Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > MANUFACTURING ENGINEERING (091000)"
|Up a level|
- Subjects classification (47368)
- Australian and New Zealand Standard Research Classification (47368)
- ENGINEERING (090000) (6549)
- MANUFACTURING ENGINEERING (091000) (157)
- ENGINEERING (090000) (6549)
- Australian and New Zealand Standard Research Classification (47368)
Group by: Authors/Creators | Item Type
Number of items at this level: 47.
Amin, M.A. , Karim, M.A., & Yarlagadda, P.K.D.V. (2010) Assessing the leanness in product design : a model for planned design reuse. In Butee, Suthep, Sapsaman, Temsiri, & Yarlagadda, Prasad K. (Eds.) Proceedings of the 10th Global Congress on Manufacturing and Management - Innovative Design for Sustainability In Manufacturing and Management, Global Congress on Manufacturing and Management Board/King Mongkut's University of Technology North , Century Park Hotel, Bangkok, pp. 39-50.
Amin, Md. Al & Karim, M. Azharul (2011) A systematic approach to evaluate the process improvement in lean manufacturing organizations. In Sustainable manufacturing: Shaping global value creation: Proceedings of the The 9th Global Conference on Sustainable Manufacturing, Springer, LENEXPO Exhibition Center, St. Petersburg, pp. 65-70.
Chiu, Wei-Fen, Gu, YuanTong, Karim, Azharul, & Ma, Lin (2010) A modified quality control method for manufacturing process in mask industry. In 2010 International Conference on Manufacturing Engineering and Automation (ICMEA 2010), 10-12 December 2010, Guangzhou University, Guangzhou, China.
Chowdhury, Israt J. & Nayak, Richi (2014) Identifying product families using data mining techniques in manufacturing paradigm. In Nayak, Richi, Li, Xue, Liu, Lin, Ong, Kok-Leong, Zhao, Yanchang, & Kennedy, Paul (Eds.) Australasian Data Mining Conference (AusDM), 27-28 November 2014, Brisbane, Australia.
Desha, Cheryl & Hargroves, Karlson (2010) Surveying the state of higher education in energy efficiency, in Australian engineering curriculum. Journal of Cleaner Production, 18(7), pp. 652-658.
Dodd, Roland, Chiou, Andrew, Broadfoot, Ross, & Yu, Xing (2010) Composite process models used in stock tank quantity prediction for sugar mill crystallization stage knowledge-based supervisory support. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 224(7), pp. 811-823.
Emadi, Bagher & Yarlagadda, Prasad K. (2006) Peeling pumpkin using rotary cutter. In Global Congress on Manufacturing and Management, November 2006, Santos, Brazil.
Emadi, Bagher, Yarlagadda, Prasad K., & Kosse, Vladis (2007) Abrasive peeling of pumpkin. Journal of Food Engineering, 79(2), pp. 647-656.
Gu, YuanTong & Liu, Gui-Rong (2001) A local point interpolation method (LPIM) for static and dynamic analysis of thin beams. Computer Methods in Applied Mechanics and Engineering, 190(42), pp. 5515-5528.
Gu, YuanTong & Zhang, Liangchi (2006) A simple method for analysing the deformation of nanoelectromechanical switches based on carbon nanotubes. International Journal of Nanomanufacturing, 1(2), pp. 210-222.
Gupta, Rajesh, Ghosh, Arindam, & Joshi, Avinash (2010) Multiband hysteresis modulation and switching characterization for sliding-mode-controlled cascaded multilevel inverter. IEEE Transactions on Industrial Electronics, 57(7), pp. 2344-2353.
Hargreaves, Doug, Stapelberg, Rudolph, Wiliem, Leonard, & Yarlagadda, Prasad (2008) Identification of critical criteria of on-line data acquisition system. In Yarlagadda, P & Gudimetla, P (Eds.) Proceedings of the 9th Global Congress on Manufacturing & Management (GCMM2008), 12 - 14 November 2008, Australia, Queensland, Surfers Paradise.
Karim, Azharul & Hawlader, M. (2005) Mathematical modelling and experimental investigation of tropical fruits drying. International Journal of Heat and Mass Transfer, 48(23-24), pp. 4914-4925.
Karim, M. Azharul, Ernst, Marcel, & Amin, Md. Al (2012) A method for evaluating lean assembly process at design stage. In Seliger, Günther (Ed.) Sustainable Manufacturing: Shaping Global Value Creation, Springer, LENEXPO Exhibition Center, St. Petersburg, pp. 169-174.
