Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > MANUFACTURING ENGINEERING (091000)"
|Up a level|
- Subjects classification (46165)
- Australian and New Zealand Standard Research Classification (46165)
- ENGINEERING (090000) (6359)
- MANUFACTURING ENGINEERING (091000) (153)
- ENGINEERING (090000) (6359)
- Australian and New Zealand Standard Research Classification (46165)
Group by: Authors/Creators | Item Type
Number of items at this level: 46.
Desha, Cheryl & Hargroves, Karlson (2010) Surveying the state of higher education in energy efficiency, in Australian engineering curriculum. Journal of Cleaner Production, 18(7), pp. 652-658.
Dodd, Roland, Chiou, Andrew, Broadfoot, Ross, & Yu, Xing (2010) Composite process models used in stock tank quantity prediction for sugar mill crystallization stage knowledge-based supervisory support. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 224(7), pp. 811-823.
Emadi, Bagher, Yarlagadda, Prasad K., & Kosse, Vladis (2007) Abrasive peeling of pumpkin. Journal of Food Engineering, 79(2), pp. 647-656.
Gu, YuanTong & Liu, Gui-Rong (2001) A local point interpolation method (LPIM) for static and dynamic analysis of thin beams. Computer Methods in Applied Mechanics and Engineering, 190(42), pp. 5515-5528.
Gu, YuanTong & Zhang, Liangchi (2006) A simple method for analysing the deformation of nanoelectromechanical switches based on carbon nanotubes. International Journal of Nanomanufacturing, 1(2), pp. 210-222.
Gupta, Rajesh, Ghosh, Arindam, & Joshi, Avinash (2010) Multiband hysteresis modulation and switching characterization for sliding-mode-controlled cascaded multilevel inverter. IEEE Transactions on Industrial Electronics, 57(7), pp. 2344-2353.
Karim, Azharul & Hawlader, M. (2005) Mathematical modelling and experimental investigation of tropical fruits drying. International Journal of Heat and Mass Transfer, 48(23-24), pp. 4914-4925.
Kosse, Vladis, Iyer, R. Mahalinga, & Yarlagadda, Prasad K. (2008) Teaching manufacturing engineering at tertiary institutions in conjunction with engineering design and engineering materials. Journal of Achievements in Materials and Manufacturing Engineering, 31, pp. 862-866.
Liu, Meinan, Xue, Dongfeng, Zhang, Shouchen, Zhu, Haiyang, Wang, Jiyang, & Kitamura, Kenji (2005) Chemical synthesis of stoichiometric lithium niobate powders. Materials Letters, 59(8-9), pp. 1095-1097.
Masoud, Mahmoud Mohammed Abd Alla, Kozan, Erhan, & Kent, Geoff (2011) A job-shop scheduling approach for optimising sugarcane rail operations. Flexible Services and Manufacturing Journal, 23(2), pp. 181-206.
Morgan, Dana, Triani, Gerry, Blackford, Mark, Raftery, Tony, Frost, Ray, & Waclawik, Eric (2010) Alkaline hydrothermal kinetics in titanate nanostructure formation. Journal of Materials Science, 46(2), pp. 548-557.
Ni, Qianfu, Lu, Wen Feng, Yarlagadda, Prasad K., & Xinguo, Ming (2006) A collaborative engine for enterprise application integration. Computers in Industry, 57(7), pp. 640-652.
Palmer, Sara & Frost, Ray (2009) Characterisation of bauxite and seawater neutralised bauxite residue using XRD and vibrational spectroscopic techniques. Journal of Material Science, 44(1), pp. 55-63.
Park, Dong Hwan & Yarlagadda, Prasad K. (2005) Industrial application of surface area calculating system (SACS) in non-axisymmetric deep drawing process. Journal of Materials Processing Technology, 164-165, pp. 1578-1583.
Park, Yoosup, Doherty, William O.S., & Halley, Peter J. (2008) Developing Lignin-Based Resin Coatings and Composites. Industrial Crops and Products, 27(2), pp. 163-167.
Praveen, P., Kang, Mun-Jin, & Yarlagadda, Prasad K.D.V. (2009) Arc voltage behavior in GMAW-P under different drop transfer modes. Journal of Achievements in Materials and Manufacturing Engineering, 32(2), pp. 196-202.
