Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > MECHANICAL ENGINEERING (091300)"

Subjects classification (32894)
- Australian and New Zealand Standard Research Classification (32894)
  - ENGINEERING (090000) (4678)
    - MECHANICAL ENGINEERING (091300) (596)
      - Acoustics and Noise Control (excl. Architectural Acoustics) (091301) (10)
      - Automation and Control Engineering (091302) (39)
      - Autonomous Vehicles (091303) (6)
      - Dynamics Vibration and Vibration Control (091304) (44)
      - Energy Generation Conversion and Storage Engineering (091305) (26)
      - Mechanical Engineering not elsewhere classified (091399) (209)
      - Microelectromechanical Systems (MEMS) (091306) (4)
      - Numerical Modelling and Mechanical Characterisation (091307) (151)
      - Solid Mechanics (091308) (17)
      - Tribology (091309) (7)

Number of items at this level: 152.

Book

Davis, Lloyd E. & Bunker, Jonathan M. (2008) Suspension testing of 3 heavy vehicles – methodology and preliminary frequency analysis. Report. State of Queensland (Department of Main Roads) & Queensland University of Technology, Brisbane, Queensland.

542

Book Chapter

Guan, Lisa (2009) Global Warming : Impact on Building Design and Performance. In Capehart, B (Ed.) Encyclopedia of Energy Engineering and Technology. Taylor & Francis , London, pp. 1-6.

Guan, Lisa & Chen, Guangnan (2012) Air Conditioning Systems : Design and Energy efficiency. In Anwar, S (Ed.) Encyclopedia of Energy Engineering and Technology. Taylor & Francis Books, London.

Saha, Suvash C. (2012) Natural convection in the attic-shaped spaces. In Acosta, Morena J. (Ed.) Advances in Energy Research. Nova Science Publishers, Inc., New York, 289-309 .

Journal Article

Adams, Michelle, Lean, Melanie, Hitchick, Nola, & Beagley, Kenneth (2005) The efficacy of propionibacterium jensenii 702 to stimulate a cell-mediated response to orally administered soluble mycobacterium tuberculosis antigens using a mouse model. Dairy Science and Technology, 85(1), pp. 75-84.

Anapayan, Tharmarajah, Mahendran, Mahen, & Mahaarachchi, Dhammika (2010) Lateral distortional buckling tests of a new hollow flange channel beam. Thin-Walled Structures, 49(1), pp. 13-25.

Aygun, Haydar, Attenborough, Keith, Lauriks, Walter, Rubini, Philip, & Langton, Christian (2011) Wave propagation in stereo-lithographical (STL) bone replicas at oblique incidence. Applied Acoustics, 72(7), pp. 458-463.

Bayissa, Wirtu & Haritos, Nicholas (2007) Structural damage identification in plates using spectral strain energy analysis. Journal of Sound and Vibration, 307(1-2), pp. 226-249.

Bayissa, Wirtu & Haritos, Nicholas (2009) Structural damage identification using a global optimization technique. International Journal of Structural Stability and Dynamics, 9(4), pp. 745-763.

Bayissa, Wirtu, Haritos, Nicholas, & Thelandersson, S. (2008) Vibration-based structural damage identification using wavelet transform. Mechanical Systems and Signal Processing, 22(5), pp. 1194-1215.

Bian, Jian, Gu, YuanTong, & Murray, Martin H. (2013) A dynamic wheel-rail impact analysis of railway track under wheel flat by Finite Element Analysis. Vehicle System Dynamics.

Bian, Jian, Gu, YuanTong, & Murray, Martin Howard (2013) Numerical study of impact forces on railway sleepers under wheel flat. Advances in Structural Engineering, 16(1), pp. 127-134.

Bodisco, Timothy A., Reeves, Robert W., Situ, Rong, & Brown, Richard J. (2011) Bayesian models for the determination of resonant frequencies in a DI diesel engine. Mechanical Systems and Signal Processing, 26, pp. 305-314.

100

Brooks, Alex, Makarenko, Alexei, & Upcroft, Ben (2008) Gaussian process models for indoor and outdoor sensor-centric robot localization. IEEE Transactions on Robotics, 24(6), pp. 1341-1351.

Chen, Gongfa, Fukuyama, Hiroshi, Teshigawara, Muki, Etoh, Hiro, Kusunoki, Kaida, & Suwada, H (2007) Numerical Simulation of Columns with Un-bonded Reinforcing Bars for Crack Control. Structural Engineering and Mechanics, 26(4), pp. 409-426.

Cheng, Charles Chor Kwan, Leung, Andrew Yee Tak, Lam, Kit Ming, Demirbilek, Nur, & Williamson, Brian J. (2010) A CFC study of Hong Kong refuge floor design : floor height effect. Engineering Applications of Computational Fluid Mechanics, 4(3), pp. 425-433.

Chuan Chai, Tan & Yarlagadda, Prasad K. (1998) An investigation into welding of engineering thermoplastics using focused microwave energy. Journal of Materials Processing Technology, 74(1-3), pp. 199-212.

De Pellegrin, Dennis, Corbin, Normand, Baldoni, Gary, & Torrance, Andrew (2009) Diamond particle shape: Its measurement and influence in abrasive wear. Tribology International, 42(1), pp. 160-168.

