Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > MECHANICAL ENGINEERING (091300) > Mechanical Engineering not elsewhere classified (091399)"

Subjects classification (32824)
- Australian and New Zealand Standard Research Classification (32824)
  - ENGINEERING (090000) (4663)
    - MECHANICAL ENGINEERING (091300) (592)
      - Mechanical Engineering not elsewhere classified (091399) (208)

Group by: Authors/Creators | Item Type

Jump to: A | B | C | D | E | F | G | H | J | K | L | M | N | O | P | R | S | T | W | X | Y | Z

Number of items at this level: 208.

A

Adam, Clayton J. & Loughran, Jeffrey G. (2007) Finite element prediction of the performance of sugarcane rolling mills. International Sugar Journal, 109(1301), pp. 272-284.

470

Adam, Clayton J. & Loughran, Jeffrey G. (2004) Multi-variate analysis of frictional interaction between grooved rollers and prepared sugarcane. International Journal of the American Society of Agricultural and Biological Engineers, 47(5), pp. 1611-1618.

402

Adam, Clayton J. & Loughran, Jeffrey G. (2004) Seepage induced consolidation in permeability measurements for porous media - a finite element investigation. Journal of Porous Media, 7(2), pp. 101-117.

Adam, Clayton J. & Loughran, Jeffrey G. (2005) The effect of blanket thickness on extraction energy in sugarcane rolling mills: a finite element investigation. Biosystems Engineering, 92(2), pp. 255-263.

676

Akman, Nesrin, Kosse, Vladis, & Yarlagadda, Prasad (2005) Web Based Vibration Monitoring. In Yarlagadda, P & Narayanan, S (Eds.) Proceedings of the 1st International Conference on Manufacturing and Management - 2004 (GCMM - 2004), 8-10 December 2004, India, Vellore.

B

Bartel, Michael D., Ishii, Mamoru, Masukawa, Takuyki, Mi, Ye, & Situ, Rong (2001) Interfacial area measurements in subcooled flow boiling. Nuclear Engineering and Design, 210(1-3), pp. 135-155.

Bhowmick, Sidhartha, Molla, Md. Mamun, & Saha, Suvash (2013) Non-Newtonian natural convection flow along an isothermal horizontal circular cylinder using modified power-law model. American Journal of Fluid Dynamics. (In Press)

Borg, Robert, Kent, Geoff, & McKenzie, Neil (2006) Torque Measurement on Electrically Driven Mills. In Hogarth, D (Ed.) Proceedings of the Australian Society of Sugar Cane Technologists 2006, 2-5 May 2006, Australia, Queensland, Mackay.

Burns, David, Hay, Peter, & Steinberg, Theodore (2006) Review, Analysis, and Hazard Mitigation of the Life-Support Oxygen System on Royal Australian Air Force P-3 Orion Aircraft. Journal of ASTM International, 3(4), pp. 1-13.

C

Chan, Tommy H.T., Guo, L., & Li, Z.X. (2001) Assessment of Fatigue Damage in the Tsing Ma Bridge under Traffic Loadings by Finite Element Method. In Das, P.C., Frangopol, D.M., & Nowak, A.S. (Eds.) Current and Future Trends in Bridge Design, Construction and Maintenance, 25-26 April, Hong Kong.

Chan, Tommy H.T., Ko, Jan Ming, Lau, C.K., & Wong, K.Y. (1998) Vibration Measurement of Tsing Ma Bridge Deck Units during Erection. In Ajtab, A. & Gosselin, S. (Eds.) IABSE Symposium, Long-Span and High-Rise Structures, 2-4 Spetember, Kobe, Japan.

Chan, Tommy H.T., Li, Z.X., & Ko, Jan Ming (2001) Fatigue Analysis and Life Prediction of Bridge with Health Monitoring Data – Part II: Application. International Journal of Fatigue, 23(1), pp. 55-64.

Chan, Tommy H.T., Li, Z.X., & Ko, Jan Ming (2000) Fatigue Analysis for Bridge-deck Sections under Blocked Cycles of Traffic Loading. In Ajtab, A.E. & Gosselin, S.R. (Eds.) Nondestructive Evaluation of Highways, Utilities, and Pipelines, 7-9 Mar, Newport Beach.

Chan, Tommy H.T., Yu, Ling, Law, S.S., & Yung, T.H. (1999) Parameter Studies of Moving Force Identification in Laboratory. In Chan, S.L. & Teng, J.G. (Eds.) Advances in Steel Structures ICASS ‘99, 15-17 December, Hong Kong.

Chan, Tommy H.T., Zhou, Taiquan, Li, Z.X., & Guo, L. (2005) Hot spot stress approach for Tsing Ma bridge fatigue evaluation under traffic using finite element method. Structural Engineering and Mechanics, 19(3), pp. 261-279.

Chattopadhyay, Gopi, Hargreaves, Douglas, Larsson-Kraik, Per, Powell, John, Reddy, Venkatarami, & Wheatley, Nicholas (2005) Rail-Wheel Lubrication: A Conceptual Decision Model. In Chandru, V & Balasubramanian, P (Eds.) International Conference on Operations Research Applications in Infrastructure Development in conjunction with the 2005 Annual Convention of Operational Research Society of India (ICORAID-2005-ORSI), 27 December -29 December 2005, India, Bangalore.

Chattopadhyay, Gopi, Hargreaves, Douglas, Larsson-Kraik, Per, & Reddy, Venkatarami (2005) Analysis of Lubrication Effectiveness for Different Rail Materials. In Chandru, V & Balasubramanian, P (Eds.) International Conference on Operations Research Applications in Infrastructure Development in conjunction with 2005 Annual Convention of Operational Research Society of India (ICORAID-2005-ORSI), 27-29 December 2005, India, Bangalore.

Chattopadhyay, Gopi, Hargreaves, Douglas, Larsson-Kraik, Per, & Reddy, Venkatarami (2005) Effectiveness of Rail-Wheel Lubrication in Practice. In Mba, D & Rao, R (Eds.) Condition Monitoring and Diagnostic Engineering Management (COMADEM 2005): Proceedings of the 18th International Congress, 31 August - 2 September 2005, United Kingdom, Bedfordshire, Cranfield.

Chattopadhyay, Gopi, Hargreaves, Douglas, Larsson-Kraik, Per-Olaf, & Reddy, Venkatarami (2006) Analysis of Field Data to Develop Rail Wear Prediction Model. In Kumar, U, Parida, A, & Rao, R (Eds.) Condition Monitoring and Diagnostic Engineering Management: Proceedings of the 19th International Congress, 12 - 15 June 2006, Sweden, Lulea.

Chattopadhyay, Gopi, Hargreaves, Douglas, Larsson-Kraik, Per-Olaf, & Reddy, Venkatarami (2006) Development of Wear-Fatigue-Lubrication-Interaction Model for Cost Effective Rail Maintenance Decisions. In Mathew, J, Kennedy, J, Ma, L, Tan, A, & Anderson, D (Eds.) Proceedings of the 1st World Congress on Engineering Asset Management (WCEAM), 11 - 14 July 2006, Australia, Queensland, Gold Coast.

Chattopadhyay, Gopi, Hargreaves, Douglas, Larsson-Kraik, Per-Olaf, & Reddy, Venkatarami (2007) Modelling and Analysis of Rail Maintenance Cost. International Journal of Production Economics, 105(2), pp. 475-482.

Chattopadhyay, Gopi, Hargreaves, Douglas, Larsson-Kraik, Per-Olaf, & Reddy, Venkatarami (2006) Rail-Wheel Lubrication Practice: Framework for Lubrication Effectiveness. In Kumar, U, Parida, A, & Rao, R (Eds.) Condition Monitoring and Diagnostic Engineering Management: Proceedings of the 19th International Congress, 12 - 15 June 2006, Sweden, Lulea.

