# Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > MECHANICAL ENGINEERING (091300) > Numerical Modelling and Mechanical Characterisation (091307)"

Up a level |

- Subjects classification (40102)
- Australian and New Zealand Standard Research Classification (40102)
- ENGINEERING (090000) (5576)
- MECHANICAL ENGINEERING (091300) (747)
**Numerical Modelling and Mechanical Characterisation (091307)**(238)

- MECHANICAL ENGINEERING (091300) (747)

- ENGINEERING (090000) (5576)

- Australian and New Zealand Standard Research Classification (40102)

Group by: Authors/Creators | Item Type

Number of items at this level:

**238**.## A

Abbasi, Waqas Sarwar, Islam, Shams-Ul, Saha, Suvash C., Gu, YuanTong, & Ying, Zhou Chao (2014) Effect of Reynolds numbers on flow past four square cylinders in an in-line square configuration for different gap spacings.

*Journal of Mechanical Science and Technology*,*28*(2), pp. 539-552. 7

Alamusi,, Hu, Ning, Jia, Bi, Arai, Masahiro, Yan, Cheng, Li, Jinhua, et al. (2012) Prediction of thermal expansion properties of carbon nanotubes using molecular dynamics simulations.

*Computational Materials Science*,*54*, pp. 249-254. 4

16

4

Alamusi, Affa, Hu, Ning, Qiu, Jianhui, Li, Yuan, Chang, Christiana, Atobe, Satoshi, et al. (2013) Multi-scale numerical simulations of thermal expansion properties of CNT-reinforced nanocomposites.

*Nanoscale Research Letters*,*8*(15). 91

2

Alexander, Thomas, Wischniewski, Sascha, & Paul, Gunther (2012) Internationale perspektiven zur anwendung zukuenftiger digitaler menschmodelle. In

*Tagungsband zum Symposium "Digitale Ergonomie - Trends für den Einsatz digitaler Menschmodelle"*, Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, Dortmund, Germany, pp. 59-74.## B

Babaie, M., Talebizadeh, P., Saha, Suvash C., Rahimzadeh, H., Zare, Firuz, & Brown, Richard J. (2012) Residence time investigation in a co-axial dielectric barrier discharge reactor. In Gu, YuanTong, Saha, Suvash C., & Liu, Gui-Rong (Eds.)

*Proceedings of the 4th International Conference on Computational Methods (ICCM2012)*, Crowne Plaza, Gold Coast, Australia. 165

Bednarz, Tomasz P., Lin, Wenxian, & Saha, Suvash C. (2010) Scaling of thermo-magnetic convection. In

*Proceedings of the 13th Asian Congress of Fluid Mechanics*, Engineers Institute of Bangladesh, Dhaka, Bangladesh, pp. 798-800. 22

Bhowmick, Sidhartha, Molla, Md. Mamun, & Saha, Suvash (2013) Non-Newtonian natural convection flow along an isothermal horizontal circular cylinder using modified power-law model.

*American Journal of Fluid Dynamics*,*3*(2), pp. 20-30. 108

## C

Chen, Yikai, He, Jie, King, Mark J., Chen, Wu-wei, & Zhang, Wei-hua (2014) Stiffness-damping matching method of an ECAS system based on LQG control.

*Journal of Central South University*,*21*(1), pp. 439-446.Chia, Kok-Seng, Liu, Xuemei, Liew , Jat-Yuen Richard, & Zhang, Min-Hong (2014) Experimental study on creep and shrinkage of high-performance ultra-lightweight cement composite of 60 MPa.

*Structural Engineering and Mechanics*,*50*(5), pp. 635-652. 72

Chintala, G.V., Gudimetla, P., Thiyahuddin, I., & Izzat, M. (2010) Reverse engineering and finite element analysis of a 3-wheeler automotive structure. In Satyanarayana, Beela & Ramji, Koona (Eds.)

*Proceedings of the Third International and Twenty-fourth All India Manufacturing Technology, Design and Research Conference - Global Trends and Challenges in Design and Manufacturing*, AUCE (A), Visakhapatnam, India, Andhra University, Visakhapatnam, India.Cui, Yuhong, Wang, Juan, Dhanasekar, Manicka, & Qin, Qinghua (2007) Mode III fracture analysis by Trefftz boundary element method.

*Acta Mechanica Sinica*,*23*(2), pp. 173-181. 4

4

## D

De Pellegrin, Dennis (2014) Benefits and risks of large hydrostatic recesses in hydroelectric turbine thrust bearings. In

*LUBMAT 2014*, 25-27 June 2014, Manchester, UK. 8

Dhanasekar, Manicka & Han, Jianjun (2006) Fracture analysis of internally cracked railheads.

*International Journal of Mechanics and Solids*,*1*(1), pp. 26-31.Dhanasekar, Manicka, Han, Jianjun, & Qin, Qinghua (2007) Interaction of surface and internal cracks in railhead.

*Computer Assisted Mechanics and Engineering Sciences*,*14*(1), pp. 79-89. 1

Ding, Kan & Dhanasekar, Manicka (2007) Flexural behaviour of bonded-bolted butt joints due to bolt looseness.

*Advances in Engineering Software: including computing systems in engineering*,*38*(8-9), pp. 598-606. 11

6

## E

El-Atm, Billy, Kelson, Neil A., & Gudimetla, Prasad V. (2008) A finite element analysis of the hydrodynamic performance of 3- and 4-Fin surfboard configurations. In Yarlagadda, Prasad K. & Gudimetla, Prasad V. (Eds.)

*9th Global Congress on Manufacturing & Management*, 12-14 November 2008, Gold Coast, Australia. 2,134

## F

Feng, XiQiao, Li, Yue, Cao, Yan-Ping, Yu, Shou-Wen, & Gu, YuanTong (2010) Design methods of rhombic tensegrity structures.

*Acta Mechanica Sinica*,*26*(4), pp. 559-565. 5

5

Fu, Qiang, Zhan, Haifei, & Gu, YuanTong (2012) Atomistic investigations of single-crystal silicon with pre-existing defects.

*Advanced Science Letters*,*14*(1), pp. 165-170.## G

Galpaya, Dilini, Wang, Mingchao, Yan, Cheng, Liu, Meinan, Motta, Nunzio, & Waclawik, Eric R. (2013) Fabrication and characterisation of graphene oxide-epoxy nanocomposite. In

*Fourth International Conference on Smart Materials and Nanotechnology in Engineering [Proceedings of SPIE, 8793]*, SPIE - Society of Photo-Optical Instrumentation Engineers , Gold Coast, Qld, pp. 1-7. 424

Glassock, Richard R., Hung, Jane Y., Gonzalez, Luis F., & Walker, Rodney A. (2009) Multimodal hybrid powerplant for unmanned aerial systems (UAS) robotics. In

*Twenty-Fourth Bristol International Unmanned Air Vehicle Systems Conference*, March 30th to April 1st 2009, Bristol United Kingdom. 839

Gover, Rory, Gu, YuanTong, Gudimetla, Prasad, & Thambiratnam, David (2008) Impact characteristics of a flexible road barrier and vehicle crash response. In Aravinthan, T, Karunasena, W, & Wang, H (Eds.)

*Futures in Mechanics of Structures and Materials: Proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20)*, 2 - 5 December 2008, Australia, Queensland, Toowoomba.Gover, Rory B. & Prasad, Gudimetla (2009) The role of HPC facilies in development of a novel road safety barrier. In

*Early Adopters PhD Workshop*. (Unpublished)Gu, YuanTong (2005) Meshfree methods and their comparisons.

*International Journal of Computational Methods (IJCM)*,*2*(4), pp. 477-515. 37

Gu, YuanTong (2010) Meshless TL and UL approaches for large deformation analysis.

*Advanced Materials Research*,*139 -*(141), pp. 893-896.Gu, YuanTong (2010) An adaptive local meshfree updated Lagrangian approach for large deformation analysis of metal forming.

*Advanced Materials Research*,*97-101*, pp. 2664-2667. 359

2

2

Gu, YuanTong (2010) An advanced implicit meshless approach for fractional partial differential equation in computational mechanics. In Howard, Ian, Teh, Kian, & Davies, Ian (Eds.)

*Proceedings from the 6th Australasian Congress on Applied Mechanics*, Engineers Australia, Perth Convention Exhibition Centre, Perth, WA, pp. 1-8.Gu, YuanTong (2008) An elasto-plastic analysis of solids by the local meshless method based on MLS.

*International Journal of Modern Physics B*,*22*(31/32), pp. 5780-5786. 277

Gu, YuanTong (2011) An enriched radial point interpolation method based on weak-form and strong-form.