Dhanasekar, Manicka & Haider, W (2008) Explicit finite element analysis of lightly reinforced masonry shear walls. Computers and Structures, 86(1-2), pp. 15-26.

Dhanasekar, Manicka, Han, Jianjun, & Qin, Qinghua (2006) A hybrid-Trefftz element containing an elliptic hole. Finite Elements in Analysis and Design, 42(14-15), pp. 1314-1323.

Dixon, Terry, Mann, Anthony, Plaza, Floren, & Gilfillan, W (2005) Development of advanced technology for biomass combustion - CFD as an essential tool. Fuel: the science and technology of fuel and energy, 84(10), pp. 1303-1311.

Dolamune Kankanamge, Nirosha & Mahendran, Mahen (2010) Mechanical properties of cold-formed steels at elevated temperatures. Thin-Walled Structures, 49(1), pp. 26-44.

Farmani, Mohammad Reza, Jaamialahmadi, Abdolrahman, & Babaie, Meisam (2011) Multiobjective optimization for force and moment balance of a four-bar linkage using evolutionary algorithms. Journal of Mechanical Science and Technology, 25(12), pp. 2971-2977.

Gadomski, A, Pawlak, Zenon, & Oloyede, A. (2008) Directed ion transport as virtual cause of some facilitated friction-lubrication mechanism prevailing in articular cartilage: A hypothesis. Tribology Letters, 30(2), pp. 83-90.

Gao, Chongyang, Fang, Bin, & Gu, YuanTong (2010) Theoretical analysis of serrated chip formation based on ideal models in high speed cutting. Advanced Materials Research, 154-(155), pp. 239-245.

Geng, Li, Feng, Wei, Hutmacher, Dietmar, Wong, Yoke San, Loh, Han Tong, & Fuh, Jerry (2005) Direct writing of chitosan scaffolds using a robotic system. Rapid Prototyping Journal, 11(2), pp. 90-97.

Gibson, Ian, Savalani, Monica, Lam, Christopher, Olkowski, Radoslow, Ekaputra, A, Tan, Kim Cheng, et al. (2009) Towards a medium/high load-bearing scaffold fabrication system. Tsinghua Science and Technology, 14(1), pp. 13-19.

Gu, Y.T., Wang, W., Zhang, L.C., & Feng, X.Q. (2010) An enriched radial point interpolation method (e-RPIM) for analysis of crack tip fields. Engineering Fracture Mechanics, 78(2011), pp. 175-190.

Gu, YuanTong & Liu, Gui-Rong (2005) Meshless methods coupled with other numerical methods. Tsinghua Science and Technology, 10(1), pp. 8-15.

Gu, YuanTong & Liu, Gui-Rong (2006) Meshless techniques for convection dominated problems. Computational Mechanics, 38(2), pp. 272-283.

Gu, YuanTong & Liu, Gui-Rong (2005) A meshfree weak-strong (MWS) form method for time dependant problems. Computational Mechanics, 35(2), pp. 134-145.

Gu, YuanTong, Wang, Qingxia, & Lam, K (2007) A meshless local Kriging method for large deformation analyses. Computer Methods in Applied Mechanics and Engineering, 196(9-12), pp. 1673-1684.

Guan, Li-Shan (2011) Sensitivity of building cooling loads to future weather predictions. Architectural Science Review, 54(3), pp. 178-191.

Guan, Lisa (2011) Energy use, indoor temperature and possible adaptation strategies for air-conditioned office buildings in face of global warming. Building and Environment. (In Press)

Hasan, M.N., Saha, S., & Saha, S.C. (2011) Effects of corrugation frequency and aspect ratio on natural convection within an enclosure having sinusoidal corrugation over a heated top surface. International Communications in Heat and Mass Transfer, 39(3), pp. 368-377.

Hawari, Haitham M. & Murray, Martin H. (2009) Correlating vehicle forces and track profile. Transport Engineering in Australia, 12(1), pp. 37-48.

Heng, Soong, Tan, Andy, Mathew, Joseph, Montgomery, Neil, Banjevic, Dragan, & Jardine, Andrew (2009) Intelligent condition-based prediction of machinery reliability. Mechanical Systems & Signal Processing, 23(N/A), pp. 1600-1614.

Heng, Soong, Zhang, Sheng, Tan, Andy, & Mathew, Joseph (2009) Rotating machinery prognostics. State of the art, challenges and opportunities. Mechanical Systems and Signal Processing, 23(3), pp. 724-739.

141

Histing, T., Klein, M., Stieger, A., Stenger, D., Steck, R., Matthys, R., et al. (2012) A new model to analyze metaphyseal bone healing in mice. Journal of Surgical Research. (In Press)

Hu, Jinqiu, Zhang, Laibin, Ma, Lin, & Liang, Wei (2010) An integrated method for safety pre-warning of complex system. Safety Science, 48(5), pp. 580-597.

Karim, Azharul (2011) Experimental investigation of a stratified chilled-water thermal storage system. Applied Thermal Engineering, 31(11 - 1), pp. 1853-1860.

Karim, Azharul & Hawlader, M. (2005) Mathematical modelling and experimental investigation of tropical fruits drying. International Journal of Heat and Mass Transfer, 48(23-24), pp. 4914-4925.

