Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > MATERIALS ENGINEERING (091200)"
 | Up a level |
- Subjects classification (32824)
- Australian and New Zealand Standard Research Classification (32824)
- ENGINEERING (090000) (4663)
- MATERIALS ENGINEERING (091200) (330)
- Ceramics (091201) (44)
- Glass (091206) (2)
- MATERIALS ENGINEERING (091200) (330)
- ENGINEERING (090000) (4663)
- Australian and New Zealand Standard Research Classification (32824)
Group by: Authors/Creators | Item Type
Number of items at this level: 148.
Book Chapter
Heidarkhan Tehrani, A. & Haghi, A.K. (2009) Technological advances in geotextiles. In Jimenez, Alfonso & Zaikov, Gennady E. (Eds.) Recent Advances in Research on Biodegradable Polymers and Sustainable Composites (Vol. 3). NOVA Science Publishers, Inc, New York, pp. 11-21.
Journal Article
Ahsan, M., Tesfamichael, T., Ponzoni, A., & Faglia, G. (2011) Sensing properties of e-beam evaporated nanostructured pure and iron-doped tungsten oxide thin films. Sesnors Letters, 9(2), pp. 759-762.
3 
3
3 3Ahsan, Mohammed, Tesfamichael, Tuquabo, Ionescu, Mehail, Bell, John M., & Motta, Nunzio (2012) Low temperature CO sensitive nanostructured WO3 thin films doped with Fe. Sensors and Actuators B : Chemical, 162(1), pp. 14-21.
9 1 1
9 1 1Aitchison, Tony, Ginic-Markovic, Milena, Saunders, Martin, Fredericks, Peter, Valiyaveettil, Suresh, Matisons, Janis, et al. (2011) Polymer brushes on multiwalled carbon nanotubes by activators regenerated by electron transfer for atom transfer radical polymerization. Journal of Polymer Science, Part A: Polymer Chemistry, 49(19), pp. 4283-4291.
2 2
2 2Bell, John & Rybachuk, Maksym (2006) The Observation of sp(2) Fraction Disorder Using Dual Wavelength Raman Spectroscopy in a-C:H Films Fabricated Using an Open Inductively Coupled Plasma Reactor. Diamond and Related Materials, 15(4-8), pp. 977-981.
6 6
6 6Bernardi, Marco, Giulianini, Michele, & Grossman, Jeffery (2010) Self-assembly and its impact on interfacial charge transfer in carbon nanotube/P3HT solar cells. ACS Nano, 4(11), pp. 6599-6606.
28 23
28 23Blakey, Idriss, Billingham, N, & George, Graeme (2007) Use of 9,10-Diphenylanthracene As a Contrast Agent in Chemiluminescence Imaging: The Observation of Spreading of Oxidative Degradation in Thin Polypropylene Films. Polymer Degradation and Stability, 92(11), pp. 2102-2109.
1 1
1 1Bott, Katrin, Upton, Zee, Schrobback, Karsten, Ehrbar, Martin, Hubbell, Jeffrey, Lutolf, Matthias, et al. (2010) The effect of matrix characteristics on fibroblast proliferation in 3D gels. Biomaterials, 31(32), pp. 8454-8464.
31 28
31 28Brown, Cameron, Crawford, Ross, & Oloyede, A. (2008) In search of a parameter to distinguish viable from non-viable articular cartilage: indentation and ultrasound studies. Advanced Materials Research, 32, pp. 223-228.
Cao, Yang, Croll, Tristan, O'Connor, Andrea, Stevens, Geoffrey, & Cooper-White, Justin (2006) Systematic selection of solvents for the fabrication of 3D combined macro and microporous polymeric scaffolds for soft tissue engineering. Journal of Biomaterials Science. Polymer Edition, 17(4), pp. 369-402.
11 13
11 13Celina, Mathew, Dargaville, Tim R., Assink, Roger A., & Martin, Jeffrey W. (2005) Selection and optimization of piezoelectric polyvinylidene fluoride polymers for adaptive optics in space environments. High Performance Polymers, 17(4), pp. 575-592.
4 5
4 5Chandler-Temple, Adrienne, Wentrup-Byrne, Edeline, Whittaker, Andrew, & Grondahl, Lisbeth (2010) Graft copolymerization of methoxyacrylethyl phosphate onto expanded poly(tetrafluoroethylene) facial membranes. Journal of Applied Polymer Science, 117(6), pp. 3331-3339.
5 6
5 6Chen, Hongtao, Wang, Chunqing, Yan, Cheng, Huang, Y., & Tian, Yanhong (2007) Effects of solder volume on formation and redeposition of Au-containing intermetallics in Au/Ni-SnAgCu-Ni(P) solder joints. Journal of Electronic Materials, 36(1), pp. 33-39.
182 6 6
182 6 6Chen, Hongtao, Wang, Chunqing, Yan, Cheng, Li, Mingyu, & Huang, Y. (2007) Cross-interaction of interfacial reactions in Ni (Au/Ni/Cu)-SnAg-Cu solder joints during reflow soldering and thermal aging. Journal of Electronic Materials, 36(1), pp. 26-32.
273 13 12
273 13 12Chirila, Traian, Barnard, Zeke, Zainuddin, Zein, & Harkin, Damien (2007) Silk as Substratum for Cell Attachment and Proliferation. Materials Science Forum, 561-56(2007), pp. 1549-1552.
8 9
8 9Colwell, John, Khan, Javaid, Will, Geoffrey, Fairfull-Smith, Kathryn, Bottle, Steven, George, Graeme, et al. (2010) Prognostic tools for lifetime prediction of aircraft coatings: Paint degradation. Advanced Materials Research, 138, pp. 137-149.
