Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > MECHANICAL ENGINEERING (091300)"

Subjects classification (26013)
- Australian and New Zealand Standard Research Classification (26013)
  - ENGINEERING (090000) (3648)
    - MECHANICAL ENGINEERING (091300) (476)
      - Acoustics and Noise Control (excl. Architectural Acoustics) (091301) (5)
      - Automation and Control Engineering (091302) (37)
      - Autonomous Vehicles (091303) (6)
      - Dynamics Vibration and Vibration Control (091304) (41)
      - Energy Generation Conversion and Storage Engineering (091305) (10)
      - Mechanical Engineering not elsewhere classified (091399) (203)
      - Microelectromechanical Systems (MEMS) (091306) (2)
      - Numerical Modelling and Mechanical Characterisation (091307) (94)
      - Solid Mechanics (091308) (11)
      - Tribology (091309) (7)

Group by: Authors/Creators | Item Type

Jump to: A | B | C | D | G | H | K | L | M | N | P | R | S | T | W | Y | Z

Number of items at this level: 118.

A

Adams, Michelle, Lean, Melanie, Hitchick, Nola, & Beagley, Kenneth (2005) The efficacy of propionibacterium jensenii 702 to stimulate a cell-mediated response to orally administered soluble mycobacterium tuberculosis antigens using a mouse model. Dairy Science and Technology, 85(1), pp. 75-84.

Anapayan, Tharmarajah, Mahendran, Mahen, & Mahaarachchi, Dhammika (2010) Lateral distortional buckling tests of a new hollow flange channel beam. Thin-Walled Structures, 49(1), pp. 13-25.

B

Bayissa, Wirtu & Haritos, Nicholas (2007) Structural damage identification in plates using spectral strain energy analysis. Journal of Sound and Vibration, 307(1-2), pp. 226-249.

Bayissa, Wirtu & Haritos, Nicholas (2009) Structural damage identification using a global optimization technique. International Journal of Structural Stability and Dynamics, 9(4), pp. 745-763.

Bayissa, Wirtu, Haritos, Nicholas, & Thelandersson, S. (2008) Vibration-based structural damage identification using wavelet transform. Mechanical Systems and Signal Processing, 22(5), pp. 1194-1215.

Bodisco, Timothy A. & Brown, Richard J. (2010) Statistical modeling to determine resonant frequency information present in combustion chamber pressure signals. In Mallinson, G.D. & Cater, J.E. (Eds.) Proceedings of the 17th Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, University of Auckland, pp. 1-4.

Bodisco, Timothy A., Reeves, Robert W., Situ, Rong, & Brown, Richard J. (2011) Bayesian models for the determination of resonant frequencies in a DI diesel engine. Mechanical Systems and Signal Processing, pp. 1-10. (In Press)

Brooks, Alex, Makarenko, Alexei, & Upcroft, Ben (2008) Gaussian process models for indoor and outdoor sensor-centric robot localization. IEEE Transactions on Robotics, 24(6), pp. 1341-1351.

C

Chen, Gongfa, Fukuyama, Hiroshi, Teshigawara, Muki, Etoh, Hiro, Kusunoki, Kaida, & Suwada, H (2007) Numerical Simulation of Columns with Un-bonded Reinforcing Bars for Crack Control. Structural Engineering and Mechanics, 26(4), pp. 409-426.

Cheng, Charles Chor Kwan, Leung, Andrew Yee Tak, Lam, Kit Ming, Demirbilek, Nur, & Williamson, Brian J. (2010) A CFC study of Hong Kong refuge floor design : floor height effect. Engineering Applications of Computational Fluid Mechanics, 4(3), pp. 425-433.

Chuan Chai, Tan & Yarlagadda, Prasad K. (1998) An investigation into welding of engineering thermoplastics using focused microwave energy. Journal of Materials Processing Technology, 74(1-3), pp. 199-212.

Crawford, Shane, Murray, Martin H., & Powell, John (2001) Development of a Mechanistic Model for the Determination of Track Modulus. In 7th International Heavy Haul Conference, 10-14 June 2001, Brisbane, Australia.

