Items where Subject is "Australian and New Zealand Standard Research Classification > BUILT ENVIRONMENT AND DESIGN (120000) > ENGINEERING DESIGN (120400) > Engineering Design Methods (120403)"
|Up a level|
- Subjects classification (48321)
- Australian and New Zealand Standard Research Classification (48321)
Group by: Authors/Creators | Item Type
Number of items at this level: 30.
Baleshan, Balachandren & Mahendran, Mahen (2016) Experimental study of light gauge steel framing floor systems under fire conditions. Advances in Structural Engineering, 20(3), pp. 426-445.
Baleshan, Balachandren & Mahendran, Mahen (2010) Full scale fire tests of a new light gauge steel floor-ceiling system. In 4th International Conference on Steel & Composite Structures, 21- 23 July 2010, Sydney’s Powerhouse Museum, Sydney.
Baleshan, Balachandren & Mahendran, Mahen (2016) Numerical study of high strength LSF floor systems in fire. Thin-Walled Structures, 101(April), pp. 85-99.
Brereton, Margot (2004) Distributed cognition in engineering design : negotiating between abstract and material representations. In Goldschmidt, Gabriela & Porter, William L. (Eds.) Design representation. Springer, United States of America, New York, pp. 83-103.
Camacho, Tiago, Foth, Marcus, Rakotonirainy, Andry, & Rittenbruch, Markus (2017) Understanding urban rail in-vehicle activities: An activity theory approach. Transportation Research Part F: Traffic Psychology and Behaviour, 46(Part A), pp. 70-86.
Chan, S.L. & Iu, C.K. (2006) On the advanced analysis of steel frames allowing for flexural, local and lateral-torsional buckling. Steel Structures, 6, pp. 121-127.
Chan, Y.K., Iu, C.K., Chan, S.L., & Albermani, F.G. (2010) Performance-based structural fire design of steel frames using conventional computer software. Steel and Composite Structures, 10(3), pp. 207-222.
Davis, Lloyd E. & Bunker, Jonathan M. (2010) Determining heavy vehicle suspension health from vibratory wheel loads. In The HVTT11 International Heavy Vehicle Symposium, 14-17 March 2010, Melbourne, Victoria.
Davis, Lloyd E. & Bunker, Jonathan M. (2009) Dynamic load sharing for heavy vehicles : a new metric. Road and Transport Research, 18(4), pp. 23-37.
Davis, Lloyd E. & Bunker, Jonathan M. (2010) Static accuracy and precision of heavy vehicle on-board mass systems. In HVTT11 International Heavy Vehicle Symposium, 14-17 March 2010, State Library of Victoria, Melbourne, Victoria.
Davis, Lloyd E., Bunker, Jonathan M., Karl, Charles, & Cai, David (2010) Dynamic analysis of on-board mass data to determine tampering in heavy vehicle on-board mass systems. In Proceedings of the HVTT11 International Heavy Vehicle Symposium, State Library of Victoria, Melbourne, Victoria.
Hadgraft, Roger, Desha, Cheryl, Stasinopoulos, Peter, & Hargroves, Karlson (2012) Engineering Design. In Dowling, David, Carew, Anna, & Hadgraft, Roger (Eds.) Engineering Your Future : An Australasian Guide, 2nd Edition. John Wiley and Sons Australia, Milton, Qld..
Iu, C.K. & Bradford, M.A. (2012) Higher-order non-linear analysis of steel structures. Part I : elastic second-order formulation. Advanced Steel Construction, 8(2), pp. 168-182.
Iu, C.K. & Bradford, M.A. (2012) Higher-order non-linear analysis of steel structures. Part II : refined plastic hinge formulation. Advanced Steel Construction, 8(2), pp. 183-198.
Iu, C.K., Chen, W.F., Chan, S.L., & Ma, T.W. (2008) Direct second-order elastic analysis for steel frame design. KSCE Journal of Civil Engineering, 12(6), pp. 379-389.
Johnson, Daniel M., Clarkson, John, & Huppert, Felicia (2010) Capability measurement for Inclusive Design. Journal of Engineering Design, 21(2-3), pp. 275-288.
