Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > MATERIALS ENGINEERING (091200) > Composite and Hybrid Materials (091202)"
|Up a level|
- Subjects classification (41554)
- Australian and New Zealand Standard Research Classification (41554)
Group by: Authors/Creators | Item Type
Number of items at this level: 52.
Alamusi, , Hu, Ning, Jia, Bi, Arai, Masahiro, Yan, Cheng, Li, Jinhua, et al. (2012) Prediction of thermal expansion properties of carbon nanotubes using molecular dynamics simulations. Computational Materials Science, 54, pp. 249-254.
Alamusi, Affa, Hu, Ning, Qiu, Jianhui, Li, Yuan, Chang, Christiana, Atobe, Satoshi, et al. (2013) Multi-scale numerical simulations of thermal expansion properties of CNT-reinforced nanocomposites. Nanoscale Research Letters, 8(15).
Awad, Z.K., Aravinthan, Thiru, Zhuge, Y., & Gonzalez, Luis F. (2012) Multi-objective design optimisation of GFRP sandwich beams. In Samali, Bijan, Attard, Mario M., & Song, Chongmin (Eds.) From Materials to Structures: Advancement through Innovation : Proceedings of the 22nd Australasian Conference on the Mechanics of Structures and Materials, CRC Press, Sydney, Australia.
Awad, Ziad K., Aravinthan, Thiru, Zhuge, Yan, & Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33, pp. 534-544.
Battersby, Browyn, Corrie, Simon, Fredericks, Peter, Jack, Kevin, Keen, Imelda, Kozak, Darby, et al. (2008) A structural study of hybrid organosilica materials for colloid-based DNA biosensors. Journal of Materials Chemistry, 18(5), pp. 523-529.
Bell, John, Goh, Roland, Motta, Nunzio, & Waclawik, Eric (2005) Nano-Assembly of Conjugated Polymer on Carbon Nanotubes: An STM Study. In Colla, M (Ed.) Proceedings of 16th National Congress of the Australian Institute of Physics, 30 January - 4 February 2005, Australia, Australian Capital Territory, Canberra.
Bock, Nathalie, Woodruff, Maria A., Steck, Roland, Hutmacher, Dietmar, Farrugia, Brooke L., & Dargaville, Tim R. (2014) Composites for delivery of therapeutics : combining melt electrospun scaffolds with loaded electrosprayed microparticles. Macromolecular Bioscience, 14(2), pp. 202-214.
Galpaya, Dilini, Wang, Mingchao, George, Graeme, Motta, Nunzio, Waclawik, Eric R., & Yan, Cheng (2014) Preparation of graphene oxide/epoxy nanocomposites with significantly improved mechanical properties. Journal of Applied Physics, 116(5), 053518-1.
Galpaya, Dilini, Wang, Mingchao, Liu, Meinan, Motta, Nunzio, Waclawik, Eric R., & Yan, Cheng (2012) Recent advances in fabrication and characterization of graphene-polymer nanocomposites. Graphene, 1(2), pp. 30-49.
Galpaya, Dilini, Wang, Mingchao, Yan, Cheng, Liu, Meinan, Motta, Nunzio, & Waclawik, Eric R. (2013) Fabrication and characterisation of graphene oxide-epoxy nanocomposite. In Fourth International Conference on Smart Materials and Nanotechnology in Engineering [Proceedings of SPIE, 8793], SPIE - Society of Photo-Optical Instrumentation Engineers , Gold Coast, Qld, pp. 1-7.
Galpaya, Dilini, Wang, Mingchao, Yan, Cheng, Liu, Meinan, Motta, Nunzio, & Waclawik, Eric R. (2013) Fabrication and mechanical and thermal behaviour of graphene oxide/epoxy nanocomposites. Journal of Multifunctional Composites, 1(2), pp. 91-98.