Shukla, Anshuman, Ghosh, Arindam, & Joshi, Avinash (2010) Flying-capacitor-based chopper circuit for DC capacitor voltage balancing in diode-clamped multilevel inverter. IEEE Transactions on Industrial Electronics, 57(7), pp. 2249-2261.
Stuart, Kari & Kozan, Erhan (2011) Reactive scheduling model for the operating theatre. Flexible Services and Manufacturing Journal, Online(Online), pp. 1-22.
The, Jaya Suteja, Yarlagadda, Prasad K.D.V., Karim, Azharul, & Yan, Cheng (2014) An activity and resource advisory system for manufacturing process chains selection at the early stage of product development. Advanced Materials Research, 834-836(2014), pp. 1927-1931.
The, Jaya Suteja, Yarlagadda, Prasad K.D.V., Karim, Azharul, & Yan, Cheng (2013) A framework for life cycle cost estimation of a product family at the early stage of product development. Advanced Materials Research, 605-607, pp. 222-227.
Turner, Ian, Rousset, Patrick, Remond, Romain, & Perre, Patrick (2010) An experimental and theoretical investigation of the thermal treatment of wood (Fagus sylvatica L.) in the range 200-260 °C. International Journal of Heat and Mass Transfer, 53(4), pp. 715-725.
Wallace, Andrew D., Boerkamp, Martijn, Lye, Peter G., Lamb, David W., Doherty, William O.S., & Fellows, Christopher M. (2008) Assessment of an intrincis optical fiber sensor for in Situ monitoring of scale-forming salts. Industrial & Engineering Chemistry Research, 47(4), pp. 1066-1070.
Watcharaphassakorn, Methinee & Yarlagadda, Prasad K.D.V. (2014) Reducing bubble defect on the outsole production process in the footwear manufacturing industry. Advanced Materials Research, 988, pp. 759-763.
Wu, Chengtie & Chang, Jiang (2007) Bonelike apatite formation on carbon microspheres. Materials Letters, 61(11-12), pp. 2502-2505.
Yan, Cheng, Mai, Yiu-Wing, & Ye, Lin (2001) Effect of bond thickness on fracture behaviour in adhesive joints. Journal of Adhesion, 75(1), pp. 27-44.
Yan, Chenglin, Zou, Longjiang, Xue, Dongfeng, Xu, Jiasheng, & Liu, Meinan (2008) Chemical tuning polymorphology of functional materials by hydrothermal and solvothermal reactions. Journal of Materials Science, 43(7), pp. 2263-2269.
Yang, Jing, Baker, Adrian, Liu, Hongwei, Martens, Wayde, & Frost, Ray (2010) Size-controllable synthesis of chromium oxyhydroxide nanomaterials using a soft chemical hydrothermal route. Journal of Materials Science, 45(24), pp. 6574-6585.
Yarlagadda, Prasad K. & Cheok, E.C. (1998) Study on the microwave curing of adhesive joints using a temperature-controlled feedback system. Journal of Materials Processing Technology, 91(1-3), pp. 128-149.
Yarlagadda, Prasad K., Christodoulou, Periklis, & Subramanian, Vijay S. (1999) Feasibility studies on the production of electro-discharge machining electrodes with rapid prototyping and the electroforming process. Journal of Materials Processing Technology, 89-90(-), pp. 231-237.
Yarlagadda, Prasad K., Rao, K.P., & Hawbolt, E. Bruce (1996) Hot Deformation Studies On A Low-Carbon Steel: Part 1 - Flow Curves And The Constitutive Relationship. Journal of Materials Processing Technology, 56(1-4), pp. 897-907.
Yarlagadda, Prasad K. & Soon, Raymond Chong Tai (1998) Characterisation of materials behaviour in microwave joining of ceramics. Journal of Materials Processing Technology, 84(1-3), pp. 162-174.
Yarlagadda, Prasad K.D.V. & Somasundaram, S. (1992) CADDS: an automated die design system for sheet-metal blanking. Computing & Control Engineering Journal, 3(4), pp. 185-191.
Yarlagadda, Prasad K.D.V. & Somasundaram, S. (1991) CASNS - A heuristic algorithm for the nesting of irregular-shaped sheet-metal blanks. Computer-Aided Engineering Journal, 8(2), pp. 69-73.