1,361

D

Davis, Lloyd E. & Bunker, Jonathan M. (2008) Suspension testing of 3 heavy vehicles – methodology and preliminary frequency analysis. Report. State of Queensland (Department of Main Roads) & Queensland University of Technology, Brisbane, Queensland.

412

De Pellegrin, Dennis, Corbin, Normand, Baldoni, Gary, & Torrance, Andrew (2009) Diamond particle shape: Its measurement and influence in abrasive wear. Tribology International, 42(1), pp. 160-168.

Dhanasekar, Manicka & Haider, W (2008) Explicit finite element analysis of lightly reinforced masonry shear walls. Computers and Structures, 86(1-2), pp. 15-26.

Dhanasekar, Manicka, Han, Jianjun, & Qin, Qinghua (2006) A hybrid-Trefftz element containing an elliptic hole. Finite Elements in Analysis and Design, 42(14-15), pp. 1314-1323.

Dixon, Terry, Mann, Anthony, Plaza, Floren, & Gilfillan, W (2005) Development of advanced technology for biomass combustion - CFD as an essential tool. Fuel: the science and technology of fuel and energy, 84(10), pp. 1303-1311.

Dolamune Kankanamge, Nirosha & Mahendran, Mahen (2010) Mechanical properties of cold-formed steels at elevated temperatures. Thin-Walled Structures, 49(1), pp. 26-44.

G

Gadomski, A, Pawlak, Zenon, & Oloyede, Kunle (2008) Directed ion transport as virtual cause of some facilitated friction-lubrication mechanism prevailing in articular cartilage: A hypothesis. Tribology Letters, 30(2), pp. 83-90.

Gao, Chongyang, Fang, Bin, & Gu, YuanTong (2010) Theoretical analysis of serrated chip formation based on ideal models in high speed cutting. Advanced Materials Research, 154-(155), pp. 239-245.

Geng, Li, Feng, Wei, Hutmacher, Dietmar, Wong, Yoke San, Loh, Han Tong, & Fuh, Jerry (2005) Direct writing of chitosan scaffolds using a robotic system. Rapid Prototyping Journal, 11(2), pp. 90-97.

Gibson, Ian, Savalani, Monica, Lam, Christopher, Olkowski, Radoslow, Ekaputra, A, Tan, Kim Cheng, et al. (2009) Towards a medium/high load-bearing scaffold fabrication system. Tsinghua Science and Technology, 14(1), pp. 13-19.

Gu, Y.T., Wang, W., Zhang, L.C., & Feng, X.Q. (2010) An enriched radial point interpolation method (e-RPIM) for analysis of crack tip fields. Engineering Fracture Mechanics, 78(2011), pp. 175-190.

Gu, YuanTong & Liu, Gui-Rong (2005) Meshless methods coupled with other numerical methods. Tsinghua Science and Technology, 10(1), pp. 8-15.

Gu, YuanTong & Liu, Gui-Rong (2006) Meshless techniques for convection dominated problems. Computational Mechanics, 38(2), pp. 272-283.

Gu, YuanTong & Liu, Gui-Rong (2005) A meshfree weak-strong (MWS) form method for time dependant problems. Computational Mechanics, 35(2), pp. 134-145.

Gu, YuanTong, Wang, Qingxia, & Lam, K (2007) A meshless local Kriging method for large deformation analyses. Computer Methods in Applied Mechanics and Engineering, 196(9-12), pp. 1673-1684.

H

Hargreaves, Douglas, Ma, Lin, Stapelberg, Rudolph, Wiliem, Leonard, & Yarlagadda, Prasad (2006) A Real-Time Lossless Compressing Algorithm for Real-Time Condition Monitoring System. In Kumar, U, Parida, A, & Rao, R (Eds.) Condition Monitoring and Diagnostic Engineering Management: Proceedings of the 19th International Congress, 12 - 15 June 2006, Sweden, Lulea.

Hasan, M.N., Saha, S., & Saha, S.C. (2011) Effects of corrugation frequency and aspect ratio on natural convection within an enclosure having sinusoidal corrugation over a heated top surface. International Communications in Heat and Mass Transfer. (In Press)

Hasan, Muhammad Noman, Saha, Suvash C., & Gu, YuanTong (2011) Effect of differentially heating and consequent transient behaviour for natural convection within an enclosure of sinusoidal corrugated side walls. In Proceedings of the International Conference on Mechanical Engineering 2011, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh.