1 1
1 1Colwell, John, Walker, James, Blinco, James, Micallef, Aaron, George, Graeme, & Bottle, Steven (2010) Profluorescent nitroxides: Thermo-oxidation sensors for stabilised polypropylene. Polymer Degradation and Stability, 95(10), pp. 2101-2109.
2 2
2 2Dai, C.Y., Zhang, G.P., & Yan, C. (2011) Size effects on tensile and fatigue behaviour of polycrystalline metal foils at the micrometer scale. Philosophical Magazine, 91(6), pp. 932-945.
39 6 4
39 6 4Darcy, Greg & Mahendran, Mahen (2008) Development of a new cold-formed steel building system. Advances in Structural Engineering, 11(6), pp. 661-677.
480
480Dargaville, Tim R., Celina, Mathew, & Chaplya, Pavel M. (2005) Evaluation of piezoelectric poly(vinylidene fluoride) polymers for use in space environments. I. Temperature limitations. Journal of Polymer Science Part B : Polymer Physics, 43(11), pp. 1310-1320.
23 23
23 23Dargaville, Tim R., Celina, Mathew, Martin, Jeffrey W., & Banks, Bruce A. (2005) Evaluation of piezoelectric PVDF polymers for use in space environments. II. Effects of atomic oxygen and vacuum UV exposure. Journal of Polymer Science Part B: Polymer Physics, 43(18), pp. 2503-2513.
144 6 8
144 6 8Dargaville, Tim R., Elliott, Julie M., & Celina, Mathew (2006) Evaluation of piezoelectric PVDF polymers for use in space environments. III. Comparison of the effects of vacuum UV and gamma radiation. Journal of Polymer Science Part B : Polymer Physics, 44(22), pp. 3253-3264.
4 5
4 5De Pellegrin, Dennis & Torrance, Andrew (2009) Abrasive surfaces measured by digital optical stereopsis. Advanced Materials Research, 76-78(N/A), pp. 465-470.
Deng, S.T., Diao, H., Chen, Y.L., Yan, C., Zhang, H.F., Wang, A.M., et al. (2010) Metallic glass fiber-reinforced Zr-based bulk metallic glass. Scripta Materialia, 64(1), pp. 85-88.
2 3
2 3Diao, H., Yan, C., Bell, J. M., Lu, L., Zhang, G. P., Karba, S., et al. (2010) Compressive behaviour of nanocrystallilne Mg-5%Al alloys. Modern Physics Letters B. (In Press)
99
99Diao, Hui (2008) Bonding of aluminum alloy by hot-dipping tin coating. Advanced Materials Research, 32, pp. 93-98.
108 1
108 1Doherty, William, Halley, Peter, Edye, Leslie, Rogers, David, Cardona, Francisco, Park, Yoosup, et al. (2007) Studies on Polymers and Composites from Lignin and Fiber Derived from Sugar Cane. Polymers for Advanced Technologies, 18(8), pp. 673-678.
11 7
11 7Ekaputra, Andrew Krishna, Prestwich, Glenn, Cool, Simon, & Hutmacher, Dietmar (2011) The three-dimensional vascularization of growth factor-releasing hybrid scaffold of poly (e{open}-caprolactone)/collagen fibers and hyaluronic acid hydrogel. Biomaterials, 32(32), pp. 8108-8117.
19 19
19 19Flitt, Harvey & Schweinsberg, Paul (2010) Synthesis, matching and deconstruction of polarization curves for the active corrosion of zinc in aerated near-neutral NaCl solutions. Corrosion Science, 52(6), pp. 1905-1914.
8 5
8 5Gadomski, A, Pawlak, Zenon, & Oloyede, A. (2008) Directed ion transport as virtual cause of some facilitated friction-lubrication mechanism prevailing in articular cartilage: A hypothesis. Tribology Letters, 30(2), pp. 83-90.
4 3
4 3Gao, Xue, Lan, Ying, Zhu, Huai, Liu, J, Ge, Y, Wu, F, et al. (2005) Electrochemical performance of anatase nanotubes converted from protonated titanate hydrate nanotubes. Electrochemical and Solid-State Letters, 8(1), A26-A29.
67 66
67 66Gibson, Ian, Savalani, Monica, Lam, Christopher, Olkowski, Radoslow, Ekaputra, A, Tan, Kim Cheng, et al. (2009) Towards a medium/high load-bearing scaffold fabrication system. Tsinghua Science and Technology, 14(1), pp. 13-19.
Gu, Y.T., Wang, W., Zhang, L.C., & Feng, X.Q. (2010) An enriched radial point interpolation method (e-RPIM) for analysis of crack tip fields. Engineering Fracture Mechanics, 78(2011), pp. 175-190.
1 2
1 2Gu, YuanTong & Liu, Gui-Rong (2005) Meshless methods coupled with other numerical methods. Tsinghua Science and Technology, 10(1), pp. 8-15.
9
9Gu, YuanTong & Zhang, Liangchi (2007) A New Method for Stress and Deformation Analysis from Nano to Macro Dimensional Scales. Key Engineering Materials, 340-34, pp. 955-960.
2 2
2 2Guan, Lisa (2011) The influence of glass types on the performance of air-conditioned office buildings in Australia. Advanced Materials Research, 346, pp. 34-39.
