Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > MATERIALS ENGINEERING (091200) > Metals and Alloy Materials (091207)"
|Up a level|
- Subjects classification (47884)
- Australian and New Zealand Standard Research Classification (47884)
Group by: Authors/Creators | Item Type
Number of items at this level: 40.
Zhu, Xiaofei, Zhang, Guangping, & Yan, Cheng (2016) Grain boundary effects on microstructural stability of nanocrystalline metallic materials. In Tanski, Tomasz & Barek, Wojciech (Eds.) Study of Grain Boundary Character. INTECH, Croatia, pp. 143-159.
Ahsan, M., Ahmad, M.Z., Tesfamichael, Tuquabo, Bell, John, & Yarlagadda, Prasad (2013) Ethanol sensitivity of thermally evaporated nanostructured WO3 thin films doped and implanted with Fe. Applied Mechanics and Materials, 333-335(2013), pp. 1938-1945.
Chen, Hongtao, Wang, Chunqing, Yan, Cheng, Huang, Y., & Tian, Yanhong (2007) Effects of solder volume on formation and redeposition of Au-containing intermetallics in Au/Ni-SnAgCu-Ni(P) solder joints. Journal of Electronic Materials, 36(1), pp. 33-39.
Chen, Hongtao, Wang, Chunqing, Yan, Cheng, Li, Mingyu, & Huang, Y. (2007) Cross-interaction of interfacial reactions in Ni (Au/Ni/Cu)-SnAg-Cu solder joints during reflow soldering and thermal aging. Journal of Electronic Materials, 36(1), pp. 26-32.
Chen, J.H. & Yan, C. (1992) A comparison of toughness of C-Mn steel with different grain sizes. Metallurgical Transaction A, 23(9), pp. 2549-2556.
Chen, J.H., Yan, C., & Sun, J. (1994) Further study on the mechanism of cleavage fracture at low temperatures. Acta Metallurgica et Materialia, 42(1), pp. 251-261.
Chen, Yongnan, Yang, Wenqing, Zhan, Haifei, Zhang, Fengying, Huo, Yazhou, Zhao, Yongqing, et al. (2016) Tailorable burning behavior of Ti14 alloy by controlling semi-solid forging temperature. Materials, 9(8), Article no. 697.
Gu, YuanTong & Zhan, Haifei (2012) MD investigations for mechanical properties of copper nanowires with and without surface defects. International Journal of Computational Methods, 9(1), pp. 1-8.
Hasan, Md Shahanur, De Pellegrin, Dennis V., Hargreaves, Douglas, & Clegg, Richard (2016) Numerical investigation of hammer erosive wear due to particle impact. Applied Mechanics and Materials, 846, pp. 237-244.
Hu, Y.Q., Yan, Cheng, Zhang, H.F., Ye, Lin, & Hu, Z.Q. (2004) Preparation and hydrogenation characteristics of Mg–30 wt.% Ti37.5V25Cr37.5 composite. Journal of Alloys and Compounds, 375(1-2), pp. 265-269.
Hu, Y.Q., Zhang, H.F., Yan, Cheng, Ye, Lin, Ding, B.Z., & Hu, Z.Q. (2004) Preparation and hydrogenation of body-centered-cubic TiCr2 alloy. Materials Letters, 58(5), pp. 783-786.
Kent, Geoffrey A. (2011) Engineering the surface of a sugarcane roller mill roll for grip and durability. Materials Forum, 35, pp. 42-47.
Liu, Sheng, Huang, Han, & Gu, YuanTong (2012) Hardness of silicon nitride thin films characterised by nanoindentation and nanoscratch deconvolution methods. Materials Science and Technology, 28(9-10), pp. 1172-1176.
Lu, Li, Lai, M.O., Yan, Cheng, & Ye, Lin (2004) Nanostructured high strength Mg-5%Al-x%Nd alloys prepared by mechanical alloying. Reviews on Advanced Materials Science, 6(1), pp. 28-32.
Malekani, Javad, Schmutz, Beat, Gu, YuanTong, Schuetz, Michael, & Yarlagadda, Prasad K. (2012) Orthopedic bone plates : evolution in structure implementation technique and biomaterial. GSTF Journal of Engineering Technology (JET), 1(1), pp. 135-140.
Malekani, Javad, Schmutz, Beat, Gudimetla, Prasad, Gu, YuanTong, Schuetz, Michael, & Yarlagadda, Prasad K.D.V. (2013) Studies on bending limitations for the optimal fit of orthopaedic bone plates. Advanced Materials Research, 602-604, pp. 1181-1185.
Sarvghad, Madjid, Bell, Stuart, Raud, Ralf, Steinberg, Theodore A., & Will, Geoffrey (2017) Stress assisted oxidative failure of Inconel 601 for thermal energy storage. Solar Energy Materials and Solar Cells, 159, pp. 510-517.
Sarvghad, Madjid, Theo, Chenu, & Geoffrey, Will (2017) Comparative interaction of cold-worked versus annealed inconel 601 with molten carbonate salt at 450 °C. Corrosion Science. (In Press)
Tang, Shi-Yang, Khoshmanesh, Khashayar, Sivan, Vijay, Peterson, Phred, O'Mullane, Anthony P., Abbott, Derek, et al. (2014) Liquid metal enabled pump. Proceedings of the National Academy of Sciences of the United States of America, 111, p. 3304.
