Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > MECHANICAL ENGINEERING (091300) > Numerical Modelling and Mechanical Characterisation (091307)"

Subjects classification (32824)
- Australian and New Zealand Standard Research Classification (32824)
  - ENGINEERING (090000) (4663)
    - MECHANICAL ENGINEERING (091300) (592)
      - Numerical Modelling and Mechanical Characterisation (091307) (150)

Number of items at this level: 150.

Book

Saha, Suvash C. (2012) Scaling analysis of natural convection boundary layers : Application to attic space. Lambert Academic Publishing, Germany.

Book Chapter

Gu, YuanTong & Zhan, Haifei (2013) Numerical Characterization of Nanowires. In Li, Shaofan & Gao, Xin-Lin (Eds.) Handbook of Micromechanics and Nanomechanics. Pan Stanford Publishing, USA, pp. 869-916.

Mahabaleswar, U. S. & Saha, Suvash C. (2013) Analytical solution of a Walters’ liquid B flow over a linear stretching sheet in a porous medium. In Zhao, Changying (Ed.) Focus on Porous Media Research. NOVA Science Publishers, Inc, USA. (In Press)

Saha, Suvash C. (2011) Periodically forced natural convection through the roof of an attic-shaped building. In Ahsan, Amimul (Ed.) Convection and Conduction Heat Transfer. INTECH Open Access Publisher, Croatia, pp. 33-54.

Journal Article

Alamusi, Affa, Hu, Ning, Qiu, Jianhui, Li, Yuan, Chang, Christiana, Atobe, Satoshi, et al. (2013) Multi-scale numerical simulations of thermal expansion properties of CNT-reinforced nanocomposites. Nanoscale Research Letters, 8(15).

Bhowmick, Sidhartha, Molla, Md. Mamun, & Saha, Suvash (2013) Non-Newtonian natural convection flow along an isothermal horizontal circular cylinder using modified power-law model. American Journal of Fluid Dynamics. (In Press)

Cui, Yuhong, Wang, Juan, Dhanasekar, Manicka, & Qin, Qinghua (2007) Mode III fracture analysis by Trefftz boundary element method. Acta Mechanica Sinica, 23(2), pp. 173-181.

Dhanasekar, Manicka & Han, Jianjun (2006) Fracture analysis of internally cracked railheads. International Journal of Mechanics and Solids, 1(1), pp. 26-31.

Dhanasekar, Manicka, Han, Jianjun, & Qin, Qinghua (2007) Interaction of surface and internal cracks in railhead. Computer Assisted Mechanics and Engineering Sciences, 14(1), pp. 79-89.

Ding, Kan & Dhanasekar, Manicka (2007) Flexural behaviour of bonded-bolted butt joints due to bolt looseness. Advances in Engineering Software: including computing systems in engineering, 38(8-9), pp. 598-606.

Feng, XiQiao, Li, Yue, Cao, Yan-Ping, Yu, Shou-Wen, & Gu, YuanTong (2010) Design methods of rhombic tensegrity structures. Acta Mechanica Sinica, 26(4), pp. 559-565.

Fu, Qiang, Zhan, Haifei, & Gu, YuanTong (2012) Atomistic investigations of single-crystal silicon with pre-existing defects. Advanced Science Letters, 14(1), pp. 165-170.

Gu, YuanTong (2005) Meshfree methods and their comparisons. International Journal of Computational Methods (IJCM), 2(4), pp. 477-515.

Gu, YuanTong (2010) Meshless TL and UL approaches for large deformation analysis. Advanced Materials Research, 139 -(141), pp. 893-896.

Gu, YuanTong (2010) An adaptive local meshfree updated Lagrangian approach for large deformation analysis of metal forming. Advanced Materials Research, 97-101, pp. 2664-2667.

240

Gu, YuanTong (2008) An elasto-plastic analysis of solids by the local meshless method based on MLS. International Journal of Modern Physics B, 22(31/32), pp. 5780-5786.

197

Gu, YuanTong (2011) An enriched radial point interpolation method based on weak-form and strong-form. Mechanics of Advanced Materials and Structures, 18(8), pp. 578-584.

Gu, YuanTong & Liu, Gui-Rong (2005) Meshless methods coupled with other numerical methods. Tsinghua Science and Technology, 10(1), pp. 8-15.

Gu, YuanTong & Liu, Gui-Rong (2006) Meshless techniques for convection dominated problems. Computational Mechanics, 38(2), pp. 272-283.

Gu, YuanTong & Liu, Gui-Rong (2005) A meshfree weak-strong (MWS) form method for time dependant problems. Computational Mechanics, 35(2), pp. 134-145.

Gu, YuanTong, Wang, Qingxia, & Lam, K (2007) A meshless local Kriging method for large deformation analyses. Computer Methods in Applied Mechanics and Engineering, 196(9-12), pp. 1673-1684.

Gu, YuanTong, Yan, Cheng, & Yarlagadda, Prasad (2009) An advanced meshless technique for large deformation analysis of metal forming. Australian Journal of Mechanical Engineering, 7(1), pp. 25-32.

Gu, YuanTong & Yarlagadda, Prasad K. (2009) A bridging transition technique for the combination of meshfree method with finite element method in 2D solids and structures. Computational Mechanics, 44, pp. 119-131.