Kolarkar, Prakash & Mahendran, Mahen (2008) Thermal performance of plasterboard lined steel stud walls. In 19th International Specialty Conference on Cold-Formed Steel Structures 2008, 14, 16 October, 2008, St. Louis, Missouri USA.
Kosse, Vladis, Iyer, R. Mahalinga, & Yarlagadda, Prasad K. (2008) Teaching manufacturing engineering at tertiary institutions in conjunction with engineering design and engineering materials. Journal of Achievements in Materials and Manufacturing Engineering, 31, pp. 862-866.
Liu, Meinan, Xue, Dongfeng, Zhang, Shouchen, Zhu, Haiyang, Wang, Jiyang, & Kitamura, Kenji (2005) Chemical synthesis of stoichiometric lithium niobate powders. Materials Letters, 59(8-9), pp. 1095-1097.
Lowe, David, Tan, Andy, & Brown, Richard J. (2010) Diesel engine condition monitoring and simulated diesel knock. In Proceedings of 5th World Congress on Applied Mechanics, Engineers Australia, Brisbane, QLD.
Masoud, Mahmoud Mohammed Abd Alla, Kozan, Erhan, & Kent, Geoff (2011) A job-shop scheduling approach for optimising sugarcane rail operations. Flexible Services and Manufacturing Journal, 23(2), pp. 181-206.
Morgan, Dana, Triani, Gerry, Blackford, Mark, Raftery, Tony, Frost, Ray, & Waclawik, Eric (2010) Alkaline hydrothermal kinetics in titanate nanostructure formation. Journal of Materials Science, 46(2), pp. 548-557.
Ni, Qianfu, Lu, Wen Feng, Yarlagadda, Prasad K., & Xinguo, Ming (2006) A collaborative engine for enterprise application integration. Computers in Industry, 57(7), pp. 640-652.
Palmer, Sara & Frost, Ray (2009) Characterisation of bauxite and seawater neutralised bauxite residue using XRD and vibrational spectroscopic techniques. Journal of Material Science, 44(1), pp. 55-63.
Park, Dong Hwan & Yarlagadda, Prasad K. (2005) Industrial application of surface area calculating system (SACS) in non-axisymmetric deep drawing process. Journal of Materials Processing Technology, 164-165, pp. 1578-1583.
Park, Yoosup, Doherty, William O.S., & Halley, Peter J. (2008) Developing Lignin-Based Resin Coatings and Composites. Industrial Crops and Products, 27(2), pp. 163-167.
Praveen, P., Kang, Mun-Jin, & Yarlagadda, Prasad K.D.V. (2009) Arc voltage behavior in GMAW-P under different drop transfer modes. Journal of Achievements in Materials and Manufacturing Engineering, 32(2), pp. 196-202.
Rathnayaka Mudiyanselage, Charith Malinga, Karunasena, Helambage Chaminda Prasad, Gu, YuanTong, Guan, Lisa, Banks, Jasmine, & Senadeera, Wijitha (2016) A 3-D meshfree numerical model to analyze cellular scale shrinkage of different categories of fruits and vegetables during drying. In Proceedings of the 7th International Conference on Computational Methods, Scientech Publisher llc, University of California at Berkeley, CA.
Shukla, Anshuman, Ghosh, Arindam, & Joshi, Avinash (2010) Flying-capacitor-based chopper circuit for DC capacitor voltage balancing in diode-clamped multilevel inverter. IEEE Transactions on Industrial Electronics, 57(7), pp. 2249-2261.
Stuart, Kari & Kozan, Erhan (2011) Reactive scheduling model for the operating theatre. Flexible Services and Manufacturing Journal, Online(Online), pp. 1-22.
The, Jaya Suteja, Yarlagadda, Prasad K.D.V., Karim, Azharul, & Yan, Cheng (2014) An activity and resource advisory system for manufacturing process chains selection at the early stage of product development. Advanced Materials Research, 834-836(2014), pp. 1927-1931.
The, Jaya Suteja, Yarlagadda, Prasad K.D.V., Karim, Azharul, & Yan, Cheng (2013) A framework for life cycle cost estimation of a product family at the early stage of product development. Advanced Materials Research, 605-607, pp. 222-227.