Zarea Fazlelahi, Forough, Pournader, Mehrdokht, Gharakhani, Mohsen, & Sadjadi, Seyed Jafar (2015) A robust approach to design a single facility layout plan in dynamic manufacturing environments using a permutation-based genetic algorithm. Journal of Engineering Manufacture. (In Press)
Zhao, Yanyan, Yang, Jeanne, Frost, Ray, Kristof, Janos, & Horvath, Erzsebet (2009) Synthesis, characterization and thermal analysis of Fe-doped boehmite nanofibres and nanosheets. Journal of Materials Science, 44(14), pp. 3662-3673.
Zheng, Connie, Soosay, Claudine, & Hyland, Paul (2008) Manufacturing to Asia: who will win the emerging battle for talent between Dragons and Tigers? Journal of Manufacturing Technology Management, 19(1), pp. 52-72.
Amin, M.A. , Karim, M.A., & Yarlagadda, P.K.D.V. (2010) Assessing the leanness in product design : a model for planned design reuse. In Butee, Suthep, Sapsaman, Temsiri, & Yarlagadda, Prasad K. (Eds.) Proceedings of the 10th Global Congress on Manufacturing and Management - Innovative Design for Sustainability In Manufacturing and Management, Global Congress on Manufacturing and Management Board/King Mongkut's University of Technology North , Century Park Hotel, Bangkok, pp. 39-50.
Amin, Md. Al & Karim, M. Azharul (2011) A systematic approach to evaluate the process improvement in lean manufacturing organizations. In Sustainable manufacturing: Shaping global value creation: Proceedings of the The 9th Global Conference on Sustainable Manufacturing, Springer, LENEXPO Exhibition Center, St. Petersburg, pp. 65-70.
Chiu, Wei-Fen, Gu, YuanTong, Karim, Azharul, & Ma, Lin (2010) A modified quality control method for manufacturing process in mask industry. In 2010 International Conference on Manufacturing Engineering and Automation (ICMEA 2010), 10-12 December 2010, Guangzhou University, Guangzhou, China.
Emadi, Bagher & Yarlagadda, Prasad K. (2006) Peeling pumpkin using rotary cutter. In Global Congress on Manufacturing and Management, November 2006, Santos, Brazil.
Hargreaves, Doug, Stapelberg, Rudolph, Wiliem, Leonard, & Yarlagadda, Prasad (2008) Identification of critical criteria of on-line data acquisition system. In Yarlagadda, P & Gudimetla, P (Eds.) Proceedings of the 9th Global Congress on Manufacturing & Management (GCMM2008), 12 - 14 November 2008, Australia, Queensland, Surfers Paradise.
Karim, M. Azharul, Ernst, Marcel, & Amin, Md. Al (2012) A method for evaluating lean assembly process at design stage. In Sustainable manufacturing: Shaping global value creation: Proceedings of the The 9th Global Conference on Sustainable Manufacturing, Springer, LENEXPO Exhibition Center, St. Petersburg, pp. 169-174.
Kolarkar, Prakash & Mahendran, Mahen (2008) Thermal performance of plasterboard lined steel stud walls. In 19th International Specialty Conference on Cold-Formed Steel Structures 2008, 14, 16 October, 2008, St. Louis, Missouri USA.
Lowe, David, Tan, Andy, & Brown, Richard J. (2010) Diesel engine condition monitoring and simulated diesel knock. In Proceedings of 5th World Congress on Applied Mechanics, Engineers Australia, Brisbane, QLD.
Yarlagadda, Prasad K., Hoon, Cheng Heng, & Thian, Ng Meng (2000) Feasibility Studies on Recycling of Waste by Using Microwave Curing. In Taraman, K. & Salem, H. (Eds.) 2000 Pacific Conference on Manufacturing, September 2000, Detroit, USA.
Chowdhury, Israt J. & Nayak, Richi (2014) Identifying product families using data mining techniques in manufacturing paradigm. In Nayak, Richi, Li, Xue, Liu, Lin, Ong, Kok-Leong, Zhao, Yanchang, & Kennedy, Paul (Eds.) Australasian Data Mining Conference (AusDM), 27-28 November 2014, Brisbane, Australia.