183
183Harada, H, Okada, I, Ro, Y, & Zhou, Hao (2005) Investigations on the Thermo-Mechanical Fatigue of Two Ni-Based Single-Crystal Superalloys. Materials Science and Engineering A, 394(1-2), pp. 161-167.
9 7
9 7Harkin, Damien, George, Karina, Madden, Peter, Schwab, Ivan, Hutmacher, Dietmar, & Chirila, Traian (2011) Silk fibroin in ocular tissue reconstruction. Biomaterials, 32(10), pp. 2445-2458.
12 12
12 12Hoffmann, Bettina, Volkmer, Elias, Kokott, Andreas, Augat, Peter, Ohnmacht, Michael, Sedlmayr, Nicole, et al. (2009) Characterisation of a new bioadhesive system based on polysaccharides with the potential to be used as bone glue. Journal of Materials Science: Materials in Medicine, 20(10), pp. 2001-2009.
7 6
7 6Hoque, Enamul, Hutmacher, Dietmar, Feng, Wei, Li, Suming, Huang, Ming-Hsi, Vert, Michel, et al. (2005) Fabrication using a rapid prototyping system and in vitro characterization of PEG-PCL-PLA scaffolds for tissue engineering. Journal of Biomaterials Science. Polymer Edition, 16(12), pp. 1595-1610.
30 33
30 33Hu, Ning, Karube, Yoshifumi, Arai, Masahiro, Watanabe, Tomonori, Yan, Cheng, Li, Yuan, et al. (2010) Investigation on sensitivity of a polymer/carbon nanotube composite strain sensor. Carbon, 48(3), pp. 680-687.
63 49
63 49Hu, Ning, Masuda, Zen, Yan, Cheng, Yamamoto, Go, Fukunaga, Hisao, & Hashida, Toshiyuki (2008) The electrical properties of polymer nanocomposites with carbon nanotube fillers. Nanotechnology, 19, p. 215701.
597 54 44
597 54 44Hu, Y.Q., Yan, Cheng, Zhang, H.F., Ye, Lin, & Hu, Z.Q. (2004) Preparation and hydrogenation characteristics of Mg–30 wt.% Ti37.5V25Cr37.5 composite. Journal of Alloys and Compounds, 375(1-2), pp. 265-269.
182 16 18
182 16 18Hu, Y.Q., Zhang, H.F., Yan, Cheng, Ye, Lin, Ding, B.Z., & Hu, Z.Q. (2004) Preparation and hydrogenation of body-centered-cubic TiCr2 alloy. Materials Letters, 58(5), pp. 783-786.
197 5 5
197 5 5Hu, Yongsheng, Yang, Dongjang, Xu, Yao, Wu, Dong, & Sun, Yuhan (2009) A novel moisture-resistant film for NiSO4.6H2O filter based on isophorone diisocyanate-bridged polysilsesquioxane. Materials Chemistry and Physics, 114(2-3), pp. 868-873.
2 2
2 2Huang, Ming-Hsi, Li, Suming, Hutmacher, Dietmar, Coudane, Jean, & Vert, Michel (2006) Degradation characteristics of poly(epsilon-caprolactone)-based copolymers and blends. Journal of Applied Polymer Science, 102(2), pp. 1681-1687.
28 28
28 28Ignatius, Anita, Blessing, H., Liedert, Astrid, Schmidt, Carla, Neidlinger-Wilke, Cornelia, Kaspar, Daniela, et al. (2005) Tissue engineering of bone: Effects of mechanical strain on osteoblastic cells in type I collagen matrices. Biomaterials, 26(3), pp. 311-318.
90 95
90 95Ignatius, Anita, Peraus, Manfred, Schorlemmer, Sandra, Augat, Peter, Burger, Wolfgang, Leyen, Stefan, et al. (2005) Osseointegration of alumina with a bioactive coating under load-bearing and unloaded conditions. Biomaterials, 26(15), pp. 2325-2332.
12 13
12 13Ji, Liang, Liu, Meinan, & Xue, Dongfeng (2010) Polymorphology of sodium niobate based on two different bidentate organics. Materials Research Bulletin, 45(3), pp. 314-317.
10 9
10 9Jiang, Wu-Gui, Li, Gang-Long, & Gu, YuanTong (2011) Effect of micro scale on prediction of thermal residual stresses in multilayer ceramic capacitors (MLCCs). Advanced Materials Research : Proceedings of the 2011 International Conference on Advanced Engineering Materials and Technology (AEMT 2011), pp. 2651-2654.
Johnston, A. H., Dalton, P. D., & Newman, T. A. (2010) Polymersomes, smaller than you think : ferrocene as a TEM probe to determine core structure. Journal of Nanoparticle Research, 12(6), pp. 1997-2001.
4 4
4 4Jones, Anthony, Arns, Christoph, Sheppard, P., Hutmacher, Dietmar, Milthorpe, Bruce, & Knackstedt, Mark (2007) Assessment of bone ingrowth into porous biomaterials using MICRO-CT. Biomaterials, 28(15), pp. 2491-2504.
64 67
64 67Karim, M. Azharul & Yarlagadda, Prasad K. (2011) Managing product quality and reliability under new challenges. Advanced Materials Research, 335/6, pp. 1520-1524.
30
30Ke, Xuebin, Zhu, Huai Yong, Gao, Xueping, Liu, Jiang-Wen, & Zheng, Zhanfeng (2007) High-performance ceramic membranes with a separation layer of metal oxide nanofibers. Advanced Materials, 19(6), pp. 785-790.
154 34 36
154 34 36Khan, Javaid, Schue, Francois, & George, Graeme (2010) Polymerization of epsilon-caprolactone on calcium alkoxide-functionalized silica substrates. Polymer International, 59(11), pp. 1506-1513.
