Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > INTERDISCIPLINARY ENGINEERING (091500)"

Subjects classification (32894)
- Australian and New Zealand Standard Research Classification (32894)
  - ENGINEERING (090000) (4678)
    - INTERDISCIPLINARY ENGINEERING (091500) (163)
      - Computational Fluid Dynamics (091501) (10)
      - Engineering Practice (091503) (9)
      - Fluidisation and Fluid Mechanics (091504) (17)
      - Heat and Mass Transfer Operations (091505) (38)
      - Interdisciplinary Engineering not elsewhere classified (091599) (29)
      - Risk Engineering (excl. Earthquake Engineering) (091507) (11)
      - Turbulent Flows (091508) (25)

Jump to: Book Chapter | Journal Article | Conference Paper | Report

Number of items at this level: 39.

Book Chapter

Chanson, Hubert, Brown, Richard, & Ferris, John (2004) Hydrodynamic and Ecological Study of a Sub-tropical Estuary in Queensland. In Mossa, Michele, Yasuda, Youichi, & Chanson, Hubert (Eds.) Fluvial, Environmental & Coastal Developments in Hydraulic Engineering. Taylor & Francis, Leiden, The Netherlands, pp. 133-149.

Journal Article

Bayissa, Wirtu & Haritos, Nicholas (2007) Damage identification in plate-like structures using bending moment response power spectral density. Structural Health Monitoring, 6(1), pp. 5-24.

Bayissa, Wirtu, Haritos, Nicholas, & Thelandersson, S. (2008) Vibration-based structural damage identification using wavelet transform. Mechanical Systems and Signal Processing, 22(5), pp. 1194-1215.

Bodisco, Timothy A., Reeves, Robert W., Situ, Rong, & Brown, Richard J. (2011) Bayesian models for the determination of resonant frequencies in a DI diesel engine. Mechanical Systems and Signal Processing, 26, pp. 305-314.

100

Desha, Cheryl & Hargroves, Karlson (2010) Surveying the state of higher education in energy efficiency, in Australian engineering curriculum. Journal of Cleaner Production, 18(7), pp. 652-658.

Edworthy, Judy, Hellier, Elizabeth, Titchener, Kirsteen, Naweed, Anjum, & Roels, Richard (2011) Heterogeneity in auditory alarm sets makes them easier to learn. International Journal of Industrial Ergonomics, 41(2), pp. 136-146.

Fawzia, Sabrina, Al-Mahaidi, Riadh, & Zhao, Xiao (2006) Experimental and finite element analysis of a double strap joint between steel plates and normal modulus CFRP. Composite Structures, 75(1-4), pp. 156-162.

Fawzia, Sabrina, Zhao, Xiao, & Al-Mahaidi, Riadh (2010) Bond-slip models for double strap joints strengthened by CFRP. Composite Structures, 92(9), pp. 2137-2145.

Fuzail, Mohammad, Hill, David, Anwar, Jamil, Jahan, Shah, & Rintoul, Llewellyn (2007) Effectiveness of DOP Mobilizer on the Radiolysis of a Semi-Crystalline Ethylene-Propylene Copolymer. Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms, 265(1), pp. 285-289.

Gu, YuanTong & Liu, Gui-Rong (2006) Meshless techniques for convection dominated problems. Computational Mechanics, 38(2), pp. 272-283.

Gu, YuanTong & Liu, Gui-Rong (2005) A meshfree weak-strong (MWS) form method for time dependant problems. Computational Mechanics, 35(2), pp. 134-145.

Heng, Soong, Tan, Andy, Mathew, Joseph, Montgomery, Neil, Banjevic, Dragan, & Jardine, Andrew (2009) Intelligent condition-based prediction of machinery reliability. Mechanical Systems & Signal Processing, 23(N/A), pp. 1600-1614.

Heng, Soong, Zhang, Sheng, Tan, Andy, & Mathew, Joseph (2009) Rotating machinery prognostics. State of the art, challenges and opportunities. Mechanical Systems and Signal Processing, 23(3), pp. 724-739.

141

Jia, Sheng Xiang & Dhanasekar, Manicka (2007) Detection of Rail Wheel Flats using Wavelet Approaches. Structural Health Monitoring: an international journal, 6(2), pp. 121-131.

Karim, Azharul & Hawlader, M. (2006) Performance investigation of flat plate, v-corrugated and finned air collectors. Energy, 31(4), pp. 452-470.

Liu, Gui-Rong, Zhang, Guiyong, Gu, YuanTong, & Wang, Y (2005) A meshfree radial point interpolation method (RPIM) for three-dimensional solids. Computational Mechanics, 36(6), pp. 421-430.

Madhani, Jehangir T., Young, Joseph A., Kelson, Neil A., & Brown, Richard J. (2009) A novel method to capture and analyze flow in a gross pollutant trap using image-based vector visualization. Water, Air, & Soil Pollution : Focus, 9(5-6), pp. 357-369.

226

Mengersen, Kerrie, Morawska, Lidia, & Wang, Hao (2010) Association between indoor air pollution measurements and respiratory health in women and children in Lao PDR. Indoor Air: international journal of indoor air quality and climate, 21(1), pp. 25-35.

Okutani, Takeshi, Nagai, Hideaki, Mamiya, Mikito, Shibuya, Masachika, & Castillo, Martin (2006) Effect of microgravity and magnetic field on the metallic and crystalline structure of magnetostrictive SmFe2 synthesized by unidirectional solidification. Annals of the New York Academy of Sciences, 1077, pp. 146-160.