*Mechanics of Advanced Materials and Structures*,*18*(8), pp. 578-584. 2

2

Gu, YuanTong & Liu, Gui-Rong (2005) Meshless methods coupled with other numerical methods.

*Tsinghua Science and Technology*,*10*(1), pp. 8-15. 13

Gu, YuanTong & Liu, Gui-Rong (2006) Meshless techniques for convection dominated problems.

*Computational Mechanics*,*38*(2), pp. 272-283. 34

27

Gu, YuanTong & Liu, Gui-Rong (2005) A meshfree weak-strong (MWS) form method for time dependant problems.

*Computational Mechanics*,*35*(2), pp. 134-145. 16

16

Gu, YuanTong & Tan, Andy (2009) Dynamics deflection analysis of nanoelectromechanical switches based on carbon nanotubes. In

*Proceedings of the 13th Asia-Pacific Vibration Conference*, University of Canterbury, University of Canterbury, Christchurch, New Zealand, pp. 1-7.Gu, YuanTong, Wang, Qingxia, & Lam, K (2007) A meshless local Kriging method for large deformation analyses.

*Computer Methods in Applied Mechanics and Engineering*,*196*(9-12), pp. 1673-1684. 39

33

Gu, YuanTong, Wang, Wenlong, Zhang, L.C., & Feng, X.Q. (2010) An enriched radial point interpolation method (e-RPIM) for analysis of crack tip fields. In Lu, Jane Wei-Zhen, Leung, Andrew Yee Tak, Lu, Vai Pan, & Mok, Kai Meng (Eds.)

*Proceedings of the 2nd International Symposium on Computational Mechanics and the 12th International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science*, AIP - American Institute of Physics , Hong Kong, Macau, China , pp. 348-353.Gu, YuanTong, Yan, Cheng, & Yarlagadda, Prasad (2009) An advanced meshless technique for large deformation analysis of metal forming.

*Australian Journal of Mechanical Engineering*,*7*(1), pp. 25-32.Gu, YuanTong & Yarlagadda, Prasad K. (2009) A bridging transition technique for the combination of meshfree method with finite element method in 2D solids and structures.

*Computational Mechanics*,*44*, pp. 119-131. 189

1

1

Gu, YuanTong & Yarlagadda, Prasad K. (2010) A coupled meshless technique/molecular dynamics approach for deformation characterization of monocrystalline metal. In Lu, Jane Wei-Zhen, Leung, Andrew Yee Tak, Lu, Vai Pan, & Mok, Kai Meng (Eds.)

*Proceedings of the 2nd International Symposium on Computational Mechanics and the 12th International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science*, American Institute of Physics, Hong Kong and Macau, China, pp. 354-359.Gu, YuanTong & Zhan, Haifei (2012) MD investigations for mechanical properties of copper nanowires with and without surface defects.

*International Journal of Computational Methods*,*9*(1), pp. 1-8. 210

2

1

Gu, YuanTong & Zhan, Haifei (2013) Numerical Characterization of Nanowires. In Li, Shaofan & Gao, Xin-Lin (Eds.)

*Handbook of Micromechanics and Nanomechanics.*Pan Stanford Publishing, USA, pp. 869-916.Gu, YuanTong, Zhan, Haifei, & Xu, Xu (2012) Numerical investigation of mechanical properties of nanowires : a review.

*Interaction and Multiscale Mechanics*,*5*(2), pp. 115-129.Gu, YuanTong & Zhang, Liangchi (2006) Deformation characterization of a nanoelectromechanical switch.

*Journal of Physics*,*34*(1), pp. 118-123. 1

1

Gu, YuanTong & Zhang, Liangchi (2007) A New Method for Stress and Deformation Analysis from Nano to Macro Dimensional Scales.

*Key Engineering Materials*,*340-34*, pp. 955-960. 2

2

Gu, YuanTong & Zhang, Liangchi (2006) A simple method for analysing the deformation of nanoelectromechanical switches based on carbon nanotubes.

*International Journal of Nanomanufacturing*,*1*(2), pp. 210-222.Gu, YuanTong & Zhuang, Pinghui (2012) Anomalous subdiffusion equations by the meshless collocation method.

*Australian Journal of Mechanical Engineering*,*10*(1), pp. 1-8. 1

Gu, YuanTong, Zhuang, Pinghui, & Liu, Fawang (2010) An advanced implicit meshless approach for the non-linear anomalous subdiffusion equation.

*Computer Modeling in Engineering & Sciences*,*56*(3), pp. 303-334. 229

20

18

Gu, YuanTong, Zhuang, Pinghui, & Liu, QingXia (2011) An advanced meshless method for time fractional diffusion equation.

*International Journal of Computational Methods*,*8*(4), pp. 653-665. 223

6

6

Gudimetla, Prasad, Kharidi, Aprameya, & Yarlagadda, Prasad, K.D.V. (2009) Simulation of delaminations in composite laminates. In

*Proceedings of the 6th International Conference on Precision, Meso, Micro and Nano Engineering*, Coimbatore, India. 588

Gudimetla, Prasad, Thiyahuddin, Izzat, & Yarlagadda, Prasad K. (2010) Geometric and force relationships for the development of a scaled model hydraulic excavator. In Satyanarayana, Beela & Ramji, Koona (Eds.)

*Proceedings of the Third International and Twenty-fourth All India Manufacturing Technology, Design and Research Conference - Global Trends and Challenges in Design and Manufacturing*, AUCE (A), Visakhapatnam, India, Andhra University, Visakhapatnam, India, pp. 499-504.Gudimetla, Prasad V., Kelson, Neil A., & El-Atm, Billy (2009) Analysis of the hydrodynamic performance of three- and four-fin surfboards using computational fluid dynamics.

*Australian Journal of Mechanical Engineering*,*7*(1), pp. 61-67.## H

Hasan, Muhammad N., Saha, Suvash C., & Gu, YuanTong (2012) Unsteady natural convection within a differentially heated enclosure of sinusoidal corrugated side walls.

*International Journal of Heat and Mass Transfer*,*55*(21-22), pp. 5696-5708. 179

1

3

Hasan, Muhammad Noman, Saha, Suvash C., & Gu, YuanTong (2013) Mixed convection over a horizontal plate with streamwise non-uniform surface temperature distribution.

*Journal of Heat Transfer*,*135*(7), 072501.He, Jie, Chen, Yikai, Zhao, Chihang, Qi, Zhiguo, & Ren, Xiuhuan (2011) Heavy truck suspension optimization based on modified skyhook damping control.

*International Journal of Heavy Vehicle Systems*,*18*(2), pp. 161-178. 1

Heidarkhan Tehrani, A., Singh, S., Jaiprakash, A., & Oloyede, A. (2014) Correlating flow induced shear stress and chondrocytes activity in micro-porous scaffold using computational fluid dynamics and rapid prototyping. In

*ASBTE 23rd Annual Conference of the Australian Society for Biomaterials and Tissue Engineering*, 22-24 April 2014, Mantra Resort Lorne, Victoria, Australia.. (In Press) 36

Heidarkhan Tehrani, Ashkan, Singh, Sanjleena, & Oloyede, Adekunle (2014) Local stress-strain distribution and load transfer across cartilage matrix at micro-scale using combined microscopy-based finite element method. In

*23rd Annual Conference of the Australasian Society of Biomaterials and Tissue Engineering*, 22-24 April 2014, Mantra Resort Lorne, VIC. 47

Helambage, Chaminda, Senadeera, Wijitha, Gu, YuanTong, & Brown, Richard J. (2012) A particle-based micromechanics approach to simulate structural changes of plant cells during drying. In Gu, YuanTong & Saha, Suvash C. (Eds.)

*Proceedings of 4th International Conference on Computational Methods (ICCM 2012)*, Crowne Plaza, Gold Coast, Australia. 120

Helambage, Chaminda, Senadeera, Wijitha W., Brown, Richard J., & Gu, YuanTong (2014) Simulation of plant cell shrinkage during drying : A SPH–DEM approach.

*Engineering Analysis with Boundary Elements*,*44*, pp. 1-18. 1

Helambage, Chaminda Prasad Karunasena, Brown, Richard J., Gu, YuanTong, & Senadeera, Wijitha (2015) Application of meshfree methods to numerically simulate microscale deformations of different plant food materials during drying.

*Journal of Food Engineering*,*146*, pp. 209-226.Helambage, Chaminda Prasad Karunasena, Hesami, Parva, Senadeera, Wijitha, Gu, YuanTong, Brown, Richard J., & Oloyede, Adekunle (2014) Scanning electron microscopic study of microstructure of Gala apples during hot air drying.