2 2
2 2Khor, Hwei Ling, Ng, Kee Woei, Htay, Aung Soe, Schantz, Jan-Thorsten, Teoh, Swee-Hin, & Hutmacher, Dietmar (2003) Preliminary study of a polycaprolactone membrane utilized as epidermal substrate. Journal of Materials Science-Materials in Medicine, 14(2), pp. 113-120.
22 22
22 22Kiani, Khalid, Hill, David, Rasoul, Firas, Whittaker, Michael, & Rintoul, Llewellyn (2007) Raft Mediated Surface Grafting of t-Butyl Acrylate onto an Ethylene-Propylene Copolymer Initiated by Gamma Radiation. Journal of Polymer Science. Part A, Polymer Chemistry, 45(6), pp. 1074-1083.
14
14Knothe Tate, Melissa, Steck, Roland, & Anderson, Eric (2009) Bone as an inspiration for a novel class of mechanoactive materials. Biomaterials, 30(2), pp. 133-140.
9 11
9 11Lai, Frank, Bell, John, & Motta, Nunzio (2008) Bovine serum albumin adhesion force measurements using an atomic force microscopy. Advanced Materials Research, 32, pp. 49-52.
Lam, Christopher, Teoh, Swee-Hin, & Hutmacher, Dietmar (2007) Comparison of the degradation of polycaprolactone and polycaprolactone-(B-tricalcium phosphate) scaffolds in alkaline medium. Polymer International, 56(6), pp. 718-728.
29 30
29 30Lan, Ying, Gao, Xue, Zhu, Huai, Zheng, Z, Yan, Tianying, Wu, Feng, et al. (2005) Titanate nanotubes and nanorods prepared from rutile powder. Advanced Functional Materials, 15(8), pp. 1310-1318.
184 166
184 166Law, Susan H., van Eijkelenborg, Martijn A., Barton, Geoffrey W., Yan, Cheng, Lwin, Richard, & Gan, J. (2006) Cleaved end-face quality of microstructured polymer optical fibres. Optics Communications, 265(2), pp. 513-520.
268 8 10
268 8 10Lee, Chi Seung, Kim, Myung Hyun, Lee, Jae Myung, & Mahendran, Mahen (2011) Computational study on the fatigue behavior of welded structures. International Journal of Damage Mechanics, 20(3), pp. 423-463.
4 3
4 3Leong, David, Gupta, Anurag, Bai, Hui-Fen, Wan, Guoqiang, Yoong, Li Foong, Too, Heng-Phon, et al. (2007) Absolute quantification of gene expression in biomaterials research using real-time PCR. Biomaterials, 28(2), pp. 203-210.
31 33
31 33Li, Yuan, Liu, Yaolu, Peng, Xianghe, Yan, Cheng, Liu, Sen, & Hu, Ning (2011) Pull-out simulations on interfacial properties of carbon nanotube-reinforced polymer nanocomposites. Computational Materials Science, 50(6), pp. 1854-1860.
9 8
9 8Liu, Hongwei, Zheng, Zhanfeng, Yang, Dongjang, Ke, Xuebin, Jaatinen, Esa, Zhao, Jincai, et al. (2010) Coherent interfaces between crystals in nanocrystal composites. ACS Nano, 4(10), pp. 6219-6227.
5 3
5 3Liu, Meinan, Xue, Dongfeng, & Li, Keyan (2008) Soft-chemistry synthesis of LiNbO3 crystallites. Journal of Alloys and Compounds, 449(1-2), pp. 28-31.
20 20
20 20Liu, Meinan, Xue, Dongfeng, & Luo, Chao (2006) Wet chemical synthesis of pure LiNbO3 powders from simple niobium oxide Nb2O5. Journal of Alloys and Compounds, 426(1-2), pp. 118-122.
13 10
13 10Liu, Meinan, Xue, Dongfeng, Zhang, Shouchen, Zhu, Haiyang, Wang, Jiyang, & Kitamura, Kenji (2005) Chemical synthesis of stoichiometric lithium niobate powders. Materials Letters, 59(8-9), pp. 1095-1097.
28 28
28 28Liu, Rui, Frost, Ray, & Martens, Wayde (2009) Near infrared and mid infrared investigations of adsorbed phenol on HDTMAB organoclays. Materials Chemistry and Physics, 113(2-3), pp. 707-713.
12 10
12 10Madden, Peter, Lai, Jonathan, George, Karina, Giovenco, Talia, Harkin, Damien, & Chirila, Traian (2011) Human corneal endothelial cell growth on a silk fibroin membrane. Biomaterials, 32(17), pp. 4076-4084.
15 11
15 11Malda, Jos, Woodfield, T, van der Vloodt, F, Wilson, C, Martens, D, Tramper, J, et al. (2005) The effect of PEGT/PBT scaffold architecture on the composition of tissue engineered cartilage. Biomaterials, 26(1), pp. 63-72.
99 93
99 93Martina, Monique & Hutmacher, Dietmar (2007) Biodegradable polymers applied in tissue engineering research: a review. Polymer International, 56(2), pp. 145-157.
118 109
118 109Martina, Monique, Subramanyam, Gayathri, Weaver, James, Hutmacher, Dietmar, Morse, Daniel, & Valiyaveettil, Suresh (2005) Developing macroporous bicontinuous materials as scaffolds for tissue engineering. Biomaterials, 26(28), pp. 5609-5616.
