Load-Displacement Behaviour and a Parametric Study of Hybrid Rubberised Concrete Double-Skin Tubular Columns

Rubberised concrete has emerged as a material of interest to the research community with the mission of creating sustainable structural members and decreasing the burden of waste tyre rubber. The potential benefits of replacing natural aggregates with rubber particles to obtain greater energy absorption and ductility are proven in the literature. To negate the reduction in capacity due to the addition of rubber particles, single- and double-skin confinements were proposed and successfully tested by researchers. Hybrid rubberised double-skin tubular columns (RuDSTCs) were recently trialled and tested by the authors. Each of these hybrid RuDSTCs had a filament-wound carbon fibre-reinforced polymer (CFRP) outer tube and an inner steel tube with rubberised concrete as the sandwich material between the two tubes. To explore the axial behaviour of such a column, this paper develops a finite element modelling strategy and carries out a comprehensive parametric study of the hybrid RuDSTC with 0%, 15%, and 30% combined aggregates replaced with rubber particles. This methodology is validated by experimental results, and a good agreement is found. Hybrid RuDSTC models are developed in four groups with different material and geometric parameters, in addition to those corresponding to the experimentally tested column, to explore the effects of the thickness ratio, hollow ratio, steel tube yield strength, and CFRP tube diameter with a special focus on the transition of the characteristic bilinear stress–strain curve of the hybrid RuDSTCs. The results show the smooth transition of the stress–strain curve with increasing rubber content after the yielding of steel, which indicates better ductility of the rubberised columns. The novel hybrid RuDSTCs can provide a promising sustainable solution with greater capacity compared with their unconfined counterparts. Better strain and enhanced ductility of the hybrid RuDSTCs compared with non-rubberized hybrid DSTCs enable their use in seismic-prone regions and mining infrastructure.