143

Gu, YuanTong & Zhan, Haifei (2012) MD investigations for mechanical properties of copper nanowires with and without surface defects. International Journal of Computational Methods, 9(1), pp. 1-8.

121

Gu, YuanTong, Zhan, Haifei, & Xu, Xu (2012) Numerical investigation of mechanical properties of nanowires : a review. Interaction and Multiscale Mechanics, 5(2), pp. 115-129.

Gu, YuanTong & Zhang, Liangchi (2006) Deformation characterization of a nanoelectromechanical switch. Journal of Physics, 34(1), pp. 118-123.

Gu, YuanTong & Zhang, Liangchi (2007) A New Method for Stress and Deformation Analysis from Nano to Macro Dimensional Scales. Key Engineering Materials, 340-34, pp. 955-960.

Gu, YuanTong & Zhang, Liangchi (2006) A simple method for analysing the deformation of nanoelectromechanical switches based on carbon nanotubes. International Journal of Nanomanufacturing, 1(2), pp. 210-222.

Gu, YuanTong & Zhuang, Pinghui (2012) Anomalous subdiffusion equations by the meshless collocation method. Australian Journal of Mechanical Engineering, 10(1), pp. 1-8.

Gu, YuanTong, Zhuang, Pinghui, & Liu, Fawang (2010) An advanced implicit meshless approach for the non-linear anomalous subdiffusion equation. Computer Modeling in Engineering & Sciences, 56(3), pp. 303-334.

136

Gu, YuanTong, Zhuang, Pinghui, & Liu, QingXia (2011) An advanced meshless method for time fractional diffusion equation. International Journal of Computational Methods, 8(4), pp. 653-665.

140

Gudimetla, Prasad V., Kelson, Neil A., & El-Atm, Billy (2009) Analysis of the hydrodynamic performance of three- and four-fin surfboards using computational fluid dynamics. Australian Journal of Mechanical Engineering, 7(1), pp. 61-67.

Hasan, Muhammad N., Saha, Suvash C., & Gu, YuanTong (2012) Unsteady natural convection within a differentially heated enclosure of sinusoidal corrugated side walls. International Journal of Heat and Mass Transfer, 55(21-22), pp. 5696-5708.

Hasan, Muhammad Noman, Saha, Suvash C., & Gu, YuanTong (2013) Mixed convection over a horizontal plate with streamwise non-uniform surface temperature distribution. Journal of Heat Transfer. (In Press)

He, Jie, Chen, Yikai, Zhao, Chihang, Qi, Zhiguo, & Ren, Xiuhuan (2011) Heavy truck suspension optimization based on modified skyhook damping control. International Journal of Heavy Vehicle Systems, 18(2), pp. 161-178.

Hossain, M. A., Saha, Suvash C., & Gorla, R. S. R. (2005) Viscous dissipation effects on natural convection from a vertical plate with uniform surface heat flux placed in a thermally stratified media. International Journal of Fluid Mechanics Research, 32(3), pp. 269-280.

Hossain, M.A., Saleem, M., Saha, S.C., & Nakayama, A. (2013) Conduction-radiation effect on natural convection flow in a fluid-saturated non-Darcy porous medium enclosed by non-isothermal walls. Applied Mathematics and Mechanics. (In Press)

Lin, Tian Ran, O'Shea, Peter J., & Mechefske, Chris K. (2009) Reducing MRI gradient coil vibration with rib stiffeners. Concepts in Magnetic Resonance Part B: Magnetic Resonance Engineering, 35(4), pp. 198-209.

Liu, Gui-Rong, Zhang, Guiyong, Gu, YuanTong, & Wang, Y (2005) A meshfree radial point interpolation method (RPIM) for three-dimensional solids. Computational Mechanics, 36(6), pp. 421-430.

Liu, QingXia, Gu, YuanTong, Zhuang, Pinghui, Liu, Fawang, & Nie, Yufeng (2011) An implicit RBF meshless approach for time fractional diffusion equations. Computational Mechanics, 48(1), pp. 1-12.

Liu, Sheng, Gu, YuanTong, & Huang, Han (2009) Determination of elastic modulus of thin coating materials using nanoindentation and finite element analysis. Advanced Materials Research, 76-78, pp. 392-397.

Liu, Sheng, Huang, Han, & Gu, YuanTong (2012) Hardness of silicon nitride thin films characterised by nanoindentation and nanoscratch deconvolution methods. Materials Science and Technology, 28(9-10), pp. 1172-1176.

Liu, Y, Hu, N, Yan, Cheng, Peng, X, & Yan, B (2009) Construction of a Mindlin pseudospectral plate element and evaluating efficiency of the element. Finite Elements in Analysis and Design, 45(8-9), pp. 538-546.

Ma, Hang, Qin, Qing-Hua, & Yan, Cheng (2009) Eigenstrain formulation of boundary integral equations for modeling particle-reinforced composites. Engineering Analysis with Boundary Elements, 33(3), pp. 410-419.

Malekani, Javad, Schmutz, Beat, Gu, YuanTong, Schuetz, Michael, & Yarlagadda, Prasad K. (2012) Orthopedic bone plates : evolution in structure implementation technique and biomaterial. GSTF Journal of Engineering Technology (JET), 1(1), pp. 135-140.