33 31
33 31Moghaddam, Lalehvash, Blinco, James, Colwell, John, Halley, Peter, Bottle, Steven, Fredericks, Peter, et al. (2011) Investigation of polypropylene degradation during melt processing using a profluorescent nitroxide probe: A laboratory-scale study. Polymer Degradation and Stability, 96(4), pp. 455-461.
1 2
1 2Morgan, Dana, Triani, Gerry, Blackford, Mark, Raftery, Tony, Frost, Ray, & Waclawik, Eric (2010) Alkaline hydrothermal kinetics in titanate nanostructure formation. Journal of Materials Science, 46(2), pp. 548-557.
4 5
4 5Morgan, Dana, Waclawik, Eric, & Frost, Raymond (2007) Synthesis And Characterisation of Titania Nanotubes: Effect of Phase And Crystallite Size on Nanotube Formation. Advanced Materials Research, 29-30, pp. 211-214.
1
1Musumeci, Anthony, Silva, Glaura, Liu, Jiangwen, Rintoul, Llewellyn, Waclawik, Eric, & George, Graeme (2007) MWNT Polymer Nanocomposites Based on P3HT. Advanced Materials Research, 29-30, pp. 291-294.
1 1
1 1Newton, Barry, Chiffoleau, Gwenael J.A., Steinberg, Theodore, & Binder, Christian (2009) Adiabatic compression testing - part II : background and approach to estimating severity of test methodology. Journal of ASTM International, 6(8), pp. 1-18.
166 1
166 1Newton, Barry & Steinberg, Theodore (2009) Adiabatic compression testing - part I : historical development and evaluation of fluid dynamic processes including shock-wave considerations. Journal of ASTM International, 6(8), pp. 1-18.
369
369Ng, Kee Woei & Hutmacher, Dietmar (2006) Reduced contraction of skin equivalent engineered using cell sheets cultured in 3D matrices. Biomaterials, 27(26), pp. 4591-4598.
34 30
34 30Ng, Kee Woei, Louis, Jevon, Tuan, Barnabas Ho Saey, Achuth, Hosur, Lu, Jia, Moochhala, Shabbir, et al. (2005) Characterization of a novel bioactive poly[(lactic acid)-co-(glycolic acid)] and collagen hybrid matrix for dermal regeneration. Polymer International, 54(10), pp. 1449-1457.
3 3
3 3Okutani, Takeshi, Nagai, Hideaki, Mamiya, Mikito, Shibuya, Masachika, & Castillo, Martin (2006) Effect of microgravity and magnetic field on the metallic and crystalline structure of magnetostrictive SmFe2 synthesized by unidirectional solidification. Annals of the New York Academy of Sciences, 1077, pp. 146-160.
1 1
1 1Palmer, Sara & Frost, Ray (2009) Characterisation of bauxite and seawater neutralised bauxite residue using XRD and vibrational spectroscopic techniques. Journal of Material Science, 44(1), pp. 55-63.
12 12
12 12Park, Yoosup, Doherty, William O.S., & Halley, Peter J. (2008) Developing Lignin-Based Resin Coatings and Composites. Industrial Crops and Products, 27(2), pp. 163-167.
27 21
27 21Paterson, Stefan, Brown, David, Chirila, Traian, Keen, Imelda, Whittaker, Andrew, & Baker, Murray (2010) The synthesis of water-soluble PHEMA via ARGET ATRP in protic media. Journal of Polymer Science, Part A: Polymer Chemistry, 48(18), pp. 4084-4092.
12 11
12 11Paterson, Stefan, Clark, Jasper, Stubbs, Keith, Chirila, Traian, & Baker, Murray (2011) Carbohydrate-based crosslinking agents: Potential use in hydrogels. Journal of Polymer Science, Part A: Polymer Chemistry, 49(20), pp. 4312-4315.
1 1
1 1Paul, Blain, Martens, Wayde, & Frost, Ray (2011) Organosilane grafted acid-activated beidellite clay for the removal of non-ionic alachlor and anionic imazaquin. Applied Surface Science, 257(13), pp. 5552-5558.
1 1
1 1Pawlak, Z, Kaldonski, T, Pai, Raghuvir, Bayraktare, E, & Oloyede, A. (2009) A comparative study on the tribological behaviour of hexagonal boron nitride (h-BN) as lubricating micro-particles - An additive in porous sliding bearings for a car clutch. Wear, 267(5-8), pp. 1198-1202.
17 14
17 14Pawlak, Zenon, Urbaniak, Wieslaw, & Oloyede, Adekunle (2011) The relationship between friction and wettability in aqueous environment. Wear [Proceedings of the 18th International Conference on Wear of Materials], 271(9 - 10), pp. 1745-1749.
5 2
5 2Pawlak, Zenon, Yarlagadda, Prasad K., Hargreaves, Douglas J., Kosse, Vladis, Frost, Ray L., Rauckyte, Teresa, et al. (2007) Mechanism of hardening for the surface phosphates under external high pressure. International Journal of Surface Science and Engineering. (In Press)
127
127Pienaar, Christine, Chiffoleau, Gwenael, Follens, Lana, Martens, Johan, Kirschhock, Christine, & Steinberg, Theodore (2007) Effect of Gravity on the Gelation of Silica Sols. Chemistry of Materials, 19(4), pp. 660-664.
4 4
4 4Porter, Blaise, Lin, Angela, Peister, Alexandra, Hutmacher, Dietmar, & Guldberg, Robert (2007) Noninvasive image analysis of 3D construct mineralization in a perfusion bioreactor. Biomaterials, 28(15), pp. 2525-2533.
