Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > INTERDISCIPLINARY ENGINEERING (091500) > Fluidisation and Fluid Mechanics (091504)"
|Up a level|
- Subjects classification (44934)
- Australian and New Zealand Standard Research Classification (44934)
Group by: Authors/Creators | Item Type
Number of items at this level: 31.
Dorr, Gary J., Wang, Shuangshuang, Mayo, Lisa C., McCue, Scott W., Forster, W. Alison, Hanan, Jim, et al. (2015) Impaction of spray droplets on leaves: Influence of formulation and leaf character on shatter, bounce and adhesion. Experiments in Fluids, 56(7), pp. 143-1.
Hassan, N. M. S., Khan, M. M. K., Rasul, M. G., & Rackemann, Darryn W. (2007) An Experimental Study of Bubble Rise Characteristics in non – Newtonian (Power-Law) Fluids. In 16th Australasian Fluid Mechanics Conference (AFMC), 3-7 December, 2007, Gold Coast.
Hassan, N. M. S., Khan, M. M. K., Rasul, M. G., & Rackemann, Darryn W. (2008) An experimental investigation of bubble rise characteristics in a crystal suspended non-Newtonian fluid. In The XVth International Congress on Rheology: The Society of Rheology 80th Annual Meeting, August 3 - 8, 2008, Monterey, California.
Kelson, Neil A. (2011) Note on similarity solutions for viscous flow over an impermeable and non-linearly (quadratic) stretching sheet. International Journal of Non-Linear Mechanics, 46(8), pp. 1090-1091.
Letchford, Chris & Mason, Matthew (2011) Drag of square section tubes. In 13th International Conference on Wind Engineering, 10-15 July 2011, Amsterdam, Netherlands.
Madhani, Jehangir, Young, Joseph A., & Brown, Richard J. (2012) Image based flow visualisation of experimental flow fields inside a gross pollutant trap. In 18th Australasian Fluid Mechanics Conference Proceedings, The Australasian Fluid Mechanics Society, University of Tasmania, Launceston, TAS, pp. 1-4.
Mason, M. S., James, D. L., & Letchford, C. W. (2009) Wind pressure measurements on a cube subjected to pulsed impinging jet flow. Wind and Structures, 12(1), pp. 77-88.
Mason, M. S., Letchford, C. W., & James, D. L. (2005) Pulsed wall jet simulation of a stationary thunderstorm downburst, Part A: Physical structure and flow field characterization. Journal of Wind Engineering and Industrial Aerodynamics, 93(7), pp. 557-580.
Mason, M. S., Wood, G. S., & Fletcher, D. F. (2007) Impinging jet simulation of stationary downburst flow over topography. Wind and Structures, 10(5), pp. 437-462.
Mason, M. S., Wood, G. S., & Fletcher, D. F. (2009) Influence of tilt and surface roughness on the outflow wind field of an impinging jet. Wind and Structures, 12(3), pp. 179-204.
Mason, Matthew & Letchford, Chris W. (2003) Pulsing jet simulation of a thunderstorm downburst. In 10th Australasian Wind Engineering Society Workshop, 2003, Sydney, Australia.
Mason, Matthew S. & Wood, Graeme S. (2005) Influence of jet inclination on structural loading in an experimentally simulated microburst. In 6th Asia-Pacific Conference on Wind Engineering, September, 2005, Seoul, South Korea.
Mason, Matthew S. & Wood, Graeme S. (2004) Loading of a very tall building in a simulated downburst wind field. In 11th Australasian Wind Engineering Society Workshop, 2004, Darwin, NT.
Mason, Matthew S., Wood, Graeme S., & Fletcher, David F. (2010) Numerical investigation of the influence of topography on simulated downburst wind fields. Journal of Wind Engineering and Industrial Aerodynamics, 98(1), pp. 21-33.