Malekani, Javad, Schmutz, Beat, Gudimetla, Prasad, Gu, YuanTong, Schuetz, Michael, & Yarlagadda, Prasad K.D.V. (2013) Studies on bending limitations for the optimal fit of orthopaedic bone plates. Advanced Materials Research, 602-604, pp. 1181-1185.

Molla, M. M., Saha, S. C., Khan, M. A. I., & Hossain, M. A. (2011) Radiation effects on natural convection laminar flow from a horizontal circular cylinder. Desalination and Water Treatment, 30, pp. 89-97.

127

Molla, M.M., Saha, S.C., & Hossain, M.A. (2012) The effect of temperature dependent viscosity on MHD natural convection flow from an isothermal sphere. Journal of Applied Fluid Mechanics, 5(2), pp. 25-31.

111

Molla, Md. Mamun, Saha, Suvash C., & Hossain, Md. Anwar (2011) Radiation effect on free convection laminar flow along a vertical flat plate with streamwise sinusoidal surface temperature. Mathematical and Computer Modelling, 53(5-6), pp. 1310-1319.

Molla, Md. Mamun, Saha, Suvash C., & Khan, M.A.I. (2012) MHD natural convection flow from an isothermal horizontal circular cylinder under consideration of temperature dependent viscosity. Engineering Computations, 29(8), pp. 875-887.

Nie, Yufeng, Liu, Ying, Gu, YuanTong, & Fan, Xiangjuo (2009) Fast searching algorithm for candidate satellite-node set in NLMG. CMES-Computer Modeling in Engineering & Sciences, 45(1), pp. 31-55.

Saha, S.C. & Khan, M.M.K. (2011) A review of natural convection and heat transfer in attic-shaped space. Energy and Buildings, 43(10), pp. 2564-2571.

169

Saha, Suvash C. (2013) Effect of MHD and heat generation on natural convection flow in an open square cavity under microgravity condition. Engineering Computations, 30(1), pp. 5-20.

Saha, Suvash C. (2011) Scaling of free convection heat transfer in a triangular cavity for Pr>1. Energy and Buildings, 43(10), pp. 2908-2917.

Saha, Suvash C. (2011) Unsteady natural convection in a triangular enclosure under isothermal heating. Energy and Buildings, 43(2-3), pp. 695-703.

Saha, Suvash C., Brown, Richard J., & Gu, YuanTong (2012) Prandtl number scaling of the unsteady natural convection boundary layer adjacent to a vertical flat plate for Pr > 1 subject to ramp surface heat flux. International Journal of Heat and Mass Transfer, 55(23-24), pp. 7046-7055.

Saha, Suvash C., Brown, Richard J., & Gu, YuanTong (2012) Scaling for the Prandtl number of the natural convection boundary layer of an inclined flat plate under uniform surface heat flux. International Journal of Heat and Mass Transfer, 55(9-10), pp. 2394-2401.

Saha, Suvash C. & Gu, YuanTong (2012) Free convection in a triangular enclosure with fluid-saturated porous medium and internal heat generation. The ANZIAM Journal, 53, C127-C141.

Saha, Suvash C. & Gu, YuanTong (2012) Natural convection in a triangular enclosure due to non-uniform cooling on top. The ANZIAM Journal, 53, C53-C68.

Saha, Suvash C. & Gu, YuanTong (2012) Prandtl number scaling of natural convection of the flow on an inclined at plate due to uniform surface heat flux. The ANZIAM Journal, 53, C387-C403.

Saha, Suvash C. & Khan, M.M.K. (2012) An improved boundary layer scaling with ramp heating on a sloping plate. International Journal of Heat and Mass Transfer, 55(9-10), pp. 2268-2284.

Saha, Suvash C., Lei, C., & Patterson, J. C. (2007) Effect of aspect ratio on natural convection in attics subject to periodic thermal forcing. The ANZIAM Journal, 48, C677-C691.

Saha, Suvash C., Molla, Md. Mamun, & Khan, M. A. I. (2012) Natural convection flow in a porous enclosure with localized heating from below. JP Journal of Heat and Mass Transfer, 6(1), pp. 1-16.

169

Saha, Suvash C., Patterson, John C., & Lei, Chengwang (2010) Natural convection and heat transfer in attics subject to periodic thermal forcing. International Journal of Thermal Sciences, 49(10), 1899-1910 .

Saha, Suvash C., Patterson, John C., & Lei, Chengwang (2010) Natural convection boundary-layer adjacent to an inclined flat plate subject to sudden and ramp heating. International Journal of Thermal Sciences, 49(9), 1600-1612 .

Saha, Suvash C., Patterson, John C., & Lei, Chengwang (2010) Natural convection in attic-shaped spaces subject to sudden and ramp heating boundary conditions. Heat and Mass Transfer, 46(6), pp. 621-638.

Saha, Suvash C., Patterson, John C., & Lei, Chengwang (2010) Natural convection in attics subject to instantaneous and ramp cooling boundary conditions. Energy and Buildings, 42(8), 1192-1204 .