Karim, Azharul & Hawlader, M. (2006) Performance evaluation of a v-groove solar air collector for drying applications. Applied Thermal Engineering, 26(1), pp. 121-130.

Karim, Azharul & Hawlader, M. (2006) Performance investigation of flat plate, v-corrugated and finned air collectors. Energy, 31(4), pp. 452-470.

Kaupp, Tobias, Douillard, Bertrand, Ramos, Fabio, Makarenko, Alexei, & Upcroft, Ben (2007) Shared environment representation for a human-robot team performing information fusion. Journal of Field Robotics, 24(11-12), pp. 911-942.

Kim, Eric, Tan, Andy, & Yang, Bo-Suk (2008) Parameter comparison of acoustic emission signals for condition monitoring of low-speed bearings. Australian Journal of Mechanical Engineering, 6(1), pp. 45-52.

Kim, Eric, Tan, Chit, Yang, Bo-Suk, Kim, Won-Cheol, Choi, Beong-Keun, & An, Young-Su (2007) Optimum Shape Design of Rotating Shaft by ESO Method. Journal of Mechanical Science and Technology, 21(7), pp. 1039-1047.

Kim, Hack, Tan, Andy, & Mathew, Joseph (2011) New machine prognostics approach based on health state probability estimation. Australian Journal of Mechanical Engineering, 8(2), pp. 79-90.

Klein, Travis J., Rizzi, Simone C., Schrobback, Karsten, Reichert, Johannes C., Jeon, June, Crawford, Ross W., et al. (2010) Long-term effects of hydrogel properties on human chondrocyte behavior. Soft Matter, 6(20), pp. 5175-5183.

Kreiser, Dean, Jia, Sheng Xiang, Han, Jianjun, & Dhanasekar, Manicka (2007) A nonlinear damage accumulation model for shakedown failure. International Journal of Fatigue, 29(8), pp. 1523-1530.

Lee, Tae-Ho, Situ, Rong, Hibiki, Takashi, Park, Hyun-Sik, Ishii, Mamoru, & Mori, Michitsugu (2009) Axial developments of interfacial area and void concentration profiles in subcooled boiling flow of water. International Journal of Heat and Mass Transfer, 52(1-2), pp. 473-487.

Li, Kuo, Yau, Man Hong, Chan, Tommy H.T., Thambiratnam, David, & Tam, Hwa Yaw (2013) Fiber Bragg grating strain modulation based on nonlinear string transverse force amplifier. Optics Letters, 38(3), pp. 311-313.

Lin, Tian Ran (2012) An analytical and experimental study of the vibration response of a clamped ribbed plate. Journal of Sound and Vibration, 331(4), pp. 902-213.

110

Lin, Tian Ran, Mechefske, Chris, & O'Shea, Peter J. (2011) Characteristics of modal sound radiation of finite cylindrical shells. Journal of Vibration and Acoustics, 133(5), 051011-1.

Liu, Gui-Rong, Zhang, Guiyong, Gu, YuanTong, & Wang, Y (2005) A meshfree radial point interpolation method (RPIM) for three-dimensional solids. Computational Mechanics, 36(6), pp. 421-430.

Madasu, Vamsi, Posinaseeti, Praveen, & Yarlagadda, Prasad (2009) Fuzzy modelling based estimation of short circuit severity in pulse gas metal arc welding. Australian Journal of Mechanical Engineering, 7(1), pp. 9-17.

Mahaarachchi, Dhammika & Mahendran, Mahen (2009) Wind uplift strength of trapezoidal steel cladding with closely spaced ribs. Journal of Wind Engineering and Industrial Aerodynamics, 97(3-4), pp. 140-150.

Morgan, Dana, Triani, Gerry, Blackford, Mark, Raftery, Tony, Frost, Ray, & Waclawik, Eric (2010) Alkaline hydrothermal kinetics in titanate nanostructure formation. Journal of Materials Science, 46(2), pp. 548-557.

Newman, Paul, Sibley, Gabe, Smith, Mike, Cummins, Mark, Harrison, Alastair, Mei, Chris, et al. (2009) Navigating, recognizing and describing urban spaces with vision and lasers. International Journal of Robotics Research, 28(11 - 1), pp. 1406-1433.

Njuguna, Michael K., Yan, Cheng, Bell, John M., & Yarlagadda, Prasad K. (2011) Static and dynamic strain sensing using a polymer : carbon nanotube film strain sensor. World Journal of Engineering, 1, pp. 871-872.

Palmer, Sara & Frost, Ray (2009) Characterisation of bauxite and seawater neutralised bauxite residue using XRD and vibrational spectroscopic techniques. Journal of Material Science, 44(1), pp. 55-63.

Pawlak, Z, Kaldonski, T, Pai, Raghuvir, Bayraktare, E, & Oloyede, A. (2009) A comparative study on the tribological behaviour of hexagonal boron nitride (h-BN) as lubricating micro-particles - An additive in porous sliding bearings for a car clutch. Wear, 267(5-8), pp. 1198-1202.

Pawlak, Z., Cartwright, P.S., Oloyede, Adekunle, & Bayraktar, E. (2010) Removal of toxic arsenic and antimony from groundwater Spiro Tunnel Bulkhead in Park City Utah using colloidal iron hydroxide : comparison with reverse ssmosis. Advanced Materials Research, 83-86, pp. 553-562.