Hawari, Haitham M. & Murray, Martin H. (2009) Correlating vehicle forces and track profile. Transport Engineering in Australia, 12(1), pp. 37-48.

Heng, Soong, Tan, Andy, Mathew, Joseph, Montgomery, Neil, Banjevic, Dragan, & Jardine, Andrew (2009) Intelligent condition-based prediction of machinery reliability. Mechanical Systems & Signal Processing, 23(N/A), pp. 1600-1614.

Heng, Soong, Zhang, Sheng, Tan, Andy, & Mathew, Joseph (2009) Rotating machinery prognostics. State of the art, challenges and opportunities. Mechanical Systems and Signal Processing, 23(3), pp. 724-739.

Hu, Jinqiu, Zhang, Laibin, Ma, Lin, & Liang, Wei (2010) An integrated method for safety pre-warning of complex system. Safety Science, 48(5), pp. 580-597.

K

Kang, Bong-Yong, Kang, Mun-Jin, Posinasetti, Praveen, & Yarlagadda, Prasad (2006) Influence of Pulsing Parameters on Metal Transfer Mode in Pulse Gas Metal Arc Welding of Aluminium. In Mehta, B (Ed.) Proceedings of Advances in Materials and Processing Technologies (AMPT) 2006, 30 July - 3 August 2006, United States of America, Nevada, Las Vegas.

Kaphle, Manindra R. & Tan, Andy (2009) Source location of acoustic emission waves for structural health monitoring of bridges. In Jaiswal, Sumeet & Wang, Liang (Eds.) Infrastructure Research Theme Postgraduate Student Conference 2009 : Rethinking Sustainable Development : Planning, Engineering, Design and Managing Urban Infrastructure, 26 March 2009, QUT, Brisbane.

168

Karim, Azharul & Hawlader, M. (2005) Mathematical modelling and experimental investigation of tropical fruits drying. International Journal of Heat and Mass Transfer, 48(23-24), pp. 4914-4925.

Karim, Azharul & Hawlader, M. (2006) Performance evaluation of a v-groove solar air collector for drying applications. Applied Thermal Engineering, 26(1), pp. 121-130.

Karim, Azharul & Hawlader, M. (2006) Performance investigation of flat plate, v-corrugated and finned air collectors. Energy, 31(4), pp. 452-470.

Kaupp, Tobias, Douillard, Bertrand, Ramos, Fabio, Makarenko, Alexei, & Upcroft, Ben (2007) Shared environment representation for a human-robot team performing information fusion. Journal of Field Robotics, 24(11-12), pp. 911-942.

Kim, Eric, Tan, Andy, & Yang, Bo-Suk (2008) Parameter comparison of acoustic emission signals for condition monitoring of low-speed bearings. Australian Journal of Mechanical Engineering, 6(1), pp. 45-52.

Kim, Eric, Tan, Chit, Yang, Bo-Suk, Kim, Won-Cheol, Choi, Beong-Keun, & An, Young-Su (2007) Optimum Shape Design of Rotating Shaft by ESO Method. Journal of Mechanical Science and Technology, 21(7), pp. 1039-1047.

Klein, Travis J., Rizzi, Simone C., Schrobback, Karsten, Reichert, Johannes C., Jeon, June, Crawford, Ross W., et al. (2010) Long-term effects of hydrogel properties on human chondrocyte behavior. Soft Matter, 6(20), pp. 5175-5183.

Kosse, Vladis & De Pellegrin, Dennis (2011) Teaching motor racing engineering through real-life projects: benefits and challenges. In Uhomoibhi, James (Ed.) Proceedings of the 17th International Conference on Engineering Education: Engineering Sustainability for a Global Economy, ICEE-2011, Belfast, Northern Ireland, UK, pp. 1-7.