*Drying Technology : An International Journal*,*32*(4), pp. 455-468. 2

Helambage, Chaminda Prasad Karunasena, Senadeera, Wijitha, Brown, Richard J., & Gu, YuanTong (2014) A novel approach for numerical simulation of plant tissue shrinkage during drying. In Thilakarathne, B.M.K.S., Rathnayake, H.M.A.P., Champa, W.A.H., & Wasala, W.M.C.B. (Eds.)

*Proceedings of the International Research Symposium on Postharvest Technology*, Research and Development Centre, Institute of Post Harvest Technology, Anuradapura, Sri-Lanka, pp. 130-135. 12

Helambage, Chaminda Prasad Karunasena, Senadeera, Wijitha, Brown, Richard J., & Gu, YuanTong (2014) A particle based model to simulate microscale morphological changes of plant tissues during drying.

*Soft Matter*,*10*(29), pp. 5249-5268. 1

1

Helambage, Chaminda Prasad Karunasena, Senadeera, Wijitha, Gu, YuanTong, & Brown, Richard J. (2012) A coupled SPH-DEM model for fluid and solid mechanics of apple parenchyma cells during drying. In Brandner, P.A. & Pearce, B.W. (Eds.)

*Proceedings of the Eighteenth Australasian Fluid Mechanics Conference*, Australasian Fluid Mechanics Society, University of Tasmania, Launceston, TAS. 207

Helambage, Chaminda Prasad Karunasena, Senadeera, Wijitha, Gu, YuanTong, & Brown, Richard J. (2014) A coupled SPH-DEM model for micro-scale structural deformations of plant cells during drying.

*Applied Mathematical Modelling*,*38*(15-16), pp. 3781-3801. 1

Helambage, Chaminda Prasad Karunasena, Senadeera, Wijitha, Gu, YuanTong, & Brown, Richard J. (2012) A meshfree particle based model for microscale shrinkage mechanisms of food materials in drying conditions. In Goscinski, Wojtek James (Ed.)

*Doctoral Showcase - Early Research Showcase workshop at The International Conference for Higher Performance Computing, Networking, Storage and Analysis (SC12)*, 10-16 November 2012, Salt Palace Convention Center, Salt Lake City, Utah, USA. (Unpublished) 3

Hossain, M. A., Saha, Suvash C., & Gorla, R. S. R. (2005) Viscous dissipation effects on natural convection from a vertical plate with uniform surface heat flux placed in a thermally stratified media.

*International Journal of Fluid Mechanics Research*,*32*(3), pp. 269-280. 5

Hossain, M.A., Saleem, M., Saha, S.C., & Nakayama, A. (2013) Conduction-radiation effect on natural convection flow in a fluid-saturated non-Darcy porous medium enclosed by non-isothermal walls.

*Applied Mathematics and Mechanics*,*34*(6), pp. 687-702. 68

Hu, De-An, Wang, Yi-Gang, Li, Yang-Yang, Han, Xu, & Gu, Yuan-Tong (2014) A meshfree-based local Galerkin method with condensation of degree of freedom for elastic dynamic analysis.

*Acta Mechanica Sinica*,*30*(1), pp. 92-99.Hu, Dean, Long, Ting, Xiao, Yihua, Han, Xu, & Gu, YuanTong (2014) Fluid-structure interaction analysis by coupled FE-SPH model based on a novel searching algorithm.

*Computer Methods in Applied Mechanics and Engineering*,*276*, pp. 266-286.Hu, Dean, Wang, Yigang, Li, Yangyang, Gu, YuanTong, & Han, Xu (2014) A meshfree-based local Galerkin method with condensation of degree of freedom.

*Finite Elements in Analysis and Design*,*78*, pp. 16-24.Hu, Dean, Wang, Yigang, Liu, Gui-Rong, Li, Tong, Han, Xu, & Gu, YuanTong (2014) A sub‒domain smoothed Galerkin method for solid mechanics problems.

*International Journal for Numerical Methods in Engineering*,*98*(11), pp. 781-798.## I

Islam, M., Karim, A., Saha, S.C., Miller, S., & Yarlagadda, P.K. (2012) Three dimensional simulation of a parabolic trough concentrator thermal collector. In

*Proceedings of the 50th annual conference, Australian Solar Energy Society (Australian Solar Council)*, Swinburne University of Technology, Melbourne, Australia. 336

Islam, Majedul, Karim, Azharul, Saha, Suvash C., Yarlagadda, Prasad K., Miller, Sarah, & Ullah, Ihsan (2012) Visualization of thermal characteristics around the absorber tube of a standard parabolic trough thermal collector by 3D simulation. In Gu, YuanTong & Saha, Suvash C. (Eds.)

*Proceedings of the 4th International Conference on Computational Methods (ICCM2012)*, School of Chemistry, Physics and Mechanical Engineering, Queensland University of Technology, Crowne Plaza, Gold Coast, Australia. 192

Islam, Shams Ul, Abbasi, Waqas Sarwar, Saha, Suvash C., Ying, Zhou Chao, & Gu, YuanTong (2013) Numerical simulation of flow past four square cylinders in an in-line square configuration using the Lattice Boltzmann method for various separation ratios.

*KSCE Journal of Civil Engineering*. (In Press)Iu, Chi Kin & Chan, Siu Lai (2004) A simulation-based large deflection and inelastic analysis of steel frames under fire.

*Journal of Constructional Steel Research*,*60*(10), pp. 1495-1524. 24

19

Iu, Chi Kin, Chan, Siu Lai, & Zha, Xiao Xiong (2005) Nonlinear pre-fire and post-fire analysis of steel frames.

*Engineering Structures*,*27*(11), pp. 1689-1702. 24

16

## K

Karunasena, H. C. P., Senadeera, W., Brown, R. J., & Gu, Y. T. (2014) A meshfree model for plant tissue deformations during drying.

*ANZIAM Journal*,*55*, C110-C137. 40

Kosse, Vladis (2010) Advanced mathematical modelling and experimental investigation of new torque arms for shaft-mounted drives. In Teh, Kian, Davies, Ian, & Howard, Ian (Eds.)

*Proceedings of the 6th Australasian Congress on Applied Mechanics*, Engineers Australia , Perth, Western Australia, pp. 1-10.Kumar, Chandan, Joardder, Mohammad Uzzal Hossain, Karim, Azharul, Millar, Graeme J., & Amin, Zakaria Mohd (2014) Temperature redistribution modelling during intermittent microwave convective heating. In

*Proceedings of International Conference on Mechanical Engineering 2013*, Elsevier, Dhaka, Bangladesh. 22

Kumar, Chandan, Karim, Azharul, & Joardder, Mohammad Uzzal (2013) Intermittent drying of food products : a critical review.

*Journal of Food Engineering*,*121*, pp. 48-57. 5

4

Kumar, Chandan, Karim, Azharul, Saha, Suvash C., Joardder, Mohammad Uzzal Hossain, Brown, Richard J., & Biswas, Dipankar (2012) Multiphysics modelling of convective drying of food materials. In

*Proceedings of the Global Engineering, Science and Technology Conference*, Global Institute of Science and Technology, Dhaka, Bangladesh. 427

Kumar, Chandan, Razzaque , Muhammed Mahbubur, & Das, Debabrata (2009) Analysis of a negatively buoyant jet. In

*International Conference on Mechanical Engineering ICME2009*, 26-28th December, 2009, Dhaka, Bangladesh. 93

## L

Li, Tong & Gu, YuanTong (2014) A stochastic thermostat algorithm for coarse-grained thermomechanical modeling of large-scale soft matters : theory and application to microfilaments.

*Journal of Computational Physics*,*263*, pp. 177-184.Li, Tong, Gu, YuanTong, Feng, XiQiao, Yarlagadda, Prasad K., & Oloyede, Adekunle (2013) Hierarchical multiscale model for biomechanics analysis of microfilament networks.

*Journal of Applied Physics*,*113*(19), pp. 194701-194707. 95

3

1

Li, Tong, Gu, YuanTong, & Oloyede, Adekunle (2014) Molecular sliding filament model for muscular contraction based on multiscale investigation.

*Science of Advanced Materials*,*6*(7), pp. 1346-1350. 43

Li, Tong, Gu, YuanTong, Oloyede, Adekunle, & Yarlagadda, Prasad K. (2014) Molecular investigation of the mechanical properties of single actin filaments based on vibration analyses.

*Computer Methods in Biomechanics and Biomedical Engineering*,*17*(6), pp. 616-622. 17

2

Li, Tong, Gu, YuanTong, Yarlagadda, Prasad K., & Oloyede, Adekunle (2012) Continuum mechanics modelling of microfilament networks with different architectures based on molecular investigation of single F-actin. In Gu, YuanTong & Saha, Suvash C. (Eds.)