Pawlak, Zenon, Crawford, Ross, & Oloyede, A. (2008) Hypothetical model of hydrophilic lubrication in synovial joints. Australian Journal of Mechanical Engineering, 6(1), pp. 21-26.

Pawlak, Zenon, Urbaniak, Wieslaw, & Oloyede, Adekunle (2011) The relationship between friction and wettability in aqueous environment. Wear [Proceedings of the 18th International Conference on Wear of Materials], 271(9 - 10), pp. 1745-1749.

Pawlak, Zenon, Yarlagadda, Prasad, Frost, Ray L., & Hargreaves, Douglas (2006) The mechanical strength of phosphates under friction-induced cross-linking. Journal of Achievements in Materials and Manufacturing Engineering, 17(1-2), pp. 201-204.

Ramos, Fabio, Kumar, Suresh, Upcroft, Ben, & Durrant-Whyte, Hugh (2008) A natural feature representation for unstructured environments. IEEE Transactions on Robotics, 24(6), pp. 1329-1340.

Ranawaka, R & Mahendran, Mahen (2010) Numerical modelling of light gauge cold-formed steel compression members subjected to distortional buckling at elevated temperatures. Thin-Walled Structures, 48(4-5), pp. 334-344.

Rosenberg, David, Sindhwani, Vikas, Bartlett, Peter L., & Niyogi, Partha (2009) Multiview point cloud kernels for semisupervised learning [Lecture Notes]. IEEE Signal Processing Magazine, 26(5), 145-150 .

Sadik, Amin, Hussain, Zahir, Yu, Xinghuo, & O'Shea, Peter (2007) An Approach for Stability Analysis of a Single-Bit High-Order Digital Sigma-Delta Modulator. Digital Signal Processing, 17(6), pp. 1040-1054.

Saha, Suvash C., Gu, YuanTong, Molla, Md. Mamun, Siddiqa, Sadia, & Hossain, Md. Anwar (2012) Natural convection from a vertical plate embedded in a stratified medium with uniform heat source. Desalination and Water Treatment : Science and Engineering, 44(1-3), pp. 7-14.

Schrobback, K., Malda, J., Crawford, R. W., Upton, Z., Leavesley, D. I., & Klein, T. J. (2012) Effects of oxygen on zonal marker expression in human articular chondrocytes. Tissue Engineering Part A, 18(9-10), pp. 920-933.

Sikorska, Joanna, Hodkiewicz, Melinda, & Ma, Lin (2011) Prognostic modelling options for remaining useful life estimation by industry. Mechanical Systems and Signal Processing, 25(5), pp. 1803-1836.

Singamneni, Sarat, St. George, John, Choudhury, Asimava, & Yarlagadda, Prasad (2009) Rapid casting: a critical analysis of mould and casting characteristics. Australian Journal of Mechanical Engineering, 7(1), pp. 33-43.

Sreejith, Plappillimadam & Yarlagadda, Prasad (2009) Studies of bone cell adhesion and proliferation on ion-implanted titanium discs. Australian Journal of Mechanical Engineering, 7(1), pp. 77-82.

Sugiyama, Sadahiro, Wullschleger, M.E., Wilson, K., Williams, R., & Goss, B. (2012) Reliability of clinical measurement for assessing spinal fusion: An experimental sheep study. Spine, 37(9), pp. 763-768.

Tahri, Omar, Mezouar, Youcef, Chaumette, Francois, & Corke, Peter (2010) Decoupled image-based visual servoing for cameras obeying the unified projection model. IEEE Transactions on Robotics, 26(4), p. 684.

Tan, Andy, Karimi, Mahdi, & Mathew, Joseph (2008) Blind deconvolution using the eigenvector algorithm (EVA) method for the enhancement of bearing signal through the transmission channel. Australian Journal of Mechanical Engineering, 5(2), pp. 151-156.

Thilakarathna, Herath Mudiyanselage Indika, Thambiratnam, David, Dhanasekar, Manicka, & Perera, Nimal (2010) Numerical simulation of axially loaded concrete columns under transverse impact and vulnerability assessment. International Journal of Impact Engineering, 37(11), pp. 1100-1112.

616

Tsiros, Margarita, Grimshaw, Paul, Shield, Anthony, & Buckley, Jonathan (2011) Test-retest reliability of the biodex system 4 isokinetic dynamometer for knee strength assessment in paediatric populations. Journal of Allied Health, 40(3), pp. 115-119.

Tuan, Barnabas Ho Saey & Hutmacher, Dietmar (2005) Application of micro CT and computation modeling in bone tissue engineering. Computer Aided Design, 37(11), pp. 1151-1161.

Turner, Ian, Rousset, Patrick, Remond, Romain, & Perre, Patrick (2010) An experimental and theoretical investigation of the thermal treatment of wood (Fagus sylvatica L.) in the range 200-260 °C. International Journal of Heat and Mass Transfer, 53(4), pp. 715-725.

Wang, Shi-jin, Mathew, Avin D., Chen, Yan, Xi, Li-feng, Ma, Lin, & Lee, Jay (2009) Empirical analysis of support vector machine ensemble classifiers. Expert Systems with Applications, 36(3 Pt2), pp. 6466-6476.