Kosse, Vladis & De Pellegrin, Dennis (2011) Teaching tribology and maintenance-related subjects : a hands-on focus. In Uhomoibhi, James (Ed.) Proceedings of the 17th International Conference on Engineering Education: Engineering Sustainability for a Global Economy, ICEE-2011, Northern Ireland, Belfast, pp. 1-8.

Kreiser, Dean, Jia, Sheng Xiang, Han, Jianjun, & Dhanasekar, Manicka (2007) A nonlinear damage accumulation model for shakedown failure. International Journal of Fatigue, 29(8), pp. 1523-1530.

L

Lee, Tae-Ho, Situ, Rong, Hibiki, Takashi, Park, Hyun-Sik, Ishii, Mamoru, & Mori, Michitsugu (2009) Axial developments of interfacial area and void concentration profiles in subcooled boiling flow of water. International Journal of Heat and Mass Transfer, 52(1-2), pp. 473-487.

Lin, Tian Ran (2011) An analytical and experimental study of the vibration response of a clamped ribbed plate. Journal of Sound and Vibration. (In Press)

Lin, Tian Ran, Mechefske, Chris, & O'Shea, Peter J. (2011) Characteristics of modal sound radiation of finite cylindrical shells. Journal of Vibration and Acoustics, 133(5), 051011-1.

Lin, Tian Ran & Pan, Jie (2006) Vibration localization of finite plates with disordered and irregular rib spacing. In Inter-Noise 2006, 2-6 December 2006, Hawaii, USA.

Lin, Tian Ran & Tan, Andy (2011) Characterizing the signal pattern of a four-cylinder diesel engine using acoustic emission and vibration analysis. In Shen, Gongtian & Wu, Zhanwen (Eds.) Proceedings of World Conference on Acoustic Emission -2011, Chinese Society for Non-destructive Testing, Beijing International Convention Center, Beijing, pp. 506-515.

Lin, Tian Ran, Tan, Andy C. C., Ma, Lin, & Mathew, Joseph (2011) Estimating the loading condition of a diesel engine using instantaneous angular speed analysis. In Lee, Jay (Ed.) Proceedings of the 6th World Congress on Engineering Asset Management, Springer, Duke Energy Center, Cincinatti, Ohio. (In Press)

Lin, Tian Ran, Tan, Andy C. C., & Mathew, Joseph (2011) Condition monitoring and diagnosis of injector faults in a diesel engine using in-cylinder pressure and acoustic emission techniques. In Law, S.S., Cheng, Li, Xia, Yong, & Su, Zhongqing (Eds.) Dyanmics for Sustainable Engineering, The HongKong Polytechnic University, Hong Kong Polytechnic University, pp. 454-463.

Liu, Gui-Rong, Zhang, Guiyong, Gu, YuanTong, & Wang, Y (2005) A meshfree radial point interpolation method (RPIM) for three-dimensional solids. Computational Mechanics, 36(6), pp. 421-430.

Liu, Xiaofeng, Ma, Lin, & Mathew, Joseph (2007) Rotating machinery fault diagnosis based on fuzzy data fusion techniques. In 2nd World Congress on Engineering Asset Management and the 4th International Conference on Condition Monitoring, 11-14 June 2007, Harrogate, England.

482

Liu, Xiaofeng, Ma, Lin, Zhang, Sheng, & Mathew, Joseph (2006) Feature group optimization for machinery fault diagnosis based on fuzzy measures. In Mathew, Joseph, Ma, Lin, Tan, Andy, & Anderson, Deryk (Eds.) 1st World Congress on Engineering Asset Management, 11-14 July 2006, Gold Coast, Australia.

233

Liu, Xiaofeng, Ma, Lin, Zhang, Sheng, & Mathew, Joseph (2005) Machinery fault diagnosis schemas based on fuzzy integral theory. In International Conference on Condition Monitoring, 18-21 July 2005, Cambridge, England.

365

Liu, Xiaofeng, Ma, Lin, Zhang, Sheng, & Mathew, Joseph (2005) Using fuzzy c-means and fuzzy integrals for machinery fault diagnosis. In International Conference on Condition Monitoring, 18-21 July 2005, Cambridge, England.

