown, Cameron P., Moody, Hayley R., Crawford, Ross W., & Oloyede, Adekunle (2007) A novel approach to the development of benchmarking parameters for characterising cartilage health. Connective Tissue Research, 48(1), pp. 52-61.
Frossard, Laurent, Tranberg, Roy, Haggstrom, Eva, Pearcy, Mark J., & Brånemark, Rickard (2010) Load on osseointegrated fixation of a transfemoral amputee during a fall : loading, descent, impact and recovery analysis. Prosthetics and Orthotics International, 34(1), pp. 85-97.
Frossard, Laurent A. (2015) Direct measurement of prosthetic loading for evidence-based practice. Announcement of Instructional Course - ISPO 2015, Lyon, France. (Unpublished)
Gardner, Trevor N. & Mishra, Sanjay K. (2003) The biomechanical environment of a bone fracture and its influence upon the morphology of healing. Medical Engineering and Physics, 25(6), pp. 455-464.
Gildersleeve, Matthew (2013) Mutual enlightenment : augmenting human factors research in surgical robotics. IEEE Pulse, 4(2), pp. 26-31.
Heidarkhan Tehrani, Ashkan, Davari, Pooya, Singh, Sanjleena, & Oloyede, Adekunle (2014) Fine tuning of elasticity via crosslinking collagen-based materials to mediate mechanotransduction and stability using corona treatment. In 23rd Annual Conference of the Australasian Society of Biomaterials and Tissue Engineering, Australian Society for Biomaterials and Tissue Engineering, Mantra Resort Lorne, Victoria, Australia, p. 145.
Inglis, Garry, Dunster, Kimble, & Davies, Mark (2007) Establishing Normal Values of Central Venous Pressure in Very Low Birth Weight Infants. Physiological Measurement, 28, pp. 1283-1291.
Iskander, D. Robert (2006) A parametric approach to measuring limbus corneae from digital images. IEEE Transactions on Biomedical Engineering, 53(6), pp. 1134-1140.
Karnowski, Karol, Alonso-Caneiro, David, Kałużny, Bartłomiej, Kowalczyk, Andrzej , & Wojtkowski, Maciej (2012) Swept source OCT with air puff chamber for corneal dynamics measurements. In Manns, Fabrice, Söderberg, Per G., & Ho, Arthur (Eds.) Ophthalmic Technologies XXII [Progress in Biomedical Optics and Imaging - Proceedings of SPIE], SPIE Press, The Moscone Center, San Francisco, CA, 82090R-1.
Little, J. Paige, Gray, Hans, Murray, David W., Beard, David J., & Gill, Harinderjit S. (2008) Thermal effects of cement mantle thickness for hip resurfacing. Journal of Arthroplasty, 23(3), pp. 454-458.
Little, J. Paige, Taddei, Fulvia, Viceconti, Marco, Murray, David W., & Gill, Harinderjit S. (2007) Changes in femur stress after hip resurfacing arthroplasty: Response to physiological loads. Clinical Biomechanics, 22(4), pp. 440-448.
Mesbah, M., Khlif, M. S., East, C., Smeathers, J., Colditz, P., & Boashash, B. (2011) Accelerometer-based fetal movement detection. In 2011 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), IEEE, Boston, MA, USA, pp. 7877-7880.
Mueller, Daniel, Maeder, Anthony J., & O'Shea, Peter J. (2007) Tracking-based Segmentation and Volume Rendering for Assessing Stenosis of Coronary Arteries in MS-CTA Images. In Gobbetti, E. (Ed.) Computer Graphics and Imaging (CGIM), February 13 – 15, Innsbruck, Austria.
Mueller, Daniel, Slaughter, Richard E., Maeder, Anthony J., & O'Shea, Peter J. (2006) Assessing Coronary Heart Disease in Multi-slice Spiral Computed Tomography Angiography Datasets using Post-process Segmentation and Direct Volume Rendering. In The Austrialasian College of Physical Scientists and Engineers in Medicine (ACPSEM) - Queensland Branch - Local Symposium, 8/05/2006, Royal Brisbane and Womens Hospital Education Centre.
Pather, Shanthan, Epari, Devakara, Frossard, Laurent, Pearcy, Mark, & Burkett, Brendan (2015) The development of a component to improve the loading safety of bone-anchored prostheses. (Unpublished)
Vertriest, Sofie & Frossard, Laurent (2015) Can the direct measurement of the load applied on the residuum of individuals with transfemoral amputation fitted with bone-anchored prosthesis help to improve the rehabilitation program? In XV World Congress of the International Society for Prosthetics and Orthotics (ISPO), 22-25 June 2015, Lyon, France.
Yong, Mostyn R, Saifzadeh, Siamak, Askin, Geoffrey N., Labrom, Robert D., Hutmacher, Dietmar W., & Adam, Clayton J. (2014) Establishment and characterisation of an open mini-thoracotomy surgical approach to an ovine thoracic spine fusion model. Tissue Engineering. Part C. Methods, 20(1), pp. 19-27.