Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > MATERIALS ENGINEERING (091200) > Polymers and Plastics (091209)"
|Up a level|
- Subjects classification (42406)
- Australian and New Zealand Standard Research Classification (42406)
Group by: Authors/Creators | Item Type
Number of items at this level: 40.
Anandan, S., Pitchumani, S., Achari, Muthuraaman Bhagavathi , & Maruthamuthu, P. (2006) Heteropolyacid-impregnated PVDF as a solid polymer electrolyte for dye-sensitized solar cells. Solar Energy Materials and Solar Cells, 90(12), pp. 1715-1720.
Bock, Nathalie, Woodruff, Maria A., Hutmacher, Dietmar W., & Dargaville, Tim R. (2011) Electrospraying a reproducible method for production of polymeric microspheres for biomedical applications. Polymers, 3(1), pp. 131-149.
Dargaville, Tim R. (2002) Studies of the radiation chemistry and grafting of a fluoropolymer. PhD thesis, University of Queensland.
Dargaville, Tim R., Forster, Rebecca, Farrugia, Brooke L., Kempe, Kristian, Voorhaar, Lenny, Schubert, Ulrich S., et al. (2012) Poly(2-oxazoline) hydrogel monoliths via thiol-ene coupling. Macromolecular Rapid Communications, 33(19), pp. 1695-1700.
Dargaville, Tim R., Hill, David, & Perera, Senake (2002) Grafted fluoropolymers as supports for solid-phase organic chemistry : preparation and characterization. Australian Journal of Chemistry, 55(6), pp. 439-441.
Dargaville, Tim R., Hill, David, & Whittaker, Andrew K. (2001) An ESR study of irradiated poly(tetrafluoroethylene-co-perfluoropropyl vinyl ether) (PFA). Radiation Physics and Chemistry, 62(1), pp. 25-31.
De Pellegrin, Dennis (2012) Measuring the mechanical properties of ground ophthalmic polymer surfaces using nanoindentation. In AMPT 2012 15th International Conference on Advances in Materials and Processing Technologies, 23-26 September 2012, Wollongong, NSW.
Doherty, William, Halley, Peter, Edye, Leslie, Rogers, David, Cardona, Francisco, Park, Yoosup, et al. (2007) Studies on Polymers and Composites from Lignin and Fiber Derived from Sugar Cane. Polymers for Advanced Technologies, 18(8), pp. 673-678.
Doran, Michael & Choi, Phillip (2001) Molecular dynamics studies of the effects of branching characteristics on the crystalline structure of polyethylene. The Journal of Chemical Physics, 115(6), pp. 2827-2830.
Fawzia, Sabrina, Zhao, Xiao-Ling, & Al-Mahaidi, Riadh (2010) Bond–slip models for double strap joints strengthened by CFRP. Composite Structures, 92(9), pp. 2137-2145.
Galpaya, Dilini, Wang, Mingchao, Liu, Meinan, Motta, Nunzio, Waclawik, Eric R., & Yan, Cheng (2012) Recent advances in fabrication and characterization of graphene-polymer nanocomposites. Graphene, 1(2), pp. 30-49.
Gilfillan, William N. & Doherty, William O.S. (2014) Moisture and tensile strength properties of starch-sugar cane nanofibre films. International Sugar Journal, 116(1381), pp. 24-29.
Gilfillan, William N., Sopade, Peter A., & Doherty, William O.S. (2013) Moisture uptake and tensile properties of starch-sugar cane fibre films. International Sugar Journal, 115(1369), pp. 23-27.
Gilfillan, William Neil, Moghaddam, Lalehvash, & Doherty, William O. S. (2014) Preparation and characterization of composites from starch with sugarcane bagasse nanofibres. Cellulose, 21(4), pp. 2695-2795.
Gover, Rory & Gudimetla, Prasad (2011) Testing and simulation of extruded polystyrene foam at low to moderate strain rates. In Proceedings of the First International Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, Queensland University of Technology., Faculty of Built Environment and Engineering, Brisbane, Qld.