*Proceedings of the 4th International Conference on Computational Methods*, Crowne Plaza, Gold Coast, QLD. 58

Li, Tong, Gu, YuanTong, Yarlagadda, Prasad K.D.V., & Oloyede, Adekunle (2013) Multiscale investigation of microfilament networks disruption in living cells. In Yu, Shouwen (Ed.)

*13th International Conference on Fracture*, 16-21 June 2013, Beijing, China. 33

Li, Tong, Gu, YuanTong, & Zhang, Bao Cheng (2014) Mechanics of microfilaments networks : a cross-scales study.

*Applied Mechanics and Materials*,*553*, pp. 310-315. 24

Li, Tong, Hu, Dean, Yarlagadda, Prasad K., & Gu, YuanTong (2014) Physical mechanism of the compressive response of F-actin networks : significance of crosslinker unbinding events.

*Theoretical and Applied Mechanics Letters*,*4*(5), 051006-1. 2

Li, Tong, Oloyede, Adekunle, & Gu, YuanTong (2014) Adhesive characteristics of low dimensional carbon nanomaterial on actin.

*Applied Physics Letters*,*104*(2), 0237021-0237024. 74

Li, Tong, Oloyede, Adekunle, & Gu, YuanTong (2013) F-actin crosslinker : a key player for the mechanical stability of filopodial protrusion.

*Journal of Applied Physics*,*114*(21). 34

2

1

Lin, Tian Ran, O'Shea, Peter J., & Mechefske, Chris K. (2009) Reducing MRI gradient coil vibration with rib stiffeners.

*Concepts in Magnetic Resonance Part B: Magnetic Resonance Engineering*,*35*(4), pp. 198-209. 1

Lin, Tian Ran, Tan, Andy, & Ma, Lin (2012) The effect of ribbing on the energy flow between two rectangular plates coupled at right angle. In Gu, YuanTong & Saha, Suvash C. (Eds.)

*Proceedings of the 4th International Conference on Computational Methods*, Queensland University of Technology, Crowne Plaza, Gold Coast, QLD. 68

Liu, Gui-Rong, Zhang, Guiyong, Gu, YuanTong, & Wang, Y (2005) A meshfree radial point interpolation method (RPIM) for three-dimensional solids.

*Computational Mechanics*,*36*(6), pp. 421-430. 52

43

Liu, HuaShu, Ma, Lin, & Gu, YuanTong (2014) Numerical investigation of mechanical and thermal dynamic properties of the industrial transformer.

*International Journal of Computational Methods (IJCM)*,*11*(Supp 1), p. 1344012. 45

Liu, QingXia, Gu, YuanTong, Zhuang, Pinghui, Liu, Fawang, & Nie, Yufeng (2011) An implicit RBF meshless approach for time fractional diffusion equations.

*Computational Mechanics*,*48*(1), pp. 1-12. 157

27

24

Liu, Qingxia, Liu, Fawang, Turner, Ian, Anh, Vo, & Gu, YuanTong (2014) A RBF meshless approach for modeling a fractal mobile/immobile transport model.

*Applied Mathematics and Computation*,*226*, pp. 336-347.Liu, Sheng, Gu, YuanTong, & Huang, Han (2009) Determination of elastic modulus of thin coating materials using nanoindentation and finite element analysis.

*Advanced Materials Research*,*76-78*, pp. 392-397. 3

3

Liu, Sheng, Huang, Han, & Gu, YuanTong (2012) Hardness of silicon nitride thin films characterised by nanoindentation and nanoscratch deconvolution methods.

*Materials Science and Technology*,*28*(9-10), pp. 1172-1176. 2

2

Liu, Y, Hu, N, Yan, Cheng, Peng, X, & Yan, B (2009) Construction of a Mindlin pseudospectral plate element and evaluating efficiency of the element.

*Finite Elements in Analysis and Design*,*45*(8-9), pp. 538-546. 11

10

Lu, Li, Lai, M.O., Yan, Cheng, & Ye, Lin (2004) Nanostructured high strength Mg-5%Al-x%Nd alloys prepared by mechanical alloying.

*Reviews on Advanced Materials Science*,*6*(1), pp. 28-32. 7

4

## M

Ma, Hang, Qin, Qing-Hua, & Yan, Cheng (2009) Eigenstrain formulation of boundary integral equations for modeling particle-reinforced composites.

*Engineering Analysis with Boundary Elements*,*33*(3), pp. 410-419. 7

7

Ma, Hang, Yan, Cheng, & Qin, Qing-hua (2014) Eigenstrain boundary integral equations with local Eshelby matrix for stress analysis of ellipsoidal particles.

*Mathematical Problems in Engineering*,*2014*, p. 947250. 16

Mahabaleswar, U.S. & Saha, Suvash C. (2013) Analytical Solution of a Walters’ Liquid B Flow Over a Linear Stretching Sheet in a Porous Medium. In Zhao, Changying (Ed.)

*Focus on Porous Media Research.*NOVA Science Publishers, Inc, New York, pp. 121-130.Malekani, Javad, Schmutz, Beat, Gu, YuanTong, Schuetz, Michael, & Yarlagadda, Prasad K. (2011) Biomaterials in orthopedic bone plates : a review. In Yarlagadda, Prasad K. (Ed.)

*Proceedings of the 2nd Annual International Conference on Materials Science, Metal & Manufacturing (M3 2011)*, Global Science and Technology Forum, Bali, Indonesia, pp. 71-77. 873

Malekani, Javad, Schmutz, Beat, Gu, YuanTong, Schuetz, Michael, & Yarlagadda, Prasad K. (2012) Orthopedic bone plates : evolution in structure implementation technique and biomaterial.

*GSTF Journal of Engineering Technology (JET)*,*1*(1), pp. 135-140.Malekani, Javad, Schmutz, Beat, Gudimetla, Prasad, Gu, YuanTong, Schuetz, Michael, & Yarlagadda, Prasad K.D.V. (2013) Studies on bending limitations for the optimal fit of orthopaedic bone plates.

*Advanced Materials Research*,*602-604*, pp. 1181-1185. 360

1

Malekani, Javad, Yarlagadda, Prasad K.D.V., Schmutz, Beat, Gu, YuanTong, & Schuetz, Michael (2013) How to increase the accuracy of analysis and reduce the computational time in ANSYS in the case of deformation study of orthopedic bone plates.

*Advanced Materials Research*,*834-836*, pp. 1592-1600. 237

Molla, M. M., Saha, S. C., Khan, M. A. I., & Hossain, M. A. (2011) Radiation effects on natural convection laminar flow from a horizontal circular cylinder.

*Desalination and Water Treatment*,*30*, pp. 89-97. 365

2

1

Molla, M.M., Saha, S.C., & Hossain, M.A. (2012) The effect of temperature dependent viscosity on MHD natural convection flow from an isothermal sphere.

*Journal of Applied Fluid Mechanics*,*5*(2), pp. 25-31. 209

1

1

Molla, Md. Mamun, Saha, Suvash C., & Hossain, Md. Anwar (2011) Radiation effect on free convection laminar flow along a vertical flat plate with streamwise sinusoidal surface temperature.

*Mathematical and Computer Modelling*,*53*(5-6), pp. 1310-1319. 165

7

5

Molla, Md. Mamun, Saha, Suvash C., & Khan, M.A.I. (2012) MHD natural convection flow from an isothermal horizontal circular cylinder under consideration of temperature dependent viscosity.

*Engineering Computations*,*29*(8), pp. 875-887.Molla, Md. Mamun, Wang, Bing-Chen, & Saha, Suvash C. (2010) Large-Eddy Simulation of physiological pulsatile non-newtonian flow in a channel with double constriction. In

*Proceedings of the 13th Asian Congress of Fluid Mechanics*, Engineers Institute of Bangladesh, Dhaka, Bangladesh, pp. 1084-1088. 231

## N

Nguyen, Trung Dung & Gu, YuanTong (2014) Determination of strain-rate-dependent mechanical behavior of living and fixed osteocytes and chondrocytes using atomic force microscopy and inverse finite element analysis.

*Journal of Biomechanical Engineering*,*136*(10), 101004-1---8.Nguyen, Trung Dung & Gu, YuanTong (2014) Exploration of mechanisms underlying the strain-rate-dependent mechanical property of single chondrocytes.

*Applied Physics Letters*,*104*, p. 183701. 24

1

Nguyen, Trung Dung, Gu, YuanTong, Oloyede, Adekunle, & Senadeera, Wijitha (2014) Analysis of strain-rate dependent mechanical behavior of single chondrocyte : a finite element study.

