Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > INTERDISCIPLINARY ENGINEERING (091500)"
|Up a level|
- Subjects classification (47368)
- Australian and New Zealand Standard Research Classification (47368)
- ENGINEERING (090000) (6549)
- INTERDISCIPLINARY ENGINEERING (091500) (260)
- ENGINEERING (090000) (6549)
- Australian and New Zealand Standard Research Classification (47368)
Group by: Authors/Creators | Item Type
Number of items at this level: 52.
Ahmed, S., Rasul, M.G., Martens, W., & Brown, R.J. (2009) Sustainable reuse of storm/waste-water resources : a review on solar photocatalytic purification processes. In The Central Region Engineering Conference (CREC 2009), 14-15 August 2009, Central Queensland Univeristy, Rockhampton, QLD.
Bayissa, Wirtu & Haritos, Nicholas (2007) Damage identification in plate-like structures using bending moment response power spectral density. Structural Health Monitoring, 6(1), pp. 5-24.
Bayissa, Wirtu, Haritos, Nicholas, & Thelandersson, S. (2008) Vibration-based structural damage identification using wavelet transform. Mechanical Systems and Signal Processing, 22(5), pp. 1194-1215.
Bodisco, Timothy A., Reeves, Robert W., Situ, Rong, & Brown, Richard J. (2011) Bayesian models for the determination of resonant frequencies in a DI diesel engine. Mechanical Systems and Signal Processing, 26, pp. 305-314.
Chanson, Hubert, Brown, Richard, & Ferris, John (2004) Hydrodynamic and Ecological Study of a Sub-tropical Estuary in Queensland. In Mossa, Michele, Yasuda, Youichi, & Chanson, Hubert (Eds.) Fluvial, Environmental & Coastal Developments in Hydraulic Engineering. Taylor & Francis, Leiden, The Netherlands, pp. 133-149.
Chanson, Hubert, Brown, Richard J., Ferris, John, & Warburton, Kevin (2003) A Hydraulic, Environmental and Ecological Assessment of a Sub-tropical Stream in Eastern Australia: Eprapah Creek, Victoria Point QLD on 4 April 2003.
Cokley, John, Rankin, William, McAuliffe, Marisha B., Heinrich, Pauline, & Hanrick, Phillipa (2016) The ultimate edge: The case for planning media for sustaining space communities. In Taylor, Andrew, Carson, Dean, Ensign, Prescott, Huskey, Lee, & Rasmussen, Rasmus (Eds.) Settlements at the Edge: Remote Human Settlements in Developed Nations. Edward Elgar Publishing Ltd, Cheltenham, pp. 405-426.
Cox, Francis, Bodisco, Timothy A., & Peeler, David (2014) Continuous remote emissions monitoring – the lynchpin for air quality management. In Proceedings of the 12th AusIMM Underground Operators' Conference, The Australasian Institute of Mining and Metallurgy, AusIMM, Adelaide, South Australia, pp. 137-142.
Desha, Cheryl & Hargroves, Karlson (2010) Surveying the state of higher education in energy efficiency, in Australian engineering curriculum. Journal of Cleaner Production, 18(7), pp. 652-658.
Edworthy, Judy, Hellier, Elizabeth, Titchener, Kirsteen, Naweed, Anjum, & Roels, Richard (2011) Heterogeneity in auditory alarm sets makes them easier to learn. International Journal of Industrial Ergonomics, 41(2), pp. 136-146.
English, Lyn D. (2008) Interdisciplinary problem solving : a focus on engineering experiences. In Goos, Merrilyn, Brown, Ray, & Makar, Katie (Eds.) Mathematics Education Research Group of Australia Conference, 28 June - 1 July 2008, Brisbane, Qld, Australia.
Fawzia, Sabrina, Al-Mahaidi, Riadh, & Zhao, Xiao-Ling (2006) Experimental and finite element analysis of a double strap joint between steel plates and normal modulus CFRP. Composite Structures, 75(1-4), pp. 156-162.
Fawzia, Sabrina, Zhao, Xiao-Ling, & Al-Mahaidi, Riadh (2010) Bond–slip models for double strap joints strengthened by CFRP. Composite Structures, 92(9), pp. 2137-2145.
Fuzail, Mohammad, Hill, David, Anwar, Jamil, Jahan, Shah, & Rintoul, Llewellyn (2007) Effectiveness of DOP Mobilizer on the Radiolysis of a Semi-Crystalline Ethylene-Propylene Copolymer. Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms, 265(1), pp. 285-289.
Gates-Stuart, Eleanor, Nguyen, Chuong, Adcock, Matt, Bradley, Jay, Morell, Matthew, & Lovell, David (2016) Art and science as creative catalysts. Leonardo, 49(5), pp. 452-453.