Chattopadhyay, Gopi, Hargreaves, Douglas, Larsson-Kraik, Per-Olaf, & Reddy, Venkatarami (2006) Techniques in Developing Economic Decision Model Combining Above Rail and Below Rail Assets. In Mathew, J, Kennedy, J, Ma, L, Tan, A, & Anderson, D (Eds.) 1st World Congress on Engineering Asset Management, 11 - 14 July 2006, Australia, Queensland, Gold Coast.

Chattopadhyay, Gopi, Hargreaves, Douglas, & Reddy, Venkatarami (2006) Development of Framework for Benchmarking Rail-Wheel Lubrication. In Hargreaves, D (Ed.) Proceedings of the 7th International Tribology Conference: AUSTRIB 2006: Putting Tribology to Work, 3-6 December 2006, Australia, Queensland, Brisbane.

Chattopadhyay, Gopi, Holmgren, M, Kumar, Uday, & Larsson-Kraik, Per (2005) Evaluation of Rail Inspection and Maintenance Strategies. In Mba, D & Rao, R (Eds.) Condition Monitoring and Diagnostic Engineering Management (COMADEM 2005): Proceedings of the 18th International Congress, 31 August - 2 September 2005, United Kingdom, Bedfordshire, Cranfield.

Chattopadhyay, Gopi & Khera, Bipin (2006) Cost Effective Inspection and Maintenance Strategies for Earthing System in High Voltage (HV) Installations to Achieve a Safe and Reliable Power Supply. In Kumar, U, Parida, A, & Rao, R (Eds.) Condition Monitoring and Diagnostic Engineering Management: Proceedings of the 19th International Congress, 12 - 15 June 2006, Sweden, Lulea.

Chattopadhyay, Gopi, Kumar, Dinesh, Pannu, H, & Reddy, Venkatarami (2005) Modelling and Analysis of Wear Limit for Economic Rail Replacements. In Chandru, V & Balasubramanian, P (Eds.) International Conference on Operations Research Applications in Infrastructure Development in Conjuction with the 2005 Annual Convention of Operational Research Society of India (ICORAID-2005-ORSI), 27-29 December 2005, India, Bangalore.

Chattopadhyay, Gopi, Kumar, K, Kumar, Siva, & Kumar, Uday (2005) Application of Design Changes for Improvement of System Reliability - A Case Study. In Mba, D & Rao, R (Eds.) Condition Monitoring and Diagnostic Engineering Management (COMADEM 2005): Proceedings of the 18th International Congress, 31 August - 2 September 2005, United Kingdom, Bedfordshire, Cranfield.

Chattopadhyay, Gopi, Kumar, Saurabh, Kumar, Uday, & Larsson-Kraik, Per-Olaf (2006) Estimation of Parameter for Rail Degradation. In Kumar, U, Parida, A, & Rao, R (Eds.) Condition Monitoring and Diagnostic Engineering Management: Proceedings of the 19th International Congress, 12 - 15 June 2006, Sweden, Lulea.

Chattopadhyay, Gopi, Kumar, Saurabh, Kumar, Uday, & Reddy, Venkatarami (2006) Issues and Challenges with Logistics of Rail Maintenance. In Kozan, E (Ed.) Proceedings of the Second International Intelligent Logistics Systems Conference 2006, 22-23 February 2006, Australia, Queensland, Brisbane.

Chattopadhyay, Gopi, Kumar, Uday, & Parida, A (2005) Multi Criteria Maintenance Performance Measurement: A Conceptual Model. In Mba, D & Rao, R (Eds.) Condition Monitoring and Diagnostic Engineering Management (COMADEM 2005): Proceedings of the 18th International Congress, 31 August - 2 September 2005, United Kingdom, Bedfordshire, Cranfield.

Chattopadhyay, Gopi, Larsson-Kraik, Per, & Reddy, Venkatarami (2005) Decision on Economical Rail Grinding Interval for Controlling Rolling Contact Fatigue. International Transactions in Operational Research, 12(6), pp. 545-558.

Chattopadhyay, Gopi & Rahman, Anisur (2006) Analysis of Rail Failure Data for Developing Predictive Models and Estimation of Model Parameters. In Mathew, J, Kennedy, J, Ma, L, Tan, A, & Anderson, D (Eds.) Proceedings of the 1st World Congress on Engineering Asset Management (WCEAM), 11 - 14 July 2006, Australia, Queensland, Gold Coast.

Chattopadhyay, Gopi & Rahman, Anisur (2006) Conceptual Model for Outsourcing Rail Network Asset Using Long-Term Service Contracts. In Kumar, U, Parida, A, & Rao, R (Eds.) Condition Monitoring and Diagnostic Engineering Management: Proceedings of the 19th International Congress, 12 - 15 June 2006, Sweden, Lulea.

Chattopadhyay, Gopi & Rahman, Anisur (2005) Modelling Costs and Risks to Manufacturers and Buyers for Lifetime Warranty Policies. In Mba, D & Rao, R (Eds.) Conditional Monitoring and Diagnostic Engineering Management (COMADEM 2005): Proceedings of the 18th International Congress, 31 August - 2 September 2005, United Kingdom, Bedfordshire, Cranfield.

Chattopadhyay, Gopi & Rahman, Anisur (2006) Review of Long-Term Warranty Policies. Asia-Pacific Journal of Operational Research, 23(4), pp. 453-472.

Chattopadhyay, Gopi, Rahman, Anisur, & Wah, Simon (2006) KANBAN Applied to Reduce WIP in Chipper Assembly for Lawn Mower Industries. In Kumar, U, Parida, A, & Rao, R (Eds.) Condition Monitoring and Diagnostic Engineering Management: Proceedings of the 19th International Congress, 12 - 15 June 2006, Sweden, Lulea.

Chattopadhyay, Gopi & Yun, Won Young (2006) Modeling and Analysis of Warranty Cost for 2D-Policies Associated with Sale of Second-hand Products. International Journal of Reliability and Applications, 7(1), pp. 71-77.

Chattopadhyay, Gopinath, Gibson, Gary, & Hargreaves, Doug (2008) Non-destructive testing technology to assess seal integrity of packaged products. In Yarlagadda, P & Gudimetla, P (Eds.) Proceedings of the 9th Global Congress on Manufacturing and Management (GCMM2008), 12 - 14 November 2008, Australia, Queensland, Gold Coast.

Chiffoleau, Gwenael J.A., Steinberg, Theodore A., & Veidt, Martin (2003) Ultrasonic Measurement Technique of Burning Metals in Normal and Reduced Gravity. In Steinberg, T.A., Beeson, H.D., & Newton, B.E. (Eds.) Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Tenth Volume, ASTM STP 1454. American Society for Testing and Materials.

Choi, B K, Kim, W C, Sin, Daniel, & Tan, Andy (2006) Estimation of Blood Flow in a Double Output Centrifugal Blood Pump. Journal of the Korean Society for Power System Engineering, 10(4), pp. 153-158.

Crawford, Ross, Gale, Lorne, Hargreaves, Douglas, Hills, Brian, & Yin Foo (Coller), Rebecca (2007) The Role of SAPL as a Boundary Lubricant in Prosthetic Joints. Tribology International, 40(4), pp. 601-606.

D

Davis, Lloyd E. & Bunker, Jonathan M. (2011) Altering heavy vehicle air suspension dynamic forces by modifying air lines. International Journal of Heavy Vehicle Systems (IJHVS) I, 18(1), pp. 1-17.

Davis, Lloyd E. & Bunker, Jonathan M. (2008) Characterising heavy vehicle suspensions – impulse testing results and analysis. Main Roads, Brisbane, Australia.