38 35
38 35Rainey, Thomas J. & Clark, Noel (2004) An Overview of Bagasse as a Resource for the Australian Paper Industry. International Sugar Journal, 106(1271), pp. 608-611.
1 1
1 1Ramaswamy, Yogambha, Wu, Chengtie, Van Hummel, Annika, Combes, Valery, Grau, Georges, & Zreiqat, Hala (2008) The responses of osteoblasts, osteoclasts and endothelial cells to zirconium modified calcium-silicate-based ceramic. Biomaterials, 29(33), pp. 4392-4402.
24 25
24 25Sadik, Amin & O'Shea, Peter (2009) Realisation of ternary sigma-delta modulated arithmetic processing modules. EURASIP Journal on Advances in Signal Processing, 2009(574627), pp. 1-7.
Sarkar, Michael, Augat, Peter, Shefelbine, Sandra, Schorlemmer, Sandra, Huber-Lang, Markus, Claes, Lutz, et al. (2006) Bone formation in a long bone defect model using a platelet-rich plasma-loaded collagen scaffold. Biomaterials, 27(9), pp. 1817-1823.
67 62
67 62Schantz, Jan-Thorsten, Brandwood, Arthur, Hutmacher, Dietmar, Khor, Hwei Ling, & Bittner, Katharina (2005) Osteogenic differentiation of mesenchymal progenitor cells in computer designed fibrin-polymer-ceramic scaffolds manufactured by fused deposition modeling. Journal of Materials Science-Materials in Medicine, 16(9), pp. 807-819.
34 41
34 41Seftel, Elena, Popovici, E., Beyers, E., Mertens, M., Zhu, Huai, Vansant, Etienne, et al. (2010) New TiO2/MgAl-LDH nanocomposites for the photocatalytic degradation of dyes. Journal of Nanoscience and Nanotechnology, 10(12), pp. 8227-8233.
9 5
9 5Shao, Xinxin, Hutmacher, Dietmar, Tuan, Barnabas Ho Saey, Goh, James, & Lee, Eng Hin (2006) Evaluation of a hybrid scaffold/cell construct in repair of high-load-bearing osteochondral defects in rabbits. Biomaterials, 27(7), pp. 1071-1080.
78 81
78 81Shen, Jun, Wang, G., Sun, J.F., Stachurski, Zbigniew H., Yan, Cheng, Ye, Lin, et al. (2005) Superplastic Deformation Behavior of Zr41.25Ti13.75Ni10Cu12.5Be22.5 Bulk Metallic Glass in Supercooled Liquid Region. Intermetallics, 13(1), pp. 79-85.
173 21 20
173 21 20Sparks, Kyle, Stoltzfus, Joel, Steinberg, Theodore, & Lynn, David Benjamin (2009) Determination of burn criterion for promoted combustion testing. Journal of ASTM International, 6(10).
141 2
141 2Sun, Hongli, Wu, Chengtie, Dai, Kerong, Chang, Jiang, & Tang, Tingting (2006) Proliferation and osteoblastic differentiation of human bone marrow-derived stromal cells on akermanite-bioactive ceramics. Biomaterials, 27(33), pp. 5651-5657.
96 96
96 96Suvorovs, Terese, Ward, Nicholas, Steinberg, Theodore, & Wilson, Richard (2007) Effect of geometry on the melting rates of iron rods burning in high pressure oxygen. Journal of ASTM International, 4(4).
5
5Suvorovs, Terese, Ward, Nicholas, Steinberg, Theodore, & Wilson, Richard (2007) Statistical Evaluation of Promoted Ignition Test Data. Journal of ASTM International, 4(7), pp. 1-13.
4
4Tao, Qi, He, Hongping, Frost, Ray, Yuan, Peng, & Zhu, Jianxi (2009) Nanomaterials based upon silylated layered double hydroxides. Applied Surface Science, 255(7), pp. 4334-4340.
19 17
19 17Tesfamichael, Tuquabo, Will, Geoffrey D., & Bell, John M. (2005) Nitrogen ion implanted nanostructured titania films used in dye-sensitised solar cells and photocatalyst. Applied Surface Science, 245(1-4), pp. 172-178.
12 13
12 13Toh, Yi-Chin, Tuan, Barnabas Ho Saey, Zhou, Yi, Hutmacher, Dietmar, & Yu, Hanry (2005) Application of a polyelectrolyte complex coacervation method to improve seeding efficiency of bone marrow stromal cells in a 3D culture system. Biomaterials, 26(19), pp. 4149-4160.
31 28
31 28Tuan, Barnabas Ho Saey & Hutmacher, Dietmar (2006) A comparison of micro CT with other techniques used in the characterization of scaffolds. Biomaterials, 27(8), pp. 1362-1376.
121 122
121 122Vlacic-Zischke, J, Hamlet, Stephen, Friis, Thor, Tonetti, M S, & Ivanovski, Saso (2010) The influence of surface microroughness and hydrophilicity of titanium on the up-regulation of TGFβ/BMP signalling in osteoblasts. Biomaterials, 32(3), pp. 665-671.
27 24
27 24Wang, David, Fredericks, Peter, Haddad, Athir, Hill, David, Rasoul, Firas, & Whittaker, Andrew (2011) Hydrolytic degradation of POSS-PEG-lactide hybrid hydrogels. Polymer Degradation and Stability, 96(1), pp. 123-130.
2 2
2 2Ward, Nicholas & Steinberg, Theodore (2009) A proposed qualitative framework for heterogeneous burning of metallic materials : the 'melting rate triangle'. Journal of ASTM International, 6(6).