Grijpma, Dirk Willem, Melchels, Ferry Petrus Wilhelmus, Hou, Qing Pu, & Feijen, Jan (2006) Methacrylate-functionalized oligomers based on lactide, E-caprolactone and trimethylene carbonate for application in stereo-lithography. In Materials Research Innovations, Maney Publishing, Singapore, pp. 81-82.
Halley, Peter & George, Graeme (2009) Chemorheology of polymers: From fundamental principles to reactive processing. Cambridge University Press, United Kingdom, pp. 1-454.
Heidarkhan Tehrani, A., Singh, S., Jaiprakash, A., & Oloyede, A. (2014) Correlating flow induced shear stress and chondrocytes activity in micro-porous scaffold using computational fluid dynamics and rapid prototyping. In ASBTE 23rd Annual Conference of the Australian Society for Biomaterials and Tissue Engineering, 22-24 April 2014, Mantra Resort Lorne, Victoria, Australia.. (In Press)
Heidarkhan Tehrani, A., Zadhoush, A., Karbasi, S., & Sadeghi-Aliabadi, H. (2010) Scaffold percolative efficiency : in vitro evaluation of the structural criterion for electrospun mats. Journal of Materials Science : Materials in Medicine, 21(11), pp. 2989-2998.
Heidarkhan Tehrani, Ashkan, Davari, Pooya, Singh, Sanjleena, & Oloyede, Adekunle (2014) Fine tuning of elasticity via crosslinking collagen-based materials to mediate mechanotransduction and stability using corona treatment. In 23rd Annual Conference of the Australasian Society of Biomaterials and Tissue Engineering, Australian Society for Biomaterials and Tissue Engineering, Mantra Resort Lorne, Victoria, Australia, p. 145.
Heidarkhan Tehrani, Ashkan, Haghi, A. K., & , (2009) Technological Advances in Geotextiles. In Pethrick, Richard A., Zaikov, G. E., & Pielichowski, J. (Eds.) Monomers, Oligomers, Polymers, Composites and Nanocomposites Research : Synthesis, Properties and Applications. Nova Science Publishers, Inc. USA, New York City, USA, pp. 219-229.
Heidarkhan Tehrani, Ashkan & Saeed, Karbasi (2010) Preparing nanocomposite fibrous scaffolds of P3HB/nHA for bone tissue engineering. In Proceedings of the 17th Iranian Conference of Biomedical Engineering, IEEE, Isfahan University of Medical Isfahan, Iran, pp. 403-406.
Heidarkhan Tehrani, Ashkan, Singh, Sanjleena, & Oloyede, Adekunle (2014) Local stress-strain distribution and load transfer across cartilage matrix at micro-scale using combined microscopy-based finite element method. In 23rd Annual Conference of the Australasian Society of Biomaterials and Tissue Engineering, 22-24 April 2014, Mantra Resort Lorne, VIC.
Heidarkhan Tehrani, Ashkan, Zadhoush, Ali , Karbasi, Saeed , & Khorasani, Saied Nouri (2010) Experimental investigation of the governing parameters in the electrospinning of poly(3-hydroxybutyrate) scaffolds : structural characteristics of the pores. Journal of Applied Polymer Science, 118(5), pp. 2682-2689.
Hu, Ning, Karube, Yoshifumi, Arai, Masahiro, Watanabe, Tomonori, Yan, Cheng, Li, Yuan, et al. (2010) Investigation on sensitivity of a polymer/carbon nanotube composite strain sensor. Carbon, 48(3), pp. 680-687.
Humphreys, Matthew F. (2003) The use of polymer composites in construction. In 2003 International Conference on Smart and Sustainable Built Environment, November, 2003, Brisbane, Australia.
Jansen, Janine, Melchels, Ferry P.W., Grijpma, Dirk W., & Feijen, Jan (2009) Fumaric acid monoethyl ester-functionalized poly(D,L-Lactide)/N-vinyl-2- pyrrolidone Resins for the preparation of tissue engineering scaffolds by stereolithography. Biomacromolecules, 10(2), pp. 214-220.