331

Davis, Lloyd E. & Bunker, Jonathan M. (2008) Heavy Vehicle Suspensions - Testing and Analysis: Phase 3 - eigenfrequency peak loads. Test Plan. (In Press)

917

Davis, Lloyd E. & Bunker, Jonathan M. (2007) Heavy Vehicle Suspensions – Testing and Analysis. A literature review. Department of Main Roads and the Queensland University of Technology, Brisbane, Queensland, Australia.

1,108

Davis, Lloyd E. & Bunker, Jonathan M. (2008) In-service suspension testing of heavy vehicles – update on recent test programme and proof-of-concept. In Wrigley, Cara & Lawry, Simon (Eds.) Built Environment and Engineering Postgraduate Student Conference, 10 September 2008, QUT, Brisbane.

184

Davis, Lloyd E. & Bunker, Jonathan M. (2008) In-service testing of heavy vehicle suspensions : background report for the NTC project.

172

Davis, Lloyd E. & Bunker, Jonathan M. (2008) Load-sharing in heavy vehicle suspensions : new metrics for old. (Unpublished)

629

Davis, Lloyd E. & Bunker, Jonathan M. (2009) Suspension testing of 3 heavy vehicles - dynamic wheel force analysis - Report. State of Queensland (Department of Main Roads) & Queensland University of Technology, Brisbane, Queensland, Australia.

605

Davis, Lloyd E. & Bunker, Jonathan M. (2008) Suspension testing of 3 heavy vehicles – methodology and preliminary frequency analysis. Report. State of Queensland (Department of Main Roads) & Queensland University of Technology, Brisbane, Queensland.

541

Davis, Lloyd E., Bunker, Jonathan M., & Karl, Charles (2008) Technical Feasibility Assessment of On-Board Mass-Monitoring (OBM) Devices: a) Accuracy and robustness b) Ancillary systems analysis. Full-scale testing plan.

253

230

169

Davis, Lloyd E., Bunker, Jonathan M., & Karl, Charles (2009) Technical feasibility assessment of On-Board Mass-Monitoring (OBM) devices: a)accuracy and robustness b)ancillary systems analysis : frequency analysis report.

Dephoff, Ralph & Mann, Anthony (2006) Reducing Bagasse Consumption at Harwood Mill. In Hogarth, D (Ed.) Proceedings of the Australian Society of Sugar Cane Technologists 2006, 2-5 May 2006, Australia, Queensland, Mackay.

Dunbabin, Mathew & Tan, Andy (2005) Hybrid Adaptive Control of Temperature Dependent Piezo-Actuated Flexible Structures. In Salman Leong, M, Abdul Rahman, R, & Chek Zin, T (Eds.) Proceedings of the 11th Asia-Pacific Vibration Conference 2005, 23-25 November 2005, Malaysia, Langkawi.

Dunbabin, Mathew & Tan, Andy (2005) Modelling Flexible Structures with Embedded Sensors / Actuators for Active Vibration Control. In Salman Leong, M, Abdul Rahman, R, & Chek Zin, T (Eds.) Proceedings of the 11th Asia-Pacific Vibration Conference 2005, 23-25 November 2005, Malaysia, Langkawi.

E

Edwards, Amanda P.R., Chiffoleau, Gwenael J.A., Maes, Migue J., & Steinberg, Theodore A. (2003) Instantaneous RRMI of Iron Rods in Reduced Gravity. In Steinberg, T.A., Beeson, H.D., & Newwton, B.E. (Eds.) Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Tenth Volume, ASTM STP 1454. American Society for Testing and Materials.

Emadi, Bagher, Yarlagadda, Prasad K., & Kosse, Vladis (2005) Mechanical properties of pumpkin. International Journal of Food Properties, 8(2), pp. 277-287.

F

Fillon, Michel & Hargreaves, Douglas (2006) Analysis of a Tilting Pad Journal Bearing to Avoid Pad Fluttering. Tribiology International, 40(4), pp. 607-612.

G

Gu, YuanTong & Hargreaves, Douglas J. (2007) A new transition technique for the combination of meshfree methods with other numerical methods from macro- to nanoscales. In 3rd Asian-Pacific Congress on Computational Mechanics, 3 - 6 December 2007, Kyoto, Japan.

309

Gu, YuanTong & Liu, Gui-Rong (2001) A Meshless Local Petrov-Galerkin (MLPG) method for free and forced vibration analyses for solids. Computational Mechanics, 27(3), pp. 188-198.

429

Gu, YuanTong & Liu, Gui-Rong (2001) A local point interpolation method (LPIM) for static and dynamic analysis of thin beams. Computer Methods in Applied Mechanics and Engineering, 190(42), pp. 5515-5528.

280

Gu, YuanTong, Wang, Q. X., Lam, K. Y., & Dai, K. Y. (2007) A pseudo-elastic local meshless method for analysis of material nonlinear problems in solids. Engineering Analysis with Boundary Elements, 31(9), pp. 771-782.

272

Gu, YuanTong & Yarlagadda, Prasad K.D.V. (2008) A multiscale deformation analysis for mono-crystalline copper under dynamic uniaxial tension. Advanced Materials Research, 32, pp. 241-244.

Gudimetla, Prasad V. & Yarlagadda, Prasad K. (2007) Finite element analysis of the interaction between an AWJ particle and a polycrystalline alumina ceramic. Journal of Achievements in Materials & Manufacturing Engineering, 23(1), pp. 7-14.

H

Hargreaves, Douglas, Pawlak, Zenon, & Rauckyte, Teresa (2006) Determination of Heavy Metals and Volatile Aromatic Compounds in Used Engine Oils and Sludges. Fuel, 85(4), pp. 481-485.

Hargreaves, Douglas J. & Fatchudin, E. (2005) Grease Stability Under Vibrating Conditions. In International Tribology Conference, 29 May - 2 June, Kobe, Japan.

138

Hargreaves, Douglas J. & Planitz, Anton (2006) A Review of the Wire on Capstan Test Apparatus. In Hargreaves, Douglas J., Kosse, V., & Tan, A. (Eds.) Austrib 06 - International Tribology Conference, 3 - 6 December 2006, Brisbane.

223

Hargreaves, Douglas J. & Tang, John C. H. (2005) Assessing Friction Characteristics of Liquid Lubricants. In International Tribology Conference, 29 May - 2 June, Kobe, Japan.

149

Hargreaves, Douglas J. & Tang, John C. H. (2006) Assessing friction characteristics of liquid lubricants. Tribotest, 12(4), pp. 309-319.

327

Heng, Soong, Kim, Yong-Han, Mathew, Joseph, & Tan, Andy (2006) Simulation of Progressive Degradation Data for Rolling Element Bearing Prognostics. In Hargreaves, D (Ed.) Proceedings of the 7th International Tribology Conference: AUSTRIB 2006: Putting Tribology to Work, 3-6 December 2006, Australia, Queensland, Brisbane.

Heng, Soong, Tan, Andy, Mathew, Joseph, Montgomery, Neil, Banjevic, Dragan, & Jardine, Andrew (2009) Intelligent condition-based prediction of machinery reliability. Mechanical Systems & Signal Processing, 23(N/A), pp. 1600-1614.

Heng, Soong, Zhang, Sheng, Tan, Andy, & Mathew, Joseph (2009) Rotating machinery prognostics. State of the art, challenges and opportunities. Mechanical Systems and Signal Processing, 23(3), pp. 724-739.

140

Heng, Soong Yin Aiwina, Tan, Andy C. C., Mathew, Joseph, & Yang, Bo-Suk (2007) Machine Prognosis with Full Utilization of Truncated Lifetime Data. In Gelman, L. (Ed.) 2nd World Congress on Engineering Asset Management and the 4th International Conference on Condition Monitoring, 11-14 June 2007, Harrogate, UK.

262

Hibiki, Takashi, Mi, Ye, Situ, Rong, & Ishii, Mamoru (2003) Interfacial Area Transport of Vertical Upward Bubbly Two-Phase Flow in an Annulus. International Journal of Heat and Mass Transfer, 46(25), pp. 4949-4962.