*International Journal of Computational Methods*,*11*(Supp1), p. 1344005. 2

Nguyen, Trung Dung, Gu, YuanTong, Oloyede, Adekunle, & Senadeera, Wijitha (2012) Porohyperelastic analysis to explore mechanical properties of chondrocytes using numerical modeling and experiments : a finite element study. In

*4th International Conference on Computational Methods (ICCM 2012)*, 25-28 November 2012, Crowne Plaza, Gold Coast, QLD. 152

Nguyen, Trung Dung, Oloyede, Adekunle, & Gu, YuanTong (2014) Stress relaxation analysis of single chondrocytes using porohyperelastic model based on the AFM experiments.

*Theoretical and Applied Mechanics Letters*. (In Press)Nie, Yufeng, Liu, Ying, Gu, YuanTong, & Fan, Xiangjuo (2009) Fast searching algorithm for candidate satellite-node set in NLMG.

*CMES-Computer Modeling in Engineering & Sciences*,*45*(1), pp. 31-55. 6

4

## P

Paul, Gunther, Daniell, Nathan, Al-Dirini, Rami M.A., & Mohammed, Mahmood (2012)

*Seat Comfort. M4-M6.*Melbourne, Australia. (Unpublished)Paul, Sreebash C., Saha, Suvash C., & Gu, YuanTong (2013) Effect of an adiabatic fin on natural convection heat transfer in a triangular enclosure.

*American Journal of Applied Mathematics*,*1*(4), pp. 78-83. 21

Pennacchi, P., Ricci, R., Chatterton, S., Borghesani, P., Vania, A., D'Antona, G., et al. (2012) Dynamic effects of electrical pitting in steam-turbine tilting-pad thrust-bearings. In

*Proceedings of the ASME Design Engineering Technical Conference*, ASME, Chicago, Illinois, USA, pp. 731-738. 1

Persky, Rodney, Sauret, Emilie, & Ma, Lin (2014) Optimisation methods for coupled thermodynamic and 1D design of radial-inflow turbines. In

*Proceedings of the ASME 2014 Joint US-European Fluids Engineering Division Summer Meeting and 11th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM 2014*, ASME, Chicago, Illinois. (In Press)Polwaththe-Gallage, Hasitha-Nayanajith, Gu, YuanTong, Saha, Suvash C., Senadeera, Wijitha, & Oloyede, Adekunle (2012) Numerical simulation of red blood cells' deformation using SPH method. In Gu, YuanTong & Saha, Suvash C. (Eds.)

*4th International Conference on Computational Methods (ICCM 2012)*, 25-28 November 2012, Crowne Plaza, Gold Coast, QLD. 157

Polwaththe-Gallage, Hasitha-Nayanajith, Gu, YuanTong, Saha, Suvash C., Senadeera, Wijitha, & Oloyede, Adekunle (2012) Numerical simulation of red blood cells’ motion : a review. In Gu, YuanTong & Saha, Suvash C. (Eds.)

*4th International Conference on Computational Methods (ICCM 2012)*, 25-28 November 2012, Crowne Plaza, Gold Coast, QLD. 207

Polwaththe-Gallage, Hasitha-Nayanajith, Saha, Suvash C., & Gu, YuanTong (2013) Deformation properties of single red blood cell in a stenosed microchannel. In

*5th Asia Pacific Congress on Computational Mechanics & 4th International Symposium on Computational Mechanics*, 11-14 December 2013, Singapore. 62

## R

Ren, Mingfa, Li, Tong, Huang, Qizhong, & Wang, Bo (2014) Numerical investigation into the buckling behavior of advanced grid stiffened composite cylindrical shell.

*Journal of Reinforced Plastics and Composites*. (In Press)Roy, A., Tan, A.C.C., & Gu, Y.T. (2011) Simulation of inplane and out of plane AE source in thin plate. In

*The First International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing*, 27-29 April 2011, Queensland University of Technology, Brisbane, Qld. 215

## S

Saha, S.C. & Khan, M.M.K. (2011) A review of natural convection and heat transfer in attic-shaped space.

*Energy and Buildings*,*43*(10), pp. 2564-2571. 373

15

12

Saha, Suvash C. (2013) Effect of MHD and heat generation on natural convection flow in an open square cavity under microgravity condition.

*Engineering Computations*,*30*(1), pp. 5-20. 192

2

1

Saha, Suvash C. (2009)

*Natural convection adjacent to an inclined flat plate and in an attic space under various thermal forcing conditions.*PhD thesis, School of Engineering and Physical Sciences. 141

Saha, Suvash C. (2011) Periodically forced natural convection through the roof of an attic-shaped building. In Ahsan, Amimul (Ed.)

*Convection and Conduction Heat Transfer.*INTECH Open Access Publisher, Croatia, pp. 33-54. 67

Saha, Suvash C. (2012)

*Scaling analysis of natural convection boundary layers : Application to attic space.*Lambert Academic Publishing, Germany. 52

Saha, Suvash C. (2010) Scaling analysis of unsteady natural convection boundary layer for ramp heating. In

*Proceedings of the 13th Asian Congress of Fluid Mechanics*, Engineers Institute of Bangladesh, Dhaka, Bangladesh, pp. 767-770. 14

Saha, Suvash C. (2011) Scaling of free convection heat transfer in a triangular cavity for Pr>1.

*Energy and Buildings*,*43*(10), pp. 2908-2917. 104

10

8

Saha, Suvash C. (2011) Unsteady natural convection in a triangular enclosure under isothermal heating.

*Energy and Buildings*,*43*(2-3), pp. 695-703. 86

14

11

Saha, Suvash C., Brown, Richard J., & Gu, YuanTong (2012) Prandtl number scaling of the unsteady natural convection boundary layer adjacent to a vertical flat plate for Pr > 1 subject to ramp surface heat flux.

*International Journal of Heat and Mass Transfer*,*55*(23-24), pp. 7046-7055. 54

1

1

Saha, Suvash C., Brown, Richard J., & Gu, YuanTong (2012) Scaling for the Prandtl number of the natural convection boundary layer of an inclined flat plate under uniform surface heat flux.

*International Journal of Heat and Mass Transfer*,*55*(9-10), pp. 2394-2401. 79

3

3

Saha, Suvash C. & Gu, YuanTong (2012) Free convection in a triangular enclosure with fluid-saturated porous medium and internal heat generation.

*The ANZIAM Journal*,*53*, C127-C141. 115

Saha, Suvash C. & Gu, YuanTong (2012) Natural convection in a triangular enclosure due to non-uniform cooling on top.

*The ANZIAM Journal*,*53*, C53-C68. 63

Saha, Suvash C. & Gu, YuanTong (2012) Prandtl number scaling of natural convection of the flow on an inclined at plate due to uniform surface heat flux.

*The ANZIAM Journal*,*53*, C387-C403. 36

Saha, Suvash C. & Gu, YuanTong (2012) Thermo-magnetic convection of paramagnetic fluids with non-instantaneous heating. In Brandner, P.A. & Pearce, B.W. (Eds.)

*Proceedings of the 18th Australasian Fluid Mechanics Conference*, Australasian Fluid Mechanics Society, University of Tasmania, Launceston, TAS. 26

Saha, Suvash C. & Gu, YuanTong (2014) Transient air flow and heat transfer in a triangular enclosure with a conducting partition.

*Applied Mathematical Modelling*,*38*(15-16), pp. 3879-3887.Saha, Suvash C. & Khan, M.M.K. (2012) An improved boundary layer scaling with ramp heating on a sloping plate.

*International Journal of Heat and Mass Transfer*,*55*(9-10), pp. 2268-2284. 45

4

3

Saha, Suvash C., Khan, Masud, & Gu, YuanTong (2014) Unsteady buoyancy driven flows and heat transfer through coupled thermal boundary layers in a partitioned triangular enclosure.

*International Journal of Heat and Mass Transfer*,*68*, pp. 375-382.Saha, Suvash C., Lei, C., & Patterson, J. C. (2007) Effect of aspect ratio on natural convection in attics subject to periodic thermal forcing.

*The ANZIAM Journal*,*48*, C677-C691. 39

Saha, Suvash C., Lei, Chengwang, & Patterson, John C. (2006) Natural convection in a triangular enclosure subject to periodic thermal forcing. In

*Proceedings of 13th International Heat Transfer Conference*, Begell House Inc, Sydney Convention & Exhibition Centre, Sydney, NSW.Saha, Suvash C., Lei, Chengwang, & Patterson, John C. (2007) On the natural convection boundary layer adjacent to an inclined flat plate subject to ramp heating. In Jacobs, Peter, McIntyre, Tim, Cleary, Matthew, Buttsworth, David, Mee, David, Clements, Rose, et al. (Eds.)