117

Ward, Nicholas & Steinberg, Theodore (2007) Geometry of the Melting Interface in Cylindrical Metal Rods under Microgravity Conditions. Comptes Rendus Mecanique (Academie des Sciences), 335(5-6), pp. 342-350.

Wu, Y, Lui, G, & Gu, YuanTong (2005) Application of meshless local Petrov-Galerkin (MLPG) approach to simulation of incompressible flow. Numerical Heat Transfer Part B: Fundamentals: an international journal of computation and methodology, 48(5), pp. 459-475.

Wu , Chengtie, Luo, Yongxiang, Cuniberti, Gianaurelio, Xiao, Yin, & Gelinsky, Michael (2011) Three-dimensional printing of hierarchical and tough mesoporous bioactive glass scaffolds with a controllable pore architecture, excellent mechanical strength and mineralization ability. Acta Biomaterialia, 7(6), pp. 2644-2650.

184

Xu, Xu, Gu, YuanTong, & Liu, Gui-Rong (2013) A hybrid smoothed finite element method (H-SFEM) to solid mechanics problems. International Journal of Computational Methods, 10(134001), pp. 1-17.

Yan, Cheng, Bai, R, Yarlagadda, Prasad, & Yu, Hao (2009) Fracture behaviour of microstructured silica optical fibres. Australian Journal of Mechanical Engineering, 7(1), pp. 93-98.

Yan, Cheng, Mai, Yiu-Wing, & Ye, Lin (2001) Effect of bond thickness on fracture behaviour in adhesive joints. Journal of Adhesion, 75(1), pp. 27-44.

411

Yan, Chenglin, Zou, Longjiang, Xue, Dongfeng, Xu, Jiasheng, & Liu, Meinan (2008) Chemical tuning polymorphology of functional materials by hydrothermal and solvothermal reactions. Journal of Materials Science, 43(7), pp. 2263-2269.

Yang, Hongyu, Mathew, Joseph, & Ma, Lin (2005) Fault diagnosis of rolling element bearings using basis pursuit. Mechanical Systems and Signal Processing, 19(2), pp. 341-356.

Yang, Jing, Baker, Adrian, Liu, Hongwei, Martens, Wayde, & Frost, Ray (2010) Size-controllable synthesis of chromium oxyhydroxide nanomaterials using a soft chemical hydrothermal route. Journal of Materials Science, 45(24), pp. 6574-6585.

Yarlagadda, Prasad, Posinaseeti, Praveen, Madasu, Vamsi, & Rhee, Sehun (2007) Detection of Short Circuit in Pulse Gas Metal Arc Welding Process. Journal of Achievements in Materials and Manufacturing Engineering, 24(1), pp. 328-332.

Ye, Xin, Pendyala, Ram, Washington, Simon, Konduri, Karthik, & Oh, Jutaek (2009) A simultaneous equations model of crash frequency by collision type for rural intersections. Safety Science, 47(3), pp. 443-452.

Zhan, Haifei & Gu, YuanTong (2012) Theoretical and numerical investigation of bending properties of Cu nanowires. Computational Materials Science, 55, pp. 73-80.

Zhan, Haifei, Gu, YuanTong, & Park, Harold S. (2012) Beat phenomena in metal nanowires, and their implications for resonance-based elastic property measurements. Nanoscale, 4(21), pp. 6779-6785.

Zhao, Yanyan, Yang, Jeanne, Frost, Ray, Kristof, Janos, & Horvath, Erzsebet (2009) Synthesis, characterization and thermal analysis of Fe-doped boehmite nanofibres and nanosheets. Journal of Materials Science, 44(14), pp. 3662-3673.

Zheng Ping, Wu & Gu, YuanTong (2011) Prediction of structural integrity, robustness and service life using advanced finite element methods. International Journal of Computational Methods, 8(4), pp. 787-800.

Zhou, Yifan, Sun, Yong, Mathew, Joseph, Wolff, Rodney C., & Ma, Lin (2011) Latent degradation indicators estimation and prediction : a Monte Carlo approach. Mechanical Systems and Signal Processing, 25(1), pp. 222-236.

Conference Paper

Bian, Jian, Murray, Martin H., & Gu, YuanTong (2012) A non-linear dynamic analysis of heavy haul track line sleepers under wheel flat. In Conference on Railway Engineering CORE2012, Brisbane Convention and Exhibition Centre, Brisbane, Australia.

Bodisco, Timothy A. & Brown, Richard J. (2010) Statistical modeling to determine resonant frequency information present in combustion chamber pressure signals. In Mallinson, G.D. & Cater, J.E. (Eds.) Proceedings of the 17th Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, University of Auckland, pp. 1-4.

140

Crawford, Shane, Murray, Martin H., & Powell, John (2001) Development of a Mechanistic Model for the Determination of Track Modulus. In 7th International Heavy Haul Conference, 10-14 June 2001, Brisbane, Australia.

1,782

Hargreaves, Douglas, Ma, Lin, Stapelberg, Rudolph, Wiliem, Leonard, & Yarlagadda, Prasad (2006) A Real-Time Lossless Compressing Algorithm for Real-Time Condition Monitoring System. In Kumar, U, Parida, A, & Rao, R (Eds.) Condition Monitoring and Diagnostic Engineering Management: Proceedings of the 19th International Congress, 12 - 15 June 2006, Sweden, Lulea.