113

Hibiki, Takashi, Situ, Rong, Mi, Ye, & Ishii, Mamoru (2003) Erratum to “Modeling of bubble-layer thickness for formulation of one-dimensional interfacial area transport equation in subcooled boiling two-phase flow” [International Journal of Heat and Mass Transfer 46 (2003) 1409–1423]. International Journal of Heat and Mass Transfer, 46(18), pp. 3549-3550.

Hibiki, Takashi, Situ, Rong, Mi, Ye, & Ishii, Mamoru (2003) Experimental Study on Interfacial Area Transport in Vertical Upward Bubbly Two-Phase Flow in an Annulus. International Journal of Heat and Mass Transfer, 46(3), pp. 427-441.

135

Hibiki, Takashi, Situ, Rong, Mi, Ye, & Ishii, Mamoru (2003) Local Flow Measurements of Vertical Upward Bubbly Flow in an Annulus. International Journal of Heat and Mass Transfer, 46(8), pp. 1479-1496.

231

Hibiki, Takashi, Situ, Rong, Mi, Ye, & Ishii, Mamoru (2003) Modeling of Bubble-Layer Thickness for Formulation of One-Dimensional Interfacial Area Transport Equation in Subcooled Boiling Two-Phase Flow. International Journal of Heat and Mass Transfer, 46(8), pp. 1409-1423.

148

Hsiao, David W., Trappey, Amy, Ma, Lin, & Ho, Pei-Shun (2007) Integrate Collaborative Project and Intellectual Asset Management for IC Design Industry. In 11th International Conference on Computer Supported Cooperative Work in Design, 2007. CSCWD 2007, 26-28 April 2007, Melbourne, Victoria.

110

Hwang, Won-Woo, Kim, Dong, Tan, Andy, & Yang, Bo-Suk (2005) Condition classification of small reciprocating compressor for refrigeration using artificial neural networks and support vector machines. Mechanical Systems and Signal Processing, 19(2), pp. 371-390.

J

Joardder, Mohammad Uzzal Hossain, Uddin, Md. Shazib, & Roy, Murari Mohaon (2011) Effect of engine backpressure on the performance and emissions of a CI engine. In International Conference on Mechanical Engineering 2011 (ICME2011), 18-20 December 2011, BUET, Dhaka, Bangladesh.

Joyce, Kathy, Mann, Anthony, & Plaza, Floren (2006) Improved Estimates of Boiler Performance by Combining Empirical and CFD Models. In Hogarth, D (Ed.) Proceedings of the Australian Society of Sugar Cane Technologists 2006, 2-5 May 2006, Australia, Queensland, Mackay.

K

Kaphle, Manindra R., Tan, Andy, Thambiratnam, David, & Chan, Tommy H.T. (2010) Analysis of acoustic emission data for structural health monitoring applications. In 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 December 2010, Perth, Western Australia.

127

Kaphle, Manindra R., Tan, Andy, Thambiratnam, David, & Chan, Tommy H.T. (2011) Review: acoustic emission technique - opportunities, challenges and current work at QUT. In The First International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 April 2011, Queensland University of Technology, Brisbane, Qld.

286

Kaphle, Manindra R., Tan, Andy, Thambiratnam, David, & Chan, Tommy H.T. (2010) Structural health monitoring of bridges : source localisation in acoustic emission technique. In Yigitcanlar, Tan (Ed.) Rethinking Sustainable Development : Urban Management, Engineering, and Design. IGI Global/Engineering Science Reference, Hershey, Pa, pp. 244-253.

Kaphle, Manindra R., Tan, Andy, Thambiratnam, David, & Chan, Tommy H.T. (2011) Use of acoustic emission technique for structural health monitoring of bridges. In Chan, Tommy H.T. & Thambiratnam, David (Eds.) Structural Health Monitoring in Australia. Nova Science Publishing, United States of America, pp. 55-80. (In Press)

Kaphle, Manindra R., Tan, Andy C. C., Thambiratnam, David, & Chan, Tommy H.T. (2010) Identification of acoustic emission wave modes for accurate source location in plate-like structures. Structural Control and Health Monitoring, 19(2), pp. 187-198.

Karimi, Mahdi, Mathew, Joseph, Senadji, Bouchra, & Tan, Andy (2006) Blind deconvolution as a notch filter in detecting bearing faults corrupted by noise. Advances in Vibration Engineering, 5(2), pp. 121-132.

Karimi, Mahdi, Mathew, Joseph, & Tan, Andy (2006) Blind Deconvolution Using the Eigenvector Algorithm (Eva) Method for the Enhancement of Bearing Signal Through the Transmission Channel. In Mathew, J, Kennedy, J, Ma, L, Tan, A, & Anderson, D (Eds.) Proceedings of the 1st World Congress on Engineering Asset Management (WCEAM), 11- 14 July 2006, Australia, Queensland, Gold Coast.

Kennedy, Rosemary J., Loh, Susan, Miller, Wendy F., Summerville, Jennifer A., & Heffernan, Maree E. (2007) Same Latitude New Attitude: Reducing Greenhouse gas emissions in institional offices through positive adjustment of thermostat settings - Technical paper.

318

Kennedy, Rosemary J., Loh, Susan, Miller, Wendy F., Summerville, Jennifer A., & Heffernan, Maree E. (2007) Same latitude new attitude : reducing greenhouse gas emissions in institutional offices through positive adjustment of thermostat settings. In Australian Institute of Refrigeration, Air Conditioning and Heating Pre-loved Buildings Conference : Continuing the Push, 17 August 2007, Brisbane Convention and Exhibition Centre, Brisbane.

511

Kennedy, Rosemary J., Miller, Wendy W., Summerville, Jennifer A., Heffernan, Maree E., & Loh, Susan (2007) Thermostats, climatically responsive clothing and reducing buildings greenhouse gas emissions. In Sustainable Building South East Asia (SB07SEA), Kuala Lumpur, 5 - 7 November 2007, Malaysia, Kuala Lumpur.

455

Kent, Geoffrey Alan, Kauppila, David J., & McKenzie, Neil J. (2012) The effect of mill orientation angle on bagasse moisture content. In Bruce, Robin C. (Ed.) Proceedings of the 34th Conference of the Australian Society of Sugar Cane Technologists, Australian Society of Sugar Cane Technologists, Novotel Palm Cove Resort, Cairns, QLD.

Kim, Eric, Tan, Andy, Mathew, Joseph, & Yang, Bo-Suk (2010) Development of an online condition monitoring system for slow speed machinery. In Kiritsis, Dimitris, Emmanouilidis, Christos, Koronios, Andy, & Mathew, Joseph (Eds.) Proceedings of the 4th World Congress of Engineering Assets Management (WCEAM 2009), Springer-Verlag London Ltd, Ledra Marriott Hotel, Athens.

179

Kim, Eric, Tan, Chit, Yang, Bo-Suk, Kim, Won-Cheol, Choi, Beong-Keun, & An, Young-Su (2007) Optimum Shape Design of Rotating Shaft by ESO Method. Journal of Mechanical Science and Technology, 21(7), pp. 1039-1047.

Kim, Eric Y., Tan, Andy C.C., Yang, Bo-Suk, & Kosse, Vladis (2007) Experimental study on condition monitoring of low speed bearings : time domain analysis. In Albermani, Faris (Ed.) Fifth Australasian Congress on Applied Mechanics (ACAM 2007), 10–12 December, 2007, Brisbane, Australia.

Kim, Hack-Eun, Tan, Andy C. C., Mathew, Joseph, Kim, Eric Y. H., & Choi, Byeong-Keun (2008) Machine prognostics based on health state estimation using SVM. In Gao, Jinji, Lee, Jay, Ma, Lin, & Mathew, Joseph (Eds.) Third World Congress on Engineering Asset Management and Intelligent Maintenance Systems Conference, 27-30 October 2008, Beijing China.