Saha, Suvash C., Patterson, John C., & Lei, Chengwang (2010) Scaling of natural convection of an inclined flat plate : ramp cooling condition. International Journal of Heat and Mass Transfer, 53(23-24), 5156-5166 .

Saha, Suvash C., Patterson, John C., & Lei, Chengwang (2011) Scaling of natural convection of an inclined flat plate : sudden cooling condition. Journal of Heat Transfer, 133(4), 041503-041511.

Saha, Suvash C., Xu, Feng, & Molla, Md. Mamun (2011) Scaling analysis of the unsteady natural convection boundary layer adjacent to an inclined plate for Pr > 1 following instantaneous heating. Journal of Heat Transfer, 133(11), pp. 112501-112510.

Saleem, M., Hossain, Md.A., & Saha, S.C. (2012) Mixed convection flow of micropolar fluid in an open ended arc-shape cavity. Journal of Fluids Engineering - Transactions of ASME, 134(9), 091101.

Siddiqa, Sadia, Hossain, M. A., & Saha, Suvash C. (2013) Natural convection flow in a strong cross magnetic field with radiation. Journal of Fluids Engineering - Transactions of the ASME, 135(5), 051202-1.

Siddiqa, Sadia, Hossain, M. Anwar, & Saha, Suvash C. (2012) Double diffusive magneto-convection fluid flow in a strong cross magnetic field with uniform surface heat and mass flux. Journal of Heat Transfer, Transaction of ASME, 134, p. 114506.

Siddiqa, Sadia, Hossain, Md. Anwar, & Saha, Suvash C. (2013) Natural convection flow with surface radiation along a vertical wavy surface. Numerical Heat Transfer, Part A: Applications. (In Press)

Sin, Dong-Choon, Tan, Andy C. C., Kelson, Neil A., & Chadwick, Gary (2006) Blood flow in a double output centrifugal artificial heart pump as a biventricular assist device. The ANZIAM Journal, 48, C949-C962.

Sojoudi, Atta & Saha, Suvash C. (2012) Shear thinning and shear thickening non-Newtonian confined fluid flow over rotating cylinder. American Journal of Fluid Dynamics, 2(6), pp. 117-121.

Thiyahuddin, Izzat, Gu, YuanTong, Thambiratnam, David, & Gudimetla, Prasad (2012) Impact and energy absorption of road safety barriers by coupled SPH/FEM. International Journal of Protective Structures, 3(3), pp. 257-274.

Tu, W., Gu, Y.T., & Wen, P. (2012) Effective shear modulus approach for two dimensional solids and plate bending problems by meshless point collocation method. Engineering Analysis with Boundary Elements, 36(5), pp. 675-684.

Umchid, Sutee & Yarlagadda, Prasad K. (2013) Simulation-based comparison of pull-push system in motorcycle assembly line. Applied Mechanics and Materials, 241-244, pp. 1507-1513.

Wang, K.Y., Dhanasekar, Manicka, Qin, Qinghua, & Kang, Y.L. (2006) Contact analysis using Trefftz and interface finite elements. Computer Assisted Mechanics and Engineering Sciences, 13(3), pp. 457-471.

Wang, Liang, Bai, Ruixiang, & Yan, Cheng (2010) Interfacial debonding behavior of composite beam/plates with PZT patch. Composite Structures, 92(6 ), pp. 1410-1415.

145

Wang, M.C., Yan, C., Ma, L., & Hu, N. (2013) Molecular dynamics investigation on edge stress and shape transition in graphene nanoribbons. Computational Materials Science, 68, pp. 138-141.

Wang, Mingchao, Yan, Cheng, Ma, Lin, Hu, Ning, & Zhang, Guangping (2013) Numerical analysis of shape transition in graphene nanoribbons. Computational Materials Science, 75, pp. 69-72.

Wu, Y, Lui, G, & Gu, YuanTong (2005) Application of meshless local Petrov-Galerkin (MLPG) approach to simulation of incompressible flow. Numerical Heat Transfer Part B: Fundamentals: an international journal of computation and methodology, 48(5), pp. 459-475.

Xu, X., Gu, Y.T., & Yang, X. (2011) A node-based smoothed conforming point interpolation method (NS-CPIM) for elasticity problems. International Journal of Computational Methods, 8(4), pp. 801-812.

Xu, Xu, Liu, Gui-Rong, & Gu, YuanTong (2012) A novel quadratic Edge-based Smoothed Conforming Point Interpolation Method (ES-CPIM) for elasticity problems. International Journal of Computational Methods, 9(2).

Xu, Xu, Liu, Gui-Rong, Gu, YuanTong, Zhang, GuiYong, Luo, J .W., & Peng, J. X. (2010) A point interpolation method with locally smoothed strain field (PIM-LS2) for mechanics problems using triangular mesh. Finite Elements in Analysis and Design, 46(10), pp. 862-874.

Xu, Xu, Luo, Jiawei, & Gu, YuanTong (2012) Collective dynamics and control of a 3-D small-world network with time delays. International Journal of Bifurcation and Chaos in Applied Sciences and Engineering, 22(11).

Yan, Cheng, Bai, R, Yarlagadda, Prasad, & Yu, Hao (2009) Fracture behaviour of microstructured silica optical fibres. Australian Journal of Mechanical Engineering, 7(1), pp. 93-98.