453

Lowe, David, Wu, Weiliang, & Tan, Andy (2011) Experimentally induced diesel engine injector faults and some preliminary acoustic emission signal observations. In World Congress on Engineering Asset Management, 3-5 October 2011, Cincinnati, USA. (In Press)

Lynn, David Benjamin, Plagens, Owen, Castillo, Martin, Paulos, Todd, & Steinberg, Ted (2010) The increased flammability of metallic materials burning in reduced gravity. In Proceedings of the 4th International Association for the Advancement of Space Safety Conference : Making Safety Matter, International Association for the Advancement of Space Safety, Braun Center, Huntsville, Alabama.

M

Madasu, Vamsi, Posinaseeti, Praveen, & Yarlagadda, Prasad (2009) Fuzzy modelling based estimation of short circuit severity in pulse gas metal arc welding. Australian Journal of Mechanical Engineering, 7(1), pp. 9-17.

Mahaarachchi, Dhammika & Mahendran, Mahen (2009) Wind uplift strength of trapezoidal steel cladding with closely spaced ribs. Journal of Wind Engineering and Industrial Aerodynamics, 97(3-4), pp. 140-150.

Mathew, Avin D., Purser, Michael, Ma, Lin, & Barlow, Matthew (2010) Open standards-based system integration for asset management decision support. In Kiritsis, Dimitris, Emmanouilidis, Christos, Koronios, Andy, & Mathew, Joseph (Eds.) Proceedings of the Fourth World Congress on Engineering Asset Management (WCEAM) 2009, Springer-Verlag London Limited, Athens, Greece, pp. 221-229.

384

Morgan, Dana, Triani, Gerry, Blackford, Mark, Raftery, Tony, Frost, Ray, & Waclawik, Eric (2010) Alkaline hydrothermal kinetics in titanate nanostructure formation. Journal of Materials Science, 46(2), pp. 548-557.

N

Najafi, Massieh, Auslander, David M., Bartlett, Peter L., & Haves, Philip (2008) Application of machine learning in fault diagnostics of mechanical systems. In Proceedings of the World Congress on Engineering and Computer Science 2008: International Conference on Modeling, Simulation and Control 2008, International Association of Engineers, San Fransisco, pp. 957-962.

Newman, Paul, Sibley, Gabe, Smith, Mike, Cummins, Mark, Harrison, Alastair, Mei, Chris, et al. (2009) Navigating, recognizing and describing urban spaces with vision and lasers. International Journal of Robotics Research, 28(11 - 1), pp. 1406-1433.

P

Palmer, Sara & Frost, Ray (2009) Characterisation of bauxite and seawater neutralised bauxite residue using XRD and vibrational spectroscopic techniques. Journal of Material Science, 44(1), pp. 55-63.

Pawlak, Z, Kaldonski, T, Pai, Raghuvir, Bayraktare, E, & Oloyede, Kunle (2009) A comparative study on the tribological behaviour of hexagonal boron nitride (h-BN) as lubricating micro-particles - An additive in porous sliding bearings for a car clutch. Wear, 267(5-8), pp. 1198-1202.

Pawlak, Z., Cartwright, P.S., Oloyede, Adekunle, & Bayraktar, E. (2010) Removal of toxic arsenic and antimony from groundwater Spiro Tunnel Bulkhead in Park City Utah using colloidal iron hydroxide : comparison with reverse ssmosis. Advanced Materials Research, 83-86, pp. 553-562.

Pawlak, Zenon, Crawford, Ross, & Oloyede, Kunle (2008) Hypothetical model of hydrophilic lubrication in synovial joints. Australian Journal of Mechanical Engineering, 6(1), pp. 21-26.

Pawlak, Zenon, Yarlagadda, Prasad, Frost, Ray L., & Hargreaves, Douglas (2006) The mechanical strength of phosphates under friction-induced cross-linking. Journal of Achievements in Materials and Manufacturing Engineering, 17(1-2), pp. 201-204.

R

Ramos, Fabio, Kumar, Suresh, Upcroft, Ben, & Durrant-Whyte, Hugh (2008) A natural feature representation for unstructured environments. IEEE Transactions on Robotics, 24(6), pp. 1329-1340.