Sikorska, Joanna, Hodkiewicz, Melinda, & Ma, Lin (2011) Prognostic modelling options for remaining useful life estimation by industry. Mechanical Systems and Signal Processing, 25(5), pp. 1803-1836.

Situ, Rong, Hibiki, Takashi, Ishii, Mamoru, & Mori, Michitsugu (2005) Bubble Lift-off Size in Forced Convective Subcooled Boiling Flow. International Journal of Heat and Mass Transfer, 48(25-26), pp. 5536-5548.

341

Sun, Yong & Ma, Lin (2010) Estimating interactive coefficients for analysing interactive failures. Maintenance and Reliability, 2(46), pp. 67-72.

120

Sun, Yong & Ma, Lin (2007) Notes on ‘‘Mechanical systems hazard estimation using condition monitoring’’: response to the letter to the editor by Daming Lin and Murray Wiseman. Mechanical Systems and Signal Processing, 21(7), pp. 2950-2955.

Sun, Yong, Ma, Lin, & Mathew, Joseph (2008) Determination of optimal preventive maintenance strategy for serial production lines. Australian Journal of Mechanical Engineering, 5(2), pp. 97-104.

Sun, Yong, Ma, Lin, & Mathew, Joseph (2009) Failure analysis of engineering systems with preventive maintenance and failure interactions. Computers and Industrial Engineering, 57(2), pp. 539-549.

Sun, Yong, Ma, Lin, & Morris, Jon (2009) A practical approach for reliability prediction of pipeline systems. European Journal of Operational Research, 198(1), pp. 210-214.

Tran, Van, Yang, Bo-Suk, & Tan, Andy (2010) A classification and regression trees (CART) model of parallel structure and long-term prediction prognosis of machine condition. Structural Health Monitoring, 9(2), pp. 121-132.

Zhang, Sheng, Mathew, Joseph, Ma, Lin, & Sun, Yong (2005) Best basis-based intelligent machine fault diagnosis. Mechanical Systems and Signal Processing, 19(2), pp. 357-370.

Zhou, Yifan, Sun, Yong, Mathew, Joseph, Wolff, Rodney C., & Ma, Lin (2011) Latent degradation indicators estimation and prediction : a Monte Carlo approach. Mechanical Systems and Signal Processing, 25(1), pp. 222-236.

Conference Paper

Ahmed, S., Rasul, M.G., Martens, W., & Brown, R.J. (2009) Sustainable reuse of storm/waste-water resources : a review on solar photocatalytic purification processes. In The Central Region Engineering Conference (CREC 2009), 14-15 August 2009, Central Queensland Univeristy, Rockhampton, QLD.

English, Lyn D. (2008) Interdisciplinary problem solving : a focus on engineering experiences. In Goos, Merrilyn, Brown, Ray, & Makar, Katie (Eds.) Mathematics Education Research Group of Australia Conference, 28 June - 1 July 2008, Brisbane, Qld, Australia.

Kosse, Vladis (2006) The Use of the AFD Method in Combination with Other Methods for Analysis of Complicated Cases of Machinery Failure. In Hargreaves, D (Ed.) Proceedings of the 7th International Tribology Conference: AUSTRIB 2006: Putting Tribology to Work, 3-6 December 2006, Australia, Queensland, Brisbane.

Madhani, Jehangir T. & Brown, Richard J. (2010) Investigating the hydrodynamic performance of a gross pollutant trap. In Mallinson, G.D. & Cater, J.E. (Eds.) 17th Australasian Fluid Mechanics Conference Proceedings, The Australasian Fluid Mechanics Society , The University of Auckland, Auckland, pp. 1-4.

Madhani, Jehangir T. & Brown, Richard J. (2010) The capture/retention investigation of a gross pollutant trap. In Mallinson, G.D. & Cater, J.E. (Eds.) 17th Australasian Fluid Mechanics Conference Proceedings, Australasian Fluid Mechanics Society, The University of Auckland, Auckland, pp. 1-4.

Madhani, Jehangir T., Pendrey, David C., Situ, Rong, & Brown, Richard J. (2007) Assessment of a Scalar Concentration (Komori) Probe for Measuring Fluctuating Dye Concentration in Water. In Jacobs, Peter, McIntyre, Tim, Cleary, Matthew, Buttsworth, David, Mee, David, Clements, Rose, et al. (Eds.) 16th Australasian Fluid Mechanics Conference (AFMC), 3-7 December, 2007, Crown Plaza, Gold Coast, Australia.

Situ, Rong, Brown, Richard J., & Loberto, Anthony (2009) Velocity and Concentration field of discharge from a boat propeller. In Szmyd, Janusz S., Spalek, J., & Kowalewski, T. A. (Eds.) ExHFT-7 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics Proceedings, AGH University of Science and Technology Press, Krakow, Poland, p. 991.

Report

Chanson, Hubert, Brown, Richard J., Ferris, John, & Warburton, Kevin (2003) A Hydraulic, Environmental and Ecological Assessment of a Sub-tropical Stream in Eastern Australia: Eprapah Creek, Victoria Point QLD on 4 April 2003.

211

Trevethan, Mark, Chanson, Hubert, & Brown, Richard J. (2006) Series of Detailed Turbulence Measurements in a Small Subtropical Estuarine System.

139

Trevethan, Mark, Chanson, Hubert, & Brown, Richard J. (2007) Turbulence and Turbulent Flux Events in a Small Subtropical Estuary.

105

This list was generated on Sat May 25 09:23:57 2013 EST.

Export as	RSS 1.0 Atom RSS 2.0