Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > INTERDISCIPLINARY ENGINEERING (091500) > Interdisciplinary Engineering not elsewhere classified (091599)"

Subjects classification (32824)
- Australian and New Zealand Standard Research Classification (32824)
  - ENGINEERING (090000) (4663)
    - INTERDISCIPLINARY ENGINEERING (091500) (163)
      - Interdisciplinary Engineering not elsewhere classified (091599) (29)

Group by: Authors/Creators | Item Type

Jump to: B | C | D | G | H | K | M | P | S | Z

Number of items at this level: 29.

B

Bai, Ruixiang & Yan, Cheng (2007) Effects of surface cracks and coating on fracture behaviour of microstructured silica optical fibers. In Fifth Australasian Congress on Applied Mechanics (ACAM 2007), 10–12 December, 2007, Brisbane, Australia.

Bell, John, Bergman, Robert, Garcia Hansen, Veronica, Mabb, John, & Morawska, Lidia (2003) Occupant health and productivity : an Australian perspective. In Yang, Jay, Brandon, Peter, & Sidwell, Anthony (Eds.) Summary Book of The CIB 2003 International Conference on Smart and Sustainable Built Environment (SASBE 2003), 19-21 November, 2003, Brisbane.

189

C

Clothier, Reece A., Walker, Rodney A., Fulton, Neale, & Cambell, Duncan (2008) Lessons in history: The regulation of "horse-less carriages" and "pilot-less aircraft". In Australia & New Zealand Regional Organisation of the Society for Risk Analysis: 3rd Annual Conference, Facilitating partnerships: Managing risks in complex systems, 30th September – 1st October 2008, Canberra, Australia. (Unpublished)

156

D

Davis, Lloyd E. & Bunker, Jonathan M. (2008) Characterising heavy vehicle suspensions – impulse testing results and analysis. Main Roads, Brisbane, Australia.

331

Davis, Lloyd E. & Bunker, Jonathan M. (2009) Determining heavy vehicle suspension health from vibratory wheel loads. In Proceedings of 3rd Smart Systems Student Conference, Owen J Wordsworth Room, Queensland University of Technology, Gardens Point, Brisbane.

177

Davis, Lloyd E. & Bunker, Jonathan M. (2008) Development of a software model of a heavy vehicle suspension for research. (Unpublished)

360

Davis, Lloyd E. & Bunker, Jonathan M. (2008) Heavy Vehicle Suspensions - Testing and Analysis: Phase 3 - eigenfrequency peak loads. Test Plan. (In Press)

917

Davis, Lloyd E. & Bunker, Jonathan M. (2007) Heavy Vehicle Suspensions – Testing and Analysis. A literature review. Department of Main Roads and the Queensland University of Technology, Brisbane, Queensland, Australia.

1,108

Davis, Lloyd E. & Bunker, Jonathan M. (2008) In-service suspension testing of heavy vehicles – update on recent test programme and proof-of-concept. In Wrigley, Cara & Lawry, Simon (Eds.) Built Environment and Engineering Postgraduate Student Conference, 10 September 2008, QUT, Brisbane.

184

Davis, Lloyd E. & Bunker, Jonathan M. (2008) In-service testing of heavy vehicle suspensions : background report for the NTC project.

172

Davis, Lloyd E. & Bunker, Jonathan M. (2008) Load-sharing in heavy vehicle suspensions : new metrics for old. (Unpublished)

629

Davis, Lloyd E., Bunker, Jonathan M., & Karl, Charles (2008) Technical Feasibility Assessment of On-Board Mass-Monitoring (OBM) Devices: a) Accuracy and robustness b) Ancillary systems analysis. Full-scale testing plan.

253

230

169

Davis, Lloyd E., Bunker, Jonathan M., & Karl, Charles (2009) Technical feasibility assessment of On-Board Mass-Monitoring (OBM) devices: a)accuracy and robustness b)ancillary systems analysis : frequency analysis report.

Dawson, Graham C. & Brown, Richard J. (2003) Action research for generic skill development : an integrated curriculum approach to develop information literacy, critical analysis and English expression of engineering students (utilizing triangulated assessment). In Brown, Allison (Ed.) Australasian Association for Engineering Education (14th : 2003 : RMIT University, Melbourne, Vic.), 29 September - 1 October, 2003, RMIT, Melbourne.