741

Kim, Hack-Eun, Tan, Andy C. C., Mathew, Joseph, Kim, Eric Y. H., & Choi, Byeong-Keun (2009) Prognosis of bearing failure based on health state estimation. In Proceedings of the 4th World Congress on Engineering Asset Management, Springer, Marriott Athens Ledra Hotel, Athens.

223

Kim, Yong-Han, Kosse, Vladis, & Tan, Andy (2006) Conditional Monitoring of Low Speed Rotating Bearings - A Review. In Hargreaves, D (Ed.) Proceedings of the 7th International Tribology Conference: AUSTRIB 2006: Putting Tribology to Work, 3-6 December 2006, Australia, Queensland, Brisbane.

Kim, Yong-Han, Mathew, Joseph, Tan, Andy, & Yang, Bo-Suk (2006) Condition Monitoring of Low Speed Bearings: A Comparative Study of the Ultrasound Technique versus Vibration Measurements. In Mathew, J, Kennedy, J, Ma, L, Tan, A, & Anderson, D (Eds.) Proceedings of the 1st World Congress on Engineering Asset Management (WCEAM), 11 - 14 July 2006, Australia, Queensland, Gold Coast.

Kim, Yong-Han, Tan, Andy, & Yang, Bo-Suk (2007) Bearing Parameter Identification of Rotor-Bearing System Using Clustering-Based Evolutionary Algorithm. Structural and Multidisciplinary Optimization, 33(6), pp. 1-14.

Kim, Yong-Han, Tan, Andy, & Yang, Bo-Suk (2006) Parameter Comparison of AE Signal for Condition Monitoring of Low Speed Bearings. In Hargreaves, D (Ed.) Proceedings of the 7th International Tribology Conference: AUSTRIB 2006: Putting Tribology to Work, 3-6 December 2006, Australia, Queensland, Brisbane.

Ko, Jan Ming, Ni, Yi-Qing, & Chan, Tommy H.T. (1999) Dynamic Monitoring of Structural Health in Cable-Supported Bridges. In Liu, S.C. (Ed.) Smart Structures and Materials 1999: Smart Systems for Bridges, and Highways, 1-2 March 1999, Newport Beach, California, USA.

Ko, Jan Ming, Ni, Yi-Qing, & Chan, Tommy H.T. (2000) Feasibility of Damage Detection of Tsing Ma Bridge using Vibration Measurements. In Ajtab, A.E. & Gosselin, S.R. (Eds.) Nondestructive Evaluation of Highways, Utilities, and Pipelines, 7-9 Mar, Newport Beach.

Kosse, Vladis (2008) Manufacturing challenges with fabrication of large size mechanical harmonic drives. In Yarlagadda, Prasad & Gudimetla, Prasad (Eds.) Proceeding of the 9th Global Congress on Manufacturing and Management, 12-14 November 2008, Holiday Inn, Gold Coast, Queensland.

Kosse, Vladis (2010) Revealing design flaws at different stages of product development using anticipatory failure determination (AFD TM) technique. In Teh, Kian, Davies, Ian, & Howard, Ian (Eds.) Proceedings of the 6th Australasian Congress on Applied Mechanics, Engineers Australia, Peth, W.A, pp. 1-9.

128

Kosse, Vladis (2007) Using Hysteresis Loop and Torsional Shock Loading to Assess Damping and Efficiency of Cyclodrives. In Randall, B. (Ed.) 14th International Congress on Sound and Vibration (ICSV14), 9-12 July 2007, Cairns, Qld.

263

Kosse, Vladis & Senadeera, Wijitha (2011) Innovative approaches to teaching engineering drawing at tertiary institutions. International Journal of Mechanical Engineering Education, 39(4), pp. 323-333.

Kosse, Vladis & Tan, Andy (2006) Development of Testing Facilities for Verification of Machine Condition Monitoring Methods for Low Speed Machinery. In Mathew, J, Kennedy, J, Ma, L, Tan, A, & Anderson, D (Eds.) Proceedings of the 1st World Congress on Engineering Asset Management (WCEAM), 11 - 14 July 2006, Australia, Queensland, Gold Coast.

Kulkarni, Ambarish, Kapoor, Ajay, Kosse, Vladis, & Iyer, Mahalinga (2010) Novel car carrier design : prevention of falls from heights. Accident Analysis & Prevention.

L

Law, S.S., Chan, Tommy H.T., & Zeng, Q.H. (1995) Identification of Vehicle-Bridge Interactive Forces from measured Bridge Responses: Theoretical Studies. In ASME Fifteenth Biennial Conference on Mechanical Vibration and Noise, 17-20 September, Boston, Massachusetts.

Law, S.S., Chan, Tommy H.T., Zhu, Q.X., & Zeng, Q.H. (2001) Regularization in Moving Force Identification. Journal of Engineering Mechanics of ASCE, 127(2), pp. 136-148.

Lee, Tae-Ho, Situ, Rong, Hibiki, Takashi, Park, Hyun-Sik, Ishii, Mamoru, & Mori, Michitsugu (2009) Axial developments of interfacial area and void concentration profiles in subcooled boiling flow of water. International Journal of Heat and Mass Transfer, 52(1-2), pp. 473-487.

Li, Z.X., Chan, Tommy H.T., & Ko, Jan Ming (2002) Determination of Effective Stress range and its Application on Fatigue Stress Assessment of Existing Bridges. International Journal of Solids and Structures, 39(9), pp. 2401-2417.

Li, Z.X., Chan, Tommy H.T., & Ko, Jan Ming (2002) Evaluation of typhoon induced fatigue damage for Tsing Ma Bridge. Engineering Structures, 24(8), pp. 1035-1047.

Li, Z.X., Chan, Tommy H.T., & Ko, Jan Ming (2001) Fatigue Analysis and Life Prediction of Bridge with Health Monitoring Data – Part I: Theory and Strategy. International Journal of Fatigue, 23(1), pp. 45-53.

Li, Z.X., Chan, Tommy H.T., & Ko, Jan Ming (2000) Health Monitoring and Fatigue Damage Assessment of the Bridge Deck Sections. In Ajtab, A.E. & Gosselin, S.R. (Eds.) Nondestructive Evaluation of Highways, Utilities, and Pipelines, 7-9 Mar, Newport Beach.

Li, Z.X., Chan, Tommy H.T., Ko, Jan Ming, Lau, C.K., & Wong, K.Y. (2000) Fatigue Evaluation and Detection of Critical Fatigue Location for Bridge Deck Sections. In Workshop on Research and Monitoring of Long Span Bridges, 26-28 April, Hong Kong.

Li, Z.X., Chan, Tommy H.T., & Zhou, Taiquan (2005) Accumulative damage near crack tip for welded bridge members : fatigue life determination. Theoretical and Applied Fracture Mechanics, 43(2), pp. 245-260.

Li, Z.X., Ko, Jan Ming, Chan, Tommy H.T., & Ni, Yi-Qing (1999) Determination of Section Properties of Complicated Structural Members. In Chan, S.L. & Teng, J.G. (Eds.) Advances in Steel Structures ICASS ‘99, 15-17 December, Hong Kong.

Li, Z.X., Li, A.Q., Chan, Tommy H.T., Guo, L., & Zhou, Taiquan (2003) Finite element modeling for health monitoring and condition assessment of long-span bridges. Journal of Southeast University (Natural Science Edition) - In Chinese, 33(5), pp. 562-572.

Lin, Tian Ran (2008) A study of modal characteristics and the control mechanism of finite periodic and irregular ribbed plates. The Journal of the Acoustical Society of America, 123(2), pp. 729-737.

Lin, Tian Ran, Farag, Nabil H., & Pan, Jie (2005) Evaluation of frequency dependent rubber mount stiffness and damping by impact test. Applied Acoustics, 66(7), pp. 829-844.

