Items where Subject is "Australian and New Zealand Standard Research Classification > ENGINEERING (090000) > OTHER ENGINEERING (099900) > Engineering not elsewhere classified (099999)"

Subjects classification (26013)
- Australian and New Zealand Standard Research Classification (26013)
  - ENGINEERING (090000) (3648)
    - OTHER ENGINEERING (099900) (92)
      - Engineering not elsewhere classified (099999) (63)

Group by: Authors/Creators | Item Type

Jump to: B | C | D | F | G | H | K | L | M | R | S | T | W | Z

Number of items at this level: 63.

B

Bai, Ruixiang, Chen, Zhenhuan, & Yan, Cheng (2007) Cross Section Design of Holey Optical Fibers with Coating Based on Stress Analysis in Tension. In International Conference on Mechanical Engineering and Mechanics, November 5-7, 2007, Wuxi, China.

Birtwhistle, David, Cash, Gregory, George, Graeme, Liu, Heping, & Sovar, Robert (2006) Studies of The Diffusion of Low Molecular Weight Silicone Fluids on Polluted HV Silicone Insulators. I. Use of Diffuse Reflectance FTIR. IEEE Transactions of Dielectrics And Electrical Insulation, 13(4), pp. 877-884.

Buisson, David & Jensen, Bob (2008) Stratégé - Study of mobility of Australian and European Union engineering students and tools to assist mobility. In Mann, L, Thompson, A, & Howard, P (Eds.) Proceedings of the 2008 AaeE Conference, the 19th Annual Conference for the Australasian Association for Engineering Education: To Industry and Beyond, 7 - 10 December 2008, Australia, Queensland, Yeppoon.

Byers, Terry & Dawes, Les A. (2006) Out of the square into reality. In Rowe, Gerard & Reid, Gillian (Eds.) 17th Annual Conference of the Australasian Association for Engineering Education, 10-13 December 2006, Auckland, New Zealand.

100

C

Campbell, Duncan A., Beck, Hilary, Buisson, David, & Hargreaves, Douglas (2009) Addressing Challenges for Internationalisation and Mobility in Engineering Through CDIO Standards. In Kestell, Colin, Grainger, Steven, & Cheung, John (Eds.) Proceedings of the 20th Annual Conference for the Australasian Association for Engineering Education, School of Mechanical Engineering, University of Adelaide, The University of Adelaide, Adelaide, pp. 593-598.

169

Campbell, Duncan A., Bunker, Jonathan M., Hoffman, Keith P., & Iyer, R. Mahalinga (2004) Processes in distilling course capability profiles. In Snook, Chris & Thorpe, David (Eds.) 15th Annual Conference for the Australasian Association for Engineering Education and the 10th Australasian Women in Engineering Forum, 27-29 September, Toowoomba.

500

Campbell, Duncan A., Dawes, Les A., Beck, Hilary, Wallace, Sam, Boman, Marian, & Reidsema, Carl (2009) Graduate Attribute Mapping With the Extended CDIO Framework. In Kestell, Colin, Grainger, Steven, & Cheung, John (Eds.) Proceedings of the 20th Annual Conference for the Australasian Association for Engineering Education, School of Mechanical Engineering, University of Adelaide, The University of Adelaide, Adelaide, pp. 599-604.

149

Campbell, Duncan Andrew, Dawes, Les A., Beck, Hilary, Wallace, Sam, Dansie, Brenton, & Reidsema, Carl (2009) An extended CDIO syllabus framework with preparatory engineering proficiencies. In 5th International CDIO Conference, 7-10 June 2009, Singapore Polytechnic, Singapore.

160

Chanson, Hubert, Brown, Richard, & Ferris, John (2004) Hydrodynamic and Ecological Study of a Sub-tropical Estuary in Queensland. In Mossa, Michele, Yasuda, Youichi, & Chanson, Hubert (Eds.) Fluvial, Environmental & Coastal Developments in Hydraulic Engineering. Taylor & Francis, Leiden, The Netherlands, pp. 133-149.

Chin, Yiyong, Jayalath, Dhammika, & Senadji, Bouchra (2010) Distributed orthogonal space-time block codes with adaptive diversity gain. In Proceedings of 4th International Conference on Signal Processing and Communication Systems (ICSPCS'2010), IEEE, Radisson Resort, Gold Coast, Queensland. (In Press)

D

Davis, Lloyd E. & Bunker, Jonathan M. (2008) Characterising heavy vehicle suspensions – impulse testing results and analysis. Main Roads, Brisbane, Australia.