Hasan, Muhammad Noman, Saha, Suvash C., & Gu, YuanTong (2011) Effect of differentially heating and consequent transient behaviour for natural convection within an enclosure of sinusoidal corrugated side walls. In Proceedings of the International Conference on Mechanical Engineering 2011, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh.

Kang, Bong-Yong, Kang, Mun-Jin, Posinasetti, Praveen, & Yarlagadda, Prasad (2006) Influence of Pulsing Parameters on Metal Transfer Mode in Pulse Gas Metal Arc Welding of Aluminium. In Mehta, B (Ed.) Proceedings of Advances in Materials and Processing Technologies (AMPT) 2006, 30 July - 3 August 2006, United States of America, Nevada, Las Vegas.

Kaphle, Manindra R. & Tan, Andy (2009) Source location of acoustic emission waves for structural health monitoring of bridges. In Jaiswal, Sumeet & Wang, Liang (Eds.) Infrastructure Research Theme Postgraduate Student Conference 2009 : Rethinking Sustainable Development : Planning, Engineering, Design and Managing Urban Infrastructure, 26 March 2009, QUT, Brisbane.

355

Kaphle, Manindra R., Tan, Andy, Thambiratnam, David, & Chan, Tommy H.T. (2011) A study on the use of acoustic emission technique as a structural health monitoring tool. In 5th World Congress on Engineering Asset Management (WCEAM 2010), 25-27 October 2010, Brisbane Convention and Exhibition Centre.

Kim, Eric, Tan, Andy, & Mathew, Joseph (2011) Integrated approach for HP-LNG pump diagnosis and prognostics based on health state probability estimation. In The 5th World Congress on Engineering Asset Management (WCEAM 2010), 25-27 October 2010, Brisbane Convention and Exhibition Centre, Brisbane, Qld.

Kim, Eric, Tan, Andy, & Yang, Bo-Suk (2011) Acoustic emission for diesel engine monitoring: A review and preliminary. In The 5th World Congress on Engineering Asset Management (WCEAM 2010), 25-27 October 2010, Brisbane Convention and Exhibition Centre, Brisbane, Qld.

Kosse, Vladis & De Pellegrin, Dennis (2011) Teaching motor racing engineering through real-life projects: benefits and challenges. In Uhomoibhi, James (Ed.) Proceedings of the 17th International Conference on Engineering Education: Engineering Sustainability for a Global Economy, ICEE-2011, Belfast, Northern Ireland, UK, pp. 1-7.

Kosse, Vladis & De Pellegrin, Dennis (2011) Teaching tribology and maintenance-related subjects : a hands-on focus. In Uhomoibhi, James (Ed.) Proceedings of the 17th International Conference on Engineering Education: Engineering Sustainability for a Global Economy, ICEE-2011, Northern Ireland, Belfast, pp. 1-8.

112

Kumar, Chandan, Karim, Azharul, Joardder, Mohammad Uzzal Hossain, & Miller, Graeme (2012) Modeling heat and mass transfer process during convection drying of fruit. In The 4th International Conference on Computational Methods (ICCM2012), Crowne Plaza, Gold Coast, Australia.

157

Kumar, Chandan, Razzaque , Muhammed Mahbubur, & Das, Debabrata (2009) Analysis of a negatively buoyant jet. In International Conference on Mechanical Engineering ICME2009, 26-28th December, 2009, Dhaka, Bangladesh.

Lin, Tian Ran & Pan, Jie (2006) Vibration localization of finite plates with disordered and irregular rib spacing. In Inter-Noise 2006, 2-6 December 2006, Hawaii, USA.

Lin, Tian Ran & Tan, Andy (2011) Characterizing the signal pattern of a four-cylinder diesel engine using acoustic emission and vibration analysis. In Shen, Gongtian & Wu, Zhanwen (Eds.) Proceedings of World Conference on Acoustic Emission -2011, Chinese Society for Non-destructive Testing, Beijing International Convention Center, Beijing, pp. 506-515.

269

Lin, Tian Ran, Tan, Andy C. C., Ma, Lin, & Mathew, Joseph (2011) Estimating the loading condition of a diesel engine using instantaneous angular speed analysis. In Lee, Jay (Ed.) Proceedings of the 6th World Congress on Engineering Asset Management, Springer, Duke Energy Center, Cincinatti, Ohio. (In Press)

260

Lin, Tian Ran, Tan, Andy C. C., & Mathew, Joseph (2011) Condition monitoring and diagnosis of injector faults in a diesel engine using in-cylinder pressure and acoustic emission techniques. In Law, S.S., Cheng, Li, Xia, Yong, & Su, Zhongqing (Eds.) Dyanmics for Sustainable Engineering, The HongKong Polytechnic University, Hong Kong Polytechnic University, pp. 454-463.

166

Liu, Xiaofeng, Ma, Lin, & Mathew, Joseph (2007) Rotating machinery fault diagnosis based on fuzzy data fusion techniques. In 2nd World Congress on Engineering Asset Management and the 4th International Conference on Condition Monitoring, 11-14 June 2007, Harrogate, England.