Gruber, Thierry, Larue, Gregoire S., Rakotonirainy, Andry, & Poulsen, Niels K. (2016) Assistive tactical decisions for safe and fast trajectories. In 23rd World Congress on Intelligent Transport Systems, 10–14 October 2016, Melbourne, VIC.
Gu, YuanTong & Liu, Gui-Rong (2006) Meshless techniques for convection dominated problems. Computational Mechanics, 38(2), pp. 272-283.
Gu, YuanTong & Liu, Gui-Rong (2005) A meshfree weak-strong (MWS) form method for time dependant problems. Computational Mechanics, 35(2), pp. 134-145.
Heng, Soong, Tan, Andy, Mathew, Joseph, Montgomery, Neil, Banjevic, Dragan, & Jardine, Andrew (2009) Intelligent condition-based prediction of machinery reliability. Mechanical Systems & Signal Processing, 23(N/A), pp. 1600-1614.
Heng, Soong, Zhang, Sheng, Tan, Andy, & Mathew, Joseph (2009) Rotating machinery prognostics. State of the art, challenges and opportunities. Mechanical Systems and Signal Processing, 23(3), pp. 724-739.
Ismail, Md. Farhad, Hasan, Muhammad Noman, & Saha, Suvash (2014) Numerical study of turbulent fluid flow and heat transfer in lateral perforated extended surfaces. Energy, pp. 632-639.
Jia, Sheng Xiang & Dhanasekar, Manicka (2007) Detection of Rail Wheel Flats using Wavelet Approaches. Structural Health Monitoring: an international journal, 6(2), pp. 121-131.
Karim, Azharul & Hawlader, M. (2006) Performance investigation of flat plate, v-corrugated and finned air collectors. Energy, 31(4), pp. 452-470.
Kim, Inhi, Larue, Gregoire S., Ferreira, Luis, Tavassoli Hojati, Ahmad, & Rakotonirainy, Andry (2013) Evaluating ITS interventions at railway level crossings using a driving simulator. In Australasian Transport Research Forum 2013, 02-04 October 2013, Queensland University of Technology, Brisbane, QLD.
Kosse, Vladis (2006) The Use of the AFD Method in Combination with Other Methods for Analysis of Complicated Cases of Machinery Failure. In Hargreaves, D (Ed.) Proceedings of the 7th International Tribology Conference: AUSTRIB 2006: Putting Tribology to Work, 3-6 December 2006, Australia, Queensland, Brisbane.
Kuruneru, Sahan T.W., Sauret, Emilie, Saha, Suvash C., & Gu, YuanTong (2016) A novel experimental method to assess particle deposition in idealized porous channels. Heat Transfer Engineering. (In Press)
Larue, Gregoire S., Kim, Inhi, Buckley, Lisa, Rakotonirainy, Andry, Haworth, Narelle L., & Ferreira, Luis (2014) Evaluation of emerging intelligent transport systems to improve safety on level crossings : an overview. In 2014 Global Level Crossing Symposium, 4-8 August 2014, Urbana, IL. (In Press)
Larue, Gregoire S. & Naweed, Anjum (2016) Toward automated enforcement at active level crossings in Australia. In 2016 Australasian Road Safety Conference, 6-8 September 2016, National Convention Centre, Canberra, ACT. (Unpublished)
Liu, Gui-Rong, Zhang, Guiyong, Gu, YuanTong, & Wang, Y (2005) A meshfree radial point interpolation method (RPIM) for three-dimensional solids. Computational Mechanics, 36(6), pp. 421-430.
Liu, Xuemei & Zhang, Min-Hong (2010) Permeability of high-performance concrete incorporating presoaked lightweight aggregates for internal curing. Magazine of Concrete Research, 62(2), pp. 79-89.
Lukito, Jose A., Susilawati, Connie, & Hanis, Muhammad Hasbi (2013) Natural disaster risk-informed for a better public infrastructure asset planning in Indonesian Central Government. In 9th Annual International Conference of the International Institute for Infrastructure Renewal and Reconstruction : Risk-informed Disaster Management : Planning for Response, Recovery and Resilience, 8-10 July 2013, Queensland University of Technology, Brisbane, QLD.
Madhani, Jehangir T. & Brown, Richard J. (2010) Investigating the hydrodynamic performance of a gross pollutant trap. In Mallinson, G.D. & Cater, J.E. (Eds.) 17th Australasian Fluid Mechanics Conference Proceedings, The Australasian Fluid Mechanics Society , The University of Auckland, Auckland, pp. 1-4.
Madhani, Jehangir T. & Brown, Richard J. (2010) The capture/retention investigation of a gross pollutant trap. In Mallinson, G.D. & Cater, J.E. (Eds.) 17th Australasian Fluid Mechanics Conference Proceedings, Australasian Fluid Mechanics Society, The University of Auckland, Auckland, pp. 1-4.