231

Davis, Lloyd E. & Bunker, Jonathan M. (2009) Determining heavy vehicle suspension health from vibratory wheel loads. In Proceedings of 3rd Smart Systems Student Conference, Owen J Wordsworth Room, Queensland University of Technology, Gardens Point, Brisbane.

139

Davis, Lloyd E. & Bunker, Jonathan M. (2010) Determining heavy vehicle suspension health from vibratory wheel loads. In The HVTT11 International Heavy Vehicle Symposium, 14-17 March 2010, Melbourne, Victoria.

Davis, Lloyd E. & Bunker, Jonathan M. (2009) Dynamic load sharing for heavy vehicles : a new metric. Road and Transport Research, 18(4), pp. 23-37.

148

Davis, Lloyd E. & Bunker, Jonathan M. (2009) Heavy vehicle suspension testing and analysis : dynamic load sharing.

986

Davis, Lloyd E. & Bunker, Jonathan M. (2009) Heavy vehicle suspensions : testing and analysis. Phase 3 : eigenfrequency peak loads : measuring suspension health from wheel loads [Preliminary test report].

487

Davis, Lloyd E. & Bunker, Jonathan M. (2010) Static accuracy and precision of heavy vehicle on-board mass systems. In HVTT11 International Heavy Vehicle Symposium, 14-17 March 2010, State Library of Victoria, Melbourne, Victoria.

Davis, Lloyd E. & Bunker, Jonathan M. (2009) Suspension testing of 3 heavy vehicles - dynamic wheel force analysis - Report. State of Queensland (Department of Main Roads) & Queensland University of Technology, Brisbane, Queensland, Australia.

495

Davis, Lloyd E., Bunker, Jonathan M., & Karl, Charles (2008) Technical Feasibility Assessment of On-Board Mass-Monitoring (OBM) Devices: a) Accuracy and robustness b) Ancillary systems analysis. Full-scale testing plan.

224

139

124

Davis, Lloyd E., Bunker, Jonathan M., Karl, Charles, & Cai, David (2010) Dynamic analysis of on-board mass data to determine tampering in heavy vehicle on-board mass systems. In Proceedings of the HVTT11 International Heavy Vehicle Symposium, State Library of Victoria, Melbourne, Victoria.

Dawes, Les A. & Senadji, Bouchra (2010) Strategies to engage engineering students in group project work. In Proceedings of the International Conference on Engineering Education (ICEE-2010), Silesian University of Technology, Gliwice, Poland.

F

Francis, Adam J. & Skitmore, Martin (2005) Risk management within the electrical distribution supply industry in South East Queensland. Journal of Financial Management of Property and Construction, 10(1), pp. 45-53.

500

G

Goldsmith, Rosalie, Reidsema, Carl, Campbell, Duncan A., Hadgraft, Roger, & Levy, David (2009) Designing the Future. In Kestell, Colin, Grainger, Steven, & Cheung, John (Eds.) Proceedings of the 20th Annual Conference for the Australasian Association for Engineering Education, School of Mechanical Engineering, University of Adelaide, The University of Adelaide, Adelaide, pp. 293-298.

102

Goldsmith, Rosalie, Reidsema, Carl, Campbell, Duncan A., Hadgraft, Roger, & Levy, David (2011) Designing the future. Australasian Journal of Engineering Education, 17(1), pp. 1-10.

Gorjian, Nima, Ma, Lin, Yarlagadda, Prasad K., & Sun, Yong (2009) Identifying different determinants of asset life. In Gao, Jinji, Lee, Jay, Ni, Jun, Ma, Lin, & Mathew, Joseph (Eds.) World Congress for Engineering Asset Management, 27-30 October 2008, Beijing, China.

283

Gray, Matthew, Brown, Richard J., Miller, Evonne, Buys, Laurie, & Dawes, Les A. (2011) Teaching sustainability : vehicle or endpoint? In Chandra, Vinesh, Hudson, Peter B., & Lee, Kar-Tin (Eds.) Proceedings of the STEM in Education Conference : Science, Technology, Engineering and Mathematics in Education Conference, STEM/Queensland University of Technology, Queensland University of Technology, Brisbane, Qld, 1 -11.

H

Hargreaves, Douglas J. (2011) Energy and population policies in Australia. In World Engineers' Convention, 4-9 September 2011, Geneva, Switzerland.