Griffiths, James & Gudimetla, Prasad (2008) Puncture resistance of pressurized & unpressurized glass reinforced epoxy (GRE) pipes - a phenomenological model of failure mechanisms. In Yarlagadda, P & Gudimetla, P (Eds.) Proceedings of the 9th Global Congress on Manufacturing & Management (GCMM2008), 12 - 14 November 2008, Australia, Queensland, Surfers Paradise.
Griffiths, James & Gudimetla, Prasad V. (2008) Puncture resistance of pressurized and unpressurized glass reinforced Epoxy (GRE) pipes : a phenomenological model of failure mechanisms. AIJST -Asian International Journal of Science and Technology : Production and Manufacturing, 1(2), pp. 41-50.
Guo, Hongbo, Khor, Khiam A., Boey, Yin Chiang, & Miao, Xigeng (2003) Laminated and functionally graded hydroxyapatite/yttria stabilized tetragonal zirconia composites fabricated by spark plasma sintering. Biomaterials, 24(4), pp. 667-675.
Guo, Hongbo, Miao, Xigeng, Chen, Yanming, Cheang, P., & Khor, Khiam A. (2004) Characterization of hydroxyapatite- and bioglass-316L fibre composites prepared by spark plasma sintering. Materials Letters, 58(3-4), pp. 304-307.
Heidarkhan Tehrani, A., Singh, S., Jaiprakash, A., & Oloyede, A. (2014) Correlating flow induced shear stress and chondrocytes activity in micro-porous scaffold using computational fluid dynamics and rapid prototyping. In ASBTE 23rd Annual Conference of the Australian Society for Biomaterials and Tissue Engineering, 22-24 April 2014, Mantra Resort Lorne, Victoria, Australia.. (In Press)
Heidarkhan Tehrani, Ashkan, Haghi, A. K., & , (2009) Technological Advances in Geotextiles. In Pethrick, Richard A., Zaikov, G. E., & Pielichowski, J. (Eds.) Monomers, Oligomers, Polymers, Composites and Nanocomposites Research : Synthesis, Properties and Applications. Nova Science Publishers, Inc. USA, New York City, USA, pp. 219-229.
Heidarkhan Tehrani, Ashkan & Saeed, Karbasi (2010) Preparing nanocomposite fibrous scaffolds of P3HB/nHA for bone tissue engineering. In Proceedings of the 17th Iranian Conference of Biomedical Engineering, IEEE, Isfahan University of Medical Isfahan, Iran, pp. 403-406.
Hou, , Yang, Xiaoping, Zhang, Liqun, Waclawik, Eric, & Wu, Sizhu (2010) Stretching-induced crystallinity and orientation to improve the mechanical properties of electrospun PAN nanocomposites. Materials & Design, 31(4), pp. 1726-1730.
Hu, Bin, Hu, Ning, Cai, Yindi, Yuan, Weifeng, Yan, Cheng, Cai, Yong, et al. (2013) Performance characterization of VGCF/epoxy nanocomposite sensors under static load cycles and in static structural health monitoring. Smart Materials and Structures, 22(4), 045008.
Hu, Ning, Itoi, Takaomi, Akagi, Taro, Kojima, Takashi, Xue, Junmin, Yan, Cheng, et al. (2013) Ultrasensitive strain sensors made from metal-coated carbon nanofiller/epoxy composites. Carbon, 51, pp. 202-212.
Hu, Ning, Karube, Yoshifumi, Arai, Masahiro, Watanabe, Tomonori, Yan, Cheng, Li, Yuan, et al. (2010) Investigation on sensitivity of a polymer/carbon nanotube composite strain sensor. Carbon, 48(3), pp. 680-687.
Hu, Ning, Masuda, Zen, Yan, Cheng, Yamamoto, Go, Fukunaga, Hisao, & Hashida, Toshiyuki (2008) The electrical properties of polymer nanocomposites with carbon nanotube fillers. Nanotechnology, 19, p. 215701.
Hu, Ning, Shimomukai, Takahito, Yan, Cheng, & Fukunaga, Hisao (2008) Identification of delamination position in cross-ply laminated composite beams using S0 Lamb mode. Composites Science and Technology, 68(6), pp. 1548-1554.