Ranawaka, R & Mahendran, Mahen (2010) Numerical modelling of light gauge cold-formed steel compression members subjected to distortional buckling at elevated temperatures. Thin-Walled Structures, 48(4-5), pp. 334-344.

Ranjan, V., Pai, R., & Hargreaves, D. (2006) Stiffness and damping coefficients of 3-axial groove water lubricated bearing using perturbation technique. In 5th EDF and LMS Poitiers Workshop 'Bearing Behaviour Under Unusual Operating Conditions', Futurescope, 5th October 2006.

Rosenberg, David, Sindhwani, Vikas, Bartlett, Peter L., & Niyogi, Partha (2009) Multiview point cloud kernels for semisupervised learning [Lecture Notes]. IEEE Signal Processing Magazine, 26(5), 145-150 .

S

Sadik, Amin, Hussain, Zahir, Yu, Xinghuo, & O'Shea, Peter (2007) An Approach for Stability Analysis of a Single-Bit High-Order Digital Sigma-Delta Modulator. Digital Signal Processing, 17(6), pp. 1040-1054.

Saha, Suvash C. (2009) Natural convection adjacent to an inclined flat plate and in an attic space under various thermal forcing conditions. PhD thesis, School of Engineering and Physical Sciences.

Saha, Suvash C. (2011) Natural convection in the attic-shaped spaces. In Acosta, Morena J. (Ed.) Advances in Energy Research. Nova Science Publishers, Inc., New York. (In Press)

Saha, Suvash C. (2007) Natural convection of a side heated square cavity with wavy hot surface. In 8th Biennial Engineering Mathematics & Applications Conference (EMAC 2007), 1 - 4 July 2007, University of Tasmania, Sandy Bay, Hobart. (Unpublished)

Saha, Suvash C. & Gu, YuanTong (2011) Free convection in a triangular enclosure with fluid-saturated porous medium and internal heat generation. In 10th Engineering Mathematics and Applications Conference, 4th - 7th December 2011, University of Technology Sydney,Sydney. (Unpublished)

Saha, Suvash C. & Gu, YuanTong (2011) Natural convection in a triangular enclosure due to non-uniform cooling on top. In 10th Engineering Mathematics and Applications Conference, 4th - 7th December 2011, University of Technology, Sydney, Sydney, N.S.W.. (Unpublished)

Saha, Suvash C. & Gu, YuanTong (2011) Prandtl number scaling of natural convection of an inclined flat plate due to uniform surface heat flux. In 10th Engineering Mathematics and Applications Conference (EMAC 2011), 4th - 7th December 2011, University of Technology Sydney, Sydney, NSW. (Unpublished)

Saha, Suvash C., Gu, YuanTong, & Hossain, Md. Anwar (2011) Free convection heat transfer through coupled thermal boundary layers in a partitioned triangular enclosure. In Proceedings of the International Conference on Mechanical Engineering 2011, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh.

Saha, Suvash C., Gu, YuanTong, Molla, Md. Mamun, Siddiqa, Sadia, & Hossain, Md. Anwar (2011) Natural convection from a vertical plate embedded in a stratified medium with uniform heat source. Desalination and Water Treatment : Science and Engineering. (In Press)

Saha, Suvash C. & Hasan, Muhammad Noman (2011) Mixed convection laminar flow along a horizontal plate subject to streamwise sinusoidal surface temperature. In Proceedings of the International Conference on Mechanical Engineering 2011, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh.

Shinde, Jagdish Shivaji, Ma, Lin, & Karim, Azharul (2011) Integrated Acquisition Engineering Model for acquiring heavy engineering assets. In Singh, Manish, Rao, Raj B.K.N., & Liyanage, J.P. (Eds.) Integrated Acquisition Engineering Model for acquiring heavy engineering assets, COMADEM International, Clarion Hotel, Stavanger, Norway, pp. 1625-1631.

Siegenthaler, Alfred & Madhani, Jehangir T. (1998) Experimental Verification of Departure from-Rankine- Hugoniot Behaviour in Weak Mach Reflection. In 13th Australasian Fluid Mechanics Conference, 13-18 December 1998, Monash University, Melbourne, Australia.

