Scaffold-guided bone regeneration in large volume tibial segmental defects

Henkel, Jan, , Berner, Arne, , , , , , Knackstedt, Mark, , & (2021) Scaffold-guided bone regeneration in large volume tibial segmental defects. Bone, 153, Article number: 116163.

View at publisher

Description

Large volume losses in weight bearing long bones are a major challenge in clinical practice. Despite multiple innovations over the last decades, significant limitations subsist in current clinical treatment options which is driving a strong clinical demand for clinically translatable treatment alternatives, including bone tissue engineering applications. Despite these shortcomings, preclinical large animal models of large volume segmental bone defects to investigate the regenerative capacity of bone tissue engineering strategies under clinically relevant conditions are rarely described in literature. We herein present a newly established preclinical ovine animal model for the treatment of XL volume (19 cm3) segmental tibial defects. In eight aged male Merino sheep (age > 6 years) a mid-diaphyseal tibial segmental defect was created and stabilized with a 5.6 mm Dynamic Compression Plate (DCP). We present short-term (3 months) and long-term (12–15 months) results of a pilot study using medical grade Polycaprolactone-Tricalciumphosphate (mPCL-TCP) scaffolds combined with a dose of 2 mg rhBMP-7 delivered in Platelet-Rich- Plasma (PRP). Furthermore, detailed analyses of the mechanical properties of the scaffolds as well as interfragmentary movement (IFM) and DCP-surface strain in vitro and a comprehensive description of the surgical and post-surgery protocol and post-mortem analysis is given.

Impact and interest:

29 citations in Scopus
18 citations in Web of Science®
Search Google Scholar™

Citation counts are sourced monthly from Scopus and Web of Science® citation databases.

These databases contain citations from different subsets of available publications and different time periods and thus the citation count from each is usually different. Some works are not in either database and no count is displayed. Scopus includes citations from articles published in 1996 onwards, and Web of Science® generally from 1980 onwards.

Citations counts from the Google Scholar™ indexing service can be viewed at the linked Google Scholar™ search.

Full-text downloads:

104 since deposited on 25 Nov 2021
52 in the past twelve months

Full-text downloads displays the total number of times this work’s files (e.g., a PDF) have been downloaded from QUT ePrints as well as the number of downloads in the previous 365 days. The count includes downloads for all files if a work has more than one.

ID Code: 226458
Item Type: Contribution to Journal (Journal Article)
Refereed: Yes
ORCID iD:
Medeiros Savi, Flaviaorcid.org/0000-0003-0067-8308
Saifzadeh, Siamakorcid.org/0000-0002-0295-7477
Steck, Rolandorcid.org/0000-0002-8791-1709
Epari, Devakar R.orcid.org/0000-0002-9306-709X
Woodruff, Maria A.orcid.org/0000-0002-4909-5288
Schuetz, Michael A.orcid.org/0000-0003-2808-0631
Hutmacher, Dietmar W.orcid.org/0000-0001-5678-2134
Additional Information: Funding Information: We would like to thank the staff of the Queensland University of Technology Medical Engineering Research Facility (MERF) for assistance and administrative and technical support. We thank the Queensland University of Technology (QUT) Biofabrication and Tissue Morphology Group and QUT CARF Histology Facility for helping with the preparation of the histological specimen. We thank Cameron Black for helping with processing the histological samples. We also would like to thank Dr. med. Markus Laubach for editing the biomechanical testing image. This research was supported by The Australian Research Council Industrial Transformation Training Center in Additive Biomanufacturing [grant number IC160100026]; and the ARC Industrial Transformation Training Centre (ARC ITTC) for Multiscale 3D Imaging, Modelling and Manufacturing [grant number IC180100008]. A part of this work was supported by funding through the German Research Foundation [Grants BE 4492/1-2 and HE 7074/1-1].
Measurements or Duration: 15 pages
Keywords: Bone morphogenetic protein, Bone tissue engineering, Large volume bone defect, Ovine, Polycaprolactone, Preclinical animal model, Scaffold, Sheep
DOI: 10.1016/j.bone.2021.116163
ISSN: 8756-3282
Pure ID: 101962712
Divisions: Current > Research Centres > Centre for Behavioural Economics, Society & Technology
Current > Research Centres > Centre for Biomedical Technologies
Current > Research Centres > Centre for Transformative Biomimetics in Bioeng
Current > Research Centres > Centre for Healthcare Transformation
Current > QUT Faculties and Divisions > Academic Division
Current > QUT Faculties and Divisions > Faculty of Business & Law
Current > QUT Faculties and Divisions > Faculty of Engineering
Current > Schools > School of Mechanical, Medical & Process Engineering
Current > QUT Faculties and Divisions > Faculty of Health
Funding Information: We would like to thank the staff of the Queensland University of Technology Medical Engineering Research Facility (MERF) for assistance and administrative and technical support. We thank the Queensland University of Technology (QUT) Biofabrication and Tissue Morphology Group and QUT CARF Histology Facility for helping with the preparation of the histological specimen. We thank Cameron Black for helping with processing the histological samples. We also would like to thank Dr. med. Markus Laubach for editing the biomechanical testing image. This research was supported by The Australian Research Council Industrial Transformation Training Center in Additive Biomanufacturing [grant number IC160100026]; and the ARC Industrial Transformation Training Centre (ARC ITTC) for Multiscale 3D Imaging, Modelling and Manufacturing [grant number IC180100008]. A part of this work was supported by funding through the German Research Foundation [Grants BE 4492/1-2 and HE 7074/1-1]. This research was supported by The Australian Research Council Industrial Transformation Training Center in Additive Biomanufacturing [grant number IC160100026 ]; and the ARC Industrial Transformation Training Centre (ARC ITTC) for Multiscale 3D Imaging, Modelling and Manufacturing [grant number IC180100008 ]. A part of this work was supported by funding through the German Research Foundation [Grants BE 4492/1-2 and HE 7074/1-1 ].
Funding:
Copyright Owner: Crown Copyright 2021.
Copyright Statement: This work is covered by copyright. Unless the document is being made available under a Creative Commons Licence, you must assume that re-use is limited to personal use and that permission from the copyright owner must be obtained for all other uses. If the document is available under a Creative Commons License (or other specified license) then refer to the Licence for details of permitted re-use. It is a condition of access that users recognise and abide by the legal requirements associated with these rights. If you believe that this work infringes copyright please provide details by email to qut.copyright@qut.edu.au
Deposited On: 25 Nov 2021 22:51
Last Modified: 28 Jul 2024 12:00