Madhani, Jehangir T., Pendrey, David C., Situ, Rong, & Brown, Richard J. (2007) Assessment of a Scalar Concentration (Komori) Probe for Measuring Fluctuating Dye Concentration in Water. In Jacobs, Peter, McIntyre, Tim, Cleary, Matthew, Buttsworth, David, Mee, David, Clements, Rose, et al. (Eds.) 16th Australasian Fluid Mechanics Conference (AFMC), 3-7 December, 2007, Crown Plaza, Gold Coast, Australia.
Madhani, Jehangir T., Young, Joseph A., Kelson, Neil A., & Brown, Richard J. (2009) A novel method to capture and analyze flow in a gross pollutant trap using image-based vector visualization. Water, Air, & Soil Pollution : Focus, 9(5-6), pp. 357-369.
Mengersen, Kerrie, Morawska, Lidia, & Wang, Hao (2011) Association between indoor air pollution measurements and respiratory health in women and children in Lao PDR. Indoor Air: international journal of indoor air quality and climate, 21(1), pp. 25-35.
Okutani, Takeshi, Nagai, Hideaki, Mamiya, Mikito, Shibuya, Masachika, & Castillo, Martin (2006) Effect of microgravity and magnetic field on the metallic and crystalline structure of magnetostrictive SmFe2 synthesized by unidirectional solidification. Annals of the New York Academy of Sciences, 1077, pp. 146-160.
Saha, Suvash C., Sauret, Emilie, & Gu, YuanTong (2014) Magnetic convection heat transfer in an open ended enclosure filled with paramagnetic fluids. Applied Mechanics and Materials, 553, pp. 109-114.
Sikorska, Joanna, Hodkiewicz, Melinda, & Ma, Lin (2011) Prognostic modelling options for remaining useful life estimation by industry. Mechanical Systems and Signal Processing, 25(5), pp. 1803-1836.
Situ, Rong, Brown, Richard J., & Loberto, Anthony (2009) Velocity and Concentration field of discharge from a boat propeller. In Szmyd, Janusz S., Spalek, J., & Kowalewski, T. A. (Eds.) ExHFT-7 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics Proceedings, AGH University of Science and Technology Press, Krakow, Poland, p. 991.
Situ, Rong, Hibiki, Takashi, Ishii, Mamoru, & Mori, Michitsugu (2005) Bubble Lift-off Size in Forced Convective Subcooled Boiling Flow. International Journal of Heat and Mass Transfer, 48(25-26), pp. 5536-5548.
Sun, Yong & Ma, Lin (2010) Estimating interactive coefficients for analysing interactive failures. Maintenance and Reliability, 2(46), pp. 67-72.
Sun, Yong & Ma, Lin (2007) Notes on ‘‘Mechanical systems hazard estimation using condition monitoring’’: response to the letter to the editor by Daming Lin and Murray Wiseman. Mechanical Systems and Signal Processing, 21(7), pp. 2950-2955.
Sun, Yong, Ma, Lin, & Mathew, Joseph (2008) Determination of optimal preventive maintenance strategy for serial production lines. Australian Journal of Mechanical Engineering, 5(2), pp. 97-104.
Sun, Yong, Ma, Lin, & Mathew, Joseph (2009) Failure analysis of engineering systems with preventive maintenance and failure interactions. Computers and Industrial Engineering, 57(2), pp. 539-549.
Sun, Yong, Ma, Lin, & Morris, Jon (2009) A practical approach for reliability prediction of pipeline systems. European Journal of Operational Research, 198(1), pp. 210-214.
Tran, Van, Yang, Bo-Suk, & Tan, Andy (2010) A classification and regression trees (CART) model of parallel structure and long-term prediction prognosis of machine condition. Structural Health Monitoring, 9(2), pp. 121-132.
Trevethan, Mark, Chanson, Hubert, & Brown, Richard J. (2006) Series of Detailed Turbulence Measurements in a Small Subtropical Estuarine System.
Trevethan, Mark, Chanson, Hubert, & Brown, Richard J. (2007) Turbulence and Turbulent Flux Events in a Small Subtropical Estuary.
Yousefi, S., Atrens, A.D., Sauret, E., Dahari, M., & Hooman, K. (2015) CFD convective flow simulation of the varying properties of CO2-H20 mixtures in geothermal systems. Scientific World Journal, 2015(843068).
Zhang, Sheng, Mathew, Joseph, Ma, Lin, & Sun, Yong (2005) Best basis-based intelligent machine fault diagnosis. Mechanical Systems and Signal Processing, 19(2), pp. 357-370.
Zhou, Yifan, Sun, Yong, Mathew, Joseph, Wolff, Rodney C., & Ma, Lin (2011) Latent degradation indicators estimation and prediction : a Monte Carlo approach. Mechanical Systems and Signal Processing, 25(1), pp. 222-236.