QUT Home
Contact
Home
Browse
About
Login
Browse by Supervisor: Yarlagadda, Prasad
Up a level
Export as
ASCII Citation
Access and License Indicators
BibTeX
Download and Citation Statistics (CSV)
Dublin Core
EP3 XML
EndNote
JSON-LD
Simple eprint (JSON)
Atom
RSS 1.0
RSS 2.0
Jump to:
PhD
|
Master of Philosophy
|
Masters by Research
Number of items:
43
.
PhD
Amaya Catano, Jorge Alberto
(2024)
A 3D printed hydrogel microfluidic vascular model for studying the interplay between atherogenic hemodynamics and vascular cells.
PhD thesis, Queensland University of Technology.
74
Xiang, Yuqiao
(2024)
Biomechanical analysis of carotid arteries based on ultrasound and MRI.
PhD by Publication, Queensland University of Technology.
51
Alsbua, Reham Abdullah Sanad
(2023)
Minimisation of fresh produce loss in the fresh food supply chain.
PhD thesis, Queensland University of Technology.
246
Senevirathne, S W Mudiyanselage Amal Ishantha
(2022)
Effect of fluid flow on bacterial attachment, detachment, and viability on nanostructured surfaces.
PhD thesis, Queensland University of Technology.
71
Velic, Amar
(2021)
Mechanics of bacterial interaction and geometry enhancement on nanopatterned surfaces.
PhD thesis, Queensland University of Technology.
74
Shahali, Hesam
(2020)
Assessment of the bactericidal effect of biomimicked nanopillars of cicada wings on titanium implants.
PhD thesis, Queensland University of Technology.
192
Ekanayake, R M Thushara Chaminda Bandara
(2020)
Fault diagnosis: A distributed model-based approach for safety-critical complex reactive systems with hybrid dynamics.
PhD thesis, Queensland University of Technology.
232
Asgari, Mohammad
(2020)
On the potential of Mg micro-wires for the reinforcement of collagen-based barrier membrane for ridge augmentation: Structure design, dose optimisation, and surface modification.
PhD by Publication, Queensland University of Technology.
226
Paritala, Phani Kumari
(2019)
Atherosclerotic plaque tissue characterization by combining imaging, pathological and mechanical analysis.
PhD thesis, Queensland University of Technology.
252
Kambo, Amrita
(2019)
Regenerative sustainability in the design of built environment for Eastern subtropical Australia.
PhD thesis, Queensland University of Technology.
299
Alodhaibi, Sultan Sulaiman
(2019)
Strategic and operational issues in the integrated management of an airport: An operations management approach.
PhD thesis, Queensland University of Technology.
345
Afhea, Jaggessar Alka
(2019)
A study of nanotextured surface production for bactericidal surfaces on orthopaedic implants using the hydrothermal method.
PhD thesis, Queensland University of Technology.
221
Bevrani, Bayan
(2018)
Multi-criteria capacity assessment and planning models for multi-modal transportation systems.
PhD thesis, Queensland University of Technology.
165
The, Jaya Suteja
(2016)
Time-driven life cycle cost estimation system for product family design.
PhD thesis, Queensland University of Technology.
103
Farr, Anna C.
(2016)
Understanding wayfinding: A Bayesian network approach.
PhD by Publication, Queensland University of Technology.
139
Amarathunga Arachchige, Jayani Prithimala
(2015)
Automated fit assessment of intramedullary nail designs during insertion.
PhD thesis, Queensland University of Technology.
26
Li, Tong
(2015)
Cross-scale biophysics modelling of F-actin cytoskeleton in cell.
PhD by Publication, Queensland University of Technology.
170
Sokhanvar, Shahram
(2015)
Investigating the role of knowledge management at various maturity levels of project management office.
PhD thesis, Queensland University of Technology.
772
Harith, Hazreen Haizi
(2014)
Clinically-based automatic implant fitting for shape optimization of fracture fixation plates.
PhD thesis, Queensland University of Technology.
61
Shirmohammadi, Maryam
(2014)
Process modelling and simulation of tissue damage during mechanical peeling of pumpkin as a tough skinned vegetable.