Lin, Tian Ran & Mechefske, Chris K. (2008) Input mobility of ship structures. In Mahendran, Mahen (Ed.) 5th International Conference on Thin-walled Structures : ICTWS 2008 Innovations in Thin-walled Structures, 18-20 June 2008, Brisbane.

379

Lin, Tian Ran & Mechefske, Chris K. (2008) Vibration control of ship structures. In Mahendran, Mahen (Ed.) 5th International Conference on Thin-walled Structures, 18-20 June 2008, Brisbane.

650

Lin, Tian Ran, O'Shea, Peter J., & Mechefske, Chris K. (2008) Modal Sound Radiation from Finite Cylindrical Shells. In 16th International Society for Magnetic Resonance in Medicine, 3-9, May 2008, Toronto, Canada.

Lin, Tian Ran & Pan, Jie (2006) A closed form solution for the dynamic response of finite ribbed plates. The Journal of the Acoustical Society of America, 119(2), pp. 917-925.

Lin, Tian Ran, Tan, Andy, Howard, Ian, Pan, Jie, Crosby, Peter, & Mathew, Joseph (2011) Development of a diagnostic tool for condition monitoring of rotating machinery. In ICOMS Asset Management Conference Proceedings, Asset Management Council Limited, Gold Coast Convention and Exhibition Centre, Queensland, pp. 1-9.

739

Liu, Gui-Rong & Gu, YuanTong (2000) Meshless local Petrov–Galerkin (MLPG) method in combination with finite element and boundary element approaches. Computational Mechanics, 26(6), pp. 536-546.

375

Liu, Gui-Rong & Gu, YuanTong (2005) An introduction to meshfree methods and their programming. 1, 1. Springer, Berlin.

Liu, Sheng, Huang, Han, & Gu, YuanTong (2011) A nanoscratch method for measuring hardness of thin films. International Journal of Nanomanufacturing, 7(5/6), pp. 427-435.

Lowe, David, Tan, Andy, & Brown, Richard J. (2010) Diesel engine condition monitoring and simulated diesel knock. In Proceedings of 5th World Congress on Applied Mechanics, Engineers Australia, Brisbane, QLD.

Lynn, David Benjamin, Steinberg, Theodore, Sparks, Kyle, & Stoltzfus, Joel (2009) Defining the flammability of cylindrical metal rods through characterization of the thermal effects of the ignition promoter. Journal of ASTM International, 6(7).

156

M

Ma, Lin (2007) Condition monitoring in engineering asset management. In Asia Pacific Vibration Conference, 6-9 August 2007, Sapporo, Japan.

2,389

Ma, Lin, Mathew, Joseph, & Pudney, Steven (2005) Asset Management Decisions - Literature Review and Analysis. In Harrop, T (Ed.) Proceedings of International Conference of Maintenance Societies 2005, 31 May - 2 June 2005, Australia, Tasmania, Hobart.

Ma, Lin, Mathew, Joseph, & Sun, Yong (2006) Determination of Optimal Preventive Maintenance Strategy for Serial Production Lines. In Mathew, J, Kennedy, J, Ma, L, Tan, A, & Anderson, D (Eds.) Proceedings of the 1st World Congress on Engineering Asset Management (WCEAM), 11- 14 July 2006, Australia, Queensland, Gold Coast.

Ma, Lin, Mathew, Joseph, & Sun, Yong (2006) The Interactive Hazards of Components in a System after Repairs - a Mathematical Formulation. In Mathew, J, Kennedy, J, Ma, L, Tan, A, & Anderson, D (Eds.) Proceedings of the 1st World Congress on Engineering Asset Management (WCEAM), 11- 14 July 2006, Australia, Queensland, Gold Coast.

Ma, Lin, Mathew, Joseph, Sun, Yong, Wang, Wenyi, & Zhang, Sheng (2006) Mechanical Systems Hazard Estimation Using Condition Monitoring. Mechanical Systems and Signal Processing, 20(5), pp. 1189-1201.

Ma, Lin, Mathew, Joseph, Sun, Yong, & Zhang, Sheng (2006) An Analytical Model for Interactive Failures. Reliability Engineering and System Safety, 91(5), pp. 495-504.

Ma, Lin, Mathew, Joseph, Sun, Yong, & Zhang, Sheng (2005) Determination of preventive maintenance lead time using hybrid analysis. International Journal of Plant Engineering and Management (国际设备工程与管理), 10(1), pp. 13-18.

Ma, Lin, Mathew, Joseph, Sun, Yong, & Zhang, Sheng (2005) A Methodology for Analysing Interactive Failures of Components. In Leong, M, Rahman, R, & Zin, T (Eds.) Proceedings of the 11th Asia-Pacific Vibration Conference (APVC Proceedings, 2005), 23 November - 25 November 2005, Malaysia, Langkawi.

Ma, Lin, Mathew, Joseph, & Zhang, Sheng (2005) Some Recent Advances on Condition Monitoring Research. In Bento Coelho, J, Boubezari, M, Alarcao, D, & Neves, M (Eds.) Proceedings of the 12th International Congress on Sound and Vibration, 11 - 14 July 2005, Portugal, Lisbon.

Ma, Lin & Sun, Yong (2006) An Approach to Management Planning for New Assets. In Dessouky, M (Ed.) Proceedings of the 36th International Conference on Computers and Industrial Engineering, 20 - 23 June 2006, People's Republic of China, Taiwan, Taipei.

Ma, Lin & Sun, Yong (2006) Effects of Failure Interactions on Repairable Systems. In Dessouky, M (Ed.) Proceedings of the 36th International Conference on Computers and Industrial Engineering, 20 - 23 June 2006, People's Republic of China, Taiwan, Taipei.

Ma, Lin, Sun, Yong, & Mathew, Joseph (2007) Effects of Preventive Maintenance on the reliability of production lines. In 2007 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2007), 3-5 December 2007, Singapore.

256

Ma, Lin, Sun, Yong, Zhang, Liqun, & Zhang, Sheng (2008) Smarter and more scientific: A decision support system for integrated asset management. In Sondalini, M (Ed.) Proceedings of the ICOMS Asset Management Conference 2008, 26 -29 May 2008, Australia, Western Australia, Freemantle.

Madhani, Jehangir T., Kwek, Leonard M. K., Brown, Richard J., Kelson, Neil A., & Frost, Ray L. (2005) Investigating the flow field of a Stormwater Quality Improvement Device. In Environmental Engineering & Sustainability (EES), 18 - 19 July 2005, Power House, Sydney.

444

N

Niu, Gang, Han, Tian, Yang, Bo-Suk, & Tan, Andy C. C. (2007) Multi-agent decision fusion for motor fault diagnosis. Mechanical Systems and Signal Processing, 21(3), pp. 1285-1299.

428

O

Olofinjana, Ayo, Tesfamichael, Tuquabo, & Bell, John M. (2005) Chemical modification and the attending surface hardness of low alloy steel through medium energy nitrogen ion implantation. Journal of Materials Processing Technology, 164-165, pp. 905-910.

Osborne, B & Steinberg, Theodore (2006) An Experimental Investigation into Liquid Jetting Modes and Break-up Mechanisms Conducted in a New Reduced Gravity Facility. Microgravity - Science and Technology, 18(3-4), pp. 57-61.

P

Pai, R. S., Pai, Raghuvir B., Majumdar, B.C., & Hargreaves, Douglas J. (2006) Comparison of static performance characteristics of 3-Axial groove water lubricated journal bearings: Reynolds and JFO models. In Hargreaves, Douglas J., Kosse, V., & Tan, A. (Eds.) Austrib 06 - International Tribology Conference, 3 - 6 December 2006, Brisbane.