Hu, Ning , Li, Jinhua, Cai, Yindi, Yan, Cheng, Zhang, Yajun, & Qiu, Jinghao (2012) Locating delamination in composite laminated beams using the A0 Lamb mode. Mechanics of Advanced Materials and Structures, 19(6), pp. 431-440.
Illuri, Hema & Nata-Atmadja, Andreas (2005) Engineering Characteristics of a soil-EPS Composite. In Deeks, A & Hao, H (Eds.) Proceedings of the 18th Australasian Conference on the Mechanics of Structures and Materials, 1-3 December 2004, Australia, Western Australia, Perth.
Lai, Zheng Bo, Oloyede, Adekunle, & Yan, Cheng (2012) Cohesive zone modelling of mineralized collagen fibril arrays in bending. In Gu, YuanTong & Saha, Suvash C. (Eds.) Proceedings of the 4th International Conference on Computational Methods, Queensland University of Technology, Crowne Plaza, Gold Coast, QLD.
Liu, Yaolu, Hu, Ning, Xu, Hong, Yuan, Weifeng, Yan, Cheng, Li, Yuan, et al. (2014) Damage evaluation based on a wave energy flow map using multiple PZT sensors. Sensors, 14(2), pp. 1902-1917.
Ma, Hang, Qin, Qing-Hua, & Yan, Cheng (2009) Eigenstrain formulation of boundary integral equations for modeling particle-reinforced composites. Engineering Analysis with Boundary Elements, 33(3), pp. 410-419.
Miao, Xigeng (2003) Observation of microcracks formed in HA-316L composites. Materials Letters, 57(12), pp. 1848-1853.
Miao, Xigeng, Chen, Yanming, Guo, Hongbo, & Khor, Khiam A. (2004) Spark Plasma Sintered Hydroxyapatite-Yttria Stablized Zirconia Composites. Ceramics International, 30(7), pp. 1793-1796.
Miao, Xigeng, Hu, Yifei, Liu, Jianli, & Wong, A. P. (2004) Porous calcium phosphate ceramics prepared by coating polyurethane foams with calcium phosphate cements. Materials Letters, 58(3-4), pp. 397-402.
Miao, Xigeng, Lim, W-K., Huang, Xiao, & Chen, Y. (2005) Preparation and characterization of interpenetrating phased TCP/HA/PLGA composites. Materials Letters, 59(29-30), pp. 4000-4005.
Mona, Mehraban, Ali , Zadhoush, Seyed Abdolkarim , Hosseini Ravandi, Rouhollah , Bagheri, & Heidarkhan Tehrani, Ashkan (2013) Preparation of porous nanofibers from electrospun polyacrylonitrile/calcium carbonate composite nanofibers using porogen leaching technique. Journal of Applied Polymer Science, 128(2), pp. 926-933.
Ning, Huiming, Li, Yuan, Hu, Ning, Cao, Yanping, Yan, Cheng, Azuma, Takesi, et al. (2014) Improvement of the mode II interface fracture toughness of glass fiber reinforced plastics/aluminum laminates through vapor grown carbon fiber interleaves. Science and technology of advanced materials, 15(3), 035004.
Njuguna, Michael K., Galpaya, Dilini, Yan, Cheng, Colwell, John M., Will, Geoffrey, Hu, Ning, et al. (2014) Investigation on temperature-dependent electrical conductivity of carbon nanotube/epoxy composites for sustainable energy applications. Journal of Nanoscience and Nanotechnology. (In Press)
Ren, Mingfa, Li, Tong, Huang, Qizhong, & Wang, Bo (2014) Numerical investigation into the buckling behavior of advanced grid stiffened composite cylindrical shell. Journal of Reinforced Plastics and Composites. (In Press)
Wang, Liang, Bai, Ruixiang, & Yan, Cheng (2010) Interfacial debonding behavior of composite beam/plates with PZT patch. Composite Structures, 92 (6 ), pp. 1410-1415.