592

Liu, Xiaofeng, Ma, Lin, Zhang, Sheng, & Mathew, Joseph (2006) Feature group optimization for machinery fault diagnosis based on fuzzy measures. In Mathew, Joseph, Ma, Lin, Tan, Andy, & Anderson, Deryk (Eds.) 1st World Congress on Engineering Asset Management, 11-14 July 2006, Gold Coast, Australia.

303

Liu, Xiaofeng, Ma, Lin, Zhang, Sheng, & Mathew, Joseph (2005) Machinery fault diagnosis schemas based on fuzzy integral theory. In International Conference on Condition Monitoring, 18-21 July 2005, Cambridge, England.

425

Liu, Xiaofeng, Ma, Lin, Zhang, Sheng, & Mathew, Joseph (2005) Using fuzzy c-means and fuzzy integrals for machinery fault diagnosis. In International Conference on Condition Monitoring, 18-21 July 2005, Cambridge, England.

584

Lowe, David, Tan, Andy, & Brown, Richard J. (2010) Diesel engine condition monitoring and simulated diesel knock. In Teh, Kian, Davies, Ian, & Howard, Ian (Eds.) Proceedings of the 6th Australasian Congress on Applied Mechanics, Engineers Australia, Perth, WA, pp. 704-713.

Lowe, David, Wu, Weiliang, & Tan, Andy (2011) Experimentally induced diesel engine injector faults and some preliminary acoustic emission signal observations. In World Congress on Engineering Asset Management, 3-5 October 2011, Cincinnati, USA. (In Press)

449

Lynn, David Benjamin, Plagens, Owen, Castillo, Martin, Paulos, Todd, & Steinberg, Ted (2010) The increased flammability of metallic materials burning in reduced gravity. In Proceedings of the 4th International Association for the Advancement of Space Safety Conference : Making Safety Matter, International Association for the Advancement of Space Safety, Braun Center, Huntsville, Alabama.

Mar, Nang S.S., Fookes, Clinton B., & Yarlagadda, Prasad K. (2012) Solder joint defects classification using the Log-Gabor Filter, the Discrete Wavelet Transform and the Discrete Cosine Transform. In International Conference on Advances in Mechanical and Building, 9-11 January 2012, Tamil Nadu, India.

Mathew, Avin D., Purser, Michael, Ma, Lin, & Barlow, Matthew (2010) Open standards-based system integration for asset management decision support. In Kiritsis, Dimitris, Emmanouilidis, Christos, Koronios, Andy, & Mathew, Joseph (Eds.) Proceedings of the Fourth World Congress on Engineering Asset Management (WCEAM) 2009, Springer-Verlag London Limited, Athens, Greece, pp. 221-229.

650

Najafi, Massieh, Auslander, David M., Bartlett, Peter L., & Haves, Philip (2008) Application of machine learning in fault diagnostics of mechanical systems. In Proceedings of the World Congress on Engineering and Computer Science 2008: International Conference on Modeling, Simulation and Control 2008, International Association of Engineers, San Fransisco, pp. 957-962.

Ranjan, V., Pai, R., & Hargreaves, D. (2006) Stiffness and damping coefficients of 3-axial groove water lubricated bearing using perturbation technique. In 5th EDF and LMS Poitiers Workshop 'Bearing Behaviour Under Unusual Operating Conditions', Futurescope, 5th October 2006.

Roy, Aditi, Tan, Andy, Gu, YuanTong, & Kaphle, Manindra R. (2011) Simulation of AE wave propagation in thin plate for source identification. In The 5th World Congress on Engineering Asset Management (WCEAM 2010), 25-27 October 2010, Brisbane Convention and Exhibition Centre, Brisbane, Qld.

Saha, Suvash C., Gu, YuanTong, & Hossain, Md. Anwar (2011) Free convection heat transfer through coupled thermal boundary layers in a partitioned triangular enclosure. In Proceedings of the International Conference on Mechanical Engineering 2011, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh.

Saha, Suvash C. & Hasan, Muhammad Noman (2011) Mixed convection laminar flow along a horizontal plate subject to streamwise sinusoidal surface temperature. In Proceedings of the International Conference on Mechanical Engineering 2011, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh.

Shinde, Jagdish Shivaji, Ma, Lin, & Karim, Azharul (2011) Integrated Acquisition Engineering Model for acquiring heavy engineering assets. In Singh, Manish, Rao, Raj B.K.N., & Liyanage, J.P. (Eds.) Integrated Acquisition Engineering Model for acquiring heavy engineering assets, COMADEM International, Clarion Hotel, Stavanger, Norway, pp. 1625-1631.

Siegenthaler, Alfred & Madhani, Jehangir T. (1998) Experimental Verification of Departure from-Rankine- Hugoniot Behaviour in Weak Mach Reflection. In 13th Australasian Fluid Mechanics Conference, 13-18 December 1998, Monash University, Melbourne, Australia.

507

Situ, Rong, Brown, Richard J., Ristovski, Zoran, Kruger, Uli, & Hargreaves, Douglas J. (2008) Analysis of dual fuel compression ignition (diesel) engine. In Masataka, Arai & Daisho, Yasuhiro (Eds.) The Seventh International Conference on Modeling and Diagnostics for Advanced Engine Systems, 28-31 July 2008, Sapporo, Japan.