428

Sikorska, Joanna, Hodkiewicz, Melinda, & Ma, Lin (2011) Prognostic modelling options for remaining useful life estimation by industry. Mechanical Systems and Signal Processing, 25(5), pp. 1803-1836.

Singamneni, Sarat, St. George, John, Choudhury, Asimava, & Yarlagadda, Prasad (2009) Rapid casting: a critical analysis of mould and casting characteristics. Australian Journal of Mechanical Engineering, 7(1), pp. 33-43.

Situ, Rong, Brown, Richard J., Ristovski, Zoran, Kruger, Uli, & Hargreaves, Douglas J. (2008) Analysis of dual fuel compression ignition (diesel) engine. In Masataka, Arai & Daisho, Yasuhiro (Eds.) The Seventh International Conference on Modeling and Diagnostics for Advanced Engine Systems, 28-31 July 2008, Sapporo, Japan.

648

Sreejith, Plappillimadam & Yarlagadda, Prasad (2009) Studies of bone cell adhesion and proliferation on ion-implanted titanium discs. Australian Journal of Mechanical Engineering, 7(1), pp. 77-82.

T

Tahri, Omar, Mezouar, Youcef, Chaumette, Francois, & Corke, Peter (2010) Decoupled image-based visual servoing for cameras obeying the unified projection model. IEEE Transactions on Robotics, 26(4), p. 684.

Tan, Andy, Karimi, Mahdi, & Mathew, Joseph (2008) Blind deconvolution using the eigenvector algorithm (EVA) method for the enhancement of bearing signal through the transmission channel. Australian Journal of Mechanical Engineering, 5(2), pp. 151-156.

Thilakarathna, Herath Mudiyanselage Indika, Thambiratnam, David, Dhanasekar, Manicka, & Perera, Nimal (2010) Numerical simulation of axially loaded concrete columns under transverse impact and vulnerability assessment. International Journal of Impact Engineering, 37(11), pp. 1100-1112.

350

Tuan, Barnabas Ho Saey & Hutmacher, Dietmar (2005) Application of micro CT and computation modeling in bone tissue engineering. Computer Aided Design, 37(11), pp. 1151-1161.

Turner, Ian, Rousset, Patrick, Remond, Romain, & Perre, Patrick (2010) An experimental and theoretical investigation of the thermal treatment of wood (Fagus sylvatica L.) in the range 200-260 °C. International Journal of Heat and Mass Transfer, 53(4), pp. 715-725.

W

Wang, Shi-jin, Mathew, Avin D., Chen, Yan, Xi, Li-feng, Ma, Lin, & Lee, Jay (2009) Empirical analysis of support vector machine ensemble classifiers. Expert Systems with Applications, 36(3, Part 2), pp. 6466-6476.

Ward, Nicholas & Steinberg, Theodore (2007) Geometry of the Melting Interface in Cylindrical Metal Rods under Microgravity Conditions. Comptes Rendus Mecanique (Academie des Sciences), 335(5-6), pp. 342-350.

Wilson, Lance J., Hargreaves, Douglas J., Clegg, Richard E., & Powell, John (2008) Methodology for Measurement of Lubricant Decay Rate for Rail Lubricants. In NORDTRIB 2008 : 13th Nordic Symposium on Tribology, 10-13 June 2008, Tampere, Finland. (Unpublished)

228

Wu, Weiliang, Lowe, David, & Tan, Andy (2011) A study on acoustic emission signal propagation of a small size multi-cylinder diesel engine. In Lee, Jay (Ed.) Proceedings of the Sixth World Congress on Engineering Asset Management WCEAM 2011, WCEAM, United States of America, Ohio, Cincinatti, pp. 1-12.

Wu, Weiliang, Tan, Andy, & Kim, Eric (2010) Enhancing acoustic emission signals from multi-cylinder diesel engine. In 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 December 2010, Perth, Western Australia. (In Press)

Wu, Y, Lui, G, & Gu, YuanTong (2005) Application of meshless local Petrov-Galerkin (MLPG) approach to simulation of incompressible flow. Numerical Heat Transfer Part B: Fundamentals: an international journal of computation and methodology, 48(5), pp. 459-475.