Hargreaves, Douglas J. (2011) Energy and population policies in Australia. In Escaping Silos. SSEE - Society for Sustainability and Environmental Engineering National Conference, 24-26 October 2011, Brisbane, QLD, Australia. (Unpublished)

Hsiao, David W., Trappey, Amy, Ma, Lin, & Ho, Pei-Shun (2007) Integrate Collaborative Project and Intellectual Asset Management for IC Design Industry. In 11th International Conference on Computer Supported Cooperative Work in Design, 2007. CSCWD 2007, 26-28 April 2007, Melbourne, Victoria.

K

Karim, Azharul (2010) Engaging operations management students by designing the unit with industry focus. In EDULEARN10 Proceedings. International Association of Technology, Education and Development (IATED), IATED Publications, Gran Hotel Princesa Sofia, Congress Center Barcelona, Spain, pp. 989-997.

L

Liu, G. R., Xu, x., Zhang, G. Y., & Gu, YuanTong (2009) An extended Galerkin weak form and a point interpolation method with continuous strain field and superconvergence using triangular mesh. Computational Mechanics, 43(5), pp. 651-673.

Lowe, David & Skitmore, Martin (2007) Organisational learning style and practitioner competence. Journal of Financial Management of Property and Construction, 11(3), pp. 151-164.

268

M

Ma, Lin, Mathew, Joseph, & Pudney, Steven (2005) Asset Management Decisions - Literature Review and Analysis. In Harrop, T (Ed.) Proceedings of International Conference of Maintenance Societies 2005, 31 May - 2 June 2005, Australia, Tasmania, Hobart.

Ma, Lin, Mathew, Joseph, & Sun, Yong (2006) Determination of Optimal Preventive Maintenance Strategy for Serial Production Lines. In Mathew, J, Kennedy, J, Ma, L, Tan, A, & Anderson, D (Eds.) Proceedings of the 1st World Congress on Engineering Asset Management (WCEAM), 11- 14 July 2006, Australia, Queensland, Gold Coast.

Ma, Lin, Mathew, Joseph, Sun, Yong, & Zhang, Sheng (2006) An Analytical Model for Interactive Failures. Reliability Engineering and System Safety, 91(5), pp. 495-504.

Ma, Lin, Mathew, Joseph, Sun, Yong, & Zhang, Sheng (2005) Determination of preventive maintenance lead time using hybrid analysis. International Journal of Plant Engineering and Management (国际设备工程与管理), 10(1), pp. 13-18.

Ma, Lin, Mathew, Joseph, Sun, Yong, & Zhang, Sheng (2005) A Methodology for Analysing Interactive Failures of Components. In Leong, M, Rahman, R, & Zin, T (Eds.) Proceedings of the 11th Asia-Pacific Vibration Conference (APVC Proceedings, 2005), 23 November - 25 November 2005, Malaysia, Langkawi.

Ma, Lin, Mathew, Joseph, & Zhang, Sheng (2005) Some Recent Advances on Condition Monitoring Research. In Bento Coelho, J, Boubezari, M, Alarcao, D, & Neves, M (Eds.) Proceedings of the 12th International Congress on Sound and Vibration, 11 - 14 July 2005, Portugal, Lisbon.

Ma, Lin & Sun, Yong (2006) An Approach to Management Planning for New Assets. In Dessouky, M (Ed.) Proceedings of the 36th International Conference on Computers and Industrial Engineering, 20 - 23 June 2006, People's Republic of China, Taiwan, Taipei.

Ma, Lin & Sun, Yong (2006) Effects of Failure Interactions on Repairable Systems. In Dessouky, M (Ed.) Proceedings of the 36th International Conference on Computers and Industrial Engineering, 20 - 23 June 2006, People's Republic of China, Taiwan, Taipei.

Ma, Lin, Sun, Yong, & Mathew, Joseph (2007) Effects of Preventive Maintenance on the reliability of production lines. In 2007 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2007), 3-5 December 2007, Singapore.

156

Ma, Lin, Sun, Yong, Zhang, Liqun, & Zhang, Sheng (2008) Smarter and more scientific: A decision support system for integrated asset management. In Sondalini, M (Ed.) Proceedings of the ICOMS Asset Management Conference 2008, 26 -29 May 2008, Australia, Western Australia, Freemantle.