Yan, Cheng, Bai, Ruixiang, Yu, Hong, Canning, John, & Law, S.S. (2010) The strength and failure of silica optical fibers. Physica Scripta, 2010(T139), pp. 1-5.

Zhan, Haifei & Gu, YuanTong (2011) Atomistic exploration of deformation properties of copper nanowires with pre-existing defects. Computer Modeling in Engineering & Sciences, 80(1), pp. 23-56.

Zhan, Haifei & Gu, YuanTong (2011) Exploration of the defect’s effect on the mechanical properties of different orientated nanowires. Advanced Materials Research, 328-30, pp. 1239-1244.

Zhan, Haifei & Gu, YuanTong (2012) Modified beam theories for nanowires considering surface/intrinsic effects and axial extension effect. Journal of Applied Physics, 111(8).

Zhan, Haifei & Gu, YuanTong (2012) Surface effects on the dual-mode vibration of <110> silver nanowires with different cross-sections. Journal of Physics D : Applied Physics, 45(46).

Zhan, Haifei & Gu, YuanTong (2012) Theoretical and numerical investigation of bending properties of Cu nanowires. Computational Materials Science, 55, pp. 73-80.

Zhan, Haifei & Gu, YuanTong (2012) A fundamental numerical and theoretical study for the vibrational properties of nanowires. Journal of Applied Physics, 111(12), p. 124303.

Zhan, Haifei, Gu, YuanTong, Feng, XiQiao, & Yarlagadda, Prasad K. (2011) Numerical exploration of plastic deformation mechanisms of copper nanowires with surface defects. Computational Materials Science, 50(12), pp. 3425-3430.

Zhan, Haifei, Gu, YuanTong, & Park, Harold S. (2012) Beat phenomena in metal nanowires, and their implications for resonance-based elastic property measurements. Nanoscale, 4(21), pp. 6779-6785.

Zhan, Haifei, Gu, YuanTong, & Yarlagadda, Prasad K. (2011) Advanced numerical characterization of mono-crystalline copper with defects. Advanced Science Letters, 4(4-5), pp. 1293-1301.

Zhang, Ying Yan & Gu, YuanTong (2013) Mechanical properties of graphene : effects of layer number, temperature and isotope. Computational Materials Science, 71(1), pp. 197-200.

Zhang, Zuoyan & Dhanasekar, Manicka (2009) Dynamics of railway wagons subjected to braking/traction torque. Vehicle System Dynamics, 47(3), pp. 285-307.

Zhu, X. F., Zhang, G. P., Yan, C., Zhu, S. J., & Sun, J. (2010) Scale-dependent fracture mode in Cu-Ni laminate composites. Philosophical Magazine Letters, 90(6), pp. 413-421.

Zhuang, Pinghui, Gu, YuanTong, Liu, Fawang, Turner, Ian, & Yarlagadda, Prasad K. (2011) Time-dependent fractional advection–diffusion equations by an implicit MLS meshless method. International Journal for Numerical Methods in Engineering.

Conference Paper

Alexander, Thomas, Wischniewski, Sascha, & Paul, Gunther (2012) Internationale perspektiven zur anwendung zukuenftiger digitaler menschmodelle. In Tagungsband zum Symposium "Digitale Ergonomie - Trends für den Einsatz digitaler Menschmodelle", Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, Dortmund, Germany, pp. 59-74.

Babaie, M., Talebizadeh, P., Saha, Suvash C., Rahimzadeh, H., Zare, Firuz, & Brown, Richard J. (2012) Residence time investigation in a co-axial dielectric barrier discharge reactor. In Gu, YuanTong, Saha, Suvash C., & Liu, Gui-Rong (Eds.) Proceedings of the 4th International Conference on Computational Methods (ICCM2012), Crowne Plaza, Gold Coast, Australia.

Bednarz, Tomasz P., Lin, Wenxian, & Saha, Suvash C. (2010) Scaling of thermo-magnetic convection. In Proceedings of the 13th Asian Congress of Fluid Mechanics, Engineers Institute of Bangladesh, Dhaka, Bangladesh, pp. 798-800.

Chintala, G.V., Gudimetla, P., Thiyahuddin, M., & Izzat, M. (2010) Reverse engineering and finite element analysis of a 3-wheeler automotive structure. In Satyanarayana, Beela & Ramji, Koona (Eds.) Proceedings of the Third International and Twenty-fourth All India Manufacturing Technology, Design and Research Conference - Global Trends and Challenges in Design and Manufacturing, AUCE (A), Visakhapatnam, India, Andhra University, Visakhapatnam, India.

El-Atm, Billy, Kelson, Neil A., & Gudimetla, Prasad V. (2008) A finite element analysis of the hydrodynamic performance of 3- and 4-Fin surfboard configurations. In Yarlagadda, Prasad K. & Gudimetla, Prasad V. (Eds.) 9th Global Congress on Manufacturing & Management, 12-14 November 2008, Gold Coast, Australia.

996

Glassock, Richard R., Hung, Jane Y., Gonzalez, Luis F., & Walker, Rodney A. (2009) Multimodal hybrid powerplant for unmanned aerial systems (UAS) robotics. In Twenty-Fourth Bristol International Unmanned Air Vehicle Systems Conference, March 30th to April 1st 2009, Bristol United Kingdom.