65
65Ward, Nicholas & Steinberg, Theodore (2009) The rate-limiting mechanism for the heterogeneous burning of cylindrical iron rods. Journal of A S T M International, 6(6).
42
42Won, Tae-Jin, Clegg, Jack, Lindoy, Leonard, & McMurtrie, John (2007) Cobalt(II), Copper(II), and Zinc(II) Framework Systems Derived from Ditopic Pyridyl-Acetylacetone and Pyridyl-Pyrazole Ligands. Crystal Growth and Design, 7(5), pp. 972-979.
25 25
25 25Wu, Chengtie & Chang, Jiang (2007) Bonelike apatite formation on carbon microspheres. Materials Letters, 61(11-12), pp. 2502-2505.
7 6
7 6Wu, Chengtie, Chang, Jiang, Wang, Junying, Ni, Siyu, & Zhai, Wanyin (2005) Preparation and characteristics of a calcium magnesium silicate (bredigite) bioactive ceramic. Biomaterials, 26(16), pp. 2925-2931.
50 47
50 47Wu, Chengtie, Chang, Jiang, & Zhai, Wanyin (2005) A novel hardystonite bioceramic: preparation and characteristics. Ceramics International, 31(1), pp. 27-31.
18 17
18 17Wu, Chengtie, Chang, Jiang, Zhai, Wanyin, & Ni, Siyu (2007) A novel bioactive porous bredigite (Ca7MgSi4O16) scaffold with biomimetic apatite layer for bone tissue engineering. Journal of Materials Science-Materials in Medicine, 18(5), pp. 857-864.
31 31
31 31Wu, Chengtie, Ramaswamy, Yogambha, Kwik, Danielle, & Zreiqat, Hala (2007) The effect of strontium incorporation into CaSiO3 ceramics on their physical and biological properties. Biomaterials, 28(21), pp. 3171-3181.
68 61
68 61Wu, Chengtie, Ramaswamy, Yogambha, Zhu, Yufang, Zheng, Rongkun, Appleyard, Richard, Howard, Andrew, et al. (2009) The effect of mesoporous bioactive glass on the physiochemical, biological and drug-release properties of poly(dl-lactide-co-glycolide) films. Biomaterials, 30(12), pp. 2199-2208.
41 40
41 40Wu, Chengtie & Zreiqat, Hala (2007) Preparation and characteristics of strontium containing bioactive CaSiO3 ceramics. Key Engineering Materials, 330-33(2007), pp. 499-502.
2
2Wu , Chengtie, Luo, Yongxiang, Cuniberti, Gianaurelio, Xiao, Yin, & Gelinsky, Michael (2011) Three-dimensional printing of hierarchical and tough mesoporous bioactive glass scaffolds with a controllable pore architecture, excellent mechanical strength and mineralization ability. Acta Biomaterialia, 7(6), pp. 2644-2650.
183 17 18
183 17 18Xu, Xu, Gu, YuanTong, & Liu, Gui-Rong (2013) A hybrid smoothed finite element method (H-SFEM) to solid mechanics problems. International Journal of Computational Methods, 10(134001), pp. 1-17.
13
13Yamashita, Toru, Barry, John, & Taylor, Richard (2010) Doping and atomic site substitution in the dielectric ceramics Ti(Al)O2 rutile and (1-x)Ca2/5Sm2/5TiO3-xLi1/2Sm1/2TiO3 perovskite. Journal of the American Ceramic Society, 93(1), pp. 251-255.
2 2
2 2Yamashita, Toru, Ilyushechkin, Alexander, & Mackinnon, Ian (2005) Formation of Bi2(Sr1-xCax)2(Ca1-yYy)Cu2O(Delta) and its superconducting transition. Journal of the Ceramic Society of Japan, 113(1317), pp. 349-352.
Yan, Cheng, Mai, Yiu-Wing, & Ye, Lin (2001) Effect of bond thickness on fracture behaviour in adhesive joints. Journal of Adhesion, 75(1), pp. 27-44.
411 15
411 15Yan, Cheng, Xiao, Keqin, Ye, Lin, & Mai, Yiu-Wing (2002) Numerical and experimental studies on the fracture behavior of rubber-toughened epoxy in bulk specimen and laminated composites. Journal of Materials Science, 37(5), pp. 921-927.
618 14 10
618 14 10Yan, Cheng, Ye, Lin, & Mai, Yiu-Wing (2004) Effect of constraint on tensile behavior of an AZ91 magnesium alloy. Materials Letters, 58(25), pp. 3219-3221.
467 11 10
467 11 10Yan, Chenglin, Zou, Longjiang, Xue, Dongfeng, Xu, Jiasheng, & Liu, Meinan (2008) Chemical tuning polymorphology of functional materials by hydrothermal and solvothermal reactions. Journal of Materials Science, 43(7), pp. 2263-2269.
15 17
15 17Yang, Jeanne, Zhao, Yanyan, & Frost, Ray (2009) Surface analysis, TEM, dynamic and controlled rate thermal analysis, and infrared emission spectroscopy of gallium doped boehmite nanofibres and nanosheets. Applied Surface Science, 255(18), pp. 7925-7936.
6 5
6 5Yang, Jing, Baker, Adrian, Liu, Hongwei, Martens, Wayde, & Frost, Ray (2010) Size-controllable synthesis of chromium oxyhydroxide nanomaterials using a soft chemical hydrothermal route. Journal of Materials Science, 45(24), pp. 6574-6585.