Wang, Mingchao, Galpaya, Dilini, Lai, Zheng Bo, Xu, Yanan, & Yan, Cheng (2014) Surface functionalization on the thermal conductivity of graphene–polymer nanocomposites. International Journal of Smart and Nano Materials, 5(2), pp. 123-132.
Wang, Mingchao, Galpaya, Dilini, Lai, Zheng Bo, Xu, Yanan, & Yan, Cheng (2013) Thermal transport in graphene-polymer nanocomposites. In Fourth International Conference on Smart Materials and Nanotechnology in Engineering [Proceedings of SPIE, 8793], SPIE - Society of Photo-Optical Instrumentation Engineers , Gold Coast, Qld, pp. 1-6.
Wang, Mingchao, Hu, Ning, Zhou, Limin, & Yan, Cheng (2015) Enhanced interfacial thermal transport across graphene-polymer interfaces by grafting polymer chains. Carbon. (In Press)
Wang, Mingchao, Lai, Zheng Bo, Galpaya, Dilini, Yan, Cheng, Hu, Ning, & Zhou, Limin (2014) Atomistic simulation of surface functionalization on the interfacial properties of graphene-polymer nanocomposites. Journal of Applied Physics, 115(12), p. 123520.
Wang, Mingchao & Yan, Cheng (2014) Atomistic simulation of interfacial behaviour in graphene-polymer nanocomposites. Science of Advanced Materials, 6, pp. 1-5.
Wang, Mingchao & Yan, Cheng (2013) Numerical Modelling of Mechanical Behaviour of Graphene. In Tiwari, Atul & Balandin, Alexander A. (Eds.) Innovative Graphene Technologies : Evaluation and Applications, Volume 2. Smithers Rapra Publication, Shropshire, UK, pp. 91-124.
Wang, Mingchao, Yan, Cheng, & Hu, Ning (2013) Deformation and failure of graphene sheet and graphene-polymer interface. In 13th International Conference on Fracture, 16-21 June, Beijing, China. (In Press)
Wang, Mingchao, Yan, Cheng, & Ma, Lin (2012) Graphene nanocomposites. In Hu, Ning (Ed.) Composites and their Properties. InTech, Rijeka, Croatia, pp. 17-36.
Wang, Mingchao, Yan, Cheng, Ma, Lin, & Hu, Ning (2012) Molecular dynamics simulation of fracture strength and morphology of defective graphene. In Tieu, Kiet (Ed.) Proceedings of the 15th International Conference on Advances in Materials and Processing Technologies, University of Wollongong, Wollongong, Australia, pp. 12318-12323.
Wu, Liangke, Alamusi, , Xue, Junmin, Itoi, Takaomi, Hu, Ning, Li, Yuan, et al. (2014) Improved energy harvesting capability of poly(vinylidene fluoride) films modified by reduced graphene oxide. Journal of Intelligent Materials Systems and Structures. (In Press)
Xia, Kang, Zhan, Haifei, Wei, Ye, & Gu, YuanTong (2014) Tensile properties of a boron/nitrogen-doped carbon nanotube–graphene hybrid structure. Beilstein Journal of Nanotechnology, 5, pp. 329-336.
Yan, Cheng, Xiao, Keqin, Ye, Lin, & Mai, Yiu-Wing (2002) Numerical and experimental studies on the fracture behavior of rubber-toughened epoxy in bulk specimen and laminated composites. Journal of Materials Science, 37(5), pp. 921-927.
Yan, J.W., Zhang, G.P., Zhu, X.F., Liu, H.S., & Yan, C. (2013) Microstructures and strengthening mechanisms of Cu/Ni/W nanolayered composites. Philosophical Magazine, 93(5), pp. 434-448.
zhang, X. H., Yan, C., & Yu, Z. Z. (2004) In-situ combustion synthesis of ultrafine TiB2 particles reinforced Cu matrix composite. Journal of Materials Science, 39(14), pp. 4683-4685.