*Proceedings of the Sixteenth Australasian Fluid Mechanics Conference*, School of Engineering, The University of Queensland, Gold Coast, Qld., pp. 121-124. 33

5

Saha, Suvash C., Lei, Chengwang, & Patterson, John C. (2007) Scaling analysis of the thermal boundary layer adjacent to an abruptly heated inclined flat plate. In Jacobs, Peter, McIntyre, Tim, Cleary, Mathew, Buttsworth, David, Mee, David, Clements, Rose, et al. (Eds.)

*Proceedings of the Sixteenth Australasian Fluid Mechanics Conference*, School of Engineering, The University of Queensland, Gold Coast, Qld., pp. 117-120. 36

Saha, Suvash C., Molla, Md. Mamun, & Khan, M. A. I. (2012) Natural convection flow in a porous enclosure with localized heating from below.

*JP Journal of Heat and Mass Transfer*,*6*(1), pp. 1-16. 300

3

Saha, Suvash C., Patterson, John C., & Lei, Chengwang (2010) Natural convection and heat transfer in attics subject to periodic thermal forcing.

*International Journal of Thermal Sciences*,*49*(10), 1899-1910 . 80

15

12

Saha, Suvash C., Patterson, John C., & Lei, Chengwang (2010) Natural convection boundary-layer adjacent to an inclined flat plate subject to sudden and ramp heating.

*International Journal of Thermal Sciences*,*49*(9), 1600-1612 . 83

13

10

Saha, Suvash C., Patterson, John C., & Lei, Chengwang (2010) Natural convection in attic-shaped spaces subject to sudden and ramp heating boundary conditions.

*Heat and Mass Transfer*,*46*(6), pp. 621-638. 40

15

12

Saha, Suvash C., Patterson, John C., & Lei, Chengwang (2010) Natural convection in attics subject to instantaneous and ramp cooling boundary conditions.

*Energy and Buildings*,*42*(8), 1192-1204 . 52

20

18

Saha, Suvash C., Patterson, John C., & Lei, Chengwang (2010) Scaling of natural convection of an inclined flat plate : ramp cooling condition.

*International Journal of Heat and Mass Transfer*,*53*(23-24), 5156-5166 . 71

9

9

Saha, Suvash C., Patterson, John C., & Lei, Chengwang (2011) Scaling of natural convection of an inclined flat plate : sudden cooling condition.

*Journal of Heat Transfer*,*133*(4), 041503-041511. 8

5

Saha, Suvash C., Sauret, Emilie, & Gu, YuanTong (2014) Magnetic convection heat transfer in an open ended enclosure filled with paramagnetic fluids.

*Applied Mechanics and Materials*,*553*, pp. 109-114. 10

Saha, Suvash C., Xu, Feng, & Molla, Md. Mamun (2011) Scaling analysis of the unsteady natural convection boundary layer adjacent to an inclined plate for Pr > 1 following instantaneous heating.

*Journal of Heat Transfer*,*133*(11), pp. 112501-112510. 55

5

1

Saha, Suvash C., Xu, Feng, Molla, Md. Mamun, & Bednarz, Tomasz P. (2010) Scaling analysis of unsteady natural convection boundary layer for instantaneous heating. In

*Proceedings of the 13th Asian Congress of Fluid Mechanics*, Engineers Institute of Bangladesh, Dhaka, Bangladesh, pp. 771-775. 44

Saleem, M., Hossain, M.A., Saha, S.C., & Gu, Y.T. (2014) Heat transfer analysis of viscous incompressible fluid by combined natural convection and radiation in an open cavity.

*Mathematical Problems in Engineering*,*2014*(412480). 24

Saleem, M., Hossain, Md.A., & Saha, S.C. (2012) Mixed convection flow of micropolar fluid in an open ended arc-shape cavity.

*Journal of Fluids Engineering - Transactions of ASME*,*134*(9), 091101.Sauret, Emilie & Gu, YuanTong (2014) Three-dimensional off-design numerical analysis of an organic Rankine cycle radial-inflow turbine.

*Applied Energy*,*135*, pp. 202-211.Sauret, Emilie, Saha, Suvash C., & Gu, YuanTong (2013) Numerical simulations of particle deposition in metal foam heat exchangers. In

*Proceedings of the 5th Asia Pacific Congress on Computational Mechanics (APCOM 2013) and 4th International Symposium on Computational Mechanics (ISCM 2013)*, World Scientific Publishing Co, Singapore.Siddiqa, Sadia, Hossain, M. A., & Saha, Suvash C. (2013) Natural convection flow in a strong cross magnetic field with radiation.

*Journal of Fluids Engineering - Transactions of the ASME*,*135*(5), 051202-1. 72

1

Siddiqa, Sadia, Hossain, M. Anwar, & Saha, Suvash C. (2012) Double diffusive magneto-convection fluid flow in a strong cross magnetic field with uniform surface heat and mass flux.

*Journal of Heat Transfer, Transaction of ASME*,*134*, p. 114506. 3

3

Siddiqa, Sadia, Hossain, Md. Anwar, & Saha, Suvash C. (2013) Natural convection flow with surface radiation along a vertical wavy surface.

*Numerical Heat Transfer, Part A : Applications*,*64*(5), pp. 400-415. 4

2

Sin, Daniel, Tan, Andy, Kim, Young-Bok, Kelson, Neil, & Chadwick, Gary (2006) Flow estimation of a double output centrifugal artificial heart pump as a biventricular assist device by computational fluid dynamics. In Sang, R. & Dobson, J. (Eds.)

*Proceedings of the Australian Institute of Physics (AIP) 17th National Congress 2006*, 3-8 December 2006, Brisbane, Queensland. 569

Sin, Dong-Choon, Tan, Andy C. C., Kelson, Neil A., & Chadwick, Gary (2006) Blood flow in a double output centrifugal artificial heart pump as a biventricular assist device.

*The ANZIAM Journal*,*48*, C949-C962.Sojoudi, A., Afshin, H., Farhanieh, B., & Saha, Suvash C. (2012) Large eddy simulation of smoke flow in a real road tunnel fire using FDS. In Gu, YuanTong, Saha, Suvash C., & Liu, Gui-Rong (Eds.)

*Proceedings of the 4th International Conference on Computational Methods (ICCM2012)*, Crowne Plaza, Gold Coast, Australia. 225

Sojoudi, A., Vakilimoghaddam, F., Neishabouri, R., & Saha, Suvash C. (2012) On the oscillatory behavior of transient Rayleigh Benard convection of air for 2D channel flow at moderate Rayleigh numbers. In Ao, S.I., Gelman, L., Hukins, D.W.L., Hunter, A., & Korsunsky, A. M. (Eds.)

*Proceedings of the World Congress on Engineering 2012 Vol III*, Newswood Limited, London, U.K., pp. 1874-1878. 145

Sojoudi, Atta, Mazloomi, Ali, Saha, Suvash C., & Gu, YuanTong (2014) Similarity solutions for flow and heat transfer of non-Newtonian fluid over a stretching surface.

*Journal of Applied Mathematics*,*2014*, pp. 718319-1. 19

Sojoudi, Atta & Saha, Suvash C. (2012) Shear thinning and shear thickening non-Newtonian confined fluid flow over rotating cylinder.

*American Journal of Fluid Dynamics*,*2*(6), pp. 117-121. 192

Sojoudi, Atta, Saha, Suvash C., Gu, YuanTong, & Hossain, Md. Anwar (2013) Steady natural convection of non-Newtonian power-law fluid in a trapezoidal enclosure.

*Advances in Mechanical Engineering*,*2013*(653108). 14

Sojoudi, Atta, Saha, Suvash C., Khezerloo, Marzieh, & Gu, Y. T. (2014) Unsteady natural convection within a porous enclosure of sinusoidal corrugated side walls.

*Transport in Porous Media*. (In Press)Sun, Xiao-Yu, Li, ChunYang, Gu, YuanTong, & Feng, Xi-Qiao (2013) Mechanical properties of bioinspired bicontinuous nanocomposites.

*Computational Materials Science*,*80*, pp. 71-78.## T

Taher, M.A., Saha, S.C., Lee, Y.W., & Kim, H.D. (2013) Numerical study of lid-driven square cavity with heat generation using LBM.

*American Journal of Fluid Dynamics*,*3*(2), pp. 40-47. 36

Thibbotuwawa, Namal, Gu, YuanTong, Oloyede, Adekunle, Senadeera, Wijitha, & Li, Tong (2012) Finite element shoulder models. In Gu, YuanTong & Saha, Suvash C. (Eds.)