Wu , Chengtie, Luo, Yongxiang, Cuniberti, Gianaurelio, Xiao, Yin, & Gelinsky, Michael (2011) Three-dimensional printing of hierarchical and tough mesoporous bioactive glass scaffolds with a controllable pore architecture, excellent mechanical strength and mineralization ability. Acta Biomaterialia, 7(6), pp. 2644-2650.

Y

Yan, Cheng, Bai, R, Yarlagadda, Prasad, & Yu, Hao (2009) Fracture behaviour of microstructured silica optical fibres. Australian Journal of Mechanical Engineering, 7(1), pp. 93-98.

Yan, Cheng, Mai, Yiu-Wing, & Ye, Lin (2001) Effect of bond thickness on fracture behaviour in adhesive joints. Journal of Adhesion, 75(1), pp. 27-44.

311

Yan, Chenglin, Zou, Longjiang, Xue, Dongfeng, Xu, Jiasheng, & Liu, Meinan (2008) Chemical tuning polymorphology of functional materials by hydrothermal and solvothermal reactions. Journal of Materials Science, 43(7), pp. 2263-2269.

Yang, Hongyu, Mathew, Joseph, & Ma, Lin (2005) Fault diagnosis of rolling element bearings using basis pursuit. Mechanical Systems and Signal Processing, 19(2), pp. 341-356.

Yang, Hongyu, Mathew, Joseph, & Ma, Lin (2002) Intelligent diagnosis of rotating machinery faults - A review. In 3rd Asia-Pacific Conference on Systems Integrity and Maintenance, ACSIM 2002, 25-27 September 2002, Cairns, Australia.

1,759

Yang, Hongyu, Mathew, Joseph, & Ma, Lin (2003) Vibration feature extraction techniques for fault diagnosis of rotating machinery : a literature survey. In Asia-Pacific Vibration Conference, 12-14 November 2003, Gold Coast, Australia.

666

Yang, Hongyu, Mathew, Joseph, Ma, Lin, & Kosse, Vladis (2004) Matching pursuit feature based neural network pattern recognition of ball bearing faults. In International Conference of Maintenance Societies 2004, 25-28 May 2004, Sydney, Australia.

343

Yang, Jing, Baker, Adrian, Liu, Hongwei, Martens, Wayde, & Frost, Ray (2010) Size-controllable synthesis of chromium oxyhydroxide nanomaterials using a soft chemical hydrothermal route. Journal of Materials Science, 45(24), pp. 6574-6585.

Yarlagadda, Prasad, Posinaseeti, Praveen, Madasu, Vamsi, & Rhee, Sehun (2007) Detection of Short Circuit in Pulse Gas Metal Arc Welding Process. Journal of Achievements in Materials and Manufacturing Engineering, 24(1), pp. 328-332.

Ye, Xin, Pendyala, Ram, Washington, Simon, Konduri, Karthik, & Oh, Jutaek (2009) A simultaneous equations model of crash frequency by collision type for rural intersections. Safety Science, 47(3), pp. 443-452.

Z

Zhan, Haifei & Gu, YuanTong (2012) Theoretical and numerical investigation of bending properties of Cu nanowires. Computational Materials Science, 55, pp. 73-80.

Zhao, Yanyan, Yang, Jeanne, Frost, Ray, Kristof, Janos, & Horvath, Erzsebet (2009) Synthesis, characterization and thermal analysis of Fe-doped boehmite nanofibres and nanosheets. Journal of Materials Science, 44(14), pp. 3662-3673.

Zheng Ping, Wu & Gu, YuanTong (2011) Prediction of structural integrity, robustness and service life using advanced finite element methods. International Journal of Computational Methods, 8(4), pp. 787-800.

Zhou, Yifan, Sun, Yong, Mathew, Joseph, Wolff, Rodney C., & Ma, Lin (2011) Latent degradation indicators estimation and prediction : a Monte Carlo approach. Mechanical Systems and Signal Processing, 25(1), pp. 222-236.

This list was generated on Sat Feb 11 07:32:43 2012 EST.

Export as	RSS 1.0 Atom RSS 2.0