636

Gover, Rory, Gu, YuanTong, Gudimetla, Prasad, & Thambiratnam, David (2008) Impact characteristics of a flexible road barrier and vehicle crash response. In Aravinthan, T, Karunasena, W, & Wang, H (Eds.) Futures in Mechanics of Structures and Materials: Proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), 2 - 5 December 2008, Australia, Queensland, Toowoomba.

Gu, YuanTong (2010) An advanced implicit meshless approach for fractional partial differential equation in computational mechanics. In Howard, Ian, Teh, Kian, & Davies, Ian (Eds.) Proceedings from the 6th Australasian Congress on Applied Mechanics, Engineers Australia, Perth Convention Exhibition Centre, Perth, WA, pp. 1-8.

Gu, YuanTong & Tan, Andy (2009) Dynamics deflection analysis of nanoelectromechanical switches based on carbon nanotubes. In Proceedings of the 13th Asia-Pacific Vibration Conference, University of Canterbury, University of Canterbury, Christchurch, New Zealand, pp. 1-7.

Gu, YuanTong, Wang, Wenlong, Zhang, L.C., & Feng, X.Q. (2010) An enriched radial point interpolation method (e-RPIM) for analysis of crack tip fields. In Lu, Jane Wei-Zhen, Leung, Andrew Yee Tak, Lu, Vai Pan, & Mok, Kai Meng (Eds.) Proceedings of the 2nd International Symposium on Computational Mechanics and the 12th International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science, AIP - American Institute of Physics , Hong Kong, Macau, China , pp. 348-353.

Gu, YuanTong & Yarlagadda, Prasad K. (2010) A coupled meshless technique/molecular dynamics approach for deformation characterization of monocrystalline metal. In Lu, Jane Wei-Zhen, Leung, Andrew Yee Tak, Lu, Vai Pan, & Mok, Kai Meng (Eds.) Proceedings of the 2nd International Symposium on Computational Mechanics and the 12th International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science, American Institute of Physics, Hong Kong and Macau, China, pp. 354-359.

Gudimetla, Prasad, Kharidi, Aprameya, & Yarlagadda, Prasad, K.D.V. (2009) Simulation of delaminations in composite laminates. In Proceedings of the 6th International Conference on Precision, Meso, Micro and Nano Engineering, Coimbatore, India.

315

Gudimetla, Prasad, Thiyahuddin, Mohd, & Yarlagadda, Prasad K. (2010) Geometric and force relationships for the development of a scaled model hydraulic excavator. In Satyanarayana, Beela & Ramji, Koona (Eds.) Proceedings of the Third International and Twenty-fourth All India Manufacturing Technology, Design and Research Conference - Global Trends and Challenges in Design and Manufacturing, AUCE (A), Visakhapatnam, India, Andhra University, Visakhapatnam, India, pp. 499-504.

Helambage, Chaminda, Senadeera, Wijitha, Gu, YuanTong, & Brown, Richard J. (2012) A particle-based micromechanics approach to simulate structural changes of plant cells during drying. In Gu, YuanTong & Saha, Suvash C. (Eds.) Proceedings of 4th International Conference on Computational Methods (ICCM 2012), Crowne Plaza, Gold Coast, Australia.

Helambage, Chaminda Prasad Karunasena, Senadeera, Wijitha, Gu, YuanTong, & Brown, Richard J. (2012) A coupled SPH-DEM model for fluid and solid mechanics of apple parenchyma cells during drying. In Brandner, P.A. & Pearce, B.W. (Eds.) Proceedings of the Eighteenth Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, University of Tasmania, Launceston, TAS.

Islam, M., Karim, A., Saha, S.C., Miller, S., & Yarlagadda, P.K. (2012) Three dimensional simulation of a parabolic trough concentrator thermal collector. In Proceedings of the 50th annual conference, Australian Solar Energy Society (Australian Solar Council), Swinburne University of Technology, Melbourne, Australia.

Islam, Majedul, Karim, Azharul, Saha, Suvash C., Yarlagadda, Prasad K., Miller, Sarah, & Ullah, Ihsan (2012) Visualization of thermal characteristics around the absorber tube of a standard parabolic trough thermal collector by 3D simulation. In Gu, YuanTong & Saha, Suvash C. (Eds.) Proceedings of the 4th International Conference on Computational Methods (ICCM2012), School of Chemistry, Physics and Mechanical Engineering, Queensland University of Technology, Crowne Plaza, Gold Coast, Australia.

Kosse, Vladis (2010) Advanced mathematical modelling and experimental investigation of new torque arms for shaft-mounted drives. In Teh, Kian, Davies, Ian, & Howard, Ian (Eds.) Proceedings of the 6th Australasian Congress on Applied Mechanics, Engineers Australia , Perth, Western Australia, pp. 1-10.

Kumar, Chandan, Karim, Azharul, Saha, Suvash C., Joardder, Mohammad Uzzal Hossain, Brown, Richard J., & Biswas, Dipankar (2012) Multiphysics modelling of convective drying of food materials. In Proceedings of the Global Engineering, Science and Technology Conference, Global Institute of Science and Technology, Dhaka, Bangladesh.