2 2
2 2Yu, Zhong-Zhen, Yan, Cheng, Dasari, Aravind, Dai, Shaocong, Mai, Yiu-Wing, & Yang, Mingshu (2004) On toughness and stiffness of poly(butylene terephthalate) with epoxide-containing elastomer by reactive extrusion. Macromolecular Materials and Engineering, 289(8), pp. 763-770.
431 11 10
431 11 10Yu, Zhong-Zhen, Yan, Cheng, Yang, Mingshu, & Mai, Yiu-Wing (2004) Mechanical and dynamic mechanical properties of nylon 66/montmorillonite nanocomposites fabricated by melt compounding. Polymer International, 53(8), pp. 1093-1098.
1,168 54 50
1,168 54 50Yuan, Hong, Ma, Wanhong, Chen, Chuncheng, Zhao, Jincai, Liu, Jiangwen, Zhu, Huai, et al. (2007) Shape and SPR Evolution of Thorny Gold Nanoparticles Promoted by Silver Ions. Chemistry of Materials, 19(7), pp. 1592-1600.
56 57
56 57Zhan, Haifei & Gu, YuanTong (2012) Theoretical and numerical investigation of bending properties of Cu nanowires. Computational Materials Science, 55, pp. 73-80.
52 3 3
52 3 3Zhan, Haifei, Gu, YuanTong, & Park, Harold S. (2012) Beat phenomena in metal nanowires, and their implications for resonance-based elastic property measurements. Nanoscale, 4(21), pp. 6779-6785.
40 1 1
40 1 1Zhan, Haifei, Gu, YuanTong, Yan, Cheng, & Yarlagadda, Prasad K.D.V. (2011) Numerical exploration of the defect’s effect on mechanical properties of nanowires under torsion. Advanced Materials Research, 335, pp. 498-501.
65 2 3
65 2 3Zhan, Haifei, Gu, YuanTong, & Yarlagadda, Prasad K. (2011) Advanced numerical characterization of mono-crystalline copper with defects. Advanced Science Letters, 4(4-5), pp. 1293-1301.
5 4
5 4Zhang, Xing-Hong, Han, Jie-Cai, He, Xiao-Dong, Yan, Cheng, Wang, Bao-Lin, & Xu, Qiang (2005) Ablation-Resistance of Combustion Synthesized TiB2–Cu Cermet. Journal of the American Ceramic Society, 88(1), pp. 89-94.
459 7 9
459 7 9Zhao, Yanyan, Yang, Jeanne, Frost, Ray, Kristof, Janos, & Horvath, Erzsebet (2009) Synthesis, characterization and thermal analysis of Fe-doped boehmite nanofibres and nanosheets. Journal of Materials Science, 44(14), pp. 3662-3673.
3 3
3 3Zhou, Yefang, Hutmacher, Dietmar, Varawan, Sae-Lim, & Lim, Tit (2007) In vitro bone engineering based on polycaprolactone and polycaprolactone-tricalcium phosphate composites. Polymer International, 56(3), pp. 333-342.
27 24
27 24Zreiqat, Hala, Ramaswamy, Yogambha, Wu, Chengtie, Paschalidis, Angelo, James, Barbara, Birke, Oliver, et al. (2010) The incorporation of strontium and zinc into a calcium-silicon ceramic for bone tissue engineering. Biomaterials, 31(12), pp. 3175-3184.
34 31
34 31Conference Paper
Bell, John, Phillipp, F, Schroder, H, & Zhou, Hao (2005) Improvement of Nano-structured GaN Films Grown on Sapphire by Laser-Induced Reactive Epitaxy. In Wilson, A (Ed.) Smart Materials III: Proceedings of SPIE Vol. 5648, 12 December - 14 December 2004, Australia, New South Wales, Sydney.
Diao, Hui, Yan, Cheng, Bell, John, Lu, Li, & Zhang, Guangping (2010) Indentation size effect and strain rate sensitivity of nanocrystalline Mg-Al alloys. In 5th World Congress on Engineering Asset Management (WCEAM-AGIC 2010), 25-27 October 2010, Brisbane Convention & Exhibition Centre, Brisbane. (In Press)
116
116Poologanathan, Keerthan & Mahendran, Mahen (2009) Post-buckling Strength of LiteSteel Beams in Shear. In The 6th International Conference on Advances in Steel Structures, 16-18 December 2009, Hong Kong.
118
118Zhan, Haifei, Gu, YuanTong, Yarlagadda, Prasad K., & Yan, Cheng (2012) Influence of pre-exsiting surface defects on the vibrational properties of Ag nanowires. In 12th International Conference on Nanotechnology (IEEE NANO 2012), 20-23 August 2012, International Convention Centre, Birmingham.
37
37Zhou, Hao, Martens, Wayde N., Tesfamichael, Tuquabo, Will, Geoffrey D., Hu, Aming, & Bell, John M. (2005) Microstructures and photocatalytic properties of Nitrogen-Implanted titania Nanostructured Films. In Chiao, Jung-Chih, Dzurak, Andrew S., Jagadish, Chennupati, & Thiel, David V. (Eds.) Device and Process Technologies for Microelectronics, MEMS, and Photonics IV: Proceedings of SPIE, 12-14 December, 2005, Brisbane, Australia.
Conference Item
Sparks, Kyle M., Stoltzfus, Joel, Steinberg, Theodore, & Lynn, David Benjamin (2010) Heat effects of promoters and determination of burn criterion in promoted combustion testing. In The 4th International Association for the Advancement of Space Safety Conference: Making Safety Matter, 19-21 May 2010, Huntsville, AL.