866

Wiliem, Arnold, Madasu, Vamsi, Boles, Wageeh W., & Yarlagadda, Prasad K. (2012) A Context Space Model for Detecting Anomalous Behaviour in Video Surveillance. In International Conference on Information Technology 2012 (ICIT12), 16-18 April 2012, Las Vegas, Nevada, USA.

125

Wilson, Lance J., Hargreaves, Douglas J., Clegg, Richard E., & Powell, John (2008) Methodology for measurement of lubricant decay rate for rail lubricants. In NORDTRIB 2008 : 13th Nordic Symposium on Tribology, 10-13 June 2008, Tampere, Finland. (Unpublished)

319

Wu, Weiliang, Lowe, David, & Tan, Andy (2011) A study on acoustic emission signal propagation of a small size multi-cylinder diesel engine. In Lee, Jay (Ed.) Proceedings of the Sixth World Congress on Engineering Asset Management WCEAM 2011, WCEAM, United States of America, Ohio, Cincinatti, pp. 1-12.

Wu, Weiliang, Tan, Andy, & Kim, Eric (2010) Enhancing acoustic emission signals from multi-cylinder diesel engine. In 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 December 2010, Perth, Western Australia. (In Press)

156

Wu, William & Tan, Andy (2011) Separation of acoustic emission signals from small size multi-cylinder diesel engine. In The 6th World Congress on Engineering Asset Management, October 2-4, 2011, Duke Energy Convention Center, Cincinnati, OH.

Yang, Hongyu, Mathew, Joseph, & Ma, Lin (2002) Intelligent diagnosis of rotating machinery faults - A review. In 3rd Asia-Pacific Conference on Systems Integrity and Maintenance, ACSIM 2002, 25-27 September 2002, Cairns, Australia.

2,327

Yang, Hongyu, Mathew, Joseph, & Ma, Lin (2003) Vibration feature extraction techniques for fault diagnosis of rotating machinery : a literature survey. In Asia-Pacific Vibration Conference, 12-14 November 2003, Gold Coast, Australia.

1,416

Yang, Hongyu, Mathew, Joseph, Ma, Lin, & Kosse, Vladis (2004) Matching pursuit feature based neural network pattern recognition of ball bearing faults. In International Conference of Maintenance Societies 2004, 25-28 May 2004, Sydney, Australia.

442

Yeo, D.J., Choi, M.S., & Tan, A. (2011) Analysis of conical-cylinder shells fundamental characteristics for structural health diagnostics. In The 5th World Congress on Engineering Asset Management (WCEAM 2010), 25-27 October 2010, Brisbane Convention and Exhibition Centre, Brisbane, Qld.

Yu, Yi, Sun, Yong, & Gu, YuanTong (2011) Handling incomplete data in survival analysis with multiple covariates. In The 5th World Congress on Engineering Asset Management (WCEAM 2010), 25-27 October 2010, Brisbane Convention and Exhibition Centre, Brisbane, Qld.

Yuan, Huan, Steinberg, Theodore, Gu, YuanTong, & Xiao, Yin (2012) Morphology-based model for predicting osteocyte-like cell line (MLO-Y4) growth process. In Gu, YuanTong & Saha, Suvash C. (Eds.) 4th International Conference on Computational Methods (ICCM 2012), 25-28 November 2012, Crowne Plaza, Gold Coast, QLD.

Zhan, Haifei, Gu, YuanTong, Yarlagadda, Prasad K., & Yan, Cheng (2012) Influence of pre-exsiting surface defects on the vibrational properties of Ag nanowires. In 12th International Conference on Nanotechnology (IEEE NANO 2012), 20-23 August 2012, International Convention Centre, Birmingham.

Conference Item

Saha, Suvash C. (2007) Natural convection of a side heated square cavity with wavy hot surface. In 8th Biennial Engineering Mathematics & Applications Conference (EMAC 2007), 1 - 4 July 2007, University of Tasmania, Sandy Bay, Hobart. (Unpublished)

Saha, Suvash C. & Gu, YuanTong (2011) Free convection in a triangular enclosure with fluid-saturated porous medium and internal heat generation. In 10th Engineering Mathematics and Applications Conference, 4th - 7th December 2011, University of Technology Sydney,Sydney. (Unpublished)

Saha, Suvash C. & Gu, YuanTong (2011) Natural convection in a triangular enclosure due to non-uniform cooling on top. In 10th Engineering Mathematics and Applications Conference, 4th - 7th December 2011, University of Technology, Sydney, Sydney, N.S.W.. (Unpublished)

Saha, Suvash C. & Gu, YuanTong (2011) Prandtl number scaling of natural convection of an inclined flat plate due to uniform surface heat flux. In 10th Engineering Mathematics and Applications Conference (EMAC 2011), 4th - 7th December 2011, University of Technology Sydney, Sydney, NSW. (Unpublished)

Thesis

Saha, Suvash C. (2009) Natural convection adjacent to an inclined flat plate and in an attic space under various thermal forcing conditions. PhD thesis, School of Engineering and Physical Sciences.

This list was generated on Sat May 25 09:20:40 2013 EST.

Export as	RSS 1.0 Atom RSS 2.0