Kumar, Chandan, Razzaque , Muhammed Mahbubur, & Das, Debabrata (2009) Analysis of a negatively buoyant jet. In International Conference on Mechanical Engineering ICME2009, 26-28th December, 2009, Dhaka, Bangladesh.

Li, Tong, Gu, YuanTong, Yarlagadda, Prasad K., & Oloyede, Adekunle (2012) Continuum mechanics modelling of microfilament networks with different architectures based on molecular investigation of single F-actin. In Gu, YuanTong & Saha, Suvash C. (Eds.) Proceedings of the 4th International Conference on Computational Methods, Crowne Plaza, Gold Coast, QLD.

Lin, Tian Ran, Tan, Andy, & Ma, Lin (2012) The effect of ribbing on the energy flow between two rectangular plates coupled at right angle. In Gu, YuanTong & Saha, Suvash C. (Eds.) Proceedings of the 4th International Conference on Computational Methods, Queensland University of Technology, Crowne Plaza, Gold Coast, QLD.

Malekani, Javad, Schmutz, Beat, Gu, YuanTong, Schuetz, Michael, & Yarlagadda, Prasad K. (2011) Biomaterials in orthopedic bone plates : a review. In Yarlagadda, Prasad K. (Ed.) Proceedings of the 2nd Annual International Conference on Materials Science, Metal & Manufacturing (M3 2011), Global Science and Technology Forum, Bali, Indonesia, pp. 71-77.

452

Molla, Md. Mamun, Wang, Bing-Chen, & Saha, Suvash C. (2010) Large-Eddy Simulation of physiological pulsatile non-newtonian flow in a channel with double constriction. In Proceedings of the 13th Asian Congress of Fluid Mechanics, Engineers Institute of Bangladesh, Dhaka, Bangladesh, pp. 1084-1088.

Nguyen, Trung Dung, Gu, YuanTong, Oloyede, Adekunle, & Senadeera, Wijitha (2012) Porohyperelastic analysis to explore mechanical properties of chondrocytes using numerical modeling and experiments : a finite element study. In 4th International Conference on Computational Methods (ICCM 2012), 25-28 November 2012, Crowne Plaza, Gold Coast, QLD.

Polwaththe Gallage, Hasitha Nayanajith, Gu, YuanTong, Saha, Suvash C., Senadeera, Wijitha, & Oloyede, Adekunle (2012) Numerical simulation of red blood cells' deformation using SPH method. In Gu, YuanTong & Saha, Suvash C. (Eds.) 4th International Conference on Computational Methods (ICCM 2012), 25-28 November 2012, Crowne Plaza, Gold Coast, QLD.

Polwaththe Gallage, Hasitha Nayanajith, Gu, YuanTong, Saha, Suvash C., Senadeera, Wijitha, & Oloyede, Adekunle (2012) Numerical simulation of red blood cells’ motion : a review. In Gu, YuanTong & Saha, Suvash C. (Eds.) 4th International Conference on Computational Methods (ICCM 2012), 25-28 November 2012, Crowne Plaza, Gold Coast, QLD.

Roy, A., Tan, A.C.C., & Gu, Y.T. (2011) Simulation of inplane and out of plane AE source in thin plate. In The First International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 April 2011, Queensland University of Technology, Brisbane, Qld.

118

Saha, Suvash C. (2010) Scaling analysis of unsteady natural convection boundary layer for ramp heating. In Proceedings of the 13th Asian Congress of Fluid Mechanics, Engineers Institute of Bangladesh, Dhaka, Bangladesh, pp. 767-770.

Saha, Suvash C. & Gu, YuanTong (2012) Thermo-magnetic convection of paramagnetic fluids with non-instantaneous heating. In Brandner, P.A. & Pearce, B.W. (Eds.) Proceedings of the 18th Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, University of Tasmania, Launceston, TAS.

Saha, Suvash C., Lei, Chengwang, & Patterson, John C. (2006) Natural convection in a triangular enclosure subject to periodic thermal forcing. In Proceedings of 13th International Heat Transfer Conference, Begell House Inc, Sydney Convention & Exhibition Centre, Sydney, NSW.

Saha, Suvash C., Lei, Chengwang, & Patterson, John C. (2007) On the natural convection boundary layer adjacent to an inclined flat plate subject to ramp heating. In Jacobs, Peter, McIntyre, Tim, Cleary, Matthew, Buttsworth, David, Mee, David, Clements, Rose, et al. (Eds.) Proceedings of the Sixteenth Australasian Fluid Mechanics Conference, School of Engineering, The University of Queensland, Gold Coast, Qld., pp. 121-124.

Saha, Suvash C., Lei, Chengwang, & Patterson, John C. (2007) Scaling analysis of the thermal boundary layer adjacent to an abruptly heated inclined flat plate. In Jacobs, Peter, McIntyre, Tim, Cleary, Mathew, Buttsworth, David, Mee, David, Clements, Rose, et al. (Eds.) Proceedings of the Sixteenth Australasian Fluid Mechanics Conference, School of Engineering, The University of Queensland, Gold Coast, Qld., pp. 117-120.