Mason, Matthew S., Wood, Graeme S., & Fletcher, David F. (2009) Numerical simulation of downburst winds. Journal of Wind Engineering and Industrial Aerodynamics, 97(11–12), pp. 523-539.
Pennacchi, P., Borghesani, P., Chatterton, S., & Vania, A. (2012) Hydraulic instability onset detection in Kaplan turbines by monitoring shaft vibrations. In Proceedings of the ASME Design Engineering Technical Conference, ASME, Chicago, Illinois, USA, pp. 715-722.
Rackemann, Darryn W. & Broadfoot, Ross (2008) Improved crystallizer stirrer performance through CFD modelling. Zuckerindustrie/SugarIndustry, 133(5), pp. 317-322.
Rackemann, Darryn W. & Broadfoot, Ross (2007) Improved pan stirrer performance through CFD modelling. In International Society of Sugar Cane Technologists.
Rackemann, Darryn W. & Broadfoot, Ross (2008) A new design of jigger system to improve vacuum pan performance. International Sugar Journal, 110(1320).
Rackemann, Darryn W., Broadfoot, Ross, & Stephens, Darrin W. (2006) Improved CFD modelling of natural circulation vacuum pans. In Australian Society of Sugar Cane Technologists.
Rackemann, Darryn W., Plaza, Floren, & Stephens, Darrin W. (2006) Steam side calandria modelling of vacuum pans and evaporators. In Australian Society of Sugar Cane Technologists.
Rackemann, Darryn W., Rainey, Thomas J., Broadfoot, Ross, & Pike, David (2006) Performance of an improved pan stirrer at Isis sugar mill. In Australian Society of Sugar Cane Technologists.
Senadeera, Wijitha (2008) Fluidization behaviour of food materials: effect of moisture and shape. In Ferreira, E. C. & Mota, M. (Eds.) 10th International Chemical and Biological Engineering Conference, 4-6 September 2008, Braga, Portugal.
Senadeera, Wijitha (2009) Minimum fluidization velocity of food materials : Effect of moisture and shape. Chemical Product and Process Modeling, 4(4 article 11).
Senadeera, Wijitha (2009) Prediction of fluidization behaviour and a quasi-stationary approach to drying kinetics of irregular particulate food materials. In 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, 28th June- 3rd July 2009, Krakow, Poland.
Senadeera, Wijitha, Bhandari, Bhesh R., Young, Gordon, & Wijesinghe, Bandu (1998) Fluidisation behaviour of cylindrical green bean particulates in drying. Tropical Agricultural Research, 10, pp. 192-202.
Senadeera, Wijitha, Bhandari, Bhesh R., Young, Gordon, & Wijesinghe, Bandu (2000) Physical properties and fluidization behaviour of fresh green bean particulates during fluidized bed drying. Food and Bioproducts Processing, 78(Part C), pp. 43-47.
Suara, Kabir, Brown, Richard, Wang, Charles, Borgas, Michael, & Feng, Yanming (2015) Estimate of Lagrangian integral scales in shallow tidal water using high resolution GPS-tracked drifters. In E-proceeding of the 36th IAHR World Congress, The World Forum, Delft-The Hague, the Netherlands.
Tan, Andy (2008) Reduced size bi-flow centrifugal pump as ventricular assist device for end-stage patients. In Xu, J, Wu, Y, Zhang, Y, & Zhang, J (Eds.) Fluid Machinery and Fluid Mechanics: 4th International Symposium (4th ISFMFE), 24 - 27 November 2008, China, Beijing.
Wang, Lina & Morawska, Lidia (2008) Characterizing and Predicting Ultrafine Particle Number Concentration in an Office by CFD Method. In First International Conference on Building Energy and Environment COBEE, 13 - 16 July 2008, Dalian, China.
Wood, Graeme S. & Mason, Matthew (2004) Discussion on full-scale internal pressure measurements. In 11th Australasian Wind Engineerng Society Workshop, 2004, Darwin, NT.