Weng, Shayuan, Ning, Huiming, Hu, Ning, Yan, Cheng, Fu, Tao, Peng, Xianghe, et al. (2016) Strengthening effects of twin interface in Cu/Ni multilayer thin films – A molecular dynamics study. Materials and Design, 111, pp. 1-8.
Yan, C., Chen, J.H., Sun, J., & Wang, Z. (1993) Critical assessment of the local cleavage stress σ ƒ * in notch specimens of C-Mn steel. Metallurgical Transactions A, 24(6), pp. 1381-1389.
Yan, C. & Mai, Y. W. (1997) Effect of constraint on ductile crack growth and ductile-brittle fracture transition of a carbon steel. International Journal of Pressure Vessels and Piping, 73(3), pp. 167-173.
Yan, Cheng, Bai, Ruixiang, Gu, YuanTong, & Ma, Wenjie (2008) Investigation on mechanical behaviour of AM60 magnesium alloys. Journal of Achievements in Materials and Manufacturing Engineering, 31(2), pp. 398-401.
Yan, Cheng, Ma, Wenjie, Burg, Vincent, & Chen, Mingwei (2007) Experimental and Numerical Investigation on Ductile-brittle Fracture Transition in a Magnesium Alloy. Journal of Materials Science, 42(18), pp. 7702-7707.
Yan, Cheng & Mai, Yiu-Wing (1998) Effect of constraint on void growth near a blunt crack tip. International Journal of Fracture, 92(3), pp. 287-304.
Yan, Cheng & Mai, Yiu-Wing (2000) Effect of crack depth and specimen width on fracture toughness of a carbon steel in the ductile-brittle transition region. International Journal of Pressure Vessels and Piping, 77(6), pp. 313-319.
Yan, Cheng & Mai, Yiu-Wing (1998) Numerical investigation on stable crack growth in plane stress. International Journal of Fracture, 91(2), pp. 117-130.
Yan, Cheng, Yan, L.L., Ye, Lin, Lu, Li, Lai, M.O., & Mai, Yiuwing (2003) Fabrication and microstructure of mechanically alloyed Mg-Al-Nd alloys. Materials Science Forum, 437-438, pp. 113-116.
Yarlagadda, Prasad K., Gudimetla, Prasad V., & Adam, Clayton J. (2002) Finite element analysis of high strain rate superplastic forming (SPF) of Al–Ti alloys. Journal of Materials Processing Technology, 130-13, pp. 469-476.
Zhan, Haifei & Gu, YuanTong (2011) Atomistic exploration of deformation properties of copper nanowires with pre-existing defects. Computer Modeling in Engineering & Sciences, 80(1), pp. 23-56.
Zhan, Haifei & Gu, YuanTong (2012) Modified beam theories for bending properties of nanowires considering surface/intrinsic effects and axial extension effect. Journal of Applied Physics, 111(8).
Zhan, Haifei & Gu, YuanTong (2012) Surface effects on the dual-mode vibration of <110> silver nanowires with different cross-sections. Journal of Physics D : Applied Physics, 45(46).
Zhan, Haifei & Gu, YuanTong (2012) Theoretical and numerical investigation of bending properties of Cu nanowires. Computational Materials Science, 55, pp. 73-80.
chu, qiaoling, zhang, min, Li, Jihong, Yan, Cheng, & qin, Zhanling (2017) Influence of vanadium filler on the properties of titanium and steelTIG welded joints. Journal of Materials Processing Technology, 240(February), pp. 293-304.
Bai, R, Gu, YuanTong, Ma, Wenjie, & Yan, Cheng (2008) Investigation on mechanical behaviour of AM60 magnesium alloys. In Yarlagadda, P & Gudimetla, P (Eds.) Proceedings of the 9th Global Congress on Manufacturing and Management (GCMM2008), 12 - 14 November 2008, Australia, Queensland, Gold Coast.
Diao, Hui, Yan, Cheng, Bell, John M., & Lu, Li (2011) Hall-petch relationship and strain rate sensitivity of nanocrystalline Mg - 5wt% A1 alloy. In The First International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 April 2011, Queensland University of Technology, Brisbane, Qld.
Malekani, Javad, Schmutz, Beat, Gu, YuanTong, Schuetz, Michael, & Yarlagadda, Prasad K. (2011) Biomaterials in orthopedic bone plates : a review. In Yarlagadda, Prasad K. (Ed.) Proceedings of the 2nd Annual International Conference on Materials Science, Metal & Manufacturing (M3 2011), Global Science and Technology Forum, Bali, Indonesia, pp. 71-77.
Xue, Yibin, Li, Tong, & Abdi, Frank (2013) Fatigue damage initiation life prediction for heterogeneous metals. In 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, American Institute of Aeronautics and Astronautics, Boston Park Plaza Hotel & Towers, Boston, Massachusetts, US.
Zhan, Haifei, Gu, YuanTong, Yan, Cheng, & Yarlagadda, Prasad K. (2012) Influence of grain boundaries on the vibrational properties of silver nanowires. In Gu, YuanTong & Saha, Suvash C. (Eds.) 4th International Conference on Computational Methods, Crowne Plaza, Gold Coast, QLD, pp. 1-8.
Ahsan, Mohammed, Yarlagadda, Prasad K., & Tesfamichael, Tuquabo (2012) Conductometric gas sensors based on nanostructured WO3 thin films. In 2nd International Conference on Materials Science, Metal and Manufacturing (M3 2012), 19-20 November 2012, Hotel Fort Canning, Singapore.