PhD thesis, Queensland University of Technology.
750
Xu, Jingxin
(2014)
Unusual event detection in crowded scenes.
PhD thesis, Queensland University of Technology.
325
Malekani, Javad
(2014)
A novel and innovative technique for deformation of pre-contoured fracture fixation plates in orthopaedic surgery.
PhD thesis, Queensland University of Technology.
661
Ma, Wenbo
(2013)
Agent-based model of passenger flows in airport terminals.
PhD thesis, Queensland University of Technology.
1,143
Zhan, Haifei
(2013)
Numerical characterization of the mechanical properties of metal nanowires.
PhD thesis, Queensland University of Technology.
1,213
Gorjian, Nima
(2012)
Asset health prediction using the explicit hazard model.
PhD thesis, Queensland University of Technology.
842
Ahsan, Mohammed
(2012)
Thermally evaporated tungsten oxide (WO3) thin films for gas sensing applications.
PhD thesis, Queensland University of Technology.
2,914
Kaduruwane, Indika Ranasinghe
(2012)
An empirical investigation of health information system failure in regional Sri Lanka.
PhD thesis, Queensland University of Technology.
3,571
Wiliem, Leonard
(2008)
Incorporating interdependence in risk likelihood analysis to enhance diagnostics in condition monitoring.
PhD thesis, Queensland University of Technology.
1,433
Posinasetti, Praveen
(2007)
Process modelling and control of pulse gas metal arc welding of aluminum.
PhD thesis, Queensland University of Technology.
Emadi, Bagher
(2006)
Experimental studies and modelling of innovative peeling processes for tough-skinned vegetables.
PhD thesis, Queensland University of Technology.
11,148
Stoynov, Lou A.
(2006)
System development and studies on utilization of concentrated solar beam radiation for polymer processing.
PhD thesis, Queensland University of Technology.
4,986
Master of Philosophy
Shirmohammadi, Mahsa
(2024)
Exploring STEM disciplinary differences in students' university study decisions.
Master of Philosophy thesis, Queensland University of Technology.
114
Hassan, Ali
(2023)
Techno-economic and environmental assessment of a V-groove double-pass solar air dryer with thermal storage.
Master of Philosophy by Publication, Queensland University of Technology.
109
Masters by Research
El Samra, Rami
(2017)
How digital communications impact passenger facilitation at hub airports with particular emphasis on transfer passengers.
Masters by Research thesis, Queensland University of Technology.
1,988
Iyigunlu, Serter
(2015)
Agent-based modelling and simulation of airplane boarding processes.
Masters by Research thesis, Queensland University of Technology.
305
Bevrani, Bayan
(2015)
Capacity determination and expansion models for rail networks.
Masters by Research thesis, Queensland University of Technology.
745
Brodie, Paul J.
(2015)
A framework for sustainable energy reduction in modern breweries.
Masters by Research thesis, Queensland University of Technology.
784
Cheng, Lin
(2014)
Modelling airport passenger group dynamics using an agent-based method.
Masters by Research thesis, Queensland University of Technology.
920
7
Gogineni, Jyothsna
(2012)
An ingenious decision support system for remote health monitoring of pregnant women.
Masters by Research thesis, Queensland University of Technology.
1,233
Lingamaneni, Srimanth
(2010)
Modelling and execution of asset management process via workflow automation.
Masters by Research thesis, Queensland University of Technology.
6,154
Mar, Nang Seng Siri
(2010)
Vision-based classification of solder joint defects.
Masters by Research thesis, Queensland University of Technology.
4,281
Fox, James P.
(2007)
Downtime reduction analysis of the Australia Post flat mail optical character reader.
Masters by Research thesis, Queensland University of Technology.
1,743
Blom, Ricky J
(2005)
Production and evaluation of rapid tooling for electric discharge machining using electroforming and spray metal deposition techniques.
Masters by Research thesis, Queensland University of Technology.
1,278
This list was generated on
Sun Aug 4 07:48:28 2024 AEST
.