McAuliffe, Marisha B., Hargreaves, Douglas J., Winter, Abigail J., & Chadwick, Gary (2008) Does pedagogy still rule? In 19th Annual Conference of Australasian Association for Engineer Education, 7-10 December 2008, Central Queensland University, Yeppoon.

226

Milne, Craig & Thomas, Jennifer A. (2008) Are your foundations sound? Information literacy and the building of holistic professional practitioners. In 19th Annual Conference for the Australasian Association for Engineering Education: To Industry and Beyond, 7-10th December 2008, Yeppoon, Queensland.

142

Milne, Craig, Thomas, Jennifer A., & Dawson, Graham C. (2009) Sampling perceptions; testing reality : an evidence-based approach to measurably improve information literacy and student research skills. In Proceedings of the 2009 AAEE Conference, Adelaide, The University of Adelaide, Adelaide.

172

Murphy, Glen D. & Salomone, Sonia (2010) Using Enterprise 2.0 tools to facilitate knowledge transfer in complex engineering environments. [Working Paper] (Unpublished)

268

Murray, Martin H. (2011) Creating global networks through an online engineering graduate program. European Journal of Engineering Education, 36(1), pp. 97-106.

R

Rakotonirainy, Andry, Feller, Frank, & Haworth, Narelle L. (2009) In-vehicle avatars to elicit social response and change driving behaviour. International Journal of Technology and Human Interaction, 5(4), pp. 80-104.

Rakotonirainy, Andry, Feller, Frank, & Haworth, Narelle L. (2008) Using in-vehicle avatars to prevent road violence. In Pervasive 2008, 19-22 May 2008, Sydney, Australia.

166

S

Senadji, Bouchra & Dawes, Les A. (2010) Effect of group formation on performance, task management and social loafing. In Proceedings of the 21st Annual Australasian Association for Engineering Education Conference (AaeE2010) : Past, Present, Future, University of Technology, Sydney, University of Technology, Sydney, pp. 64-69.

Sitte, Joaquin & Winzer, Petra (2005) Demand Compliant Design of Robotic Systems. In Sun, Y, Wang, Z, & Yu, Y (Eds.) IEEE Interanational Conference on Mechatronics and Automation, 29 July - 1 August 2005, Canada, Niagara Falls.

Sitte, Joaquin & Winzer, Petra (2007) Methodic Design of Robot Vision Systems. In International Conference on Mechatronics and Automation, 2007 (ICMA 2007), 5-8 August 2007, Harbin, China.

131

Sitte, Joaquin & Winzer, Petra (2008) Systematic design of Complex Artefacts: Robot Vision. International Journal of Information Acquisition, 5(1), pp. 51-63.

Situ, Rong, Hibiki, Takashi, Brown, Richard J., Hazuku, Tatsuya, & Takamasa, Tomoji (2011) Flow regime transition criteria for two-phase flow at reduced gravity conditions. International Journal of Multiphase Flow, 37(9), pp. 1165-1177.

Sun, Yong, Ma, Lin, & Mathew, Joseph (2007) Prediction of system reliability for multiple component repairs. In 2007 IEEE International Conference on Industrial Engineering and Engineering Management, 2-5 December 2007, Singapore.

117

Sun, Yong, Ma, Lin, Robinson, Warwick, & Fidge, Colin J. (2010) Using decision trees in economizer repair decision making. In Pecht, M. (Ed.) Prognostics and System Health Management Conference, 2010 (PHM '10), IEEE, University of Macau, China, pp. 1-6.

T

Tom, Mary & Sitte, Joaquin (2007) Home Automation: Technology Push and Real User Needs. In Winzer, Petra (Ed.) Zukunftsorientiertes QMS. Shaker Verlag GmbH, pp. 25-36.

Trevethan, Mark, Chanson, Hubert, & Brown, Richard J. (2006) Series of Detailed Turbulence Measurements in a Small Subtropical Estuarine System.

108

Tunnicliff, Deborah J. (2003) The safety and effectiveness of emergency vehicle lighting. In Road Safety Research, Policing and Education Conference, 24-26 September, Sydney, Australia.

3,483

W

Wallace, Sam (2009) I am an engineer. (Unpublished)

Z

Zhang, Sheng, Mathew, Joseph, Ma, Lin, & Sun, Yong (2004) A novel approach for integrated fault diagnosis based on wavelet packet transform. Acoustics Australia, 32(1), pp. 5-8.

This list was generated on Sat Feb 11 07:15:40 2012 EST.

Export as	RSS 1.0 Atom RSS 2.0