200

Pawlak, Zenon, Kosse, Vladis, Oloyede, Adekunle, Rauckyte, Teresa, Kopkowski, Andrzej, Hargreaves, Douglas J., et al. (2006) The Antiwear Effectiveness of Micellar Zinc Phosphates and Copper Oxide Through Friction-Induced Cross-Linking. In Hargreaves, Douglas J., Kosse, V., & Tan, A. (Eds.) Austrib 06 - International Tribology Conference, 3 - 6 December 2006, Brisbane.

623

Pienaar, Christine, Chiffoleau, Gwenael, Follens, Lana, Martens, Johan, Kirschhock, Christine, & Steinberg, Theodore (2007) Effect of Gravity on the Gelation of Silica Sols. Chemistry of Materials, 19(4), pp. 660-664.

Plappilimadam, Sreejith & Yarlagadda, Prasad (2005) Challenges and Goals in Scaffolds for Tissue Engineering. In Yarlagadda, P & Narayanan, S (Eds.) Proceedings of the 1st International Conference on Manufacturing and Management - 2004 (GCMM - 2004), 8-10 10 December 2004, India, Vellore.

R

Rahman, Anisur & Chattopadhyay, Gopinath (2007) Soil Factors Behind Inground Decay of Timber Poles : Testing and Interpretation of Results. IEEE Transactions on Power Delivery, 22(3), pp. 1897-1903.

268

Rao, D. S., Pai, R., & Hargreaves, Douglas J. (2006) Static characteristics of tri-taper journal bearing. In Hargreaves, Douglas J., Kosse, V., & Tan, A. (Eds.) Austrib 06 - International Tribology Conference, 3 - 6 December 2006, Brisbane.

235

Reddy, Venkatarami, Chattopadhyay, Gopinath, & Hargreaves, Douglas J. (2006) Analysis Of Rail Wear Data For Evaluation Of Lubrication Performance. In Hargreaves, Douglas J., Kosse, V., & Tan, A. (Eds.) Austrib 06 - International Tribology Conference, 3 - 6 December 2006, Brisbane.

767

Ridley, Peter & Stevenson, Bradley (2005) Automated Vehicle Stability Control for Articulated Vehicles. In Sammut, C (Ed.) Proceedings of the Australasian Conference on Robotics and Automation 2005, 5 - 7 December 2005, Australia, New South Wales, Sydney.

S

Senadeera, Wijitha & Kalugalage, Irosha (2004) Performance evaluation of an affordable solar dryer for crops. In Biennial Conference of the Society of Engineers in Agriculture 2004, 14-16 September, Dubbo, Australia.

456

Senadeera, Wijitha & Senanayaka, Dumindra (2007) Economic development through solar drying technologies. Daily News of Sri-lanka.

325

Siegenthaler, Alfred & Madhani, Jehangir T. (1998) Experimental Verification of Departure from-Rankine- Hugoniot Behaviour in Weak Mach Reflection. In 13th Australasian Fluid Mechanics Conference, 13-18 December 1998, Monash University, Melbourne, Australia.

503

Siegenthaler, Alfred & Madhani, Jehangir T. (2001) Outline of a Theory of non-Rankine-Hugoniot Shock Wave in Weak Mach Reflection. In 14th Australasian Fluid Mechanics Conference, 10-14 December 2001, Adelaide University, Adelaide, Australia.

905

Situ, Rong, Brown, Richard J., & Loberto, Anthony (2009) Velocity and Concentration field of discharge from a boat propeller. In Szmyd, Janusz S., Spalek, J., & Kowalewski, T. A. (Eds.) ExHFT-7 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics Proceedings, AGH University of Science and Technology Press, Krakow, Poland, p. 991.

Situ, Rong, Hibiki, Takashi, Ishii, Mamoru, & Mori, Michitsugu (2005) Bubble Lift-off Size in Forced Convective Subcooled Boiling Flow. International Journal of Heat and Mass Transfer, 48(25-26), pp. 5536-5548.

341

Situ, Rong, Hibiki, Takashi, Sun, Xiaodong, Mi, Ye, & Ishii, Mamoru (2004) Axial development of subcooled boiling flow in an internally heated annulus. Experiments in Fluids, 37(4), pp. 589-603.

178

Situ, Rong, Hibiki, Takashi, Sun, Xiaodong, Mi, Ye, & Ishii, Mamoru (2004) Flow structure of subcooled boiling flow in an internally heated annulus. International Journal of Heat and Mass Transfer, 47(24), pp. 5351-5364.

220

Situ, Rong, Ishii, Mamoru, Hibiki, Takashi, Tu, Jiyuan, Yeoh, Guan Heng, & Mori, Michitsugu (2008) Bubble departure frequency in forced convective subcooled boiling flow. International Journal of Heat and Mass Transfer, 51(25-26), pp. 6268-6282.

Situ, Rong, Mi, Ye, Ishii, Mamoru, & Mori, Michitsugu (2004) Photographic Study of Bubble Behaviors in Forced Convection Subcooled Boiling. International Journal of Heat and Mass Transfer, 47(17-18), pp. 3659-3667.

343

Situ, Rong, Mi, Ye, Ishii, Mamoru, & Mori, Michitsugu (2001) Photographic Study of Bubble Behaviors in Subcooled Boiling. In Panchal, C.B. & Bergman, T. (Eds.) 35th National Heat Transfer Conference, 10-12th June, 2001, Anaheim, California, USA.

Situ, Rong, Tu, Jiyuan, Yeoh, Guan Heng, Hibiki, Takashi, Ishii, Mamoru, & Mori, Michitsugu (2007) Dimensionless analysis of bubble departure frequency in forced convective subcooled boiling flow. In Ito, Takahiko, Hassan, Yassin, Kang, Rixin, & Stoll, Uwe (Eds.) 15th International Conference on Nuclear Engineering, 22-26 April 2007, Nagoya, Japan.

Steinberg, Ted (2007) Reduced Gravity Testing and Research Capabilities at Queensland University of Technology's New 2.0 Second Drop Tower. In 16th Australasian Fluid Mechanics Conference (AFMC), 3-7 December, 2007, Gold Coast, Queensland.

137

Steinberg, Theodore, Suvorovs, Terese, Ward, Nicholas, & Wilson, Richard (2006) Effect of Sample Geometry on Regression Rate of the Melting Interface for Carbon Steel Burned in Oxygen. Journal of ASTM International, 3(4), pp. 1-9.

Steinberg, Theodore, Suvorovs, Terese, & Ward, Nick (2006) An Investigation of Regression Rate of the Melting Interface for Iron Burning in Normal Gravity and Reduced Gravity. Journal of ASTM International, 3(4), pp. 1-12.

Sun, Yong, Ma, Lin, & Mathew, Joseph (2007) Prediction of system reliability for multiple component repairs. In 2007 IEEE International Conference on Industrial Engineering and Engineering Management, 2-5 December 2007, Singapore.

167

Suvorovs, Terese, Dewit, John R., Osborne, Barnaby P., & Steinberg, Theodore A. (2004) Investigation of Burning Aluminum in Oxygen-Enriched Atmospheres through Microanalysis Techniques. Journal of ASTM International, 1(8).

Suvorovs, Terese, Ward, Nicholas, Steinberg, Theodore, & Wilson, Richard (2007) Effect of geometry on the melting rates of iron rods burning in high pressure oxygen. Journal of ASTM International, 4(4).

Suvorovs, Terese, Ward, Nicholas, Steinberg, Theodore, & Wilson, Richard (2007) Statistical Evaluation of Promoted Ignition Test Data. Journal of ASTM International, 4(7), pp. 1-13.

T

Tan, Andy, Heng, Aiwina Soong Yin, & Mathew, Joseph (2009) Condition-based prognosis of machine health. In Proceedings of the 13th Asia-Pacific Vibration Conference, University of Canterbury, University of Canterbury, Christchurch, pp. 1-10.