*Proceedings of 4th International Conference on Computational Methods (ICCM 2012)*, Crowne Plaza, Gold Coast. 165

Thibbotuwawa, Namal, Oloyede, Adekunle, Senadeera, Wijitha, & Gu, YuanTong (2014) Hyperelastic constitutive relationship for the strain-rate dependent behavior of shoulder and other joint cartilages. In Goh, James (Ed.)

*IFMBE Proceedings : The 15th International Conference on Biomedical Engineering*, Springer International Publishing, Singapore, pp. 255-258.Thiyahuddin, Izzat, Gu, YuanTong, Gover, Rory, & Thambiratnam, David (2014) Fluid-structure interaction analysis of full scale vehicle-barrier impact using coupled SPH-FEA.

*Engineering Analysis with Boundary Elements*,*42*, pp. 26-36.Thiyahuddin, Izzat, Gu, YuanTong, & Thambiratnam, David (2014) Revolute joint approach to model joint mechanism in water-filled road safety barriers.

*Applied Mechanics and Materials : Advances in Computational Mechanics*, pp. 763-768. 35

Thiyahuddin, Izzat, Gu, YuanTong, Thambiratnam, David, & Gudimetla, Prasad (2012) Impact and energy absorption of road safety barriers by coupled SPH/FEM.

*International Journal of Protective Structures*,*3*(3), pp. 257-274. 306

1

Thiyahuddin, Izzat, Gu, YuanTong, Thambiratnam, David, & Thilakarathna, Herath Mudiyanselage Indika (2014) Impact and energy absorption of portable water-filled road safety barrier system fitted with foam.

*International Journal of Impact Engineering*,*72*, pp. 26-39.Thiyahuddin, Izzat, Gu, YuanTong, & Thambiratnam, David P. (2013) Experimental and numerical study of water-filled road safety barriers. In

*1st Australasian Conference on Computational Mechanics (ACCM2013)*, 3-4 October 2013, University of Sydney, Sydney, Australia. (In Press)Thiyahuddin, Izzat, Gu, YuanTong, & Thambiratnam, David P. (2012) A coupled SPH/FEM analysis of portable water filled barriers. In

*4th International Conference on Computational Methods (ICCM2012)*, 25-28 November 2012, Gold Coast, Qld. 212

Thiyahuddin, Izzat, Thambiratnam, David, & Gu, YuanTong (2014) Effect of joint mechanism on vehicle redirectional capability of water-filled road safety barrier systems.

*Accident Analysis & Prevention*,*71*, pp. 60-71.Thiyahuddin, Izzat, Thambiratnam, David, Gu, YuanTong, & Gover, Rory (2013) Safety enhancement of water-filled road safety barrier using interaction of composite materials. In Suwartha, Nyoman (Ed.)

*QiR Proceedings 2013*, Faculty of Engineering, Universitas Indonesia, Yogjakarta, Indonesia. 117

Thiyahuddin, Izzat, Thambiratnam, David, Gu, YuanTong, & Gover, Rory (2013) Safety enhancement of water-filled road safety barrier using interaction of composite materials.

*International Journal of Technology*,*4*(3), pp. 259-268. 62

Thiyahuddin, Mohd I., Thambiratnam, David P., & Gu, YuanTong (2014) Performance of new-generation portable water-filled road safety barriers under vehicular impact. In Haddad, Yehia (Ed.)

*AES-ATEMA’2014 Seventeen International Conference on Advances and Trends in Engineering Materials and their Applications*, 16-20 June 2014, Montreal, Canada. 12

Tu, W., Gu, Y.T., & Wen, P. (2012) Effective shear modulus approach for two dimensional solids and plate bending problems by meshless point collocation method.

*Engineering Analysis with Boundary Elements*,*36*(5), pp. 675-684. 79

1

1

## U

Umchid, Sutee & Yarlagadda, Prasad K. (2013) Simulation-based comparison of pull-push system in motorcycle assembly line.

*Applied Mechanics and Materials*,*241-244*, pp. 1507-1513. 1

## V

Vakilimoghaddam, Farbod, Saha, Suvash C., Sojoudi, Atta, & Vakilimoghadam, Farnaz (2012) Finite volume approach of natural convection in a triangular enclosure with localized heating from below. In Gu, YuanTong, Saha, Suvash C., & Liu, Gui-Rong (Eds.)

*Proceedings of the 4th International Conference on Computational Methods (ICCM2012)*, Crowne Plaza, Gold Coast. 256

## W

Wang, K.Y., Dhanasekar, Manicka, Qin, Qinghua, & Kang, Y.L. (2006) Contact analysis using Trefftz and interface finite elements.

*Computer Assisted Mechanics and Engineering Sciences*,*13*(3), pp. 457-471.Wang, Liang, Bai, Ruixiang, & Yan, Cheng (2010) Interfacial debonding behavior of composite beam/plates with PZT patch.

*Composite Structures*,*92*(6 ), pp. 1410-1415. 282

3

Wang, M.C., Yan, C., Ma, L., & Hu, N. (2013) Molecular dynamics investigation on edge stress and shape transition in graphene nanoribbons.

*Computational Materials Science*,*68*, pp. 138-141. 25

3

2

Wang, Mingchao, Galpaya, Dilini, Lai, Zheng Bo, Xu, Yanan, & Yan, Cheng (2013) Thermal transport in graphene-polymer nanocomposites. In

*Fourth International Conference on Smart Materials and Nanotechnology in Engineering [Proceedings of SPIE, 8793]*, SPIE - Society of Photo-Optical Instrumentation Engineers , Gold Coast, Qld, pp. 1-6. 204

Wang, Mingchao, Lai, Zheng Bo, Galpaya, Dilini, Yan, Cheng, Hu, Ning, & Zhou, Limin (2014) Atomistic simulation of surface functionalization on the interfacial properties of graphene-polymer nanocomposites.

*Journal of Applied Physics*,*115*(12), 123520 . 26

Wang, Mingchao & Yan, Cheng (2014) Atomistic simulation of interfacial behaviour in graphene-polymer nanocomposites.

*Science of Advanced Materials*,*6*, pp. 1-5. 1

Wang, Mingchao, Yan, Cheng, Galpaya, Dilini, Lai, Zheng Bo, Ma, Lin, Hu, Ning, et al. (2013) Molecular dynamics simulation of fracture strength and morphology of defective graphene.

*Journal of Nano Research*,*23*, pp. 43-49. 99

Wang, Mingchao, Yan, Cheng, & Hu, Ning (2013) Deformation and failure of graphene sheet and graphene-polymer interface. In

*13th International Conference on Fracture*, 16-21 June, Beijing, China. (In Press) 180

Wang, Mingchao, Yan, Cheng, Ma, Lin, Hu, Ning, & Chen, Mingwei (2012) Effect of defects on fracture strength of graphene sheets.

*Computational Materials Science*,*54*, pp. 236-239. 62

33

31

Wang, Mingchao, Yan, Cheng, Ma, Lin, Hu, Ning, & Zhang, Guangping (2013) Numerical analysis of shape transition in graphene nanoribbons.

*Computational Materials Science*,*75*(July), pp. 69-72. 17

2

2

Wei, Ye, Zhan, Haifei, Xia, Kang, Zhang, Wendong, Sang, Shengbo, & Gu, YuanTong (2014) Resonance of graphene nanoribbons doped with nitrogen and boron : a molecular dynamics study.

*Beilstein Journal of Nanotechnology*,*5*, pp. 717-725. 8

Wu, Y, Lui, G, & Gu, YuanTong (2005) Application of meshless local Petrov-Galerkin (MLPG) approach to simulation of incompressible flow.

*Numerical Heat Transfer Part B: Fundamentals: an international journal of computation and methodology*,*48*(5), pp. 459-475. 32

26

## X

Xia, Kang, Zhan, Haifei, Wei, Ye, & Gu, YuanTong (2014) Tensile properties of a boron/nitrogen-doped carbon nanotube–graphene hybrid structure.

*Beilstein Journal of Nanotechnology*,*5*, pp. 329-336. 15

Xia, Kang, Zhan, Haifei, Wei, Ye, Sang, Shengbo, & Gu, YuanTong (2014) Engineering the mechanical properties of graphene nanotube hybrid structures through structural modulation. In Liu, Gui-Rong & Guan, Z. W. (Eds.)

*Proceedings of the International Conference on Computational Methods*, Scientech Publisher llc, USA, Cambridge, England, pp. 1-9. 7

Xu, X., Gu, Y.T., & Yang, X. (2011) A node-based smoothed conforming point interpolation method (NS-CPIM) for elasticity problems.