Law, Susan H., van Eijkelenborg, Martijn A., Barton, Geoffrey W., Yan, Cheng, Lwin, Richard, & Gan, J. (2006) Cleaved end-face quality of microstructured polymer optical fibres. Optics Communications, 265(2), pp. 513-520.
Miao, Xigeng, Hu, Yifei, Liu, Jianli, & Wong, A. P. (2004) Porous calcium phosphate ceramics prepared by coating polyurethane foams with calcium phosphate cements. Materials Letters, 58(3-4), pp. 397-402.
Moghaddam, L., Martin, D. J., Halley, P. J., & Fredericks, P. M. (2009) Vibrational spectroscopic studies of laboratory scale polymer melt processing : application to a thermoplastic polyurethane nanocomposite. Vibrational Spectroscopy, 51(1), pp. 86-92.
Mona, Mehraban, Ali , Zadhoush, Seyed Abdolkarim , Hosseini Ravandi, Rouhollah , Bagheri, & Heidarkhan Tehrani, Ashkan (2013) Preparation of porous nanofibers from electrospun polyacrylonitrile/calcium carbonate composite nanofibers using porogen leaching technique. Journal of Applied Polymer Science, 128(2), pp. 926-933.
Muhsin, Mohammad, George, Graeme A., Beagley, Kenneth, Ferro, Vito, Armitage, Charles, & Islam, Nazrul (2014) Synthesis and toxicological evaluation of a chitosan‑L‑leucine conjugate for pulmonary drug delivery applications. Biomacromolecules, 15, pp. 3596-3607.
Thiyahuddin, Izzat, Gu, YuanTong, Thambiratnam, David, & Thilakarathna, Herath Mudiyanselage Indika (2014) Impact and energy absorption of portable water-filled road safety barrier system fitted with foam. International Journal of Impact Engineering, 72, pp. 26-39.
Yan, Cheng, Bai, Ruixiang, Yu, Hong, Canning, John, & Law, S.S. (2010) The strength and failure of silica optical fibers. Physica Scripta, 2010(T139), pp. 1-5.
Yan, Cheng, Law, Susan H., Suchowerska, Natalka, & Hong, Suk-Hwa (2007) Radiation damage to polymer optical fibres. In Fifth Australasian Congress on Applied Mechanics (ACAM 2007), 10–12 December, 2007, Brisbane.
Yan, Cheng, Xiao, Keqin, Ye, Lin, & Mai, Yiu-Wing (2002) Numerical and experimental studies on the fracture behavior of rubber-toughened epoxy in bulk specimen and laminated composites. Journal of Materials Science, 37(5), pp. 921-927.
Yarlagadda, Prasad, Butdee, Suthep, & Suebsomran, Anan (2009) Joining, machining, finishing and decorating of polymers. In Thomas, S & Weimin, Y (Eds.) Advances in polymer processing. Woodhead Publishing, United Kingdom, pp. 698-714.
Yarlagadda, Prasad K. (2001) Study on microwave dielectric properties of epoxy resin mixtures used for rapid product development. Acta Metallurgica Sinica (English Letters), 14(1), pp. 1-12.
Yu, Zhong-Zhen, Yan, Cheng, Dasari, Aravind, Dai, Shaocong, Mai, Yiu-Wing, & Yang, Mingshu (2004) On toughness and stiffness of poly(butylene terephthalate) with epoxide-containing elastomer by reactive extrusion. Macromolecular Materials and Engineering, 289(8), pp. 763-770.
Yu, Zhong-Zhen, Yan, Cheng, Yang, Mingshu, & Mai, Yiu-Wing (2004) Mechanical and dynamic mechanical properties of nylon 66/montmorillonite nanocomposites fabricated by melt compounding. Polymer International, 53(8), pp. 1093-1098.