Saha, Suvash C., Xu, Feng, Molla, Md. Mamun, & Bednarz, Tomasz P. (2010) Scaling analysis of unsteady natural convection boundary layer for instantaneous heating. In Proceedings of the 13th Asian Congress of Fluid Mechanics, Engineers Institute of Bangladesh, Dhaka, Bangladesh, pp. 771-775.

Sin, Daniel, Tan, Andy, Kim, Young-Bok, Kelson, Neil, & Chadwick, Gary (2006) Flow estimation of a double output centrifugal artificial heart pump as a biventricular assist device by computational fluid dynamics. In Sang, R. & Dobson, J. (Eds.) Proceedings of the Australian Institute of Physics (AIP) 17th National Congress 2006, 3-8 December 2006, Brisbane, Queensland.

474

Sojoudi, A., Afshin, H., Farhanieh, B., & Saha, Suvash C. (2012) Large eddy simulation of smoke flow in a real road tunnel fire using FDS. In Gu, YuanTong, Saha, Suvash C., & Liu, Gui-Rong (Eds.) Proceedings of the 4th International Conference on Computational Methods (ICCM2012), Crowne Plaza, Gold Coast, Australia.

Sojoudi, A., Vakilimoghaddam, F., Neishabouri, R., & Saha, Suvash C. (2012) On the oscillatory behavior of transient Rayleigh Benard convection of air for 2D channel flow at moderate Rayleigh numbers. In Ao, S.I., Gelman, L., Hukins, D.W.L., Hunter, A., & Korsunsky, A. M. (Eds.) Proceedings of the World Congress on Engineering 2012 Vol III, Newswood Limited, London, U.K., pp. 1874-1878.

Thibbotuwawa, Namal, Gu, YuanTong, Oloyede, Adekunle, Senadeera, Wijitha, & Li, Tong (2012) Finite element shoulder models. In Gu, YuanTong & Saha, Suvash C. (Eds.) Proceedings of 4th International Conference on Computational Methods (ICCM 2012), Crowne Plaza, Gold Coast.

Thiyahuddin, Izzat, Gu, YuanTong, & Thambiratnam, David P. (2012) A coupled SPH/FEM analysis of portable water filled barriers. In 4th International Conference on Computational Methods (ICCM2012), 25-28 November 2012, Gold Coast, Qld.

Vakilimoghaddam, Farbod, Saha, Suvash C., Sojoudi, Atta, & Vakilimoghadam, Farnaz (2012) Finite volume approach of natural convection in a triangular enclosure with localized heating from below. In Gu, YuanTong, Saha, Suvash C., & Liu, Gui-Rong (Eds.) Proceedings of the 4th International Conference on Computational Methods (ICCM2012), Crowne Plaza, Gold Coast.

Yuan, Huan, Steinberg, Theodore, Gu, YuanTong, & Xiao, Yin (2012) Morphology-based model for predicting osteocyte-like cell line (MLO-Y4) growth process. In Gu, YuanTong & Saha, Suvash C. (Eds.) 4th International Conference on Computational Methods (ICCM 2012), 25-28 November 2012, Crowne Plaza, Gold Coast, QLD.

Zhan, Haifei & Gu, YuanTong (2011) Molecular dynamics study of dynamic buckling properties of nanowires with defects. In Kaneko, Shigehiko (Ed.) Proceedings of the 14th Asia Pacific Vibration Conference 2011, The Hong Kong Polytechnic University, The Hong Kong Polytechnic University, HongKong, pp. 1-7.

136

Zhan, Haifei, Gu, YuanTong, Yan, Cheng, & Yarlagadda, Prasad K. (2012) Influence of grain boundaries on the vibrational properties of silver nanowires. In Gu, YuanTong & Saha, Suvash C. (Eds.) 4th International Conference on Computational Methods, Crowne Plaza, Gold Coast, QLD, pp. 1-8.

Zhan, Haifei, Gu, YuanTong, & Yarlagadda, Prasad K. (2010) Atomistic numerical investigation of single-crystal copper nanowire with surface defects. In Howard, Ian, Teh, Kian, & Davies, Ian (Eds.) Proceedings of the 6th Australasian Congress on Applied Mechanics : Australian Journal of Mechanical Engineering, Engineers Australia, Perth Convention Exhibition Centre, Perth, WA, pp. 1-9.

Zong, Nannan, Dhanasekar, Manicka, Bayissa, Wirtu, & Boyd, Paul (2010) Study of wheel-rail impact at insulated rail joint through experimental and numerical methods. In Key Technologies of Railway Engineering-High-speed Railway, Heavy Haul Railway and Urban Rail Transit, China Railway Publishing House, Beijing Jiaotong University, Beijing, pp. 356-360.

Conference Item

Gover, Rory B. & Prasad, Gudimetla (2009) The role of HPC facilies in development of a novel road safety barrier. In Early Adopters PhD Workshop. (Unpublished)

Thesis

Saha, Suvash C. (2009) Natural convection adjacent to an inclined flat plate and in an attic space under various thermal forcing conditions. PhD thesis, School of Engineering and Physical Sciences.

This list was generated on Sat May 18 09:01:39 2013 EST.

Export as	RSS 1.0 Atom RSS 2.0