*International Journal of Computational Methods*,*8*(4), pp. 801-812. 69

1

Xu, Xu, Liu, Gui-Rong, & Gu, YuanTong (2012) A novel quadratic Edge-based Smoothed Conforming Point Interpolation Method (ES-CPIM) for elasticity problems.

*International Journal of Computational Methods*,*9*(2). 2

1

Xu, Xu, Liu, Gui-Rong, Gu, YuanTong, Zhang, GuiYong, Luo, J .W., & Peng, J. X. (2010) A point interpolation method with locally smoothed strain field (PIM-LS2) for mechanics problems using triangular mesh.

*Finite Elements in Analysis and Design*,*46*(10), pp. 862-874.Xu, Xu, Luo, Jiawei, & Gu, YuanTong (2012) Collective dynamics and control of a 3-D small-world network with time delays.

*International Journal of Bifurcation and Chaos in Applied Sciences and Engineering*,*22*(11). 2

1

Xue, Yibin, Li, Tong, & Abdi, Frank (2013) Fatigue damage initiation life prediction for heterogeneous metals. In

*54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference*, American Institute of Aeronautics and Astronautics, Boston Park Plaza Hotel & Towers, Boston, Massachusetts, US.## Y

Yan, Cheng, Bai, R, Yarlagadda, Prasad, & Yu, Hao (2009) Fracture behaviour of microstructured silica optical fibres.

*Australian Journal of Mechanical Engineering*,*7*(1), pp. 93-98.Yan, Cheng, Bai, Ruixiang, Gu, YuanTong, & Ma, Wenjie (2008) Investigation on mechanical behaviour of AM60 magnesium alloys.

*Journal of Achievements in Materials and Manufacturing Engineering*,*31*(2), pp. 398-401.Yan, Cheng, Bai, Ruixiang, Yu, Hong, Canning, John, & Law, S.S. (2010) The strength and failure of silica optical fibers.

*Physica Scripta*,*2010*(T139), pp. 1-5.Yan, Cheng & Mai, Yiu-Wing (1998) Effect of constraint on void growth near a blunt crack tip.

*International Journal of Fracture*,*92*(3), pp. 287-304. 18

12

13

Yan, Cheng & Mai, Yiu-Wing (2000) Effect of crack depth and specimen width on fracture toughness of a carbon steel in the ductile-brittle transition region.

*International Journal of Pressure Vessels and Piping*,*77*(6), pp. 313-319. 33

13

11

Yan, Cheng & Mai, Yiu-Wing (1998) Numerical investigation on stable crack growth in plane stress.

*International Journal of Fracture*,*91*(2), pp. 117-130. 26

9

2

Yan, Cheng, Qin, Qinghua, & Mai, Yiu-Wing (2001) Nonlinear analysis of plastic ball grid array solder joints.

*Journal of Materials Science: Materials in Electronics*,*12*(11), pp. 667-673. 24

7

6

Yan, Cheng, Yan, L.L., Ye, Lin, Lu, Li, Lai, M.O., & Mai, Yiuwing (2003) Fabrication and microstructure of mechanically alloyed Mg-Al-Nd alloys.

*Materials Science Forum*,*437-438*, pp. 113-116. 1

1

## Z

Zhan, Haifei & Gu, YuanTong (2011) Atomistic exploration of deformation properties of copper nanowires with pre-existing defects.

*Computer Modeling in Engineering & Sciences*,*80*(1), pp. 23-56. 5

3

Zhan, Haifei & Gu, YuanTong (2011) Exploration of the defect’s effect on the mechanical properties of different orientated nanowires.

*Advanced Materials Research*,*328-30*, pp. 1239-1244. 79

1

Zhan, Haifei & Gu, YuanTong (2012) Modified beam theories for bending properties of nanowires considering surface/intrinsic effects and axial extension effect.

*Journal of Applied Physics*,*111*(8). 106

5

3

Zhan, Haifei & Gu, YuanTong (2011) Molecular dynamics study of dynamic buckling properties of nanowires with defects. In Kaneko, Shigehiko (Ed.)

*Proceedings of the 14th Asia Pacific Vibration Conference 2011*, The Hong Kong Polytechnic University, The Hong Kong Polytechnic University, HongKong, pp. 1-7. 213

Zhan, Haifei & Gu, YuanTong (2012) Surface effects on the dual-mode vibration of <110> silver nanowires with different cross-sections.

*Journal of Physics D : Applied Physics*,*45*(46). 112

2

Zhan, Haifei & Gu, YuanTong (2012) Theoretical and numerical investigation of bending properties of Cu nanowires.

*Computational Materials Science*,*55*, pp. 73-80. 131

12

7

Zhan, Haifei & Gu, YuanTong (2012) A fundamental numerical and theoretical study for the vibrational properties of nanowires.

*Journal of Applied Physics*,*111*(12), p. 124303. 61

11

5

Zhan, Haifei, Gu, YuanTong, Feng, XiQiao, & Yarlagadda, Prasad K. (2011) Numerical exploration of plastic deformation mechanisms of copper nanowires with surface defects.

*Computational Materials Science*,*50*(12), pp. 3425-3430. 165

11

7

Zhan, Haifei, Gu, YuanTong, & Park, Harold S. (2012) Beat phenomena in metal nanowires, and their implications for resonance-based elastic property measurements.

*Nanoscale*,*4*(21), pp. 6779-6785. 89

8

7

Zhan, Haifei, Gu, YuanTong, Yan, Cheng, & Yarlagadda, Prasad K. (2014) Bending properties of Ag nanowires with pre-existing surface defects.

*Computational Materials Science*,*81*, pp. 45-51.Zhan, Haifei, Gu, YuanTong, Yan, Cheng, & Yarlagadda, Prasad K. (2012) Influence of grain boundaries on the vibrational properties of silver nanowires. In Gu, YuanTong & Saha, Suvash C. (Eds.)

*4th International Conference on Computational Methods*, Crowne Plaza, Gold Coast, QLD, pp. 1-8. 58

Zhan, Haifei, Gu, YuanTong, & Yarlagadda, Prasad K. (2011) Advanced numerical characterization of mono-crystalline copper with defects.

*Advanced Science Letters*,*4*(4-5), pp. 1293-1301. 7

5

Zhan, Haifei, Gu, YuanTong, & Yarlagadda, Prasad K. (2010) Atomistic numerical investigation of single-crystal copper nanowire with surface defects. In Howard, Ian, Teh, Kian, & Davies, Ian (Eds.)

*Proceedings of the 6th Australasian Congress on Applied Mechanics : Australian Journal of Mechanical Engineering*, Engineers Australia, Perth Convention Exhibition Centre, Perth, WA, pp. 1-9.Zhan, Haifei, Wei, Ye, & Gu, YuanTong (2014) Tuneable resonance properties of graphene by nitrogen-dopant.

*Applied Mechanics and Materials*,*553*, pp. 3-9. 27

1

Zhan, Haifei, Zhang, Yingyan, Bell, John M., Mai, Yiu-Wing, & Gu, YuanTong (2014) Structure-mediated thermal transport of monolayer graphene allotropes nanoribbons.

*Carbon*,*77*, pp. 416-423.Zhang, Baocheng, Li, Tong, Zhan, Haifei, & Gu, Y.T. (2014) Impact of the piston secondary motion on its slap force.

*Applied Mechanics and Materials*,*553*, pp. 582-587.Zhang, Ying Yan & Gu, YuanTong (2013) Mechanical properties of graphene : effects of layer number, temperature and isotope.

*Computational Materials Science*,*71*(1), pp. 197-200. 77

5

3

Zhang, Zuoyan & Dhanasekar, Manicka (2009) Dynamics of railway wagons subjected to braking/traction torque.

*Vehicle System Dynamics*,*47*(3), pp. 285-307. 3

2

Zhu, X. F., Zhang, G. P., Yan, C., Zhu, S. J., & Sun, J. (2010) Scale-dependent fracture mode in Cu-Ni laminate composites.

*Philosophical Magazine Letters*,*90*(6), pp. 413-421. 92

3

3

Zhuang, Pinghui, Gu, YuanTong, Liu, Fawang, Turner, Ian, & Yarlagadda, Prasad K. (2011) Time-dependent fractional advection–diffusion equations by an implicit MLS meshless method.

*International Journal for Numerical Methods in Engineering*. 178

11

9

Zong, Nannan, Dhanasekar, Manicka, Bayissa, Wirtu, & Boyd, Paul (2010) Study of wheel-rail impact at insulated rail joint through experimental and numerical methods. In

*Key Technologies of Railway Engineering-High-speed Railway, Heavy Haul Railway and Urban Rail Transit*, China Railway Publishing House, Beijing Jiaotong University, Beijing, pp. 356-360.