Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > MANUFACTURING ENGINEERING (091000) > Manufacturing Management (091005)"
|Up a level|
- Subjects classification (47440)
- Australian and New Zealand Standard Research Classification (47440)
Group by: Authors/Creators | Item Type
Number of items at this level: 21.
Al Owad, Ali, Karim, M. A., & Ma, Lin (2013) Integrated Lean Six Sigma approach for patient flow improvement in hospital emergency department. Advanced Materials Research, 834-836, pp. 1893-1902.
Gudimetla, Prasad, Allimuthu, P.S., Chintala, G.V., & Yarlagadda, Prasad K. (2010) Diffusion of business improvement processes in manufacturing companies in India. In Proceedings of the Third International and Twenty-fourth All India Manufacturing Technology, Design and Research Conference - Global Trends and Challenges in design and Manufactoring, Andhra University College of Engineering (A) , pp. 739-744.
Halgamuge, Saman, Karim, Azharul, & Smith, Alan (2008) Empirical relationships between some manufacturing practices and performance. International Journal of Production Research, 46(13), pp. 3583-3613.
Hsiao, David, Trappey, Amy, Ma, Lin, & Ho, Pei-Shun (2009) An integrated platform of collaborative project management and silicon intellectual property management for IC design industry. Information Sciences, 179(15), pp. 2576-2590.
Huang, T.T., Stewart, R.A., & Chen, L. (2008) Empirical study to identify the key business activities contributing to manufacturing business performance. Journal of Achievements in Materials and Manufacturing Engineering, 31(2), pp. 747-755.
Huang, T.T., Stewart, R.A., & Chen, Le (2009) Knowledge sharing leveraging new product development activities to derive enhanced business performance : mixed method study. In IEEM 2009 - IEEE International Conference on Industrial Engineering and Engineering Management, IEEE, Hong Kong, pp. 88-92.
Huang, T.T., Stewart , R.A., & Chen, L. (2008) Knowledge sharing for strengthening manufacturing operation and business performance. In 2008 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2008), IEEE , Singapore, 1930-1934 .
Huang, Tsu-te (Andrew), Chen, Le, Stewart, Rodney A. , & Panuwatwanich, Kriengsak (2013) Leveraging power of learning capability upon manufacturing operations. International Journal of Production Economics, 145(1), pp. 233-252.
Islam, A., Al Owad, A. M. M., Badraig, O. M., Ma, L., & Karim, M. A. (2014) Factors affecting new project delays in Saudi Arabian manufacturing organisations. In 2014 IEEE International Conference on Management of Innovation and Technology (ICMIT), IEEE, Singapore.
Islam, A., Karim, A., & Russ, G. (2008) Detection of faulty products using data mining. In Ali, Shawkat & Hassan, Rafiul (Eds.) Proceedings of 1st International Workshop on Data Mining and Artificial Intelligence (DMAI 2008), 25 - 27 December 2008, Bangladesh, Khulna.
Islam, Mazharul & Karim, Azharul (2008) Failure mode and effect analysis: use, effectiveness and difficulties. In Yarlagadda, P & Gudimetla, P (Eds.) Proceedings of the 9th Global Congress on Manufacturing and Management (GCMM2008), 12 - 14 November 2008, Australia, Queensland, Surfers Paradise.
Karim, A., Smith, A.J.R, Halgamuge, S.K, & Islam, M.M (2008) A comparative study of manufacturing practices and performance variables. International Journal of Production Economics, 112(2), pp. 841-859.
Karim, Azharul (2009) A conceptual model for manufacturing performance improvement. Journal of Achievements in Materials and Manufacturing Engineering, 35(1), pp. 87-94.
Karim, Azharul, Alam, M.R., & Amin, Md Al (2010) Lean manufacturing strategy in a make to order manufacturing environment. ASOR Bulletin, 29(3), pp. 34-47.
Karim, Azharul, Alam, Mohammad, & Amin, Md (2009) Implementing lean manufacturing strategy in a small manufacturing company: a model for change. In Kozan, E (Ed.) Proceedings of the 20th National Conference of Australian Society for Operations Research incorporating the 5th International Intelligent Logistics System Conference, 27 - 30 September 2009, Australia, Queensland, Gold Coast.
Karim, Azharul, Murdi M Aljuhani, Mubarak, Duplock, Ray, & Yarlagadda, Prasad K. (2011) Implementation of lean manufacturing in Saudi manafacturing organisations : an empirical study. Advanced Materials Research - Proceedings of the 2011 International Conference on Materials and Products Manufacturing Technology (MPMT 2011), 339, pp. 250-253.
Karim, Azharul, Samaranayake, P, Smith, A., & Halgamuge, Saman (2009) An on-time delivery improvement model for manufacturing organisations. International Journal of Production Research, 48(8), pp. 2373-2394.
Lees, Michael, Campbell, Duncan A., & Keir, Andrew G. (2008) Machine vision for beer keg asset management. In Billingsley, John & Bradbeer, Robin (Eds.) Mechatronics and machine vision in practice. Springer Berlin / Heidelberg, Berlin, pp. 125-137.
Nekoufar, Saviz & Karim, Azharul (2011) Lean project management in large scale industrial project via standardization. Project Perspectives, XXXIII, pp. 72-77.
Paul, Gunther, Reed, Matthew, & Wang, Xuguang (2012) Preface to special issue on digital human modelling for vehicle design and manufacturing. International Journal of Human Factors Modelling and Simulation, 3(3/4).
Zaman, Kazi Arif-Uz-Zaman & Karim, Azharul (2011) Triangular Linguistic Fuzzy based performance measurement model for supply chain to assess leanness attributes. In (Ed.) International Conference on Agile Manufacturing Systems, 18-20 December 2011, Dayalbagh Educational Institute, Agra, India.