Turner, Ian, Rousset, Patrick, Remond, Romain, & Perre, Patrick (2010) An experimental and theoretical investigation of the thermal treatment of wood (Fagus sylvatica L.) in the range 200-260 °C. International Journal of Heat and Mass Transfer, 53(4), pp. 715-725.
Wallace, Andrew D., Boerkamp, Martijn, Lye, Peter G., Lamb, David W., Doherty, William O.S., & Fellows, Christopher M. (2008) Assessment of an intrincis optical fiber sensor for in Situ monitoring of scale-forming salts. Industrial & Engineering Chemistry Research, 47(4), pp. 1066-1070.
Watcharaphassakorn, Methinee & Yarlagadda, Prasad K.D.V. (2014) Reducing bubble defect on the outsole production process in the footwear manufacturing industry. Advanced Materials Research, 988, pp. 759-763.
Wu, Chengtie & Chang, Jiang (2007) Bonelike apatite formation on carbon microspheres. Materials Letters, 61(11-12), pp. 2502-2505.
Yan, Cheng, Mai, Yiu-Wing, & Ye, Lin (2001) Effect of bond thickness on fracture behaviour in adhesive joints. Journal of Adhesion, 75(1), pp. 27-44.
Yan, Chenglin, Zou, Longjiang, Xue, Dongfeng, Xu, Jiasheng, & Liu, Meinan (2008) Chemical tuning polymorphology of functional materials by hydrothermal and solvothermal reactions. Journal of Materials Science, 43(7), pp. 2263-2269.
Yang, Jing, Baker, Adrian, Liu, Hongwei, Martens, Wayde, & Frost, Ray (2010) Size-controllable synthesis of chromium oxyhydroxide nanomaterials using a soft chemical hydrothermal route. Journal of Materials Science, 45(24), pp. 6574-6585.
Yarlagadda, Prasad K. & Cheok, E.C. (1998) Study on the microwave curing of adhesive joints using a temperature-controlled feedback system. Journal of Materials Processing Technology, 91(1-3), pp. 128-149.
Yarlagadda, Prasad K., Christodoulou, Periklis, & Subramanian, Vijay S. (1999) Feasibility studies on the production of electro-discharge machining electrodes with rapid prototyping and the electroforming process. Journal of Materials Processing Technology, 89-90(-), pp. 231-237.
Yarlagadda, Prasad K., Hoon, Cheng Heng, & Thian, Ng Meng (2000) Feasibility Studies on Recycling of Waste by Using Microwave Curing. In Taraman, K. & Salem, H. (Eds.) 2000 Pacific Conference on Manufacturing, September 2000, Detroit, USA.
Yarlagadda, Prasad K., Rao, K.P., & Hawbolt, E. Bruce (1996) Hot Deformation Studies On A Low-Carbon Steel: Part 1 - Flow Curves And The Constitutive Relationship. Journal of Materials Processing Technology, 56(1-4), pp. 897-907.
Yarlagadda, Prasad K. & Soon, Raymond Chong Tai (1998) Characterisation of materials behaviour in microwave joining of ceramics. Journal of Materials Processing Technology, 84(1-3), pp. 162-174.
Yarlagadda, Prasad K.D.V. & Somasundaram, S. (1992) CADDS: an automated die design system for sheet-metal blanking. Computing & Control Engineering Journal, 3(4), pp. 185-191.
Yarlagadda, Prasad K.D.V. & Somasundaram, S. (1991) CASNS - A heuristic algorithm for the nesting of irregular-shaped sheet-metal blanks. Computer-Aided Engineering Journal, 8(2), pp. 69-73.
Zarea Fazlelahi, Forough, Pournader, Mehrdokht, Gharakhani, Mohsen, & Sadjadi, Seyed Jafar (2015) A robust approach to design a single facility layout plan in dynamic manufacturing environments using a permutation-based genetic algorithm. Journal of Engineering Manufacture. (In Press)
Zhao, Yanyan, Yang, Jeanne, Frost, Ray, Kristof, Janos, & Horvath, Erzsebet (2009) Synthesis, characterization and thermal analysis of Fe-doped boehmite nanofibres and nanosheets. Journal of Materials Science, 44(14), pp. 3662-3673.
Zheng, Connie, Soosay, Claudine, & Hyland, Paul (2008) Manufacturing to Asia: who will win the emerging battle for talent between Dragons and Tigers? Journal of Manufacturing Technology Management, 19(1), pp. 52-72.