1,044

Dunbabin, Mathew & Tan, Andy (2005) Hybrid Adaptive Control of Temperature Dependent Piezo-Actuated Flexible Structures. In Salman Leong, M, Abdul Rahman, R, & Chek Zin, T (Eds.) Proceedings of the 11th Asia-Pacific Vibration Conference 2005, 23-25 November 2005, Malaysia, Langkawi.

Dunbabin, Mathew & Tan, Andy (2005) Modelling Flexible Structures with Embedded Sensors / Actuators for Active Vibration Control. In Salman Leong, M, Abdul Rahman, R, & Chek Zin, T (Eds.) Proceedings of the 11th Asia-Pacific Vibration Conference 2005, 23-25 November 2005, Malaysia, Langkawi.

G

Gu, Tianlong, Dong, Rongsheng, & Tian, Yu-Chu (2003) Continuous Petri nets augmented with maximal and minimal firing speeds. In IEEE International Conference on Systems, Man and Cybernetics, 5-8 Oct 2003, Washington, DC.

196

Gu, YuanTong, Tan, Andy C. C., & Yarlagadda, Prasad K. (2008) An effective multiscale approach for deformation analyses of carbon nanotube-based nanoswitches. In Chiao, Jung-Chih & Hariz, Alex J. (Eds.) SPIE-Micro- and Nanotechnology: Materials, Processes, Packaging, and Systems IV, 10 December 2008, Melbourne, Australia.

105

Gu, YuanTong & Yarlagadda, Prasad K.D.V. (2008) A multiscale deformation analysis for mono-crystalline copper under dynamic uniaxial tension. Advanced Materials Research, 32, pp. 241-244.

Gu, YuanTong & Zhang, L.C. (2008) Coupling of the meshfree and finite element methods for determination of the crack tip fields. Engineering Fracture Mechanics, 75, pp. 986-1004.

420

H

Hwang, Won-Woo, Kim, Dong, Tan, Andy, & Yang, Bo-Suk (2005) Condition classification of small reciprocating compressor for refrigeration using artificial neural networks and support vector machines. Mechanical Systems and Signal Processing, 19(2), pp. 371-390.

K

Kleinschmidt, Tristan, Goonetilleke, Ashantha, Fookes, Clinton B., & Yarlagadda, Prasad K.D.V. (2010) A multi-disciplinary approach for the design and management of airport terminals. In Satyanarayana, Beela & Ramji, Koona (Eds.) Proceedings of the Third International and Twenty Fourth All India Manufacturing Technology, Design and Research Conference 2010 - Global Trends and Challenges in Design and Manufacturing, AUCE (A), Visakhapatnam, India, Andhra University, Visakhapatnam, India, pp. 57-62.

269

M

Madhani, Jehangir T. & Brown, Richard J. (2011) A comprehensive investigation into the hydrodynamic and capture/retention performance of a gross pollutant trap. In Chanson, Hubert (Ed.) Proceedings of the 34th IAHR World Congress, the 33rd Hydrology and Water Resources Symposium and the 10th Conference on Hydraulics in Water Engineering: Balance and Uncertainty - Water in a Changing World, Engineers Australia, Brisbane Convention & Exhibition Centre, Brisbane, Queensland, Australia, pp. 2671-2678.

P

Plaza, Floren (2011) An additional step towards modelling the mechanical behaviour of sugar cane bagasse. In Bruce, Robin (Ed.) Australian Society of Sugar Cane Technologists. Proceedings, Australian Society of Sugar Cane Technologists, Mackay.

Plaza, Floren, Booth, Andrew, Xing, Jeff, & Kent, Geoff (2011) Centrifuging rotary vacuum filter mud at Tully Mill. In Bruce, Robin (Ed.) Australian Society of Sugar Cane Technologists. Proceedings, Australian Society of Sugar Cane Technologists (ASSCT), Mackay.

S

Surawski, Nicholas C., Miljevic, Branka, Roberts, Boyd A., Modini, Robin L., Situ, Rong, Brown, Richard J., et al. (2010) Particle emissions, volatility, and toxicity from an ethanol fumigated compression ignition engine. Environmental Science and Technology, 44(1), pp. 229-235.

157

Z

Zhang, Sheng, Ma, Lin, & Mathew, Joseph (2005) Vibration feature analysis for rolling element bearing diagnosis using Bayesian neural networks. In Leong, Salman (Ed.) Asia Pacific Vibration Conference 2005, 22-25 November 2005, Langkawi Malaysia.

This list was generated on Sat May 18 09:11:50 2013 EST.

Export as	RSS 1.0 Atom RSS 2.0