W

Wang, J.Y., Ni, Yi-Qing, Ko, Jan Ming, & Chan, Tommy H.T. (2002) Damage detection of long-span cable-supported bridges. In Mufti, A.A. (Ed.) 1st International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, Winnipeg, Canada.

Wang, Ruizi, Ma, Lin, Yan, Cheng, & Mathew, Joseph (2012) Condition deterioration prediction of bridge elements using Dynamic Bayesian Networks (DBNs). In 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering, IEEE Explore, University of Electronic Science and Technology, Chengdu, Sichuan. (In Press)

Wang, Wenlong, Gu, YuanTong, & Zhang, L-C. (2008) Crack analysis using an improved meshless technique with irregular nodes. Advanced Materials Research, 32, pp. 263-266.

Ward, Nicholas & Steinberg, Theodore (2007) Geometry of the Melting Interface in Cylindrical Metal Rods under Microgravity Conditions. Comptes Rendus Mecanique (Academie des Sciences), 335(5-6), pp. 342-350.

Wee, Thiam Chai Benjamin & Yarlagadda, Prasad (2005) Developments of an Innovative Vending Machine through Innovation and Creativity. In Yarlagadda, P & Narayanan, S (Eds.) Proceedings of the 1st International Conference on Manufacturing and Management - 2004 (GCMM - 2004), 8-10 December 2004, India, Vellore.

Wilson, Lance J., Hargreaves, Douglas J., Clegg, Richard E., & Powell, John (2008) Methodology for measurement of lubricant decay rate for rail lubricants. In NORDTRIB 2008 : 13th Nordic Symposium on Tribology, 10-13 June 2008, Tampere, Finland. (Unpublished)

317

Wilson, Lance J., Hargreaves, Douglas J., Clegg, Richard E., & Powell, John (2006) Modifications of a Rail/Wheel Wear Simulator to Measure Rail Curve Lubricant Performance. In Hargreaves, Doulas J., Kosse, Vladis, & Tan, Andy (Eds.) Austrib 06 - International Tribology Conference, 3 - 6 December 2006, Brisbane.

382

X

Xia, H., Xu, Y.L., & Chan, Tommy H.T. (2000) Dynamic interaction of long suspension bridges with running trains. Journal of Sound and Vibration, 237(2), pp. 263-280.

Y

Yan, Cheng, Mai, Yiu-Wing, Yuan, Qiang, Ye, Lin, & Sun, Jun (2001) Effects of substrate materials on fracture toughness measurement in adhesive joints. International Journal of Mechanical Sciences, 43(9), pp. 2091-2102.

427

Yarlagadda, P.K. & Rao, K.P. (1995) Neural network approach to flow stress evaluation in hot deformation. Journal of Materials Processing Technology, 53(3-4), pp. 552-566.

Yarlagadda, Prasad K. (2002) Feasibility Studies On The Development And Evaluation Of Mould Inserts For Injection Moulding. In Taraman, K. & Salem, H. (Eds.) 2002 Pacific Conference on Manufacturing, Dec. 2002, Bankok, Thailand.

265

Yarlagadda, Prasad K., Rao, K.P., & Hawbolt, E. Bruce (1996) Hot Deformation Studies On A Low-Carbon Steel: Part 2 - An Algorithm For The Flow Stress Determination Under Varying Process Conditions. Journal of Materials Processing Technology, 56(1-4), pp. 908-917.

Yarlagadda, Prasad K., Rao, K.P., & Hawbolt, E. Bruce (1998) Study of fractional softening in multi-stage hot deformation. Journal of Materials Processing Technology, 77(1-3), pp. 166-174.

Yarlagadda, Prasad K. & Stoynov, Lubomir A. (2003) Joining of engineering thermoplastics by concentrated beam insolation — a feasibility study. Journal of Materials Processing Technology, 138(1-3), pp. 67-74.

Yarlagadda, Prasad K. & Wee, Lee Kien (2006) Design, development and evaluation of 3D mold inserts using a rapid prototyping technique and powder-sintering process. International Journal of Production Research, 44(5), pp. 919-938.

Yu, Yi, Ma, Lin, Gu, YuanTong, & Zhou, Yifan (2008) Confidence interval of lifetime distribution using bootstrap method. In The Third World Congress on Engineering Asset Management and Intelligent Maintenance Systems Conference, 27-30 October 2008, Beijing, China.

517

Yu, Yi, Ma, Lin, Sun, Yong, & Gu, YuanTong (2010) Remaining useful life prediction using elliptical basis function network and Markov Chain. In Ardil, Cemal (Ed.) World Academy of Science, Engineering and Technology, Venice, pp. 800-804.

Z

Zhang, Sheng, Hodkiewicz, Melinda, Ma, Lin, & Mathew, Joseph (2006) Machinery condition prognosis using multivariate analysis. In The Inaugural World Congress on Engineering Asset Management 2006, 11-14 July, Gold Coast, Australia.

Zhang, Sheng, Ma, Lin, & Mathew, Joseph (2005) Vibration feature analysis for rolling element bearing diagnosis using Bayesian neural networks. In Leong, Salman (Ed.) Asia Pacific Vibration Conference 2005, 22-25 November 2005, Langkawi Malaysia.

Zhang, Sheng, Ma, Lin, Sun, Yong, & Mathew, Joseph (2007) Asset health reliability estimation based on condition data. In World Congress on Engineering Asset Management, 11-14 June 2007, Harrogate, England.

1,477

Zhang, Sheng, Mathew, Joseph, Ma, Lin, & Sun, Yong (2006) Identification of optimal wavelet packets for machinery fault diagnosis using Bayesian neural networks. Advances in Vibration Engineering, 5(2), pp. 155-162.

Zhang, Sheng, Mathew, Joseph, Ma, Lin, & Sun, Yong (2004) Identifying optimal combination of wavelet packet bases for fault classification using Bayesian neural networks. In Vyas, N. S., Rao, J. S., Mathew, J., Ma, L., & Raghuram, V. (Eds.) VETOMAC-3 and ACSIM-2004, 6-9 December, New Delhi.

Zhang, Sheng, Mathew, Joseph, Ma, Lin, & Sun, Yong (2004) A novel approach for integrated fault diagnosis based on wavelet packet transform. Acoustics Australia, 32(1), pp. 5-8.

Zhang, Sheng, Mathew, Joseph, Ma, Lin, Sun, Yong, & Mathew, Avin D. (2004) Statistical condition monitoring based on vibration signals. In Vyas, N. S., Rao, J. S., Mathew, Joseph, Ma, Lin, & Raghuram, V. (Eds.) VETOMAC-3 & ACSIM-2004, 6-9 December 2004, New Delhi, India.

1,226

Zhou, Taiquan, Guo, L., & Chan, Tommy H.T. (2002) Fatigue Evaluation of Tsing-Ma Bridge subjected to Traffic Loading (in Chinese). Earthquake Engineering and Engineering Vibration, 22(5), pp. 24-29.

Zhou, Yifan, Ma, Lin, & Mathew, Joseph (2008) A non-gaussian continuous state space model for asset degradation. In Gao, Jinji, Lee, Jay, Ni, Jun, Ma, Lin, & Mathew, Joseph (Eds.) 3rd World Congress on Engineering Asset Management and Intelligent Maintenance Systems Conference, 27th-30th October 2008, Beijing, China.

213

Zhou, Yifan, Ma, Lin, Sun, Yong, & Mathew, Joseph (2008) Latent degradation indicator estimation using condition monitoring information. In Gao, Jinji, Lee, Jay, Ni, Jun, Ma, Lin, & Mathew, Joseph (Eds.) 3rd World Congress on Engineering Asset Management and Intelligent Maintenance Systems Conference, 27-30 October 2008, Beijing, China.

174

This list was generated on Sat May 18 09:35:22 2013 EST.

Export as	RSS 1.0 Atom RSS 2.0