Jupp, Julie R. & Nepal, Madhav (2014) BIM and PLM: Comparing and Learning from Changes to Professional Practice Across Sectors. In Fukuda, Shuichi, Bernard, Alain, Gurumoorthy, Balan, & Bouras, Abdelaziz (Eds.) Product Lifecycle Management for a Global Market: 11th IFIP WG 5.1 International Conference, PLM 2014, Yokohama, Japan, July 7-9, 2014, Revised Selected Papers. Springer Berlin Heidelberg, pp. 41-50.
Kenny, Jillian, Desha, Cheryl, Kumar, Arun, & Hargroves, Charlie (2012) Using biomimicry to inform urban infrastructure design that addresses 21st century needs. In 1st International Conference on Urban Sustainability and Resilience: Conference Proceedings, UCL London, London, UK.
Langdon, Pat, Johnson, Daniel M., Huppert, Felicia, & Clarkson, P John (2015) A framework for collecting inclusive design data for the UK population. Applied Ergonomics, 46(B), pp. 318-324.
Liu, Lei, Miller, Wendy, & Ledwich, Gerard (2016) Community centre improvement to reduce air conditioning peak demand. In Miller, Wendy, Connie, Susilawati, & Manley, Karen (Eds.) Healthy Housing 2016: Proceedings of the 7th International Conference on Energy and Environment of Residential Buildings, Queensland University of Technology, Queensland University of Technology, Brisbane, Qld, pp. 279-288.
Mason, Matthew S. (2010) Cyclone Tracy : a case study on adapting building regulations to minimise the impact of extreme wind events. In Climate Adaptation Futures, 29 June - 1 July 2010, Gold Coast, Australia.
Mason, Matthew S., Haynes, Katharine, & Walker, George (2013) Cyclone Tracy and the road to improving wind-resistant design. In Boulter, Sarah, Palutikof, Jean, Karoly, David, & Guitart, Daniela (Eds.) Natural Disasters and Adaptation to Climate Change. Cambridge University Press, Cambridge, pp. 87-94.
Mason, Matthew S. & Haynes, Katherine (2010) Adaptation lessons from cyclone Tracy. National Climate Change Adaptation Research Facility, Gold Coast.
Mason, Matthew S., Phillips, Emma, Okada, Tetsuya, & O’Brien, James (2012) Analysis of damage to buildings following the 2010–11 Eastern Australia floods. National Climate Change Adaptation Research Facility, Gold Coast.
Moragaspitiya, Praveen, Thambiratnam, David P., Perera, Nimal, & Chan, Tommy H.T. (2010) Infrastructure sustainability : differential axial shortening of concrete structures. In Yigitcanlar, Tan (Ed.) Rethinking Sustainable Development : Urban Management, Engineering, and Design. IGI Global, Hershey, PA.
Nouri, Nouri F. & Marshall, Robert (2012) Innovate triple constraints model for better construction projects results. In Australasian Structural Engineering Conference 2012: The past, present and future of Structural Engineering, Engineers Australia, Perth Convention and Exhibition Centre, Perth, Western Australia, pp. 106-113.
Pilehchian, Behzad, Staub-French, Sheryl, & Nepal, Madhav Prasad (2015) A conceptual approach to track design changes within a multi-disciplinary BIM environment. Canadian Journal of Civil Engineering, 42(2), pp. 139-152.
Smith, Michael H., Hargroves, Karlson 'Charlie', & Desha, Cheryl (2010) Cents and Sustainability : Securing Our Common Future by Decoupling Economic Growth from Environmental Pressures. Earthscan/Routledge, London.
Stasinopoulos, Peter, Smith, Michael, Hargroves, Karlson, & Desha, Cheryl (2009) Whole System Design : An Integrated Approach to Sustainable Engineering. Earthscan, London.
Waller, Sam, Goodman-Dean, Joy, Langdon, Pat, Johnson, Daniel M., & Clarkson, P John (2009) Developing a method for assessing product inclusivity. In Proceedings of ICED 09, the 17th International Conference on Engineering Design, Volume 5: Design Methods and Tools, Part 1, Design Society, Stansford, Calif., pp. 335-346.